Batik fabric is an integral part of the traditional cloth culture of the Ghanaian traditional setting. However, the batik fabric has marginal usage due to its casual visual appearance. This studio practice seeks to ex...Batik fabric is an integral part of the traditional cloth culture of the Ghanaian traditional setting. However, the batik fabric has marginal usage due to its casual visual appearance. This studio practice seeks to explore the epiphanic revival in the use of metallic finishes on batik substrate to create an enhanced visual appearance with embellished aesthetic sensibilities and diversified use. The researchers adopted the studio-based approach of the qualitative design to manipulate handmade tools, techniques (collagraph) and the batik fabrics through experimentation to produce a glittering mercurial batik fabric which is typically an industrial practice. The studio practice took place at the Textile Design and Technology studio, Takoradi Technical University, Ghana. The traditional batik fabric was manipulated through fabric decoration techniques in accordance with studio-based practices. The Addie model was adopted as a methodological approach in the analysis, design, development, implementation, and evaluation processes of the experimentation processes of the study. Findings revealed that the hand techniques used in the production process for the metallic prints produced interesting accidentals finishes and effects that machine work cannot achieve, producing new discoveries of visual enhancements of traditional batik fabric. Traditional batiks became mercurial with glittery effects. The metallic prints on the fabric also changed its consumption pattern from mere casual fabric to classic and cosmopolitan fabric for varied uses suitable for wearable to non-wearable.展开更多
After more than five years of construction,the world’s biggest single-dish radio telescope was finally ready to open its eye.On September 25,2016,the Fivehundred-meter Aperture Spherical radio Telescope(FAST)was offi...After more than five years of construction,the world’s biggest single-dish radio telescope was finally ready to open its eye.On September 25,2016,the Fivehundred-meter Aperture Spherical radio Telescope(FAST)was officially put into use in a mountainous region of southwest China's Guizhou Province.With a total collecting area equivalent to the size of 30 soccer fields,FAST is expected to accomplish large scale展开更多
The primariy application of rare - earth spin finishes on PET/PA composite super - fine denier fiber has been studied in this paper. It results in the improvement of fi-ber’s properties, such as increased whiteness, ...The primariy application of rare - earth spin finishes on PET/PA composite super - fine denier fiber has been studied in this paper. It results in the improvement of fi-ber’s properties, such as increased whiteness, brightness and brilliance, effective and uniform spliting of compos-ite fiber into super - fine denier fiber and enhanced dye-ing effect.展开更多
The results of an investigation into the effects of various finishing processes on the propertiesof cotton rich mans shirting fabrics are presented and discussed.The KES-FB system was used forthe testing of fabric mec...The results of an investigation into the effects of various finishing processes on the propertiesof cotton rich mans shirting fabrics are presented and discussed.The KES-FB system was used forthe testing of fabric mechanical properties.It is concluded that mercerising cotton rich fabrics is nota cost effective finish process while the optimisation of the bleaching process may bring more bene-fit.The investigation is part of a long term program aimed at the development of an expert systemfor total fabric engineering.展开更多
This study demonstrated that the changes in functional properties of both woven and knit cotton fabrics were determined to evaluate the performance of different special finishes. Here, 100% cotton fabrics were treated...This study demonstrated that the changes in functional properties of both woven and knit cotton fabrics were determined to evaluate the performance of different special finishes. Here, 100% cotton fabrics were treated with different types of finishing chemicals at different formulations. To assess the performance of different finishes on fabric properties, GSM, bursting strength, tensile strength, dimensional stability, absorbency, crease recovery angle with ASTM and AATCC methods were done. The results showed that the functional properties of the finished cotton fabrics both woven and knit depend to a great extent on the type of finish.展开更多
This study demonstrated that the variation in physical and chemical performance on cotton double jersey knit fabrics was decided by the knit structure, water repellent chemicals types and their concentration. Here, tw...This study demonstrated that the variation in physical and chemical performance on cotton double jersey knit fabrics was decided by the knit structure, water repellent chemicals types and their concentration. Here, two types of double jersey fabrics were treated with different types of water repellent chemicals at different formulations to evaluate the performance of water repellent finishes on knit fabrics properties. The levels of water repellency of the fabrics were assessed by AATCC 127 hydrostatic head test method and by ISO 4920:2012 spray rating test method. To evaluate the performance of water repellent finishes on knit fabric properties, GSM, bursting strength test according to ASTM (D 3786-87) method, air permeability, color fastness to wash, water, perspiration, chlorinated water and color fastness to rubbing with ISO method were done. The results showed that both physical and chemical properties of the finished cotton knits, depend to a great extent on knit structure, the water repellent finish type and concentration to obtain water repellent fabrics with desirable properties.展开更多
