Fingerprint singular points extraction based on orientation tensor field and Laurent series

Singular point(SP)extraction is a key component in automatic fingerprint identification system(AFIS).A new method was proposed for fingerprint singular points extraction,based on orientation tensor field and Laurent series.First,fingerprint orientation flow field was obtained,using the gradient of fingerprint image.With these gradients,fingerprint orientation tensor field was calculated.Then,candidate SPs were detected by the cross-correlation energy in multi-scale Gaussian space.The energy was calculated between fingerprint orientation tensor field and Laurent polynomial model.As a global descriptor,the Laurent polynomial coefficients were allowed for rotational invariance.Furthermore,a support vector machine(SVM)classifier was trained to remove spurious SPs,using cross-correlation coefficient as a feature vector.Finally,experiments were performed on Singular Point Detection Competition 2010(SPD2010)database.Compared to the winner algorithm of SPD2010 which has best accuracy of 31.90%,the accuracy of proposed algorithm is 45.34%.The results show that the proposed method outperforms the state-of-the-art detection algorithms by large margin,and the detection is invariant to rotational transformations.

Primary Recrystallization of Grain Oriented Silicon Steel Strip Rolled by CSR and Annealed in Magnetic Field

The magnetic properties and textures of grain oriented silicon steel with different thickness rolled by cross shear rolling （CSR） of different mismatched speed ratio （MSR） and annealed in magnetic field under hydrogen were presented.Effects of the factors such as thickness and mismatched speed ratio on the magnetic properties and recrystallization texture were analyzed and the recrystallization principles in magnetic field annealing were discussed. The study would provide a new route for mass production of high quality ultra-thin grain oriented silicon steel strip.

Fingerprint Matching Based on Local Relative Orientation Field

A fingerprint matching method based on local relative orientation field is proposed. It extracts local relative orientation field around each minutia for minutiae matching. Local orientation features are also used to sorting minutiae in order to speed up searching a minutia when pairing minutiae. The experimental result reveals that this method achieves improved recognition accuracy. Key words fingerprint matching - ridge-based minutiae matching - local relative orientation field - sorting minutiae CLC number TP 391 Foundation item: Supported by the National Natural Science Foundation of China (60373023)Biography: ZHU En (1976-), male, Ph. D candidate, research direction: pattern recognition, image processing and information security.

Density and temperature reconstruction of a flame-induced distorted flow field based on background-oriented schlieren(BOS) technique

An experimental system based on the background-oriented schlieren（BOS） technique is built to reconstruct the density and temperature distribution of a flame-induced distorted flow field which has a density gradient. The cross-correlation algorithm with sub-pixel accuracy is introduced and used to calculate the background-element displacement of a disturbed image and a fourth-order difference scheme is also developed to solve the Poisson equation. An experiment for a disturbed flow field caused by a burning candle is performed to validate the built BOS system and the results indicate that density and temperature distribution of the disturbed flow field can be reconstructed accurately. A notable conclusion is that in order to make the reconstructed results have a satisfactory accuracy, the inquiry step length should be less than the size of the interrogation window.

Bifurcations and chaos in indirect field-oriented control of induction motors

Stability of indirect field-oriented control (IFOC) of induction motor drives is greatly influenced by estimated value of rotor time constant. By choosing estimation error of rotor time constant as bifurcation parameter, the conditions of generating Hopf bifurcation in IFOC drives are analyzed. Dynamic responses and Lyapunov exponents show that chaos and limit cycles will arise for some ranges of load torque with certain PI speed controller setting. Stable drives are required for conventional applications, but chaotic rotation can promote efficiency or improve dynamic characteristics of drives. Thus, the study may be a guideline for designing a stable system or an oscillating system.

