Critical dispersion of chirped fiber Bragg grating for eliminating time delay signature of distributed feedback laser chaos

Optical chaos has attracted widespread attention owing to its complex dynamic behaviors.However,the time delay signature(TDS)caused by the external cavity mode reduces the complexity of optical chaos.We propose and numerically demonstrate the critical dispersion of chirped fiber Bragg grating(CFBG)for eliminating the TDS of laser chaos in this work.The critical dispersion,as a function of relaxation frequency and bandwidth of the optical spectrum,is found through extensive dynamics simulations.It is shown that the TDS can be eliminated when the dispersion of CFBG is above this critical dispersion.In addition,the influence of dispersive feedback light and output light from a laser is investigated.These results provide important quantitative guidance for designing chaotic semiconductor lasers without TDS.

Multiwavelength Actively Mode-locked Fiber Laser with a Double-ring Configuration and Integrated Cascaded Sampled Fiber Bragg Gratings

A modified multiwavelength actively mode-locked fiber ring laser is proposed and experimentally demonstrated. In this kind of laser, stable multiwavelengths lasing is achieved by integrating cascaded sampled fiber Bragg gratings(SFBGs) into the laser cavity. To implement actively mode-locking technique, a double-ring cavity configuration is used to assure that the cavity lengths for all wavelengths lasing are identical. Thus, simultaneous mode locking of all wavelengths has been successfully achieved by using the same mode-locking signal.

Encrypted optical fiber tag based on encoded fiber Bragg grating array

Optical fibers are typically used in telecommunications services for data transmission,where the use of fiber tags is essential to distinguish between the different transmission fibers or channels and thus ensure the working functionality of the communication system.Traditional physical entity marking methods for fiber labeling are bulky,easily confused,and,most importantly,the label information can be accessed easily by all potential users.This work proposes an encrypted optical fiber tag based on an encoded fiber Bragg grating(FBG)array that is fabricated using a point-by-point femtosecond laser pulse chain inscription method.Gratings with different resonant wavelengths and reflectivities are realized by adjusting the grating period and the refractive index modulations.It is demonstrated that a binary data sequence carried by a fiber tag can be inscribed into the fiber core in the form of an FBG array,and the tag data can be encrypted through appropriate design of the spatial distributions of the FBGs with various reflection wavelengths and reflectivities.The proposed fiber tag technology can be used for applications in port identification,encrypted data storage,and transmission in fiber networks.

Spectral Beam Combining of Fiber Lasers by Using Reflecting Volume Bragg Gratings

By employing three reflecting volume Bragg gratings, a near-infrared 4-channel spectral-beam-combining system is demonstrated to present 720 W combined power with a combining efficiency of 94.7%. The combined laser beam is near-diffraction-limited with a beam factor M^2-1.54. During this 4-channel beam-combining process, no special active cooling measures are used to evaluate the volume Bragg gratings as combining elements are under the higher power laser operation. Thermal expansion and period distortion are verified in a 2 k W 2-channel beam-combining process, and the heat issue in the transmission case is found to be more remarkable than that in the diffraction e-se. Transmitted and diffracted beams experience wave-front aberrations with different degrees, thus leading to distinct beam deterioration.

Advances in femtosecond laser direct writing of fiber Bragg gratings in multicore fibers:technology,sensor and laser applications

In this article,we review recent advances in the technology of writing fiber Bragg gratings(FBGs)in selected cores of multicore fibers(MCFs)by using femtosecond laser pulses.The writing technology of such a key element as the FBG opens up wide opportunities for the creation of next generation fiber lasers and sensors based on MCFs.The advantages of the technology are shown by using the examples of 3D shape sensors,acoustic emission sensors with spatially multiplexed channels,as well as multicore fiber Raman lasers.

Lateral characteristics improvements of DBR laser diode with tapered Bragg grating

Broad area semiconductor laser(BAL)has poor lateral beam quality due to lateral mode competition,which limits its application as a high-power optical source.In this work,the distributed Bragg reflector laser diode with tapered grating(TDBR-LD)is studied.By changing the lateral width,the tapered grating increases the loss of high-order lateral modes,thus improving the lateral characteristics of the laser diode.The measuring results show that the TDBR-LD can achieve a single-lobe output under 0.9 A.In contrast to the straight distributed Bragg reflector laser diode(SDBR-LD),the lateral far field divergence of TDBR-LD is measured to be 5.23°at 1 A,representing a 17%decline.The linewidth of TDBR-LD is 0.4 nm at 0.2 A,which is reduced by nearly 43%in comparison with that of SDBR-LD.Meanwhile,both of the devices have a maximum output power value of approximate 470 mW.