The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault lo...The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.展开更多
A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-bu...A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.展开更多
Nowadays,the increasing demands from consumer challenges the traditional leather products.Traditional polymer leather finishes gradually lose their dominant position in the market.To address this issue,recent research...Nowadays,the increasing demands from consumer challenges the traditional leather products.Traditional polymer leather finishes gradually lose their dominant position in the market.To address this issue,recent research effort has been devoted to developing polymer-based organic-inorganic nanocomposite leather finishes due to their various functional properties including antibacterial,self-cleaning and water-resistant property.In this review,we provide a comprehensive overview of synthesis of polymer-based organic-inorganic nanocomposites and their application as functional leather finishes.With the perspective of their properties and current challenges,an outlook in the future development about crafting functional and high-quality leather finishes are further proposed.展开更多
After an intensive few years of development,ACG Kinna Automatic and ACG Nystrom–members of TMAS,the Swedish textile machinery association–have delivered the first microfactory for the production of fully finished fi...After an intensive few years of development,ACG Kinna Automatic and ACG Nystrom–members of TMAS,the Swedish textile machinery association–have delivered the first microfactory for the production of fully finished filter bags to a major international filtration industry customer,in cooperation with JUKI Central Europe.展开更多
Monforts–which celebrates its 140th anniversary this year–continues to lead the field in finishing and coating technologies for technical textiles.The company is looking forward to many fruitful discussions on the s...Monforts–which celebrates its 140th anniversary this year–continues to lead the field in finishing and coating technologies for technical textiles.The company is looking forward to many fruitful discussions on the scope of existing and new processes and applications at the forthcoming Techtextil show in Frankfurt from April 23-26.展开更多
The global textile market was valued at USD 1,69513 billion in 2023 and is anticipated to grow at a compound annual growth rate (CAGR) of 7.6%in revenue from 2024 to 2030.The ever-increasing apparel demand from the fa...The global textile market was valued at USD 1,69513 billion in 2023 and is anticipated to grow at a compound annual growth rate (CAGR) of 7.6%in revenue from 2024 to 2030.The ever-increasing apparel demand from the fashion industry and the meteoric growth of e-commerce platforms are expected to drive market growth over the forecast period.The textile industry works on three major principles:designing,producing,and distributing different flexible materials such as yarn and clothing.Many processes,such as knitting,crocheting,weaving,and others,are primarily used to manufacture a wide range of finished and semi-finished goods in bedding,clothing,apparel,medical,and other accessories.展开更多
Huafang Co., Ltd. has become the leading textile company in China’s dyeing and finishing industry by virtue of its excellent quality of products and innovation. Facing the complicated and changing international situa...Huafang Co., Ltd. has become the leading textile company in China’s dyeing and finishing industry by virtue of its excellent quality of products and innovation. Facing the complicated and changing international situation and domestic economic pressure, the company shows resilient entrepreneurial spirit.展开更多
At the Techtextil show for technical textiles which take place in Frankfurt from April 23-25,Monforts launched its new coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating.For single-s...At the Techtextil show for technical textiles which take place in Frankfurt from April 23-25,Monforts launched its new coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating.For single-sided application with paste or foam,the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines,notably the industry-leading Montex stenter systems.展开更多
丹麦一男子不坐飞机环游世界且中途从未回国,经过10年的旅程后终于达成目标。1 Torbjorn Pedersen is a Danish trav-eler who recently finished a trip around the world.But this wasn't just any trip.Mr Pedersen spent nearly...丹麦一男子不坐飞机环游世界且中途从未回国,经过10年的旅程后终于达成目标。1 Torbjorn Pedersen is a Danish trav-eler who recently finished a trip around the world.But this wasn't just any trip.Mr Pedersen spent nearly 10 years visiting every country in the world without flying.展开更多
Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different fin...Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different finishing lines are used. These are shoulder, chamfer, and knife edge. Each with its comparative advantages and disadvantages. There is inadequate scientific evidence on which of these finishing lines will leave the most amount of residual dentine, after standard crown preparations on mandibular incisors and maxillary lateral incisors to preserve their pulpal health. Objective: To evaluate residual dentine thickness following various cervical finishing lines of anterior crown preparations for zirconia full coverage. Materials and Methods: A prospective comparative study was conducted from September 2<sup>nd</sup> to November 5<sup>th</sup>, 2022, using mandibular incisors and maxillary laterals extracted from individuals between ages 18 to 30. Each of the three groups of teeth was randomly divided into three cervical margin preparations as follows: Shoulder (n = 15), chamfer (n = 15), and knife edge (n = 15). The teeth were disinfected and stored in 10% formalin. Silicone impressions followed by crown preparations were done on teeth mounted on phantom head manikins. The teeth were sectioned 0.5 mm coronal to the cemento-enamel junction using a separating disc and the mesial, distal, buccal, and lingual thickness were measured using a digital caliper. ANOVA analysis was applied to assess the difference in mean residual dentine thickness among the finishing lines and the Tukey test used for mean comparison. Results: Knife edge finishing lines had 2.05 mm of residual dentine thickness, for upper lateral incisors lingually and had an amount of 1.55 mm and 1.47 mm for lower central teeth mesially and distally respectively. Shoulder finishing lines had an amount of 0.58 mm for lower lateral incisors mesially. Interproximal areas had the least amounts of residual dentine for shoulder and chamfer finishing lines of 0.58 mm and 0.78 mm respectively. Conclusions: There was a significant statistical difference in the thickness of residual dentine at the various cervical finishing line margins. The knife edge finishing line was protective enough for zirconia crown preparations.展开更多
Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists re...Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists regarding which of these finishing lines will leave the most amount of residual dentine coronally on maxillary lateral incisors and mandibular incisors. Objective: To assess the coronal residual dentine thickness after different cervical finishing lines for anterior crown preparations. Materials and Methods: A prospective comparative study was conducted including mandibular incisors and maxillary laterals that were taken from subjects from 18 to 30 years old. Teeth in each of the three groups were randomly separated into three cervical margin preparation groups: knife edge, chamfer and shoulder. The teeth were then prepared for single crown coverage using these finishing lines. The teeth were sectioned halfway through the crown preparation, and a digital caliper was used to determine the residual dentine thickness at the buccal, lingual, mesial and distal areas. The Tukey test was used for mean comparison, and ANOVA analysis was used to evaluate the variation in mean residual dentine thickness. Results: For upper lateral incisors, knife edge finishing lines showed the highest amount of remaining dentine thickness—1.5 mm. lingually, while the upper lateral incisors mesially had the least amount of 0.53 mm for shoulder finishing lines. The least residual dentine (0.53 mm for the shoulder and 0.70 mm for the chamfer finishing line) was found in the interproximal portions of all the teeth that were selected. Lower central incisors had the least amount of residual dentine 0.61 mm for shoulder preparations mesially whiles lower lateral incisors had the least amount of residual dentine for shoulder preparations 0.58 mm distally. There was a statistically significant difference of 0.001 across the groups. Conclusion: The thickness of residual dentine seen coronally after the three finishing line preparations showed a statistically significant difference and the knife edge finishing line provided enough coronal protection within the scope of this study.展开更多
Denim is widely accepted among exported textile products due to its aesthetics, appearance, and fashion. Practitioners employed several physical or chemical treatments to improve denim qualities in denim finishing ope...Denim is widely accepted among exported textile products due to its aesthetics, appearance, and fashion. Practitioners employed several physical or chemical treatments to improve denim qualities in denim finishing operations. So, several treatment processes, including enzymatic, bleaching, singeing, heat set, and ozone finish, are used, which made this processing more energy consumption and time-consuming. Therefore, it is significant to investigate how changing the chemicals and raw ingredients could improve the finishing process, which is environmentally and economically beneficial for sustainable production practices in the denim finishing process. This study’s research design comprises an experimental investigation in a denim plant in Bangladesh. Two different fabrics were chosen to analyze, determining the potential savings of finishing on the denim fabrics’ performance characteristics. By deducting singeing and heat-set processes, the researchers ran an experimental process by maintaining the same length of fabric. Then, the impacts of finishing process optimization on the mechanical, thermal, and comfort parameters of drape, stiffness, and tear strength were examined. The study’s findings demonstrated that this experiment increased productivity and reduced the finishing unit’s energy consumption without compromising the denim fabrics’ quality. This study significantly impacts environmental sustainability by preserving limited energy resources and manufacturing denim finishing processes.展开更多
