Stiffness degradation-based damage model for RC members and structures using fiber-beam elements

To meet the demand for an accurate and highly efficient damage model with a distinct physical meaning for performance-based earthquake engineering applications, a stiffness degradation-based damage model for reinforced concrete （RC） members and structures was developed using fiber beam-column elements. In this model, damage indices for concrete and steel fibers were defined by the degradation of the initial reloading modulus and the low-cycle fatigue law. Then, section, member, story and structure damage was evaluated by the degradation of the sectional bending stiffness, rod-end bending stiffness, story lateral stiffness and structure lateral stiffness, respectively. The damage model was realized in Matlab by reading in the outputs of OpenSees. The application of the damage model to RC columns and a RC frame indicates that the damage model is capable of accurately predicting the magnitude, position, and evolutionary process of damage, and estimating stow damage more precisely than inter-story drift. Additionally, the damage model establishes a close connection between damage indices at various levels without introducing weighting coefficients or force-displacement relationships. The development of the model has perfected the damage assessment function of OpenSees, laying a solid foundation for damage estimation at various levels of a large-scale structure subjected to seismic loading.

Application of the Finite Element Method in the Glass Fiber Bushing Research

Design and optimization of bushing at present mainly use the traditional experience method.The relevant research that adopts computer simulation to carry on the operation behavior of the bushing has appeared in recent years.How to use the finite element method to research bushing was introduced in the article.Physics fields and many relevant parameters of one real bushing were calculated.Through the results of calculation,it indicate that the finite element method is very useful in bushing research of designing and optimizing.

Evaluation of stiffness in a cellulose fiber reinforced epoxy laminates for structural applications:Experimental and finite element analysis

Natural fiber composites have been proved to have the ability to replace the synthetic fiber composites in many structural applications. Unprecedented growth in the field of computational techniques has opened the doors of analysis and simulation of composite materials under various environment.Modelling and simulation using various available softwares saves a lot of time and resources. In the present work, an attempt has been made to analyze the tensile behavior of jute fiber reinforced epoxy based polymer composite materials using the student version of commercially available finite element code Siemens PLM NX 10.0. In most of the structural applications, materials are required to have enough stiffness to resist the shape deformation under normal loading conditions. Therefore, emphasis is given to the load-deformation behavior of the developed composites. A 3-dimensional model of the test specimen was developed using ply-stacking method and the strain-stress values were verified by the available literature. The model showed a good agreement between the experimental and software results. Effect of ply angle, fiber percentage, fiber type, number of layers and weft fiber angle on the stiffness of laminate have been studied.

Portable fiber-optic laser-induced breakdown spectroscopy system for the quantitative analysis of minor elements in steel

In this paper, we developed a portable laser-induced breakdown spectroscopy(LIBS) using an optical fiber to deliver laser energy and used it to quantitatively analyze minor elements in steel.The R^2 factors of calibration curves of elements Mn, Ti, V, and Cr in pig iron were 0.9965,0.9983, 0.9963, and 0.991, respectively, and their root mean square errors of cross-validation were 0.0501, 0.0054, 0.0205, and 0.0245 wt%, respectively. Six test samples were used for the validation of the performance of the calibration curves established by the portable LIBS. The average relative errors of elements Mn, Ti, V, and Cr were 2.5%, 11.7%, 13.0%, and 5.6%,respectively. These results were comparable with most results reported in traditional LIBS in steel or other matrices. However, the portable LIBS is flexible, compact, and robust, providing a promising prospect in industrial application.

Calculation of the Coupling Coefficient of Twin-Core Fiber Based on the Supermode Theory with Finite Element Method

Currently, coupled mode theory (CMT) is widely used for calculating the coupling coefficient of twin-core fibers (TCFs) that are used in a broad range of important applications. This approach is highly accurate for scenarios with weak coupling between the cores but shows significant errors in the strong coupling scenarios, necessitating the use of a more accurate method for coupling coefficient calculations. Therefore, in this work, we calculate the coupling coefficients of TCFs using the supermode theory with finite element method (FEM) that has higher accuracy than CMT, particularly for the strong coupling TCF. To investigate the origin of the differences between the results obtained by these two methods, the modal field distributions of the supermodes of TCF are simulated and analyzed in detail.

