This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)tr...This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.展开更多
The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arr...The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.展开更多
As a core component in intelligent edge computing,deep neural networks(DNNs)will increasingly play a critically important role in addressing the intelligence-related issues in the industry domain,like smart factories ...As a core component in intelligent edge computing,deep neural networks(DNNs)will increasingly play a critically important role in addressing the intelligence-related issues in the industry domain,like smart factories and autonomous driving.Due to the requirement for a large amount of storage space and computing resources,DNNs are unfavorable for resource-constrained edge computing devices,especially for mobile terminals with scarce energy supply.Binarization of DNN has become a promising technology to achieve a high performance with low resource consumption in edge computing.Field-programmable gate array(FPGA)-based acceleration can further improve the computation efficiency to several times higher compared with the central processing unit(CPU)and graphics processing unit(GPU).This paper gives a brief overview of binary neural networks(BNNs)and the corresponding hardware accelerator designs on edge computing environments,and analyzes some significant studies in detail.The performances of some methods are evaluated through the experiment results,and the latest binarization technologies and hardware acceleration methods are tracked.We first give the background of designing BNNs and present the typical types of BNNs.The FPGA implementation technologies of BNNs are then reviewed.Detailed comparison with experimental evaluation on typical BNNs and their FPGA implementation is further conducted.Finally,certain interesting directions are also illustrated as future work.展开更多
With the development of silicon photomultiplier(SiPM)technology,front-end electronics for SiPM signal processing have been highly sought after in various fields.A compact 64-channel front-end electronics(FEE)system ac...With the development of silicon photomultiplier(SiPM)technology,front-end electronics for SiPM signal processing have been highly sought after in various fields.A compact 64-channel front-end electronics(FEE)system achieved by fieldprogrammable gate array-based charge-to-digital converter(FPGA-QDC)technology was built and developed.The FEE consists of an analog board and FPGA board.The analog board incorporates commercial amplifiers,resistors,and capacitors.The FPGA board is composed of a low-cost FPGA.The electronics performance of the FEE was evaluated in terms of noise,linearity,and uniformity.A positron emission tomography(PET)detector with three different readout configurations was designed to validate the readout capability of the FEE for SiPM-based detectors.The PET detector was made of a 15×15 lutetium–yttrium oxyorthosilicate(LYSO)crystal array directly coupled with a SiPM array detector.The experimental results show that FEE can process dual-polarity charge signals from the SiPM detectors.In addition,it shows a good energy resolution for 511-keV gamma photons under the dual-end readout for the LYSO crystal array irradiated by a Na-22 source.Overall,the FEE based on FPGA-QDC shows promise for application in SiPM-based radiation detectors.展开更多
Piezoelectric resonators are widely used in frequency reference devices, mass sensors, resonant sensors(such as gyros and accelerometers), etc. Piezoelectric resonators usually work in a special resonant mode. Obtaini...Piezoelectric resonators are widely used in frequency reference devices, mass sensors, resonant sensors(such as gyros and accelerometers), etc. Piezoelectric resonators usually work in a special resonant mode. Obtaining working resonant mode with high quality is key to improve the performance of piezoelectric resonators. In this paper, the resonance characteristics of a rectangular lead zirconium titanate(PZT) piezoelectric resonator are studied. On the basis of the field-programmable gate array(FPGA) embedded system, direct digital synthesizer(DDS) and automatic gain controller(AGC) are used to generate the driving signals with precisely adjustable frequency and amplitude. The driving signals are used to excite the piezoelectric resonator to the working vibration mode. The influence of the connection of driving electrodes and voltage amplitude on the vibration of the resonator is studied. The quality factor and vibration linearity of the resonator are studied with various driving methods mentioned in this paper. The resonator reaches resonant mode at 330 kHz by different driving methods.The relationship between resonant amplitude and driving signal amplitude is linear. The quality factor reaches over 150 by different driving methods. The results provide a theoretical reference for the efficient excitation of the piezoelectric resonator.展开更多