After China finished building a moderately prosperous society in all respects,thus completing the First Centenary Goal,it went on toward the Second Centenary Goal of building a great modern socialist country in ...After China finished building a moderately prosperous society in all respects,thus completing the First Centenary Goal,it went on toward the Second Centenary Goal of building a great modern socialist country in all respects.This transition has led to accelerated efforts to advance Chinese modernization in the agricultural sector and rural areas.Rural development is of vital importance for the realization of China’s Second Centenary Goal,and has drawn broad attention globally.展开更多
My life has changed a lot in the last few years.Firstly,I used to be short and heavy.But now I'm tall and thin.I think that's because I've been eating more vegetables and fruit.Secondly,I used to be afraid...My life has changed a lot in the last few years.Firstly,I used to be short and heavy.But now I'm tall and thin.I think that's because I've been eating more vegetables and fruit.Secondly,I used to be afraid of darkness.But now I'm brave enough to go home alone at night.However,the biggest change in my life is that I have fallen in love with books.The book which inspired me most was Pride and Prejudice.Since I finished reading the book,I have been reading books every day.Books enrich my life.展开更多
文摘Batik fabric is an integral part of the traditional cloth culture of the Ghanaian traditional setting. However, the batik fabric has marginal usage due to its casual visual appearance. This studio practice seeks to explore the epiphanic revival in the use of metallic finishes on batik substrate to create an enhanced visual appearance with embellished aesthetic sensibilities and diversified use. The researchers adopted the studio-based approach of the qualitative design to manipulate handmade tools, techniques (collagraph) and the batik fabrics through experimentation to produce a glittering mercurial batik fabric which is typically an industrial practice. The studio practice took place at the Textile Design and Technology studio, Takoradi Technical University, Ghana. The traditional batik fabric was manipulated through fabric decoration techniques in accordance with studio-based practices. The Addie model was adopted as a methodological approach in the analysis, design, development, implementation, and evaluation processes of the experimentation processes of the study. Findings revealed that the hand techniques used in the production process for the metallic prints produced interesting accidentals finishes and effects that machine work cannot achieve, producing new discoveries of visual enhancements of traditional batik fabric. Traditional batiks became mercurial with glittery effects. The metallic prints on the fabric also changed its consumption pattern from mere casual fabric to classic and cosmopolitan fabric for varied uses suitable for wearable to non-wearable.
文摘After more than five years of construction,the world’s biggest single-dish radio telescope was finally ready to open its eye.On September 25,2016,the Fivehundred-meter Aperture Spherical radio Telescope(FAST)was officially put into use in a mountainous region of southwest China's Guizhou Province.With a total collecting area equivalent to the size of 30 soccer fields,FAST is expected to accomplish large scale
文摘The primariy application of rare - earth spin finishes on PET/PA composite super - fine denier fiber has been studied in this paper. It results in the improvement of fi-ber’s properties, such as increased whiteness, brightness and brilliance, effective and uniform spliting of compos-ite fiber into super - fine denier fiber and enhanced dye-ing effect.
文摘The results of an investigation into the effects of various finishing processes on the propertiesof cotton rich mans shirting fabrics are presented and discussed.The KES-FB system was used forthe testing of fabric mechanical properties.It is concluded that mercerising cotton rich fabrics is nota cost effective finish process while the optimisation of the bleaching process may bring more bene-fit.The investigation is part of a long term program aimed at the development of an expert systemfor total fabric engineering.
文摘This study demonstrated that the changes in functional properties of both woven and knit cotton fabrics were determined to evaluate the performance of different special finishes. Here, 100% cotton fabrics were treated with different types of finishing chemicals at different formulations. To assess the performance of different finishes on fabric properties, GSM, bursting strength, tensile strength, dimensional stability, absorbency, crease recovery angle with ASTM and AATCC methods were done. The results showed that the functional properties of the finished cotton fabrics both woven and knit depend to a great extent on the type of finish.
文摘This study demonstrated that the variation in physical and chemical performance on cotton double jersey knit fabrics was decided by the knit structure, water repellent chemicals types and their concentration. Here, two types of double jersey fabrics were treated with different types of water repellent chemicals at different formulations to evaluate the performance of water repellent finishes on knit fabrics properties. The levels of water repellency of the fabrics were assessed by AATCC 127 hydrostatic head test method and by ISO 4920:2012 spray rating test method. To evaluate the performance of water repellent finishes on knit fabric properties, GSM, bursting strength test according to ASTM (D 3786-87) method, air permeability, color fastness to wash, water, perspiration, chlorinated water and color fastness to rubbing with ISO method were done. The results showed that both physical and chemical properties of the finished cotton knits, depend to a great extent on knit structure, the water repellent finish type and concentration to obtain water repellent fabrics with desirable properties.