NUMERICAL SIMULATION OF 2D FIBER-REINFORCED COMPOSITES USING BOUNDARY ELEMENT METHOD

The boundary dement method was improved for the 2D elastic composites with randomly distributed inclusions. This problem can be reduced to a boundary integral equation for a multi-connected domain. Further, considering the matrices of the tractions and displacements for each group of the identical inclusion were the same, an effective computational scheme was designed, since the orders of the resulting matrix equations can be greatly reduced. Numerical examples indicate that this boundary element method scheme is more effective than the conventional multi-domain boundary element method for such a problem. The present scheme can be used to investigate the effective mechanical properties of the fiber-reinforced composites.

Finite Element Modeling of Stamp Forming Process on Fiber Metal Laminates

Fiber-metal laminates (FMLs) possess huge potential in mass-reduction strategy of automotive industry. In order to understand behavior of FMLs as they undergo stamp forming processes, finite element analyses of surface strain evolutions have been carried out. The simulations provide strains at locations within the layers of an FML, allowing better understanding of forming behavior of the composite layer and its influence on the metal layers. Finite element analyses were conducted on two aluminum-based FMLs with different fiber-reinforced composites and benchmarked against monolithic aluminum alloy. The simulation results indicated that high stiffness of the reinforcement constrains flow of the matrix in the composite layer, which can be attributed to the distinguishing behavior of the FMLs compared to the monolithic aluminum alloy.

Finite Element Modeling of Stamp Forming Process on Thermoplastic-Based Fiber Metal Laminates at Elevated Temperatures

This paper investigated stamp forming performance of two aluminum-based Fiber-metal laminates (FMLs) with different fiber-reinforced composites using finite element analysis. Given the inherent thermal-dependent properties of fiber-reinforced polypropylene, the effect of elevated temperature on its forming behavior is worthy of concern. Furthermore, the elevation in temperature also influences the bonding within the constituent lamina. Both factors were integrated in the modelling. By investigating the through-thickness strain evolution throughout the stamping process, the forming mode of each layer, as well as their interactions, were better understood. Results suggested that the flow of matrix and the rotation at the intersections of fiber strands can be promoted at elevated temperature, which transforms the forming performance of FMLs close to that of monolithic aluminum. These results propose means to improve the forming performance of FMLs.

Measurement of Rotatory Optics Element in Tensor Dielectric Matrix for Rotatory Optical Fiber

The rotatory optics element in the tensor dielectric coefficient matrix is an important para-(meter) for analyzing and calculating a rotatory optical fiber by electromagnetic theory. But the mea-(surement) of rotatory optics element is difficult for the rotatory optical fiber. A simple principle and method for measuring rotatory optics element are put forward in this paper. Firstly by using electromagnetic theory it was demonstrated that the rotatory optics element has a simple linear relation with the rotatory angle, and then the rotatory optics element has a simple linear relation with the magnetic field strength (or bias current in the helix coil) . Secondly a measurement system for the rotatory optics element in the rotatory optical fiber was designed. Using the measurement system the rotatory element can be obtained by measuring the bias current simply.

Nonlinear Finite Element Analysis of Steel Fiber Reinforced Concrete Deep Beams

By the nonlinear finite element analysis （FEA） method, the mechanical properties of the steel fiber reinforced concrete （SFRC） deep beams were discussed in terms of the crack load and ultimate bearing capacity. In the simulation process, the ANSYS parametric design language （APDL） was used to set up the finite element model; the model of bond stress-slip relationship between steel bar and concrete was established. The nonlinear FEA results and test results demonstrated that the steel fiber can not only significantly improve the cracking load and ultimate bearing capacity of the concrete but also repress the development of the cracks. Meanwhile, good agreement was found between the experimental data and FEA results, if the unit type, the parameter model and the failure criterion are selected reasonably.

纤维增强粉煤灰基地聚合物注浆材料力学性能与模拟研究

针对粉煤灰基地聚合物注浆材料韧性差的问题,研究了两种不同纤维对注浆材料抗压强度和抗折强度的影响,并利用扫描电镜对纤维增强地聚合物注浆材料微观形貌进行分析。为进一步揭示注浆材料内部纤维的受力状态,使用ABAQUS软件建立纤维增强地聚合物注浆材料的有限元模型,对模型开展三点抗折试验模拟,探究基体的损伤破坏形态与基体内部纤维的受力情况。结果表明:与聚丙烯纤维相比,玄武岩纤维对注浆材料抗折与抗压强度提升效果更好,当玄武岩纤维的掺量为0.60%时,相较于未添加纤维的空白组,注浆材料的抗折强度与抗压强度分别提升了33.54%与19.40%;纤维可以有效减小基体的损伤面积,玄武岩纤维与聚丙烯纤维掺量分别为0.60%与0.90%时,基体内部的纤维能够充分发挥自身的抗拉强度。