Neuromorphic computing is considered to be the future of machine learning,and it provides a new way of cognitive computing.Inspired by the excellent performance of spiking neural networks(SNNs)on the fields of low-pow...Neuromorphic computing is considered to be the future of machine learning,and it provides a new way of cognitive computing.Inspired by the excellent performance of spiking neural networks(SNNs)on the fields of low-power consumption and parallel computing,many groups tried to simulate the SNN with the hardware platform.However,the efficiency of training SNNs with neuromorphic algorithms is not ideal enough.Facing this,Michael et al.proposed a method which can solve the problem with the help of DNN(deep neural network).With this method,we can easily convert a well-trained DNN into an SCNN(spiking convolutional neural network).So far,there is a little of work focusing on the hardware accelerating of SCNN.The motivation of this paper is to design an SNN processor to accelerate SNN inference for SNNs obtained by this DNN-to-SNN method.We propose SIES(Spiking Neural Network Inference Engine for SCNN Accelerating).It uses a systolic array to accomplish the task of membrane potential increments computation.It integrates an optional hardware module of max-pooling to reduce additional data moving between the host and the SIES.We also design a hardware data setup mechanism for the convolutional layer on the SIES with which we can minimize the time of input spikes preparing.We implement the SIES on FPGA XCVU440.The number of neurons it supports is up to 4000 while the synapses are 256000.The SIES can run with the working frequency of 200 MHz,and its peak performance is 1.5625 TOPS.展开更多
Emerging applications widely use field-programmable gate array(FPGA)prototypes as a tool to verify modern very-large-scale integration(VLSI)circuits,imposing many problems,including routing failure caused by the limit...Emerging applications widely use field-programmable gate array(FPGA)prototypes as a tool to verify modern very-large-scale integration(VLSI)circuits,imposing many problems,including routing failure caused by the limited number of connections among blocks of FPGAs therein.Such a shortage of connections can be alleviated through time-division multiplexing(TDM),by which multiple signals sharing an identical routing channel can be transmitted.In this context,the routing quality dominantly decides the performance of such systems,proposing the requirement of minimizing the signal delay between FPGA pairs.This paper proposes algorithms for the routing problem in a multi-FPGA system with TDM support,aiming to minimize the maximum TDM ratio.The algorithm consists of two major stages:(1)A method is proposed to set the weight of an edge according to how many times it is shared by the routing requirements and consequently to compute a set of approximate minimum Steiner trees.(2)A ratio assignment method based on the edge-demand framework is devised for assigning ratios to the edges respecting the TDM ratio constraints.Experiments were conducted against the public benchmarks to evaluate our proposed approach as compared with all published works,and the results manifest that our method achieves a better TDM ratio in comparison.展开更多
This paper presents a novel field-programmable analog array (FPAA) architecture featuring a dual mode including discrete-time (DT) and continuous-time (CT) operation modes, along with a highly routable connectio...This paper presents a novel field-programmable analog array (FPAA) architecture featuring a dual mode including discrete-time (DT) and continuous-time (CT) operation modes, along with a highly routable connection boxes (CBs) based interconnection lattice. The dual mode circuit for the FPAA is capable of achieving targeted op- timal performance in different applications. The architecture utilizes routing switches in a CB not only for the signal interconnection purpose but also for control of the electrical charge transfer required in switched-capacitor circuits. This way, the performance of the circuit in either mode shall not be hampered with adding of programmability. The proposed FPAA is designed and implemented in a 0.18 μm standard CMOS process with a 3.3 V supply voltage. The result from post-layout simulation shows that a maximum bandwidth of 265 MHz through the interconnection network is achieved. The measured results from demonstrated examples show that the maximum signal bandwidth of up to 2 MHz in CT mode is obtained with the spurious free dynamic range of 54 dB, while the signal processing precision in DT mode reaches 96.4%.展开更多
As a coprocessor, field-programmable gate array (FPGA) is the hardware computing processor accelerating the computing capacity of coraputers. To efficiently manage the hardware free resources for the placing of task...As a coprocessor, field-programmable gate array (FPGA) is the hardware computing processor accelerating the computing capacity of coraputers. To efficiently manage the hardware free resources for the placing of tasks on FPGA and take full advantage of the partially reconfigurable units, good utilization of chip resources is an important and necessary work. In this paper, a new method is proposed to find the complete set of maximal free resource rectangles based on the cross point of edge lines of running tasks on FPGA area, and the prove process is provided to make sure the correctness of this method.展开更多