基金the National Key Research and Development Program of China under Grant 2021YFB3301300the National Natural Science Foundation of China under Grant 62203213+1 种基金the Natural Science Foundation of Jiangsu Province under Grant BK20220332the Open Project Program of Fujian Provincial Key Laboratory of Intelligent Identification and Control of Complex Dynamic System under Grant 2022A0004.
文摘The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.
文摘A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.
基金National Key Research and Development Program of China(2017YFB0308602)Key Scientific Research Group of Shaanxi province(2013KCT-08)+1 种基金Young Talent Lifts Planning Project of Shaanxi Provicial University Science Association(20180416)Scientific Research Innovation Team Building Project of Shaanxi University of Science and Technology(TD12-03).
文摘Nowadays,the increasing demands from consumer challenges the traditional leather products.Traditional polymer leather finishes gradually lose their dominant position in the market.To address this issue,recent research effort has been devoted to developing polymer-based organic-inorganic nanocomposite leather finishes due to their various functional properties including antibacterial,self-cleaning and water-resistant property.In this review,we provide a comprehensive overview of synthesis of polymer-based organic-inorganic nanocomposites and their application as functional leather finishes.With the perspective of their properties and current challenges,an outlook in the future development about crafting functional and high-quality leather finishes are further proposed.
文摘After an intensive few years of development,ACG Kinna Automatic and ACG Nystrom–members of TMAS,the Swedish textile machinery association–have delivered the first microfactory for the production of fully finished filter bags to a major international filtration industry customer,in cooperation with JUKI Central Europe.
文摘Monforts–which celebrates its 140th anniversary this year–continues to lead the field in finishing and coating technologies for technical textiles.The company is looking forward to many fruitful discussions on the scope of existing and new processes and applications at the forthcoming Techtextil show in Frankfurt from April 23-26.
文摘The global textile market was valued at USD 1,69513 billion in 2023 and is anticipated to grow at a compound annual growth rate (CAGR) of 7.6%in revenue from 2024 to 2030.The ever-increasing apparel demand from the fashion industry and the meteoric growth of e-commerce platforms are expected to drive market growth over the forecast period.The textile industry works on three major principles:designing,producing,and distributing different flexible materials such as yarn and clothing.Many processes,such as knitting,crocheting,weaving,and others,are primarily used to manufacture a wide range of finished and semi-finished goods in bedding,clothing,apparel,medical,and other accessories.
文摘Huafang Co., Ltd. has become the leading textile company in China’s dyeing and finishing industry by virtue of its excellent quality of products and innovation. Facing the complicated and changing international situation and domestic economic pressure, the company shows resilient entrepreneurial spirit.
文摘At the Techtextil show for technical textiles which take place in Frankfurt from April 23-25,Monforts launched its new coaTTex coating unit exclusively dedicated to air knife and knife-over-roller coating.For single-sided application with paste or foam,the versatile coaTTex is suitable for both incorporation into existing finishing ranges as well as installation with new Monforts lines,notably the industry-leading Montex stenter systems.
文摘丹麦一男子不坐飞机环游世界且中途从未回国,经过10年的旅程后终于达成目标。1 Torbjorn Pedersen is a Danish trav-eler who recently finished a trip around the world.But this wasn't just any trip.Mr Pedersen spent nearly 10 years visiting every country in the world without flying.
文摘Background: A reduced residual dentine thickness following crown preparation has a conceivable impact on pulp degeneration by increasing the pulp’s susceptibility to injury. In crown preparations, three different finishing lines are used. These are shoulder, chamfer, and knife edge. Each with its comparative advantages and disadvantages. There is inadequate scientific evidence on which of these finishing lines will leave the most amount of residual dentine, after standard crown preparations on mandibular incisors and maxillary lateral incisors to preserve their pulpal health. Objective: To evaluate residual dentine thickness following various cervical finishing lines of anterior crown preparations for zirconia full coverage. Materials and Methods: A prospective comparative study was conducted from September 2<sup>nd</sup> to November 5<sup>th</sup>, 2022, using mandibular incisors and maxillary laterals extracted from individuals between ages 18 to 30. Each of the three groups of teeth was randomly divided into three cervical margin preparations as follows: Shoulder (n = 15), chamfer (n = 15), and knife edge (n = 15). The teeth were disinfected and stored in 10% formalin. Silicone impressions followed by crown preparations were done on teeth mounted on phantom head manikins. The teeth were sectioned 0.5 mm coronal to the cemento-enamel junction using a separating disc and the mesial, distal, buccal, and lingual thickness were measured using a digital caliper. ANOVA analysis was applied to assess the difference in mean residual dentine thickness among the finishing lines and the Tukey test used for mean comparison. Results: Knife edge finishing lines had 2.05 mm of residual dentine thickness, for upper lateral incisors lingually and had an amount of 1.55 mm and 1.47 mm for lower central teeth mesially and distally respectively. Shoulder finishing lines had an amount of 0.58 mm for lower lateral incisors mesially. Interproximal areas had the least amounts of residual dentine for shoulder and chamfer finishing lines of 0.58 mm and 0.78 mm respectively. Conclusions: There was a significant statistical difference in the thickness of residual dentine at the various cervical finishing line margins. The knife edge finishing line was protective enough for zirconia crown preparations.
