Assessing the deformation response of double-track overlapped tunnels using numerical simulation and field monitoring

The unprecedented rate of metro construction has led to a highly complex network of metro lines.Tunnels are being overlapped to an ever-increasing degree.This paper investigates the deformation response of double-track overlapped tunnels in Tianjin,China using finite element analysis(FEA)and field monitoring,considering the attributes of different tunneling forms.With respect to the upper tunneling,the results of the FEA and field monitoring showed that the maximum vertical displacements of the ground surface during the tail passage were 2.06 mm,2.25 mm and 2.39 mm obtained by the FEA,field monitoring and Peck calculation,respectively;the heaves on the vertical displacement curve were observed at 8 m(1.25D,where D is the diameter of the tunnel)away from the center of the tunnel and the curve at both sides was asymmetrical.Furthermore,the crown and bottom produce approximately0.38 mm and 1.26 mm of contraction,respectively.The results of the FEA of the upper and lower sections demonstrated that the tunneling form has an obvious influence on the deformation response of the double-track overlapped tunnel.Compared with the upper tunneling,the lower tunneling exerted significantly less influence on the deformation response,which manifested as a smaller displacement of the strata and deformation of the existing tunnel.The results of this study on overlapped tunnels can provide a reference for similar projects in the future.

Numerical analysis and field monitoring tests on shallow tunnels under weak surrounding rock

The Jianpudong No. 4 tunnel is a shallow tunnel, which belongs to Shaoshan County scenic highway in Hunan province, China and whose surrounding rock is weak. According to its characteristics, the field monitoring tests and numerical analysis were done. The mechanical characteristics of shallow tunnels under weak surrounding rock and the stress-strain rule of surrounding rock and support were analyzed. The numerical analysis results show that the settlement caused by upper bench excavating accounts for 44% of the total settlement, and the settlement caused by tunnel upper bench supporting accounts for 56% of the total settlement. The maximum axial force of shotcrete lining is 177.2 k N, which locates in hance under the secondary lining. The maximum moment of shotcrete lining is 5.08 k N·m, which locates in the arch foot. The stress curve of steel arch has three obvious stages during the tunnel construction. The maximum axial force of steel arch is 297.4 k N, which locates in tunnel vault. The axial forces of steel arch are respectively 23.5 k N and-21.8 k N, which is influenced by eccentric compression of shallow tunnel and locates in hance. The results show that there is larger earth pressure in tunnel vault which is most unfavorable position of steel arch. Therefore, the advance support should be strengthened in tunnel vault during construction process.

Analytical approach and field monitoring for mechanical behaviors of pipe roof reinforcement

Considering the delay effect of initial lining and revising the Winkler elastic foundation model,an analytical approach based on Pasternak elastic foundation beam theory for pipe roof reinforcement was put forward. With the example of a certain tunnel excavation,the comparison of the values of longitudinal strain of reinforcing pipe between field monitoring and analytical approach was made. The results indicate that Pasternak model,which considers a more realistic hypothesis in the elastic soil than Winkler model,gives more accurate calculation and agrees better with the result of field monitoring. The difference of calculation results between these two models is about 7%,and Pasternak model is proved to be a better way to study the reinforcement mechanism and improve design practice. The calculation results also reveal that the reinforcing pipes act as levers,which increases longitudinal load transfer to an unexcavated area,and consequently decreases deformation and increases face stability.

Field monitoring of railroad embankment vibration responses in seasonally frozen regions

To investigate the vibration characteristics of a railway subgrade in different seasons, three field experiments were carried out in the seasonally frozen Daqing area of China during spring, smnmer, and winter. The vibration characteristics and attenuation rates of the subgrade induced by passing trains were investigated, and the influences of the season, train speed, train type, train load, and number of train compartments are described in this paper. The results show that： （1） near the rail track the vibration in the vertical direction was more significant than in the lateral and longitudinal directions, and as the distance from the railway track increased, the acceleration amplitudes and the attenuation rates all decreased in all three directions; （2） the acceleration amplitudes and at- tenuation rates decreased in the three different study seasons as the distance from the railway track increased, and the attenuation rates in the freezing period were the largest; and （3） the acceleration amplitude induced by a freight train was greater than that by a passenger train, and the subgrade vibration increased with increasing passenger train speeds when the number of train compart- ments was similar. These results have great significance for enhanced understanding of the characteristics of wain-induced vibra- tion embankment response in seasonally frozen regions, and provide essential field monitoring data on train-induced vibrations in order to improve the performance criteria of railroading in seasonally frozen regions.

