The passive film-induced stress and the susceptibility to SCC of 7050 aluminum alloy in 3.5%sodium chloride solution at various pH values were investigated by slow strain rate testing（SSRT） and flowing stress differ...The passive film-induced stress and the susceptibility to SCC of 7050 aluminum alloy in 3.5%sodium chloride solution at various pH values were investigated by slow strain rate testing（SSRT） and flowing stress differential method.The results showed that the passive film-induced stress and the susceptibility to SCC decreased with increasing pH values when pH≤7,while they increased with increasing pH values when pH7.However,the corrosion type was interpreted as exfoliation corrosion when pH=l and 14,and there was no film formed on the surface of the specimens.The whole variation plots of film-induced stress and the SCC susceptibility with pH values were both presented as a valley shape.The symbol and amount of the film-induced stress were related to the compositions of the passive film,which were analyzed using X-ray photoelectron spectroscopy（XPS）.展开更多
The α-Ti foil with protective layer in one side bended to corrosion surface gradually during corrosion process in 0.1 mol/L H2SO4, while the passive film was formed, i.e., a tensile stress was developed in the surfac...The α-Ti foil with protective layer in one side bended to corrosion surface gradually during corrosion process in 0.1 mol/L H2SO4, while the passive film was formed, i.e., a tensile stress was developed in the surface layer of the sample. The extra tensile Stress grew gradually, whose maximum value is =313 MPa (average of 5 samples), which is near or reaches the yield stress. The extra tensile stress would be added to the load Stress during SCC to facilitate the emission and motion of dislocation, so that SCC cracks could nucleate in lower Stress(or lower KI).展开更多
This paper describes recent levels of surfactants measured in a coastal lagoon ecosystem highly stressed by human activites: the Orbetello lagoon (Southern Tuscany, Italy, Ramsar Site IT008). Significance of differenc...This paper describes recent levels of surfactants measured in a coastal lagoon ecosystem highly stressed by human activites: the Orbetello lagoon (Southern Tuscany, Italy, Ramsar Site IT008). Significance of difference among concentrations measured before and after summertime are explored in order to evaluate effects related to tourism exploitation. Among surfactants, methylene blue active anionic substances (MBAS) are selected as tracers for untreated discharges originated by domestic and urban activities. Water samplings were performed in 2011 following a randomly replicated nested logic model (n = 144). MBAS mean level of 0.070 mg.L–1 (–1) and 0.530 mg.L–1 (–1) are respectively recorded in June and October evidencing a significant increase after the touristic season. Possible MBAS concentration phenomena could be induced by different evaportaton rates among sampling stations and between winter and summer seasons and were evaluated, in this study, using water salinity as possible factor affecting samples segregations. Results evidence that differences of MBAS levels related to evaporation rates are trascurabile if compared to the variability induced by the presence of not-collected wastewater hot-spot pollution sources located closed around the urban settlement and along sandbars. Measured levels of surfactants could act negatively on living organisms both animals and plants contributing to affect Orbetello lagoon biodiversity. In this ecosystem, after the complete reorganization of urban wastewater treatment plants occured in 2008, further management actions should be focalized on reducing untreated sources of MBAS.展开更多
Finite element analyses including a cohesive zone model （CZM） were conducted to investigate the role of corrosion product films （CPFs） in stress corrosion cracking （SCC） for copper in an ammoniacal solution. It ...Finite element analyses including a cohesive zone model （CZM） were conducted to investigate the role of corrosion product films （CPFs） in stress corrosion cracking （SCC） for copper in an ammoniacal solution. It is found that a tensile CPF-induced stress generates near the interface between the CPF and the copper substrate at the substrate side in front of the notch tip for a U-shaped edgenotched specimens. The CPF-induced stress is superimposed on the applied stress to enhance emission and motion of dislocations. The peak opening stress （S11） increases with an increase in CPF thickness and a decrease in CPF Young＇s modulus. Damage mechanics based on the CZM was applied to study the stress corrosion crack initiation and propagation by analyzing the stress redistributions and load-displacement curves. The results show that the crack initiates first in the CPF and then propagates to the copper substrate. The fracture strain of the specimen covered a CPF is lower than that without a CPF. Based on the simulation results, the mechanism of the CPF-induced SCC, which promoted the initiation and propagation of the stress corrosion cracks, was discussed.展开更多
基金Funded by the National Natural Science Foundation of China(No.51371039)
文摘The passive film-induced stress and the susceptibility to SCC of 7050 aluminum alloy in 3.5%sodium chloride solution at various pH values were investigated by slow strain rate testing（SSRT） and flowing stress differential method.The results showed that the passive film-induced stress and the susceptibility to SCC decreased with increasing pH values when pH≤7,while they increased with increasing pH values when pH7.However,the corrosion type was interpreted as exfoliation corrosion when pH=l and 14,and there was no film formed on the surface of the specimens.The whole variation plots of film-induced stress and the SCC susceptibility with pH values were both presented as a valley shape.The symbol and amount of the film-induced stress were related to the compositions of the passive film,which were analyzed using X-ray photoelectron spectroscopy（XPS）.