Satellite signal simulator for global navigation satellite system(GNSS)can evaluate the accuracy of capturing,tracing and positioning of GNSS receiver.It has significant use-value in the military and civil fields.The ...Satellite signal simulator for global navigation satellite system(GNSS)can evaluate the accuracy of capturing,tracing and positioning of GNSS receiver.It has significant use-value in the military and civil fields.The system adopts the overall design scheme of digital signal processor(DSP)and field-programmable gate array(FPGA).It consists of four modules:industrial control computer simulation software,mid-frequency signal generator,digital-to-analog(D/A)module and radio frequency(RF)module.In this paper,we test the dynamic performance of simulator using the dynamic scenes testing method,and the signal generated by the designed simulator is primarily validated.展开更多
This paper proposes the fractal patterns classifier for multiple cardiac arrhythmias on field-programmable gate array (FPGA) device. Fractal dimension transformation (FDT) is employed to adjoin the fractal features of...This paper proposes the fractal patterns classifier for multiple cardiac arrhythmias on field-programmable gate array (FPGA) device. Fractal dimension transformation (FDT) is employed to adjoin the fractal features of QRS-complex, including the supraventricular ectopic beat, bundle branch ectopic beat, and ventricular ectopic beat. FDT with fractal dimension (FD) is addressed for constructing various symptomatic patterns, which can produce family functions and enhance features, making clear differences between normal and unhealthy subjects. The probabilistic neural network (PNN) is proposed for recognizing multiple cardiac arrhythmias. Numerical experiments verify the efficiency and higher accuracy with the software simulation in order to formulate the mathematical model logical circuits. FDT results in data self-similarity for the same arrhythmia category, the number of dataset requirement and PNN architecture can be reduced. Its simplified model can be easily embedded in the FPGA chip. The prototype classifier is tested using the MIT-BIH arrhythmia database, and the tests reveal its practicality for monitoring ECG signals.展开更多
Multiuser detection can be described as a quadratic optimization problem with binary constraint. Many techniques are available to find approximate solution to this problem. These tech- niques can be characterized in t...Multiuser detection can be described as a quadratic optimization problem with binary constraint. Many techniques are available to find approximate solution to this problem. These tech- niques can be characterized in terms of complexity and detection performance. The "efficient frontier" of known techniques include the decision-feedback, branch-and-bound and probabilistic data association detectors. The presented iterative multiuser detection technique is based on joint deregularized and box-constrained so- lution to quadratic optimization with iterations similar to that used in the nonstationary Tikhonov iterated algorithm. The deregulari- zation maximizes the energy of the solution, this is opposite to the Tikhonov regularization where the energy is minimized. However, combined with box-constraints, the deregularization forces the solution to be close to the binary set. We further exploit the box- constrained dichotomous coordinate descent (DCD) algorithm and adapt it to the nonstationary iterative Tikhonov regularization to present an efficient detector. As a result, the worst-case and aver- age complexity are reduced down to K28 and K2~ floating point operation per second, respectively. The development improves the "efficient frontier" in multiuser detection, which is illustrated by simulation results. Finally, a field programmable gate array (FPGA) design of the detector is presented. The detection performance obtained from the fixed-point FPGA implementation shows a good match to the floating-point implementation.展开更多
In this paper, a multi-functional development platform for flat panel display (FPD) development is proposed. With the proposed development platforms, a variety of FPD devices, including organic light-emitting diode ...In this paper, a multi-functional development platform for flat panel display (FPD) development is proposed. With the proposed development platforms, a variety of FPD devices, including organic light-emitting diode (OLED) screens, liquid crystal display (LCD) screens with touchscreens, OLED microdisplay screens, etc., can be directly and instantly connected, examined and utilized. A field-programmable gate array (FPGA) is used in the development system to drive different types of FPD devices, and ARM11S3C6410 is used as the application processor to provide various services. The development system uses Linux as the system kernel, Qt for Embedded Linux as the UI framework, various system libraries for video and audio services, and a custom-made user engine for fine-polished appearance and behavior. The development platform has been used not only in testing and verification of the FPD devices, but also in building OLED-powered handheld digital devices, shortening the development cycle from OLED devices to mature application products.展开更多