Field monitoring of differential frost heave in widened highway subgrade

In cold regions,the widened subgrade could produce uneven frost heave that is detrimental to the pavement.This study investigates the differential frost heave characteristics in a widened subgrade.The field monitoring system mainly consists of temperature,moisture,and displacement sensors and distributed optical fiber cables for strain measurement.The monitoring results show that the cooling period in the subgrade is longer than the warming period.Water content in the subgrade changes significantly within 0−2 m below the subgrade surface but stabilizes within 2−5 m.The maximum frost heave occurs from February to March.In comparison,the existing subgrade has a longer freezing period and larger heave value,caused by the higher density and water content inside.Water in the existing subgrade migrates into the new one after widening,leading to frost heave reduction in the existing subgrade.Simultaneously,the traffic loads result in the consolidation of the new subgrade,thus reducing the heave value in the second year.In the third year,the water supply from the existing subgrade facilitates the frost heave in the new subgrade.The tensile strain distributions obtained by the distributed optical fiber cables show that the maximum differential frost heave occurs at the joint between the existing and new subgrades.The differential frost heave gradually stabilizes after three years.Finally,an improved frost heave prediction model is developed based on the segregation potential concept and monitoring results.

Numerical Simulation and Field Monitoring Analysis for Deep Foundation Pit Construction of Subway Station

To investigate the effect of deep foundation pit excavation on the stability of retaining structure, a subway stationin the city of Jinan was selected as a project, and a FLAC3D-based three dimensional model was developed fornumerical simulation. The horizontal displacement of the retaining structure, the axial force of the support, andthe vertical displacement of the column were studied and compared to the collected data from the field. The findingsindicate that when the foundation pit is excavated, the maximum deformation of the retaining structure progressivelydecreases from the top, the distortion of the retaining structure gradually rises, and the final maximumdeformation is around 17 meters deep. In each layer of support, the largest axial force support is located in thefirst reinforced concrete support;the uplift of the pit bottom caused by soil unloading plays a primary role in thevertical displacement of the column, and the column exhibits an upward trend under all construction conditions.When compared to the measured data, the generated findings are comparable and the fluctuation trend is extremelyconsistent. The findings of this article may give technical direction for the development of subway stationswith a comparable engineering basis.

Atmospheric Corrosion Monitoring of Field-exposed Q235B and T91 Steels in Zhoushan Offshore Environment Using Electrochemical Probes

This work aimed to in-situ monitor the atmospheric corrosion of steels exposed to Zhoushan offshore environment by using electrochemical noise（EN） technique. A portable EN monitoring system was established and two electrochemical probes（named as Q235 B and T91） were designed. Experimental results indicated that the noise resistance of T91 steel was higher than that of Q235 B steel, revealing that the corrosion resistance of T91 was higher than that of Q235 B. A 60-day monitoring result indicated that the noise resistance was well correlated with the weight loss data. Wavelet analyses results of EN data indicated that Q235 B underwent uniform corrosion and T91 suffered from localized corrosion, which was further confirmed by the surface observation. It is concluded that EN can be used as a new method to identify the corrosion form and corrosion resistance in atmospheric conditions.

Discussion on establishing monitoring networks for temperature fields of shallow thermal energy in Shandong, China

In the recent decade, the construction projects related to shallow geothermal energy engineering have undergone rapid development in Shandong Province. The predominant type of these developments and applications was heat exchange through buried tubes and the main targets were residential and office buildings. However, an overwhelming majority of the completed geothermal heat pump projects lacked monitoring devices so that they were unable to comprehensively reflect the background values for the geothermal fields within the province and few researches were conducted on their influence on the geological environment. In this paper, locations for monitoring shallow geothermal energy and their validity of the monitoring point deployment were studied in view of the development and application status as well as geological background conditions of various projects located in multiple cities providing data support for analyzing the fluctuation trend and influence of large-scale shallow geothermal energy applications on the shallow geothermal and the feasibility and parameter designs of newly built systems in Shandong Province in the future.