湖羊与三元杂交绵羊夏杜湖、夏澳湖肉质特性比较研究

旨在探究湖羊与三元杂交绵羊夏杜湖、夏澳湖肉质特性。本研究选择健康且出生体重相近的公羔((3.61±0.65)kg)随母哺乳至45天后集中断奶。断奶后分成3个处理组(湖羊组、夏澳湖组和夏杜湖组),每个处理15只公羔,3个处理的45只羔羊混合饲养至6月龄屠宰,并分析背最长肌组织形态及背最长肌的肉品质及营养成分。试验期饲喂全混合基础日粮。结果表明:1)相对于湖羊,三元杂交绵羊背最长肌亮度(L*)显著降低,熟肉率显著提高(P<0.05),但其对背最长肌pH、剪切力、失水率、红度(a*)和黄度(b*)无显著影响(P>0.05)。2)相对于湖羊,三元杂交绵羊背最长肌纤维直径和平均面积显著提高,但肌纤维数量和密度显著降低(P<0.05)。3)相对于湖羊,三元杂交绵羊背最长肌中粗蛋白、必需和非必需氨基酸的含量显著提高(P<0.05),但对总饱和脂肪酸、不饱和脂肪酸及微量元素(铜、铁、锌和锰)无显著影响(P>0.05)。4)夏杜湖和夏澳湖在背最长肌pH、剪切力、失水率、熟肉率、肉色、肌纤维数量、肌纤维面积、肌纤维密度、常规营养成分(水分、粗蛋白、粗脂肪、粗灰分)、微量元素(铜、铁、锌和锰)、必需和非必需氨基酸的含量、总饱和脂肪酸和不饱和脂肪酸含量均无显著差异(P>0.05)。综上所述,三元杂交绵羊能够显著改善肉品质,增加背最长肌中粗蛋白和氨基酸水平,具有培育生产优质羊肉的潜力,且同一终端父本杂交后代在肉质特性中无明显差异。

高阶轨道角动量传输光纤设计及传输特性研究(内封底文章)

为解决一般轨道角动量传输光纤传输轨道角动量模式数量少、质量差的问题,提出了一种基于正六边形空气孔排列的新型光子晶体光纤结构。该光纤引入了空气填充率高的矩形空气孔以及采用高折射率材料填充环形传输区域,能够有效提高环形传输区域和包层间的折射率差,且正六边形排列空气孔有利于提高模间有效折射率差。经过结构优化得到最优光纤结构,有限元法的分析结果表明,最优结构下,该光纤在常用波段S+C+L+U波段上能够支持142种轨道角动量模式的传输,最高阶数达到36阶。且所提出光纤具有良好的传输特性,本征模式的最高限制性损耗为10−9 dB/m量级,与典型轨道角动量传输光子晶体光纤相比至少降低了一个数量级;最大有效模场面积能够达到206.18μm^(2),最小非线性系数低至0.397 W^(−1)∙km^(−1);色散平坦且最小色散变化低至1.4578 ps/(nm∙km);所有本征模式纯度均在93.4%~96.8%范围内。且该光纤具有较好的制备可行性,对制造精度要求不高。因此,该光纤在基于轨道角动量光纤的复用系统中具有广阔的应用前景,为提高通信容量提供了一种有效手段。

芳纶纤维增强复合材料转子的有限元分析

转子是机械转动部件中的一种,存在于电动机、水轮机、风力发电机、飞轮储能系统等各种机电设备中。在飞轮储能系统中,转子的材料、形状等关键因素都会对系统的性能产生影响。文中以提高飞轮储能系统转子的转速为出发点,建立了复合材料转子的数字化模型,并且对芳纶纤维复合材料转子开展了有限元分析,确定了复合材料层数变化、过盈量变化等对轮毂和轮缘的径向应力、周向应力及转速的影响。数值模拟结果为芳纶纤维增强树脂基复合材料在复合材料飞轮中的应用提供了参考。

纤维金属板蜂窝夹芯结构鸟体高速冲击损伤分析

纤维金属板蜂窝夹芯结构作为一种轻质航空结构,研究其抗鸟体高速冲击性能具有重要的现实意义。本文提出一种基于连续介质损伤力学的有限元模型,研究鸟体高速冲击下纤维金属板蜂窝夹芯结构的力学行为及损伤机理。采用光滑粒子流体动力学(Smooth particle hydrodynamics, SPH)法对鸟体类流体力学行为进行建模;采用Johnson-Cook模型模拟金属层冲击力学响应;采用三维Hashin准则,考虑应变率效应,模拟复合材料层板面内损伤演化;采用界面单元模拟层间分层现象。编写用户材料VUMAT子程序,实现基于ABAQUS/Explicit软件平台的数值求解。探讨鸟体速度、蜂窝高度和面板厚度对纤维金属板蜂窝夹芯结构鸟体冲击性能的影响,分析预应力条件下纤维金属板蜂窝夹芯结构鸟体高速冲击损伤特性,为夹芯结构鸟体冲击问题数值分析提供一定的参考。