Aiming at high requirements of temperature measurement system in high temperature,high pressure,highly corrosive and other special environments,a temperature acquisition system based on field-programmable gate array(F...Aiming at high requirements of temperature measurement system in high temperature,high pressure,highly corrosive and other special environments,a temperature acquisition system based on field-programmable gate array(FPGA) which is the controller of the system is designed.Also a Flash memory is used as the memory and an erosion thermocouple is used as sensor of the system.Compared with the traditional system using complex programmable logic device(CPLD)and microcontroller unit(MCU)as the main body,this system has some advantages,such as short response time,small volume,no loss of data once power is off,high precision,stability and reliability.And the sensor of the system can be reused.In this paper,boiling water experiment is used to verify accuracy of the system.The millisecond level signal from firecrackers is for verifying the stability and fast response characteristics of the system.The results of experiment indicate that the temperature measurement system is more suitable for the field of explosion and other environments which have high requirements for the system.展开更多
High performance hardware architecture for depth measurement by using binocular-camera is proposed.In the system,at first,video streams of the target are captured by left and right charge-coupled device(CCD)cameras to...High performance hardware architecture for depth measurement by using binocular-camera is proposed.In the system,at first,video streams of the target are captured by left and right charge-coupled device(CCD)cameras to obtain an image including the target.Then,two different images with two different view points are obtained,and they are used in calculating the position deviation of the image's pixels based on triangular measurement.Finally,the three-dimensional coordinate of the object is reconstructed.All the video data is processed by using field-programmable gate array(FPGA)in real-time.Hardware implementation speeds up the performance and reduces the power,thus,this hardware architecture can be applied in the portable environment.展开更多
基金This work was supported in part by the Geran Galakan Penyelidik Muda Grant(GGPM),Universiti Kebangsaan Malaysia,Selangor,Malaysia under grant GGPM-2021-055.
文摘This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.
基金Supported by the CAS/SAFEA International Partnership Program for Creative Research Teams,National High Technology Research and Develop Program of China(2012AA012301)National Science and Technology Major Project of China(2013ZX03006004)
文摘The drive towards shorter design cycles for analog integrated circuits has given impetus to the development of Field Programmable Analog Arrays(FPAAs),which are the analogue counterparts of Field Programmable Gate Arrays(FPGAs).In this paper,we present a new design methodology which using FPAA as a powerful analog front-end processing platform in the smart sensory microsystem.The proposed FPAA contains 16 homogeneous mixed-grained Configurable Analog Blocks(CABs) which house a variety of processing elements especially the proposed fine-grained Core Configurable Amplifiers(CCAs).The high flexible CABs allow the FPAA operating in both continuous-time and discrete-time approaches suitable to support variety of sensors.To reduce the nonideal parasitic effects and save area,the fat-tree interconnection network is adopted in this FPAA.The functionality of this FPAA is demonstrated through embedding of voltage and capacitive sensor signal readout circuits and a configurable band pass filter.The minimal detectable voltage and capacitor achieves 38 uV and 8.3 aF respectively within 100 Hz sensor bandwidth.The power consumption comparison of CCA in three applications shows that the FPAA has high power efficiency.And the simulation results also show that the FPAA has good tolerance with wide PVT variations.
基金supported by the Natural Science Foundation of Sichuan Province of China under Grant No.2022NSFSC0500the National Natural Science Foundation of China under Grant No.62072076.
文摘As a core component in intelligent edge computing,deep neural networks(DNNs)will increasingly play a critically important role in addressing the intelligence-related issues in the industry domain,like smart factories and autonomous driving.Due to the requirement for a large amount of storage space and computing resources,DNNs are unfavorable for resource-constrained edge computing devices,especially for mobile terminals with scarce energy supply.Binarization of DNN has become a promising technology to achieve a high performance with low resource consumption in edge computing.Field-programmable gate array(FPGA)-based acceleration can further improve the computation efficiency to several times higher compared with the central processing unit(CPU)and graphics processing unit(GPU).This paper gives a brief overview of binary neural networks(BNNs)and the corresponding hardware accelerator designs on edge computing environments,and analyzes some significant studies in detail.The performances of some methods are evaluated through the experiment results,and the latest binarization technologies and hardware acceleration methods are tracked.We first give the background of designing BNNs and present the typical types of BNNs.The FPGA implementation technologies of BNNs are then reviewed.Detailed comparison with experimental evaluation on typical BNNs and their FPGA implementation is further conducted.Finally,certain interesting directions are also illustrated as future work.