文摘Background: Knife edge, chamfer, and shoulder are the three distinct finishing lines utilized in crown preparations. Each finishing line has relative benefits and drawbacks. However, not much scientific data exists regarding which of these finishing lines will leave the most amount of residual dentine coronally on maxillary lateral incisors and mandibular incisors. Objective: To assess the coronal residual dentine thickness after different cervical finishing lines for anterior crown preparations. Materials and Methods: A prospective comparative study was conducted including mandibular incisors and maxillary laterals that were taken from subjects from 18 to 30 years old. Teeth in each of the three groups were randomly separated into three cervical margin preparation groups: knife edge, chamfer and shoulder. The teeth were then prepared for single crown coverage using these finishing lines. The teeth were sectioned halfway through the crown preparation, and a digital caliper was used to determine the residual dentine thickness at the buccal, lingual, mesial and distal areas. The Tukey test was used for mean comparison, and ANOVA analysis was used to evaluate the variation in mean residual dentine thickness. Results: For upper lateral incisors, knife edge finishing lines showed the highest amount of remaining dentine thickness—1.5 mm. lingually, while the upper lateral incisors mesially had the least amount of 0.53 mm for shoulder finishing lines. The least residual dentine (0.53 mm for the shoulder and 0.70 mm for the chamfer finishing line) was found in the interproximal portions of all the teeth that were selected. Lower central incisors had the least amount of residual dentine 0.61 mm for shoulder preparations mesially whiles lower lateral incisors had the least amount of residual dentine for shoulder preparations 0.58 mm distally. There was a statistically significant difference of 0.001 across the groups. Conclusion: The thickness of residual dentine seen coronally after the three finishing line preparations showed a statistically significant difference and the knife edge finishing line provided enough coronal protection within the scope of this study.
文摘Denim is widely accepted among exported textile products due to its aesthetics, appearance, and fashion. Practitioners employed several physical or chemical treatments to improve denim qualities in denim finishing operations. So, several treatment processes, including enzymatic, bleaching, singeing, heat set, and ozone finish, are used, which made this processing more energy consumption and time-consuming. Therefore, it is significant to investigate how changing the chemicals and raw ingredients could improve the finishing process, which is environmentally and economically beneficial for sustainable production practices in the denim finishing process. This study’s research design comprises an experimental investigation in a denim plant in Bangladesh. Two different fabrics were chosen to analyze, determining the potential savings of finishing on the denim fabrics’ performance characteristics. By deducting singeing and heat-set processes, the researchers ran an experimental process by maintaining the same length of fabric. Then, the impacts of finishing process optimization on the mechanical, thermal, and comfort parameters of drape, stiffness, and tear strength were examined. The study’s findings demonstrated that this experiment increased productivity and reduced the finishing unit’s energy consumption without compromising the denim fabrics’ quality. This study significantly impacts environmental sustainability by preserving limited energy resources and manufacturing denim finishing processes.
文摘After China finished building a moderately prosperous society in all respects,thus completing the First Centenary Goal,it went on toward the Second Centenary Goal of building a great modern socialist country in all respects.This transition has led to accelerated efforts to advance Chinese modernization in the agricultural sector and rural areas.Rural development is of vital importance for the realization of China’s Second Centenary Goal,and has drawn broad attention globally.
文摘My life has changed a lot in the last few years.Firstly,I used to be short and heavy.But now I'm tall and thin.I think that's because I've been eating more vegetables and fruit.Secondly,I used to be afraid of darkness.But now I'm brave enough to go home alone at night.However,the biggest change in my life is that I have fallen in love with books.The book which inspired me most was Pride and Prejudice.Since I finished reading the book,I have been reading books every day.Books enrich my life.