Femtosecond laser direct written fiber Bragg gratings with narrow bandwidth and high sideband suppression

Aiming for suppressing side-mode and spectrum broadening,a slit beam-shaping method and super-Gaussian apodization processing for femtosecond laser point-by-point(PbP)inscription technology of fiber Bragg gratings(FBGs)are reported here.High-quality FBGs,featuring narrow bandwidth of less than 0.3 nm,high reflectivity above 85%,low insertion loss(0.21 dB),and low cladding loss(0.82 dB),were obtained successfully.By a semi-automatic PbP inscription process,an array consisting of six FBGs,exhibiting almost no side-mode peaks with high suppression ability and narrow bandwidth,was fabricated along three independently developed single-mode fibers with an interval of 20 mm.

UV-Inscribed Optical Fiber Gratings in Mid-IR Range and Their Laser Applications

We have UV-inscribed fiber Bragg gratings （FBGs）, long-period gratings （LPGs） and tilted fiber gratings （TFGs） into mid-IR 2μm range using three common optical fiber grating fabrication techniques （two-beam holographic, phase mask and point-by-point）. The fabricated FBGs have been evaluated for thermal and strain response. It has been revealed that the FBG devices with responses in mid-IR range are much more sensitive to temperature than that in near-IR range. To explore the unique cladding mode coupling function, we have investigated the thermal and refractive index sensitivities of LPGs and identified that the coupled cladding modes in mid-IR range are also much more sensitive to temperature and surrounding medium refractive index change. The 45° tilted fiber gratings （45°-TFGs） as polarizing devices in mid-IR have been investigated for their polarization extinction characteristics. As efficient reflection filters and in-cavity polarizers, the mid-IR FBGs and 45°-TFGs have been employed in fiber laser cavity to realize multi-wavelength 2μm Tm-doped CW and mode locked fiber lasers, respectively.

Fiber oscillator of 5 kW using fiber Bragg gratings inscribed by a visible femtosecond laser

We fabricate a pair of fiber Bragg gratings(FBGs)by a visible femtosecond laser phase mask scanning technique on passive large-mode-area double-cladding fibers for multi-kilowatt fiber oscillators.The bandwidth of high-reflection(HR)and lowreflection(LR)FBG is~1.6 nm and 0.3 nm,respectively.The reflection of the HR-FBG is higher than 99%,and that of the LR-FBG is about 10%.A bidirectional pumped all-fiber oscillator is constructed using this pair of FBGs,a record output power of 5027 W located in the signal core is achieved with a slope efficiency of~82.1%,and the beam quality factor M2is measured to be~1.6 at the maximum power.The FBGs are simply fixed on a water cooling plate without a special package,and the thermal efficiency of the HR-FBG and the LR-FBG is 2.76℃/kW and 1℃/kW,respectively.Our research provides an effective solution for robust high-power all-fiber laser oscillators.

Tunable Erbium-Doped Fiber Lasers Using Various Inline Fiber Filters

Several high-performance and tunable erbium-doped fiber lasers are reviewed. They are constructed by using fiber Bragg gratings (FBGs) or short-wavelength-pass filters (SWPFs) as wavelength tunable components inside the laser cavity. Broadband wavelength tuning range including C- and/or S-band was achieved, and tunable laser output with high slope efficiency, high side-mode suppression ratio was obtained. These fiber lasers can find vast applications in lightwave transmission, optical test instrument, fiber-optic gyros, spectroscopy, material processing, biophotonic imaging, and fiber sensor technologies.

2-μm mode-locked nanosecond fiber laser based on MoS_2 saturable absorber

We demonstrated a 2-μm passively mode-locked nanosecond fiber laser based on a MoS2 saturable absorber（SA）.Owing to the effect of nonlinear absorption in the MoS2 SA, the pulse width decreased from 64.7 to 13.8 ns with increasing pump power from 1.10 to 1.45 W. The use of a narrow-bandwidth fiber Bragg grating resulted in a central wavelength and 3-dB spectral bandwidth of 2010.16 and 0.15 nm, respectively. Experimental results show that MoS2 is a promising material for a 2-μm mode-locked fiber laser.

All-fiber Based Er^(3+)∶Yb^(3+) Co-doped Fiber Laser

An all-fiber based Er~ 3+ ∶Yb~ 3+ co-doped double clad fiber laser operating at 1550nm is demonstrated. By using 9m long Er~ 3+ ∶Yb~ 3+ co-doped fiber(EYDF) as the gain medium, and using a pair of fiber Bragg gratings as wavelength filters, the line-width of the output laser is as narrow as 0.2nm and the output power is more than 6mW. The fluorescent effect of the laser before its emission is also studied. And it is found that the Er~ 3+ ∶Yb~ 3+ co-doped double-clad fiber laser also exhibits a high gain for Yb~ 3+ transition near 1080nm.