基金supported by the Natural Science Foundation of Shandong Province (No. ZR2022QA039)the Program of Qilu Young Scholars of Shandong University
文摘With the development of silicon photomultiplier(SiPM)technology,front-end electronics for SiPM signal processing have been highly sought after in various fields.A compact 64-channel front-end electronics(FEE)system achieved by fieldprogrammable gate array-based charge-to-digital converter(FPGA-QDC)technology was built and developed.The FEE consists of an analog board and FPGA board.The analog board incorporates commercial amplifiers,resistors,and capacitors.The FPGA board is composed of a low-cost FPGA.The electronics performance of the FEE was evaluated in terms of noise,linearity,and uniformity.A positron emission tomography(PET)detector with three different readout configurations was designed to validate the readout capability of the FEE for SiPM-based detectors.The PET detector was made of a 15×15 lutetium–yttrium oxyorthosilicate(LYSO)crystal array directly coupled with a SiPM array detector.The experimental results show that FEE can process dual-polarity charge signals from the SiPM detectors.In addition,it shows a good energy resolution for 511-keV gamma photons under the dual-end readout for the LYSO crystal array irradiated by a Na-22 source.Overall,the FEE based on FPGA-QDC shows promise for application in SiPM-based radiation detectors.
文摘Piezoelectric resonators are widely used in frequency reference devices, mass sensors, resonant sensors(such as gyros and accelerometers), etc. Piezoelectric resonators usually work in a special resonant mode. Obtaining working resonant mode with high quality is key to improve the performance of piezoelectric resonators. In this paper, the resonance characteristics of a rectangular lead zirconium titanate(PZT) piezoelectric resonator are studied. On the basis of the field-programmable gate array(FPGA) embedded system, direct digital synthesizer(DDS) and automatic gain controller(AGC) are used to generate the driving signals with precisely adjustable frequency and amplitude. The driving signals are used to excite the piezoelectric resonator to the working vibration mode. The influence of the connection of driving electrodes and voltage amplitude on the vibration of the resonator is studied. The quality factor and vibration linearity of the resonator are studied with various driving methods mentioned in this paper. The resonator reaches resonant mode at 330 kHz by different driving methods.The relationship between resonant amplitude and driving signal amplitude is linear. The quality factor reaches over 150 by different driving methods. The results provide a theoretical reference for the efficient excitation of the piezoelectric resonator.
基金The work was supported by the HeGaoJi Program of China under Grant Nos.2017ZX01028103-002 and 2017ZX01038104-002the National Natural Science Foundation of China under Grant No.61472432.
文摘Neuromorphic computing is considered to be the future of machine learning,and it provides a new way of cognitive computing.Inspired by the excellent performance of spiking neural networks(SNNs)on the fields of low-power consumption and parallel computing,many groups tried to simulate the SNN with the hardware platform.However,the efficiency of training SNNs with neuromorphic algorithms is not ideal enough.Facing this,Michael et al.proposed a method which can solve the problem with the help of DNN(deep neural network).With this method,we can easily convert a well-trained DNN into an SCNN(spiking convolutional neural network).So far,there is a little of work focusing on the hardware accelerating of SCNN.The motivation of this paper is to design an SNN processor to accelerate SNN inference for SNNs obtained by this DNN-to-SNN method.We propose SIES(Spiking Neural Network Inference Engine for SCNN Accelerating).It uses a systolic array to accomplish the task of membrane potential increments computation.It integrates an optional hardware module of max-pooling to reduce additional data moving between the host and the SIES.We also design a hardware data setup mechanism for the convolutional layer on the SIES with which we can minimize the time of input spikes preparing.We implement the SIES on FPGA XCVU440.The number of neurons it supports is up to 4000 while the synapses are 256000.The SIES can run with the working frequency of 200 MHz,and its peak performance is 1.5625 TOPS.