Study on Safety and Stability Evaluation of Waste Disposal Field of a Hydropower Station Based on <i>In Situ</i>Monitoring

Reasonable site selection, blocking to meet design standards, interception and drainage and other protective measures are the basic conditions for not causing disaster in slag disposal site. A hydropower station is located in mountainous area, the amount of slag abandoned is large, the grade of slag disposal field is high, and the site selection is difficult. On the basis of in Situ deformation monitoring, the slope stability of slag disposal site is calculated by Swedish arc method through the analysis of the scale, grade, site selection, surrounding environment, cut and discharge, blocking and protection design standards of slag disposal site. Under normal and abnormal operating conditions, the slope stability of slag disposal site meets the requirements of the code, and the results of in Situ deformation monitoring verify the calculation results of slope stability of slag disposal site by Swedish circular arc method.

Development of Magnetic Field Sensor and Motor Fault Monitoring Application

For the purpose of motor fault real-time monitoring, this research developed a nano-silicon ni- tride film based magnetic field (MF) sensor, and applied this sensor in MF detection of two common faults. Through experiment, it turned out that arc discharge and slot discharge occur in motor fault produce MF with certain laws. This result proved the feasibility of the sensor and sensing method in MF analysis, and revealed possibility of a new method in fault detection.

Deformation mechanism and collapse treatment of the rock surrounding a shallow tunnel based on on-site monitoring

When tunnels are constructed at shallow depths in areas with poor geological conditions,such as portal sections,valleys and hillsides in regions with granitic bedrock,considerable excavation-induced deformation of the surrounding rock may occur,potentially resulting in tunnel collapses.The main reason for these problems is the lack of understanding of the deformation mechanism and evolution of the soft granitic rock surrounding the tunnel and the adoption of inappropriate construction technology and methods.This article analyzes the deformation mechanism of the rock surrounding a shallow tunnel based on in situ monitoring data as a case study and suggests that certain measures should be taken to effectively control the deformation of the surrounding rock and to minimize the potential for tunnel collapse.The results show that the deformation of the granitic soil surrounding the tunnel can be divided into three stages:the rapid deformation stage,the slow deformation stage and the stabilization stage.Appropriate construction methods should be carefully selected to ensure safety during tunnel excavation in the first stage.To avoid secondary disasters caused by tunnel collapses,three treatment measures may be implemented as part of safety management:enhancing the monitoring of the surrounding rock deformation,adjusting the construction methods and optimizing the support systems.In particular,accurate monitoring data and timely information feedback play a vital role in tunnel construction.Therefore,engineers with considerable engineering experience and professional knowledge are needed to analyze the monitoring data and make accurate predictions of tunnel deformation to ensure that reasonable measures are taken in the process of shallow tunnel excavation.

Field observations of debris-flow initiation processes on sediment deposits in a previous deep-seated landslide site

Although information regarding the initiation processes of debris flows is important for the development of mitigation measures,field data regarding these processes are scarce.We conducted field observations of debris-flow initiation processes in the upper Ichinosawa catchment of the Ohya landslide,central Japan.On 19 June 2012,our videocamera monitoring systems recorded the moment of debris-flow initiation on channel deposits(nine surges) and talus slopes(eight surges).The initiation mechanisms of these surges were classified into three types by analyzing the video images: erosion by the surface flow,movement of deposits as a mass,and upward development of the fluid area.The first type was associated with the progress of surface flow from the upper stream on unsaturated channel deposits.The second type was likely caused by an increase in the pore water pressure associated with the rising in the groundwater level in channel deposits;a continuous water supply from the upper stream by the surface flow might have induced this saturation.The third type was associated with changes in the downstream topography caused by erosion.The flow velocity of most surges was less than 3 m s^(-1) and they usually stopped within 100 m from the initiation point.Surges with abundant pore fluid had a higher flow velocity(about 3- 5 m s^(-1)) and could travel for alonger duration.Our observations indicate that the surface flow plays an important role in the initiation of debris flows on channel deposits and talus slopes.