Local Orientation Field Based Nonlocal Means Method for Fingerprint Image De-Noising

The de-noising of the fingerprint image is one of the key tasks before the extraction of the minutiae in automatic fingerprint matching. When used for de-noising the fingerprint image, the nonlocal means method can not preserve the local minutiae in the fingerprint image very well. To address this problem, we propose a local orientation field based nonlocal means (NLM-LOF) method in this paper. Experimental results on the simulated and real images show that the proposed method can suppress noise effectively while preserving edges and details in the fingerprint image and it outperforms the state-of-art nonlocal means method in terms of qualitative metrics and visual comparisons.

Characteristics of LDPE and Oriented Montmorillonite Nanocomposites Produced by Electric Field-inducement

In order to make montmorillonite (MMT) nanosheets disperse in low-density polyethylene (LDPE) with highly homogeneous orientation, alternating voltage is applied to molten LDPE with MMT nanosheets. The effect of electric field on the dispersion of MMT in the solidified LDPE is studied. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses suggest that the MMT nano- sheets are aligned with high anisotropy to the electric field direction, which is perpendicular to the LDPE film plane. Differential scanning calorimetry (DSC) results reveal that the crystallization degree of the oriented LDPE/MMT composite increases. Moreover, through a broadband dielectric spectroscopy analyzer, it is found that MMT manifests a significantly influence in the dielectric property of the oriented composite: the dielectric constant and loss tangent of the composite both become larger. Analysis shows that the electric field-induced torque caused by the polarization of MMT flakes is the main force inducing the orientation of the MMT flakes.

Temperature Field Reconstruction in High-Temperature Gas by Using the Colored Background Oriented Schlieren Method

A 3D temperature field reconstruction method using the colored background oriented schlieren(CBOS)method is proposed to address image blurring due to the different refractive index of the multi-wavelength light and significant errors produced when the traditional background oriented schlieren(BOS)method is applied to high-temperature gas.First,the traditional method is employed to reconstruct the non-uniform 3D temperature field.Second,the CBOS method is applied to correct the distortion.Then,by analyzing the correlation coefficient among different color points of the colored background pattern,the non-uniform temperature field is reconstructed much more accurately.Finally,the experimental results are verified by applying the Runge-Kutta ray-tracing method and the thermocouple contact measurement method.The maximum average temperature error of the CBOS-reconstructed temperature field is 12.92°C,compared with the thermocouples.Therefore,an accurate three-dimensional reconstruction of the temperature field can be achieved by the proposed method effectively.

Source localization based on field signatures:Laboratory ultrasonic validation

Location awareness in wireless networks is essential for emergency services,navigation,gaming,and many other applications.This article presents a method for source localization based on measuring the amplitude-phase distribution of the field at the base station.The existing scatterers in the target area create unique scattered field interference at each source location.The unique field interference at each source location results in a unique field signature at the base station which is used for source localization.In the proposed method,the target area is divided into a grid with a step of less than half the wavelength.Each grid node is characterized by its field signature at the base station.Field signatures corresponding to all nodes are normalized and stored in the base station as fingerprints for source localization.The normalization of the field signatures avoids the need for time synchronization between the base station and the source.When a source transmits signals,the generated field signature at the base station is normalized and then correlated with the stored fingerprints.The maximum correlation value is given by the node to which the source is the closest.Numerical simulations and results of experiments on ultrasonic waves in the air show that the ultrasonic source is correctly localized using broadband field signatures with one base station and without time synchronization.The proposed method is potentially applicable for indoor localization and navigation of mobile robots.

Fabrication and Field Emission of Silicon Nano-Crystalline Film

The silicon nano-crystalline (nc-Si) film is fabricated on <100> orientation,0.01Ω·cm resistivity,and p-type boron-doped silicon wafer by the anodic etching.The microstructure and the orientation of nc-Si are examined by the scanning electron microscopy,transmission electron microscopy,and X-ray diffraction spectroscopy,respectively.The average size of particle is estimated by Raman spectroscopy.The results show that the particle size of nc-Si film is scattered from 10nm to 20nm,the alignment is compact,the orientation is uniform,the expansion of lattice constant is negligible,and mechanical robustness and stability are good.The correlations between film structure and the experiment parameters such as etching time,HF concentration,and etching current density are discussed.As a potential application,efficient field emission is observed from the nc-Si film,and the turn-on field is about 3V/μm at 0.1μA/cm 2 of current density,which is close to carbon nanotube film's.