基金supported by the Natural Science Foundation of Fujian Province(No.2020J01845)the National Natural Science Foundation of China(Nos.61772005 and 11871280)+1 种基金the Outstanding Youth Innovation Team Project for Universities of Shandong Province(No.2020KJN008)Qinglan Project.
文摘Emerging applications widely use field-programmable gate array(FPGA)prototypes as a tool to verify modern very-large-scale integration(VLSI)circuits,imposing many problems,including routing failure caused by the limited number of connections among blocks of FPGAs therein.Such a shortage of connections can be alleviated through time-division multiplexing(TDM),by which multiple signals sharing an identical routing channel can be transmitted.In this context,the routing quality dominantly decides the performance of such systems,proposing the requirement of minimizing the signal delay between FPGA pairs.This paper proposes algorithms for the routing problem in a multi-FPGA system with TDM support,aiming to minimize the maximum TDM ratio.The algorithm consists of two major stages:(1)A method is proposed to set the weight of an edge according to how many times it is shared by the routing requirements and consequently to compute a set of approximate minimum Steiner trees.(2)A ratio assignment method based on the edge-demand framework is devised for assigning ratios to the edges respecting the TDM ratio constraints.Experiments were conducted against the public benchmarks to evaluate our proposed approach as compared with all published works,and the results manifest that our method achieves a better TDM ratio in comparison.
基金Project supported by the CAS/SAFEA International Partnership Program for Creative Research Teams and the National High Technology Research and Development Program of China(No.2012AA012301)
文摘This paper presents a novel field-programmable analog array (FPAA) architecture featuring a dual mode including discrete-time (DT) and continuous-time (CT) operation modes, along with a highly routable connection boxes (CBs) based interconnection lattice. The dual mode circuit for the FPAA is capable of achieving targeted op- timal performance in different applications. The architecture utilizes routing switches in a CB not only for the signal interconnection purpose but also for control of the electrical charge transfer required in switched-capacitor circuits. This way, the performance of the circuit in either mode shall not be hampered with adding of programmability. The proposed FPAA is designed and implemented in a 0.18 μm standard CMOS process with a 3.3 V supply voltage. The result from post-layout simulation shows that a maximum bandwidth of 265 MHz through the interconnection network is achieved. The measured results from demonstrated examples show that the maximum signal bandwidth of up to 2 MHz in CT mode is obtained with the spurious free dynamic range of 54 dB, while the signal processing precision in DT mode reaches 96.4%.
基金Project supported by the Shanghai Leading Academic Discipline Project(Grant No.J50103)the Natural Science Foundation of Jiangxi Province(Grant No.2010GZS0031)the Science Technology Project of Jiangxi Province(Grant No.2010BGB00604)
文摘As a coprocessor, field-programmable gate array (FPGA) is the hardware computing processor accelerating the computing capacity of coraputers. To efficiently manage the hardware free resources for the placing of tasks on FPGA and take full advantage of the partially reconfigurable units, good utilization of chip resources is an important and necessary work. In this paper, a new method is proposed to find the complete set of maximal free resource rectangles based on the cross point of edge lines of running tasks on FPGA area, and the prove process is provided to make sure the correctness of this method.
基金Shanxi Provincial Science and Technology Research Fund(No.2012021013-6)
文摘Satellite signal simulator for global navigation satellite system(GNSS)can evaluate the accuracy of capturing,tracing and positioning of GNSS receiver.It has significant use-value in the military and civil fields.The system adopts the overall design scheme of digital signal processor(DSP)and field-programmable gate array(FPGA).It consists of four modules:industrial control computer simulation software,mid-frequency signal generator,digital-to-analog(D/A)module and radio frequency(RF)module.In this paper,we test the dynamic performance of simulator using the dynamic scenes testing method,and the signal generated by the designed simulator is primarily validated.