文摘The α-Ti foil with protective layer in one side bended to corrosion surface gradually during corrosion process in 0.1 mol/L H2SO4, while the passive film was formed, i.e., a tensile stress was developed in the surface layer of the sample. The extra tensile Stress grew gradually, whose maximum value is =313 MPa (average of 5 samples), which is near or reaches the yield stress. The extra tensile stress would be added to the load Stress during SCC to facilitate the emission and motion of dislocation, so that SCC cracks could nucleate in lower Stress(or lower KI).
文摘This paper describes recent levels of surfactants measured in a coastal lagoon ecosystem highly stressed by human activites: the Orbetello lagoon (Southern Tuscany, Italy, Ramsar Site IT008). Significance of difference among concentrations measured before and after summertime are explored in order to evaluate effects related to tourism exploitation. Among surfactants, methylene blue active anionic substances (MBAS) are selected as tracers for untreated discharges originated by domestic and urban activities. Water samplings were performed in 2011 following a randomly replicated nested logic model (n = 144). MBAS mean level of 0.070 mg.L–1 (–1) and 0.530 mg.L–1 (–1) are respectively recorded in June and October evidencing a significant increase after the touristic season. Possible MBAS concentration phenomena could be induced by different evaportaton rates among sampling stations and between winter and summer seasons and were evaluated, in this study, using water salinity as possible factor affecting samples segregations. Results evidence that differences of MBAS levels related to evaporation rates are trascurabile if compared to the variability induced by the presence of not-collected wastewater hot-spot pollution sources located closed around the urban settlement and along sandbars. Measured levels of surfactants could act negatively on living organisms both animals and plants contributing to affect Orbetello lagoon biodiversity. In this ecosystem, after the complete reorganization of urban wastewater treatment plants occured in 2008, further management actions should be focalized on reducing untreated sources of MBAS.
基金financially supported by the National Natural Science Foundation of China(No.51371035)the National High Technology Research and Development Program of China(No.2013AA031104)
文摘Finite element analyses including a cohesive zone model （CZM） were conducted to investigate the role of corrosion product films （CPFs） in stress corrosion cracking （SCC） for copper in an ammoniacal solution. It is found that a tensile CPF-induced stress generates near the interface between the CPF and the copper substrate at the substrate side in front of the notch tip for a U-shaped edgenotched specimens. The CPF-induced stress is superimposed on the applied stress to enhance emission and motion of dislocations. The peak opening stress （S11） increases with an increase in CPF thickness and a decrease in CPF Young＇s modulus. Damage mechanics based on the CZM was applied to study the stress corrosion crack initiation and propagation by analyzing the stress redistributions and load-displacement curves. The results show that the crack initiates first in the CPF and then propagates to the copper substrate. The fracture strain of the specimen covered a CPF is lower than that without a CPF. Based on the simulation results, the mechanism of the CPF-induced SCC, which promoted the initiation and propagation of the stress corrosion cracks, was discussed.
