Fabrication of arbitrarily apodized fiber Bragg gratings with narrow bandwidth

A double-exposure fabrication method without any intensity shadow mask to fabricate arbitrarily apodized fiber Bragg gratings（ FBGs） with narrow bandwidth is demonstrated by controlling the total ultra violet （UV） irradiation along the grating by varying the speed of a translation stage. The UV source used is a stable continuous intracavity frequency-doubled argonion laser. The parameters （such as length, apodization profile, average index change）of FBGs can be easily changed with this method. The total UV irradiation is kept constant in the doubleexposure process because of the precise control of the exposure time, which ensures that the apodized FBG＇s bandwidth can be extremely narrow. The full width at half maximum （FWHM） bandwidth of the 2-cm-long apodized FBG fabricated by this method is 0. 15 nm with a maximum reflectivity of more than 95%.

Monitoring shear deformation of sliding zone via fiber Bragg grating and particle image velocimetry

Monitoring shear deformation of sliding zones is of great significance for understanding the landslide evolution mechanism,in which fiber optic strain sensing has shown great potential.However,the cor-relation between strain measurements of quasi-distributed fiber Bragg grating(FBG)sensing arrays and shear displacements of surrounding soil remains elusive.In this study,a direct shear model test was conducted to simulate the shear deformation of sliding zones,in which the soil internal deformation was captured using FBG strain sensors and the soil surface deformation was measured by particle image velocimetry(PIV).The test results show that there were two main slip surfaces and two secondary ones,developing a spindle-shaped shear band in the soil.The formation of the shear band was successfully captured by FBG sensors.A sinusoidal model was proposed to describe the fiber optic cable deformation behavior.On this basis,the shear displacements and shear band widths were calculated by using strain measurements.This work provides important insight into the deduction of soil shear deformation using soil-embedded FBG strain sensors.

Advances in femtosecond laser direct writing of fiber Bragg gratings in multicore fibers:technology,sensor and laser applications

In this article,we review recent advances in the technology of writing fiber Bragg gratings(FBGs)in selected cores of multicore fibers(MCFs)by using femtosecond laser pulses.The writing technology of such a key element as the FBG opens up wide opportunities for the creation of next generation fiber lasers and sensors based on MCFs.The advantages of the technology are shown by using the examples of 3D shape sensors,acoustic emission sensors with spatially multiplexed channels,as well as multicore fiber Raman lasers.

Irradiation effect on strain sensitivity coefficient of strain sensing fiber Bragg gratings

The effect of irradiation on the strain sensitivity coefficient of strain sensing fiber Bragg gratings （FBGs） has been investigated through experiments. FBGs were fabricated in single mode fibers with 3 tool% Ge-concentration in the core and with a H2-1oading treatment. In experiments, the FBGs were subjected to y-radiation exposures using a Co6~ source at a dose-rate of 25 Gy/min up to a total dose of 10.5 kGy. The GeO defect in fiber absorbs photons to form a GeE＇ defect; the interaction with H2 is a probable reason for the y-radiation sensitivity of gratings written in hydrogen loaded fibres, The effect mechanism of radiation on the strain sensitivity coefficient is similar to that of radiation on the temperature sensitivity coefficient. Radiation affects the effective index neff, which results in the change of the thermo-optic coefficient and the strain-optic coefficient. Irradiation can change the strain sensitivity coefficient of FBGs by 1.48%-2.71%, as well as changing the Bragg wavelength shift （BWS） by 22 pm-25 pm under a total dose of 10.5 kGy. Our research demonstrates that the effect of irradiation on the strain sensitivity coefficient of FBG is small and that strain sensing FBGs can work well in the radiation environment.

Spectral Beam Combining of Fiber Lasers by Using Reflecting Volume Bragg Gratings

By employing three reflecting volume Bragg gratings, a near-infrared 4-channel spectral-beam-combining system is demonstrated to present 720 W combined power with a combining efficiency of 94.7%. The combined laser beam is near-diffraction-limited with a beam factor M^2-1.54. During this 4-channel beam-combining process, no special active cooling measures are used to evaluate the volume Bragg gratings as combining elements are under the higher power laser operation. Thermal expansion and period distortion are verified in a 2 k W 2-channel beam-combining process, and the heat issue in the transmission case is found to be more remarkable than that in the diffraction e-se. Transmitted and diffracted beams experience wave-front aberrations with different degrees, thus leading to distinct beam deterioration.