文摘This paper proposes the fractal patterns classifier for multiple cardiac arrhythmias on field-programmable gate array (FPGA) device. Fractal dimension transformation (FDT) is employed to adjoin the fractal features of QRS-complex, including the supraventricular ectopic beat, bundle branch ectopic beat, and ventricular ectopic beat. FDT with fractal dimension (FD) is addressed for constructing various symptomatic patterns, which can produce family functions and enhance features, making clear differences between normal and unhealthy subjects. The probabilistic neural network (PNN) is proposed for recognizing multiple cardiac arrhythmias. Numerical experiments verify the efficiency and higher accuracy with the software simulation in order to formulate the mathematical model logical circuits. FDT results in data self-similarity for the same arrhythmia category, the number of dataset requirement and PNN architecture can be reduced. Its simplified model can be easily embedded in the FPGA chip. The prototype classifier is tested using the MIT-BIH arrhythmia database, and the tests reveal its practicality for monitoring ECG signals.
基金supported by the National Council for Technological and Scientific Development of Brazil (RN82/2008)
文摘Multiuser detection can be described as a quadratic optimization problem with binary constraint. Many techniques are available to find approximate solution to this problem. These tech- niques can be characterized in terms of complexity and detection performance. The "efficient frontier" of known techniques include the decision-feedback, branch-and-bound and probabilistic data association detectors. The presented iterative multiuser detection technique is based on joint deregularized and box-constrained so- lution to quadratic optimization with iterations similar to that used in the nonstationary Tikhonov iterated algorithm. The deregulari- zation maximizes the energy of the solution, this is opposite to the Tikhonov regularization where the energy is minimized. However, combined with box-constraints, the deregularization forces the solution to be close to the binary set. We further exploit the box- constrained dichotomous coordinate descent (DCD) algorithm and adapt it to the nonstationary iterative Tikhonov regularization to present an efficient detector. As a result, the worst-case and aver- age complexity are reduced down to K28 and K2~ floating point operation per second, respectively. The development improves the "efficient frontier" in multiuser detection, which is illustrated by simulation results. Finally, a field programmable gate array (FPGA) design of the detector is presented. The detection performance obtained from the fixed-point FPGA implementation shows a good match to the floating-point implementation.
基金supported by the Key Laboratory of Advanced Display and System Application(Shanghai University),Ministry of Education,China(Grant No.P200803)the Postgraduate Innovation Foundation of Shanghai University(Grant No.SHUCX112372)
文摘In this paper, a multi-functional development platform for flat panel display (FPD) development is proposed. With the proposed development platforms, a variety of FPD devices, including organic light-emitting diode (OLED) screens, liquid crystal display (LCD) screens with touchscreens, OLED microdisplay screens, etc., can be directly and instantly connected, examined and utilized. A field-programmable gate array (FPGA) is used in the development system to drive different types of FPD devices, and ARM11S3C6410 is used as the application processor to provide various services. The development system uses Linux as the system kernel, Qt for Embedded Linux as the UI framework, various system libraries for video and audio services, and a custom-made user engine for fine-polished appearance and behavior. The development platform has been used not only in testing and verification of the FPD devices, but also in building OLED-powered handheld digital devices, shortening the development cycle from OLED devices to mature application products.
基金Natural Science Foundation of Shanxi Province(No. 2009011023)
文摘Aiming at high requirements of temperature measurement system in high temperature,high pressure,highly corrosive and other special environments,a temperature acquisition system based on field-programmable gate array(FPGA) which is the controller of the system is designed.Also a Flash memory is used as the memory and an erosion thermocouple is used as sensor of the system.Compared with the traditional system using complex programmable logic device(CPLD)and microcontroller unit(MCU)as the main body,this system has some advantages,such as short response time,small volume,no loss of data once power is off,high precision,stability and reliability.And the sensor of the system can be reused.In this paper,boiling water experiment is used to verify accuracy of the system.The millisecond level signal from firecrackers is for verifying the stability and fast response characteristics of the system.The results of experiment indicate that the temperature measurement system is more suitable for the field of explosion and other environments which have high requirements for the system.
文摘High performance hardware architecture for depth measurement by using binocular-camera is proposed.In the system,at first,video streams of the target are captured by left and right charge-coupled device(CCD)cameras to obtain an image including the target.Then,two different images with two different view points are obtained,and they are used in calculating the position deviation of the image's pixels based on triangular measurement.Finally,the three-dimensional coordinate of the object is reconstructed.All the video data is processed by using field-programmable gate array(FPGA)in real-time.Hardware implementation speeds up the performance and reduces the power,thus,this hardware architecture can be applied in the portable environment.