Experimental Research on Desulfurization of Fine Coal Using an Enhanced Centrifugal Gravity Separator

A desulphurization experimental study under the effects of compounding physical force fields has been described for 〈 0.5 mm fine particles of high sulfur coal. A statistical test using the Box-Behnken Design of experiments was conducted to evaluate the effects of individual operating variables and their interactions on desulfurization of fine coal using an enhanced centrifugal gravity separator. A model describing the relation between desulphurization efficiency of pyrite sulfur and different operating variables has been designed. The interactions between different factors on the pyrite sulfur desulphurization efficiency have been analysed. The optimal test conditions for desulfarization are extracted from the Design-Expert 6.0 software. Finally, the pointed out. advantage of centrifugal gravity separation for fine coal is pointed out.

An Entrapment Model of Water Flow on Fine Coal Flotation

Effect of entrapment of water flow on fine coal flotation was studied. The relation between constant of water flotation rate and flotation time was investigated and the water recycling model determined. The entrapment model of water flow about the relation between the recovery of fine particle and that of water in concentration was established. Finally, the equation about ash in fine clean coal at any time was derived by introducing a de-ashing coefficient.

Surface Modification Mechanism of Fine Coal by Electrochemical Methods

In order to reveal the surface modification mechanism of fine coal by electrochemical methods, the structural changes of the coal surface before and after electrochemical modification were investigated by Fourier Transform In- frared Spectra (FTIR) and Raman Spectra. The results show that under certain electrochemical conditions, the oxy- gen-containing functional group in the coal structure and the oxygen content of absorption could be reduced and the floatability of coal improved. At the same time, the sulfur in the coal was reduced to the hydrophilic S2– which could be separated easily from coal. Thus electrochemical modification methods could be used to change the structure and func- tional group on the coal surface and to enhance the floatability of coal.

THE STUDY OF THE BASIC THEORY AND THE APPLICATION OF REMOVAL PYRITE AND ASH FROM FINE COAL WITH ELECTROSTATIC SEPARATOR

The effect of removing pyrite and ash ffom fine coal with electrostatic separator is determined by the electric property of coal, the distribution of corona ion and etectrostatic field, and the disperse and even feed. The dielectric constant of coal and mineral matter is studied in this paper and the amendment has been made to survey theory. The oscillogram is adopted to study the distribution of corona ion and electrostatic field.The paper details the study of remoing pyrite and ash from fine coal, and the test results demonstrate the high efficiency of removing pyrite and ash with electrostatic separator.

Cake forming and filtering time in the spiral discharging fine coal filtering centrifuge

Based on the realization of moving-bed cake filtering, the concepts of static-bed filtering time and moving-bed fil- tering time in the helical-conveyor fine coal filtering centrifuge were proposed, and the mathematic relations between the time defined and the main factors related were studied in detail. The results show that the static-bed filtering time is the function of the spiral heads and the rotation rate deference between the spiral and the porous drum, while the moving-bed filtering time is the function of the cone angle of the porous drum, the radius of the porous drum, the spiral angle, and the rotation rate deference. The functions deduced are of great significance for fine coal filtering centrifuge＇s parameters determining and optimizing. It is shown that the filtering centrifuge with smaller spiral angle, smaller rotation rate deference, and smaller cone angle may do a better job for fine coal dewatering.

Ash Depression in Fine Coal Flotation Using a Novel Polymer Aid

The current study investigated the effects of novel hybrid polyacrylamide polymers as ash (slime) depressants in fine coal flotation to enhance combustible recovery and ash rejection. Coal samples at P80 of approximately 45 um with ~25% ash content were floated in the presence of in-house synthesized hybrid aluminum hydroxide polyacrylamide polymers (Al(OH)3-PAM, or Al-PAM). All flotation experiments were carried out in a 5-L Denver flotation cell. Various influencing factors were examined to optimize the flotation process in the presence of the Al-PAM polymers, including the Al-PAM dosage, Al-PAM conditioning time, impeller rotation speed and pulp pH. Comparative and synergistic studies were also performed using organic polyacrylamide polymers (PAMs), commercial dispersants and Al-PAM/dispersant system. Results showed a significant improvement in both combustible recovery and ash rejection at an Al-PAM dosage of 0.25 mg/L. The maximum combustible recovery obtained, at natural pH, with Al-PAM and Al-PAM/dispersant system was determined to be 70% and 66% at ash content of 7.74% and 7.4%, respectively. Zeta potential values of both the raw coal and concentrate products showed a large shift toward more positive values (from ˉ50 mV to ˉ13 mV), indicating a significant decrease in ash-forming minerals (slimes) when Al-PAM polymers were applied.

FLOTATION RATE CONSTANT MODE FOR FINE COAL

The density of fine coal has a major effect on the value of its flotation rate constant. The collector dose can increase the flotation rate of fine coal, especially for low ash coal, but the effect for gangue is not notable. The flotation rate of gangue is mainly governed by the water entrainment. A coal flotation rate constant model has been developed.