先驱体转化法制备含异质元素碳化硅纤维的研究进展

连续SiC纤维及其复合材料以其优异的耐高温、抗氧化以及机械性能在航空航天以及核领域有着广泛的应用前景。先驱体转化法已成为制备连续SiC纤维最重要的方法。特定异质元素的引入可以有效改善SiC纤维的性能。本文结合我们团队近40年在先驱体转化法制备高性能SiC纤维领域的相关工作,首先综述了异质元素的引入方式,主要包括物理共混和化学改性;从提高先驱体的陶瓷产率、促进纤维烧结致密化,提高SiC纤维的耐高温性能以及拓展SiC纤维的功能化应用等方面阐述了异质元素的作用和机理;然后分别介绍了国内外含Ti、Al、Zr、Fe、B以及难熔金属(Hf、Ta、Nb)等含异质元素SiC纤维的组成、结构与性能以及发展现状,最后对陶瓷先驱体体系构建、异质元素种类含量与纤维性能构效关系研究、以及纤维工程化应用等研究方向进行了展望。

钢-玄武岩混杂纤维混凝土压力管道有限元分析

重点研究了掺入钢-玄武岩的混杂纤维混凝土对水电站压力管道外包混凝土承载特性、开裂后裂缝形态以及钢衬和钢筋应力的影响.对10组不同掺量的钢-玄武岩混杂纤维钢筋混凝土试件进行轴向拉伸试验,获得了钢-玄武岩混杂纤维混凝土的相关力学性能参数.以三峡水电站钢衬钢筋混凝土压力管道结构为例,利用有限元软件对钢-玄武岩混杂纤维的掺入对压力管道钢材应力、管道外包混凝土裂缝扩展与裂缝宽度的影响进行分析.结合三峡水电站压力管道结构的大比尺模型试验结果,对比分析了钢衬钢筋钢-玄武岩混杂纤维混凝土压力管道与常规钢衬钢筋混凝土压力管道两种方案下的钢衬及钢筋应力.结果表明,掺入钢-玄武岩混杂纤维后压力管道结构整体受力更加均匀,且管道外包混凝土的裂缝数量和裂缝宽度也有显著的降低,同时压力管道的钢衬及钢筋应力明显降低.

变刚度复合材料层合板研究进展

变刚度复合材料层合板由纤维曲线铺放而成,可以实现刚度分布的变化设计,与传统固定铺层角的复合材料层合板相比,变刚度复合材料层合板在减少重量和成本的同时,也提高了结构性能。随着铺放设备的发展,目前已经能够利用自动铺放技术实现纤维的曲线铺放。同时,为提高复合材料构件的结构性能和满足不同的工程实际需求,铺层设计方法也从单一角度的直线铺层逐渐向变角度曲线铺层发展。本文首先介绍了变刚度复合材料层合板设计制造方法与有限元建模,接着在刚度分布、屈曲特性、失效行为等方面阐述了变刚度复合材料层合板力学性能的研究进展,然后结合南京航空航天大学复合材料工程自动化技术研究中心在变刚度复合材料层合板振动特性方面的研究,对变刚度复合材料层合板振动特性进行了分析和概括,最后对变刚度复合材料层合板未来的研究趋势进行了论述与展望。

复合材料格栅结构筋条纤维形态与拉伸性能

复合材料格栅结构已大量应用于航空航天飞行器中,探究其力学性能具有重要的工程研究价值。为提高复合材料格栅结构的承载效率,提出一种基于“断筋”处理的纤维形态改善方法,通过有限元分析与试验验证的手段,研究了不同断筋比例对复合材料格栅结构节点处纤维形态和拉伸性能的影响。利用建立的有限元模型分析了断筋处理的复合材料格栅结构拉伸失效机理,仿真与试验结果误差均小于10%。结果表明:在成型过程中适当进行断筋处理,能够显著降低节点处纤维弯曲角度,提高拉伸性能。相较于不进行断筋处理,断筋比例为30%时,拉伸极限载荷提高了24.4%。