Engineering approach to in-situ bridge health monitoring with fiber bragg gratings

In this presentation the feasibility and capability of fiber Bragg gratings （FBG） employed in bridge health monitoring are demonstrated on a real bridge. FBG＇ s wavelength shift depending on strain variance has been tested. The technique of FBG installation on bridges has been developed. 12 FBG strain sensors and 3 temperature sensors have been successfully embedded in the prestressed concrete box girder during the construction of Heilongjiang Hulan River Bridge. The prestressing tension process and quasi-static loading process of the girder were monitored with those sensors before it was installed onto the bridge. After the bridge was completed, the FBG sensors embedded have been utilized to monitor the strain shift of the beam under quasi-static load, traffic load and temperature. The results show that the traffic fluxes, possible tatigue damage and deflection of the bridge can be revealed conveniently through strain measurements with these FBG sensors, which provide key information for structural health diagnosis. The fact that the FBG strain sensors have withstood the ordeal of harsh construction process and lasted for more than one year proves that their durability and stability can satisfy the requirements for bridge health monitoring. It is also shown that the FBG strain sensor is more adaptive to long-term structural health monitoring than the electric resistance strain gauge.

Magneto-Optic Fiber Bragg Gratings with Application to High-Resolution Magnetic Field Sensors

Magneto-optic fiber Bragg gratings （MFBG） based on magneto-optic materials have a lot of potential applications for sensing and optical signal processing. The transmission and reflection spectra of guided optical waves in the MFBG are investigated. According to the sensitivity of MFBG spectral lines to the magneto-optic coupling intensity varying with applied magnetic field, a novel magnetic field sensor of high-resolution up to 0.01 nm/（kA/m） is predicted.

Strain-Insensitive Fiber Bragg Grating Composite Structure for Wide-Range Temperature Sensing

This paper reports on the design,fabrication,and temperature strain sensing performance of a fiber Bragg grating composite structure for surface mounted temperature measurements over a wide temperature range,with highly reduced strain cross-sensitivity.The fiber Bragg grating sensor is encapsulated in a polyimide tube filled with epoxy resin,forming an arc-shaped cavity.This assembly is then placed between two layers of glass fiber prepreg with a flexible pad in between and cured into shape.Experimental results,supported by finite element simulations,demonstrate an enhanced temperature sensitivity is 26.3 pm/°C over a wide temperature range of–30°C to 70°C,and high strain transfer isolation of about 99.65%.

Hollow and filled fiber bragg gratings in nano-bore optical fibers

To combine the technical functions and advantages of solid-core fiber Bragg gratings(FBGs) and hollow-core optical fibers(HCFs), the hollow and filled FBGs in nano-bore optical fibers(NBFs) with nano-bore in the GeO2-doped core are proposed.The fundamental mode field, effective mode index, and confinement loss of NBF with 50 nm–7 μm-diameter hollow and filled nano-bore are numerically investigated by the finite element method.The reflected spectra of FBGs in NBFs are obtained by the transmission matrix method.The hollow FBGs in NBFs can be acheived with ~5% power fraction in the bore and the ~0.9 reflectivity when bore diameter is less than 3 μm.The filled FBGs can be realized with^1% power fraction and 0.98 reflectivity with different fillings including o-xylene, trichloroethylene, and chloroform for 800-nm bore diameter.The feasibility of the index sensing by our proposed NBF FBG is also analyzed and discussed.The experimental fabrication of hollow and filled FBGs are discussed and can be achieved by current techniques.The aim of this work is to establish a principle prototype for investigating the HCFs and solid-core FBGs-based fiber-optic platforms,which are useful for applications such as the simultaneous chemical and physical sensing at the same position.

Fiber Bragg Gratings in Small-Core Ge-Doped Photonic Crystal Fibers

This paper reports fiber Bragg gratings （FBGs） inscribed in a small-core Ge-doped photonic crystal fibers with a UV laser and a Talbot interferometer. The responses of such FBGs to temper- ature, strain, bending, and transverse-loading were systematically investigated. The Bragg wavelength of the FBGs shifts toward longer wavelengths with increasing temperature, tensile strain, and transverse-loading. The bending and transverse- loading properties of the FBGs are sensitive to the fiber orientations.

A simulation program for analysing fiber optic Bragg gratings

ＡｓｉｍｕｌａｔｉｏｎｐｒｏｇｒａｍｆｏｒａｎａｌｙｓｉｎｇｆｉｂｅｒｏｐｔｉｃＢｒａｇｇｇｒａｔｉｎｇｓＰｅｔｅｒＫＣＣｈａｎ，Ｗ．Ｄｕ，Ｗ．Ｊｉｎ，Ｍ．Ｓ．Ｄｅｍｏｋａｎ（Ｄｅｐｔ．ｏｆＥｌｅｃｔｒ．Ｅｎｇ．，ＨｏｎｇＫｏｎｇＰｏｌｙｔｅｃｈｎｉ...

Experimental investigation of pre-irradiation effect on radiation sensitivity of temperature sensing fiber Bragg gratings

The effect of pre-irradiation on radiation sensitivity of fiber Bragg gratings （FBGs） is verified experimentally. FBGs are fabricated in photosensitive optical fibers and single mode fibers with Ce-concentration in a range from 3 mol% to 23.37 mol% in the core. In experiments, the FBGs are subjected to twice v-radiation exposures to a Co^60 source at a dose-rate of 0.1 Gy/s up to a total dose of 50 kGy. Pre-irradiation treatment can reduce the temperature sensitivity variation of FBGs by 18.12%-35.91%, as well as Bragg wavelength shift （BWS） by 8%-27.08 %. Our research demonstrates that pre-irradiation treatment is a feasible method to improve the radiation tolerance of FBGs.