定向电场下W_(6)C_(6)团簇的超卤素调制及非线性光学特性

本文采用密度泛函(DFT)方法研究了定向外电场(OEEF)对W_(6)C_(6)团簇几何结构、电子性质以及非线性光学响应(NLO)的影响.计算结果表明W_(6)C_(6)的结构在一定OEEF强度下可以保持稳定.OEEF可以增大W_(6)C_(6)团簇的电子亲和能(EA值),且在特定强度下,OEEF可以将W_(6)C_(6)团簇转变为超卤素.通过对EA值的非线性拟合可以实现对W_(6)C_(6)团簇的连续调制.进一步对不同外电场下W_(6)C_(6)团簇的最高占据分子轨道(HOMO)和最低未占据分子轨道(LUMO)能级进行分析,发现OEEF降低了W_(6)C_(6)团簇LUMO能级是其EA值增大的主因.此外,OEEF可以显著增大W_(6)C_(6)团簇的平均极化率和第一超极化率,尤其是第一超极化率,改变其非线性光学性质.

Effects of Primary Annealing Condition on Recrystallization Texture in a Grain Oriented Silicon Steel

The recrystallization texture in grain oriented silicon steel sheets, which were annealed at different primary annealingtemperatures with and without an electric field, was investigated. An automated electron backscattered diffraction(EBSD) technique was used to analyze the recrystallization texture. It was found that recovery and application ofelectric field in primary annealing lead to an increase of {001} component and a decrease of {111} component afterannealing at 900℃. The development of recrystallization texture can be explained in terms of the effects of electricfield and primary annealing temperature on recovery.

Orientation and alignment during materials processing under high magnetic fields

The characteristics of lattice structures can make crystal possess distinct anisotropic features, such as the varying magnetism in different crystal orientations and different directions. The anisotropic magnetism can also cause the free energy to vary in different orientations of crystal in a magnetic field(magnetic anisotropy energy). Magneto-anisotropy can make the crystal rotate by the magnetic force moment on the crystal with the easy axis towards the direction of the magnetic field, and can also promote the preferential growth along a certain crystal direction at the lowest energy state.By solidification, vapor-deposition, heat treatment, slip casting and electrodeposition under magnetic field, the crystal structure with high grain orientation is obtained in a variety of binary eutectics, peritectic alloys, multicomponent alloys and high temperature superconducting materials. This makes it possible to fabricate texture-functional material by using high magnetic field and magneto-crystalline anisotropy of crystal. The purpose of this article is to review some recent progress of the orientation and alignment in material processing under a high magnetic field.

Effect of high magnetic fields on the solidification microstructure of an Al-Mn alloy

The effect of high magnetic fields on the morphology of Al-Mn phases was investigated. It is found that the tropism and the alignment of Al6Mn precipitated phases become regular under high magnetic fields. The stronger the high magnetic fields, the more regular the alignment of Al6Mn precipitated phases. Al6Mn precipitated phases can generate oriented alignment and aggregation under high magnetic fields through the observation of the quenched microstructure of the Al-Mn alloy at different temperatures. Meanwhile, the number of Al6Mn phases increases continuously along with the increasing function time of high magnetic fields. X-ray diffraction also indicates that Al6Mn phases generate obvious tropism under high magnetic fields. The process of aggregation and growth of Al6Mn precipitated phases under the function of high magnetic fields after orientation were analyzed and discussed.