A self-seeded fiber laser incorporated with a fiber Bragg grating external cavity semiconductor laser

A self-seeded fiber laser incorporated with a fiber Bragg grating external cavity semiconductor laser (FBG-ECL) and a Mach-Zehnder interferometer (MZI) were reported in this paper. The MZI provided a Q-switching with response time in the order of micro-seconds. The FBG-ECL provided narrow pulses as seeds to shorten the Q-switched pulses. Experimentally, pulse width of 0.8 μs was measured, which was one fifth of the pulse width without self-seeding.

Effects of the Facet Reflectivity of a Laser Diode on Fiber Bragg Grating Semiconductor Lasers

Effects of facet reflectivity of a laser diode on the performance of fiber Bragg grating semiconductor lasers are studied experimentally. Facet reflectivity of less than 10-4 is necessary to obtain stable oscillation wavelength.

Multi-wavelength fiber ring laser based on semiconductor optical amplifier and sampled fiber Bragg grating in a Sagnac loop interferometer

Multi-wavelength fiber ring laser based on the semiconductor optical amplifier(SOA)with sampled fiber Bragg grating(SFBG)in a Sagnac loop interferometer as the wavelength-selective filter is proposed.Four lasing wavelengths with 1.8 nm spacing have been generated stably at room temperature.The proposed laser has the advan-tages such as removal of the high-cost circulator,flexibility in channel-spacing tuning,and simple all-optical fiber configuration,which has potential applications in high-capacity wavelength-division-multiplexed(WDM)systems and mechanical sensors.

侧面研磨光纤Bragg光栅的外部折射率敏感特性研究

光纤Bragg光栅对外界折射率的变化不灵敏,无法直接作为气体、液体等的敏感元件.侧面研磨的光纤Bragg光栅,一侧包层减小至几微米,其辐射场可通过包层透射到被传感物质,因而被传感物质的折射率的变化可以改变光纤的有效折射率,从而使光栅的Bragg波长产生位移.实验中利用不同浓度的NaCl溶液来改变光纤光栅的外部折射率,Bragg中心波长的偏移量和浓度近似为线性关系.同时,透射功率的变化量和浓度也近似为线性关系.

基于特殊悬臂梁的光纤Bragg光栅应力传感器

分析了悬臂梁的结构特性及引起Bragg反射中心波长变化的基本原理,设计了具有不同区域应力灵敏度的悬臂梁。利用悬臂梁不同区域光纤Bragg光栅(FBG)的Bragg反射中心波长差实现了一种简单方便的增敏方案。该方案利用这种特殊悬臂梁的自身结构可使测试灵敏度提高将近一倍,而且成功地解决了温度应力交叉敏感的测量难题,消除了温度变化引起的应力测量误差,实现了利用光纤Bragg光栅对应力单参量的测量。

光纤 Bragg 光栅的研究

分析了光纤Ｂｒａｇｇ光栅的特性，讨论了其结构参数。通过紫外光写入的方式，在普通单模光纤上制备了光纤Ｂｒａｇｇ光栅。典型的光纤Ｂｒａｇｇ光栅在１．５６μｍ波段的反射率达９９％，带宽０．６ｎｍ。

光加热光纤光栅阵列液位测量方法研究

安全可靠的液位测量是现代工业领域的重要技术需求之一,提出一种基于光加热光纤光栅阵列的液位测量方法,即利用泵浦光加热掺钴光纤,控制温度场,利用光栅阵列测量温度场分布,由于气液导热性能的差别,气液界面处温度突变,从而确定液位。实验中,将掺钴光纤与密集光栅阵列紧密固定在一起,将1.5 W的泵浦光输入衰减系数分别为0.71 dB/cm和0.28 dB/cm的掺钴光纤中,沿着光传播的方向,温度变化均呈指数函数衰减。液位测量的精度与范围由主要取决于泵浦光功率、掺钴光纤吸收系数,经对比最终选定0.28 dB/cm的掺钴光纤作为液位实验的加热光纤。实验测量了不同液位下的温度场分布,证明了利用测量温度分布来测量液位的可行性,液位变化范围0~88 mm以内的误差为2 mm。所提出的传感系统结构简单,成本低廉,在液位测量方面具有潜在的应用价值。

光纤Bragg光栅的制作及其应用

光纤Bragg光栅是一种新型的光无源器件,伴随着制作技术的成熟,已成为当今的研究热点问题。根据学校对光纤Bragg光栅所开展的研究,该文介绍了光纤Bragg光栅的制作方法、在光纤激光器中的应用以及光纤Bragg光栅传感器测重实验。指出高校应紧紧围绕科技前沿研究开设实验,以达到开阔学生视野,培养社会急需高科技人才的目的。