Tunable Super-Structured Fiber Bragg Gratings with Perfect Sequences Based on m-Sequence

Recently, a tunable fiber Bragg grating(FBG) was developed by using stress-responsive colloidal crystals. In this paper, we have simulated the application of these nanoparticles into the super-structured fiber Bragg grating(SSFBG) written with perfect sequences derived from a short maximal-length sequence. A tunable SSFBG will be available to overcome the prohibitive temperature variation of the optical codecs. Nevertheless,we presented a method to implement coherent time spreading optical code-division multiple-access(OCDMA) where a unique code(or perfect sequence) can be reused and mixed with different wavelengths to obtain a tunable wavelength-division multiplexing(WDM)system. In order to maximize the binary throughput, we have selected a unique short maximal-length sequence composed of 7 chips that can be tuned with 7 different optical wavelengths. We found thousands of different tunable combinations that presented power contrast ratios(P/C) higher than 12 dB. When a WDM-OCDMA system used 2 different combinations simultaneously, the perfect binary detection with error correction codes was achieved successfully. The tunable SSFBG with colloidal crystals will be a simple and good alternative choice for fiber-to-the-home(FTTH) communications.

Fabrication of High Quality Broadband Type IIA Chirped Fiber Bragg Gratings

Chirped fiber Bragg gratings have found many applications in optical communication and sensing systems. High quality filters based on chirped fiber Bragg gratings with reflection bandwidth of 2.6 and 32nm and high reflectivity are demonstrated experimentally with 2 and 4cm long phase masks, respectively. These filters with flat reflection band and high reflectivity are achieved by writing type IIA chirped Bragg gratings.

Dynamic Single/Dual-channel Filter with Tunable Fiber Bragg Gratings

The shift mechanism of Bragg wavelength with stress variation for a fiber grating is investigated in detail. The influence of strain change on reflection and bandpass is theoretically analyzed. By applying stress, the dynamic single/dual channel filter with tunable fiber Bragg gratings is achieved.

Multiwavelength Actively Mode-locked Fiber Laser with a Double-ring Configuration and Integrated Cascaded Sampled Fiber Bragg Gratings

A modified multiwavelength actively mode-locked fiber ring laser is proposed and experimentally demonstrated. In this kind of laser, stable multiwavelengths lasing is achieved by integrating cascaded sampled fiber Bragg gratings(SFBGs) into the laser cavity. To implement actively mode-locking technique, a double-ring cavity configuration is used to assure that the cavity lengths for all wavelengths lasing are identical. Thus, simultaneous mode locking of all wavelengths has been successfully achieved by using the same mode-locking signal.

Formation Technologies of Fiber Bragg Gratings

The principle of fiber Bragg gratings(FBG) is briefly described. The formation technologies of FBG are systematically given and analyzed. In addition, the experiment is described in detail, e.g.,the phase mask method is used to write directly the period Bragg gratings into the Ge-doped single mode fiber with KrF excimer UV laser. The results of experiment are also presented and analyzed.

Characteristics of Bragg Gratings in All-Solid Photonic Bandgap Fiber

We report on fiber Bragg gratings in all-solid photonie bandgap fiber that was composed of a triangular array of high-index Ge-doped rods in pure silica background with fluorine-doped index-depressed layer surrounding the Ge-doped rod. Fiber Bragg gratings were photowritten with 193 nm ArF excimer laser and characterized for their response to strain, temperature, bending, and torsion. These gratings couple light from the forward core mode to not only backward core mode but also backward rod modes. This results in multiple resonance peaks in the reflection spectrum. All resonance wavelengths exhibited the same temperature and strain response with coefficient similar to that of Bragg gratings in standard single-mode fiber. The strength of the resonance peaks corresponding to the backward rod modes showed high sensitivity to bending and torsion.

Birefringent Bragg Gratings in Highly-Nonlinear Photonic Crystal Fiber

Efficient writing of Bragg gratings in 12-ring highly-nonlinear photonie crystal fibers is described. Experimental and numerical investigations are performed to reveal the optimum angle for coupling UV writing light to the core. Furthermore, we show that the formation of a strongly briefringent grating is at a particular angle of orientation.

双光纤Bragg光栅用于FBG型传感器的温度补偿

理论分析了FBG型传感器的温度应变交叉敏感机制,利用温度和应变响应相同的光栅对实现了光纤Bragg光栅应力/应变传感器的温度补偿,有效的消除了交叉敏感对FBG型传感器测量精度的影响,有利于光纤Bragg光栅传感器的实用化。