Application of Water-Soluble Polymer in Dewatering of Fine Coal

The addition of water-soluble polymer to a fine coal slurry to enhance dewatering process is considered to be one of the most effective ways of solving the problems of dewatering of fine coal. A series of tests are conducted with a vacuum dewatering apparatus to study the effects of various factors such as the species of polymer, polymer dosage and its ways of addition, and the pH of fine coal slurry on filtrating and dewatering of fine coal.

Study of Cyclonic Microbubble FlotationColumn and Its Application to Fine Coal Processing

This paper deals with the operation principle of the cyclonic microbubble flotation column and its structure characterisics. The pilot test results and the commercial applied results of cyclonic microbubble flotation column for fine coal processing are also introduced. The test results proved that the cyclonic microbubble flotation column has many advantages suck as high selectivity, high efficiency in ash rejection from fine coals, low comsumption of energy, easy operation and maintenance, etc. It is a kind of equipment widely applied to fine coal processing.

Structural properties of residual carbon in coal gasification fine slag and their influence on flotation separation and resource utilization:A review

Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expansion of the field of the high value-added utilization of FS-RC.

Effective separation of coal gasification fine slag: Role of classification and ultrasonication in enhancing flotation

Effective separation of residual carbon and ash is the basis for the resource utilization of coal gasification fine slag(CGFS).The conventional flotation process of CGFS has the bottlenecks of low carbon recovery and high collector dosage.In order to address these issues,CGFS sample taken from Shaanxi,China was used as the study object in this paper.A new process of size classification-fine grain ultrasonic pretreatment flotation(SC-FGUF)was proposed and its separation effect was compared with that of wholegrain flotation(WGF)as well as size classification-fine grain flotation(SC-FGF).The mechanism of its enhanced separation effect was revealed through flotation kinetic fitting,flotation flow foam layer stability,particle size composition,surface morphology,pore structure,and surface chemical property analysis.The results showed that compared with WGF,pre-classification could reduce the collector dosage by 84.09%and the combination of pre-classification and ultrasonic pretreatment could increase the combustible recovery by 17.29%and up to 93.46%.The SC-FGUF process allows the ineffective adsorption of coarse residual carbon to collector during flotation stage to be reduced by pre-classification,and the tightly embedded state of fine CGFS particles is disrupted and surface oxidizing functional group occupancy was reduced by ultrasonic pretreatment,thus carbon and ash is easier to be separated in the flotation process.In addition,some of the residual carbon particles were broken down to smaller sizes in the ultrasonic pretreatment,which led to an increase in the stability of flotation flow foam layer and a decrease in the probability of detachment of residual carbon particles from the bubbles.Therefore,SCFGUF could increase the residual carbon recovery and reduce the flotation collector dosage,which is an innovative method for carbon-ash separation of CGFS with good application prospect.

Motion characteristics and density separation of fine coal in an inflatable-inclined liquid-solid fluidized bed

To improve the adaptability of fluidized beds for fine coal separation,a new type of liquid-solid fluidized bed was constructed,i.e.,the inflatable-inclined liquid-solid fluidized bed(IILSFB).A combination of simulation analysis and separation experiments was used to analyze the fluidization characteristics and separation performance of the IILSFB.The results showed that there was upflow and downflow in the fluidized bed.The upflow was mainly composed of water flow,followed by light and heavy particles;on the other hand,the downflow was caused by the backflow of heavy particles that settled at the inclined section.In addition,the light particles that settled at the inclined section could return to the rising water flow under the action of secondary airflow.As the water velocity,separation time,and secondary gas velocity increased,the comprehensive separation efficiency of fine coal in the fluidized bed improved,while the value decreased as the feed quantity increased.This also indicated the order of importance for these four factors,i.e.,water velocity,separation time,feed quantity,and secondary gas velocity,on fluidisation.Furthermore,the comprehensive separation efficiency of 0.1-1 mm fine coal varied significantly with various factors,while that of∼0.1 mm and 1-3 mm fine coal was always at a low value.In the latter case,the classification process of the size fraction was significantly better than the separation process in the fluidized bed.Under optimal working conditions,an IILSFB was used to separate the fine coal(0.1-1 mm).The yield of clean coal was 37.95% with an ash content of 12.11%,and the possible error was 0.085 g/cm^(3),indicating that the IILSFB had good separation performance for 0.1-1 mm fine coal.

Particle mixing behavior of fine coal in density control of gas-solid separation fluidized bed

In a gas-solid separation fluidized bed,mixing of fine coal is necessary to achieve a suitable bed density to enable effective separation of low rank coal.On the basis of a variety of mixture models,a gas-solid separation fluidized bed was judged,where fine coal particles of 0.6-1.0mm were uniformly mixed with magnetite powder.High-speed dynamic camera technology was combined with a slump-sampling method to study the mixing process of the fine coal in the fluidized bed.These results showed that limitations of the fluidized bed structure cause the mixing process to be dominated by lateral diffusion and supplemented by axial diffusion.Axial diffusion was mainly achieved through the ascension of bubbles,whereas lateral diffusion was determined by the bursting action of the gas bubbles at the surface of the bed and the undulating characteristics of the bed.The effective lateral diffusion coefficient increased exponentially with gas velocity but had no strong relationship with the bed height.As the feed point moved toward the center,fine coal began to diffuse to both sides,which shortened the time for the bed density stabilization from 20 to 5 min.The bed density of the layer was stabilized at approximately 1.75 g/cm3.The separation efficiency of the gas-solid separation fluidized bed containing binary mixtures was more obvious for 6-50 mm raw coal,with a probable error E of 0.16.