Structural Stress Monitoring and FEM Analysis of the Cutting Operation of the Main Bracket of A Semi-Submersible Platform

For a semi-submersible platform in repair, the eight old main brackets which connect columns with pontoons need to be replaced by new ones. In order to ensure the safety of the cutting operation of the old main bracket and calculate the initial stress condition of new main bracket, the structural stress monitoring of eight key spots is carried out, and then the calibrated finite element model is established according to the field monitoring results. Before cutting the main bracket and all associated structures, eight rectangular rosettes were installed, and a tailored cutting scheme was proposed to release the initial stress, in which the main bracket and associated column and pontoon plates were partly cut. During the cutting procedure, the strains of the monitoring spots were measured, and then the structural stress of the monitored spots were obtained. The stress variation characteristics at different spots during the initial cutting operation were shown and the initial stress condition of the monitored spots was figured out. The loading and support conditions of the semi-submersible platform were calibrated based on the measured initial stress condition, which made the finite element model more credible. The stress condition with the main bracket and associated structures being entirely cut out is analyzed by the Finite Element Method (FEM), which demonstrates the cutting operation to be safe and feasible. In addition, the calibrated finite element model can be used to calculate the initial stress condition of the new main bracket, which will be very helpful for the long-term stress monitoring on the main bracket.

Structural health monitoring of bridges in the State of Connecticut

A joint effort between the Connecticut Department of Transportation and the University of Connecticut has been underway for more than 20 years to utilize various structural monitoring approaches to assess different bridges in Connecticut. This has been done to determine the performance of existing bridges, refine techniques needed to evaluate different bridge components, and develop approaches that can be used to provide a continuous status of a bridge＇s structural integrity. This paper briefly introduces the background of these studies, with emphasis on recent research and the development of structural health monitoring concepts. This paper presents the results from three different bridge types： a post-tensioned curved concrete box girder bridge, a curved steel box-girder bridge, and a steel multi-girder bridge. The structural health monitoring approaches to be discussed have been successfully tested using field data collected during multi-year monitoring periods, and are based on vibrations, rotations and strains. The goal has been to develop cost-effective strategies to provide critical information needed to manage the State of Connecticut＇s bridge infrastructure.

大凉山背斜核部区隧道初支大变形机理与控制

针对大凉山2号公路隧道穿越高地应力背斜核心区域,隧道易发生初支大变形、坍塌、钢架扭曲等问题,通过现场监控量测、围岩岩性实验、理论分析、数值模拟分析和围岩接触压力监测等综合分析,研究了大凉山2号隧道背斜核部大变形成因机理。研究表明:背斜核部玄武岩单轴抗压强度为23.31 MPa,凝灰质泥岩遇水具有一定膨胀性,给围岩变形创造了条件。由于岩层岩性不同,开挖后洞周玄武岩呈独立受弯剪梁状态。相对无水条件下,受地下水补给影响,围岩塑性区面积增加,拱腰部位较为明显。加固前,拱顶沉降量最大达470 mm,拱腰最大收敛值为844 mm,围岩接触压力为523.47 kPa。采用双层小导管+中台阶临时支撑+边墙临时支撑的“主动适应+强支撑”的综合处置方式,隧道拱顶变形减少87.6%,水平收敛变形减少95%,围岩接触压力最大值降至128 kPa,隧道变形得到有效控制。

Empowering fall webworm surveillance with mobile phone-based community monitoring: a case study in northern China

Recent advances in information and communication technologies, such as mobile Internet and smart- phones, have created new paradigms for participatory environment monitoring. The ubiquitous mobile phones with capabilities such as a global positioning system, camera, and network access, offer opportunities to estab- lish distributed monitoring networks that can perform a wide range of measurements for a landscape. This study examined the potential of mobile phone-based community monitoring of fall webworm （Hyphantria cunea Drury）. We built a prototype of a participatory fall webworm monitoring System based on mobile devices that stream- lined data collection, transmission, and visualization. We also assessed the accuracy and reliability of the data collected by the local community. The system performance was evaluated at the Ziya commune of Tianjin municipality in northern China, where fall webworm infestation has occurred. The local community provided data with accuracy comparable to expert measurements （Willmott＇s index of agreement 〉0.85）. Measurements by the local community effectively complemented remote sensing images in both temporal and spatial resolution.

天津空客A330宽体机厂房焊接加固过程结构性能监测与分析

大跨度钢桁架加固方法多采用焊接加固增大截面法.针对大跨度钢桁架屋盖整体结构的负载焊接加固,以天津空客A321(A330宽体机厂房)屋盖为例,采用4片角钢,分肢与原H型钢的翼缘、腹板分别焊接的加固方式,设计了合理的焊接加固方案与监测方案,对结构关键构件在焊接加固过程中的应力、应变进行监测.以监测数据为依据,研究分析焊接加固过程中型钢与加固角钢的应力响应规律,验证钢桁架梁采用角钢焊接加固的传力有效性,判断焊接热输入的影响范围.结果表明:在负载焊接加固的过程中,局部高温热影响区引起应力重分布,加固角钢的存在对原有型钢构件起到了相应的承担作用,焊接加固过程中结构的安全性可以得到保证.此外,焊接加固时,通过监测相邻杆件的应力和应变,分析表明焊接热影响的范围在两个节间范围内,且带来的应力响应较小.