ANALYSIS AND CHARACTERIZATION OF MICROSCOPIC MORPHOLOGY AND ORIENTATION STRUCTURE OF POLYANILINE POLYMERIZED IN A CONSTANT MAGNETIC FIELD

Conductive polyaniline(PAn-_M and PAn-_O) doped with dodecylbenzene sulfonic acid(DBSA) was synthesized by using emulsion polymerization method in the presence of a constant magnetic field(0.4 T) and the absence of magnetic field, respectively.The effects of magnetic field on the microscopic morphology and orientation structure of PAn were generally analyzed and characterized by using transmission electron microscope(TEM),X-ray diffraction(XRD) and through the conductivity anisotropy of unit resistance of t...

Crystal orientation and corrosion resistance of CuNi10Fe1Mn alloy billet under rotating electromagnetic field

CuNi10Fe1Mn alloy billet under rotating electromagnetic field (REF) was characterized in this work. The change of the crystal orientation was first explored by X-ray diffraction (XRD) and scanning election microscope (SEM); the corrosion resistance was done by three electrodes system, and the natural sea water was used as corrosion medium. The results demonstrate that the strongest crystal orientation is transformed from crystal plane (200) to (111); moreover, the crystal plane (111) whose intensity is the strongest on the cross section and vertical section with REF causes the tubes be rolled easily, and the corrosion resistance of the billet is increasing with REF. As a result, properties of CuNi10Fe1Mn alloy tubes can be improved by REF.

Oscillating field stimulation promotes axon regeneration and locomotor recovery after spinal cord injury

Oscillating field stimulation(OFS)is a potential method for treating spinal cord injury.Although it has been used in spinal cord injury(SCI)therapy in basic and clinical studies,its underlying mechanism and the correlation between its duration and nerve injury repair remain poorly understood.In this study,we established rat models of spinal cord contusion at T10 and then administered 12 weeks of OFS.The results revealed that effectively promotes the recovery of motor function required continuous OFS for more than 6 weeks.The underlying mechanism may be related to the effects of OFS on promoting axon regeneration,inhibiting astrocyte proliferation,and improving the linear arrangement of astrocytes.This study was approved by the Animal Experiments and Experimental Animal Welfare Committee of Capital Medical University(supplemental approval No.AEEI-2021-204)on July 26,2021.

On Mars, Location and Orientation of Dykes Exposed along the Valles Marineris Walls Reveal Expected and Unexpected Stress Fields

Structural and geomorphological analysis of the Martian surface in the visible spectral range using the NASA/Viking images in the 90’s,complemented by experimental modelling(Mège and Masson,1996a;Mège et al.,2003)suggested that the Valles Marineris trough(chasma)system is aligned with a mafic dyke swarm,named the Syria Planum Dyke Swarm.Cross-cutting relationships and

Analysis and Characterization of Orientation Structure of Pre-oxidized PAN Fibers in High Magnetic Fields

PAN fibers pre-oxidized at 240℃, 260℃, 280℃, 300℃ were treated in 8 T, 12 T, 16 T high magnetic fields, respectively. The experimental result implied that there were two kinds of magnetic units cyan and carbon-nitrogen heterocycle in pre-oxidized PAN fibers, and the movement of magnetic units resulted in changes of orientation structure of pre-oxidized PAN fibers in high magnetic fields. Overall orientation increased with increase of magnetic field intensity and extension of processing time, whereas change of crystalline orientation depended on magnetic field intensity and content of carbon-nitrogen heterocycle due to the competition of two magnetic units. Furthermore, magnetic fields induced the conversion from amorphous region to crystal region and improved crystalline orooerties of ore-oxidized PAN fibers.

Influence factor analysis of field-free molecular orientation

The effects of the characteristics of molecules and external fields on field-free molecular orientation are investigated through the comparison of HBr with LiH driven by the combination of a two-color laser pulse and a time-delayed THz laser pulse. It is shown that the dipole interaction has greater influence on field-free orientation than the hyperpolarizability interaction. In addition to the temperature dependence of orientation degree, the effects of the amplitudes of the two-color laser pulse and THz laser pulse, rising time, and THz laser frequency on molecular orientation are also discussed.