Carburization of ferrochromium metals in chromium ore fines containing coal during voluminal reduction by microwave heating

Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O)-n(C) (molar ratio) as 1.00-0.84 and n(SiO2)-n(CaO) as 1.00-0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0-10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio.

Effect of a starch-based filter aid on the dewatering of fine clean coal

The dewatering of fine, flotation cleaned coals from Huaibei and Xuzhou (bituminous) and Yongcheng (anthracite) were studied. The supernatant and filter cake were examined to determine the rate and extent of flocculation and dewatering. A starch-based filter aid was used to increase flocculation and dewatering rates. The filtration constant, K, and compression index, s, of the Yongcheng slurry were measured under various conditions. A designed experiment was performed to determine optimum conditions for dewatering. The results showed that the filter aid enhanced flocculation and coagulation of the fine cleaned coal slurry, enhanced the structure of the filter cake and promoted dewatering of the cake. Moisture content in the cake was reduced to 17% after vacuum filtration.

New Progress on the Coal Fines Affecting the Development of Coalbed Methane

Objective The production of coal fines is very common in the development of coalbed methane（CBM）in the eastern margin of the Ordos Basin,China.A large amount of produced coal fines seriously affect the productivity of CBM wells（Wei Yingchun et al.,2013）.Therefore,the production problems of CBM wells caused by coal fines have attracted extensive attention.

Physical properties and filter cake structure of fine clean coal from flotation

In order to improve the dewatering rate and the effect of fine clean coal(FCC), the advanced method offine coal( 0.5 mm) dewatering and the correlated basic theory were investigated in this study. It was found that the dewatering by sleeve type press filter was an efficient way of FCC dewatering. On the other hand, the results also proved that particle size distribution, volatile matter, ash content, pore size distribution and specific surface area of coal particles of FCC samples, as well as viscosity and density of FCC slurry, were important parameters in determining the process of efficient dewatering. Especially, wet mass to dry mass, specific resistance of average mass, compressibility factor and microstructure of filter cake explained the reasons and mechanisms of fine clean coal efficient dewatering.

AN INVESTIGATION OF THE HYDROPHOBIC AGGLOMERATION CHARACTERISTICS OF EASY DEGRADATION COAL FINES IN WATER

The separation of ultrafine coal from three Chinese coal samples of easy degradation coal fines in water has been investigated by the application of a hydrophobic agglomeration process. In addition to yielding clean coal with high recovery, this process requires significantly less oil concentration for agglomeration (less than 0.4% in oil-water weight ratio) and produces stabler agglomerates than general oil agglomeration process, the cost of the oil would no longer be an important consideration for its commercial application. Neutral diesel oil was used to make oleophilic coal particles agglomerated with good rejection of clay minerals under little oil consumption and certain agitation speed at 2000 r/min. An important advantage of this process compared with other cleaning fine coal methods is that it can extremely reduce or eliminate the effects of coal degradation and some clay minerals on coal preparation.

煤层气储层气-液-固多相渗流规律研究

揭示储层非饱和流阶段煤粉运移产出规律,对煤层气高效排采具有重要现实意义。基于气-液-固三相流模拟装置,通过设定不同煤粉粒径、注入流速、裂缝宽度和煤粉质量分数等条件,开展了煤层气储层非饱和流阶段煤粉产出运移特征试验,并分析了煤粉沉淀量、产出量及煤岩气相与液相渗透率变化特征。研究表明:随着裂缝宽度增加,煤粉产出量呈现出逐渐增大的趋势,沉淀量呈现出先增大后减小的变化特征,在裂缝宽度为0.1 mm时达到最大值;随着煤粉质量分数的增大,产出量表现为先增大后减小(峰值点在0.15‰附近),沉淀量逐渐增大,说明煤粉在储层中运移存在一定的单位体积含量极值,超过极值后,煤粉将大量沉淀并堵塞孔裂隙;合理控制煤层气产水产气速率,能够有效地控制煤粉的产出,煤粉沉淀量和产出量随着注入流速的增长均呈现出先增大后减小的趋势,注入流速为5.0 mL/min时的煤粉沉积量最大,在流速为7.5 mL/min时煤粉产出量相对较高;液相渗透率演化特征呈现出逐渐降低和先稳定后逐渐降低2种变化趋势,气相渗透率演化特征较为复杂;综合注入压力、煤岩渗透率变化、煤粉产出和沉淀特征,可将煤粉在裂缝中运移划分为缓慢沉积、快速沉积和完全堵塞3个阶段。