特高海拔寒区隧道温度场演化规律——以黑恰隧道工程为例

为研究特高海拔寒区隧道温度场的时空分布特征及其变化规律,以青藏高原西北部喀喇昆仑高山区的黑恰隧道为依托工程,首先,在现场建立包括气象要素在内的寒区隧道远程自动监测系统,对特高海拔寒区隧道温度场演化规律进行分析研究;其次,提出考虑湍流对流传热和热传导作用下的隧道三维数值模型,利用现场监测数据验证该模型的准确性;最后,讨论铺设保温层前后隧道温度场的变化特性。研究结果表明:1)在距进口0~270 m隧道受到冻融作用影响,洞内气温与衬砌温度呈线性正相关关系;2)隧道洞内气温对隧道径向温度场的影响主要体现在衬砌和浅层围岩;3)在最冷月平均气温方面,不同类型寒区隧道温度大小关系为特高海拔<高纬度<高海拔,在最大冻结深度方面,不同类型寒区隧道最大冻结深度大小关系为特高海拔>高纬度>高海拔;4)铺设保温隔热层后,保温层对衬砌与围岩起到良好的保温作用。

预留核心土法隧道爆破围岩损伤与振动特性研究

目的 研究预留核心土法爆破开挖影响下的山岭隧道围岩损伤与振动特性,为爆破参数优化以及隧道加固设计提供理论参考。方法 依托新疆阿克特蒲2号左洞隧道工程,借助ANSYS/LSDYNA软件建立隧道爆破开挖数值模型,基于现场实际开挖轮廓和振速监测数据验证数值模型的合理性,进而分析围岩累积损伤特性、振速分布和振速衰减规律。结果 爆破结束后,隧道轮廓平整,预留核心土上部损伤严重;隧道拱顶y方向、拱肩z方向及拱脚x方向的振速最大;距离掌子面越近,采用萨道夫斯基经验公式预测的振速结果误差越大。结论 为保证结构稳定性,在下次爆破施工前可以通过减少掏槽孔、辅助孔的装药量或者调整其孔网参数来减小爆炸荷载,沿最大振速方向进行重点加固;采用萨道夫斯基经验公式预测距离掌子面10 m内的振速时,避免仅用z方向距离近似为爆心距大小,应同时考虑三个方向的距离。

Control effect and optimization scheme of combined rockboltecable support for a tunnel in horizontally layered limestone:A case study

This study focused on the mechanical behavior of a deep-buried tunnel constructed in horizontally layered limestone,and investigated the effect of a new combined rockboltecable support system on the tunnel response.The Yujingshan Tunnel,excavated through a giant karst cave,was used as a case study.Firstly,a multi-objective optimization model for the rockboltecable support was proposed by using fuzzy mathematics and multi-objective comprehensive decision-making principles.Subsequently,the parameters of the surrounding rock were calibrated by comparing the simulation results obtained by the discrete element method(DEM)with the field monitoring data to obtain an optimized support scheme based on the optimization model.Finally,the optimization scheme was applied to the karst cave section,which was divided into the B-and C-shaped sections.The distribution range of the rockboltecable support in the C-shaped section was larger than that in the B-shaped section.The field monitoring results,including tunnel crown settlement,horizontal convergence,and axial force of the rockboltecable system,were analyzed to assess the effectiveness of the optimization scheme.The maximum crown settlement and horizontal convergence were measured to be 25.9 mm and 35 mm,accounting for 0.1%and 0.2%of the tunnel height and span,respectively.Although the C-shaped section had poorer rock properties than the B-shaped section,the crown settlement and horizontal convergence in the C-shaped section ranged from 46%to 97%of those observed in the B-shaped section.The cable axial force in the Bshaped section was approximately 60%of that in the C-shaped section.The axial force in the crown rockbolt was much smaller than that in the sidewall rockbolt.Field monitoring results demonstrated that the optimized scheme effectively controlled the deformation of the layered surrounding rock,ensuring that it remained within a safe range.These results provide valuable references for the design of support systems in deep-buried tunnels situated in layered rock masses.