Effect of Types and Orders of Electromagnetic Field Finite Element Meshes on Power Communication Harmonic Parameters Calculation Results of Tubular Hydrogenerators

In generator design field,waveform total harmonic distortion(THD)and telephone harmonic factor(THF)are parameters commonly used to measure the impact of generator no-load voltage harmonics on the power communication quality.Tubular hydrogenerators are considered the optimal generator for exploiting low-head,high-flow hydro resources,and they have seen increasingly widespread application in China's power systems recent years.However,owing to the compact and constrained internal space of such generators,their internal magnetic-field harmonics are pronounced.Therefore,accurate calculation of their THD and THF is crucial during the analysis and design stages to ensure the quality of power communication.Especially in the electromagnetic field finite element modeling analysis of such generators,the type and order of the finite element meshes may have a significant impact on the THD and THF calculation results,which warrants in-depth research.To address this,this study takes a real 34 MW large tubular hydrogenerator as an example,and establishes its electromagnetic field finite element model under no-load conditions.Two types of meshes,five mesh densities,and two mesh orders are analyzed to reveal the effect of electromagnetic field finite element mesh types and orders on the calculation results of THD and THF for such generators.

A Unified Dimensionless Parameter for Finite Element Mesh for Beams Resting on Elastic Foundation

Discretising a structure into elements is a key step in finite element(FE)analysis.The discretised geometry used to formulate an FE model can greatly affect accuracy and validity.This paper presents a unified dimensionless parameter to generate a mesh of cubic FEs for the analysis of very long beams resting on an elastic foundation.A uniform beam resting on elastic foundation with various values of flexural stiffness and elastic supporting coefficients subject to static load and moving load is used to illustrate the application of the proposed parameter.The numerical results show that(a)Even if the values of the flexural stiffness of the beam and elastic supporting coefficient of the elastic foundation are different,the same proposed parameter“s”can ensure the same accuracy of the FE solution,but the accuracy may differ for use of the same element length;(b)The proposed dimensionless parameter“s”can indeed be used as a unified index to generate the mesh for a beam resting on elastic foundation,whereas the use of the same element length as a criterion may be misleading;(c)The errors between the FE and analytical solutions for the maximum vertical displacement,shear force and bending moment of the beam increase with the dimensionless parameter“s”;and(d)For the given allowable errors for the vertical displacement,shear force and bending moment of the beam under static load and moving load,the corresponding values of the proposed parameter are provided to guide the mesh generation.

Mapping-Based 3D Hexahedral Finite Element Mesh Generation Method

Mapping mesh generation is widely applied in pre-processes of Finite Element Method （FEM）. In this study, the basic 3D mapping equations by Lagrange interpolating function are founded. Based these equations, a mapping pattern library, which maps essential configurations e.g. line, circle, rotary body, sphere etc. to hexahedral FEM mesh, has been built. Then available FEM mesh will be generated by clipping and assembling the mapped essential objects. Study case illustrates that the proposed method is simple and efficient to generate valid FEM mesh for complex 3D engineering structure.

THREE-DIMENSIONAL FINITE ELEMENT DELAUNAY MESH GENERATION BY A PERFECTED NODE CONNECTION METHOD

How to automatically generate three-dimensional finite element Delaunay mesh by a peifected node connection method is introduced, where nodes are generated based on existing elements, instead of independence of node creation and elements generation in traditional node connection method. Therefore, Ihe the difficulty about how to automatically create nodes in the traditional method is overcome.

AN h-TYPE ADAPTIVE FINITE ELEMENT

For h-lype adaptive finite element method, the local mesh refinement introduces irregular nodes and destroys the standard continuity between elements. The reference nodes of the irregular are used to interpolate element coordinates and displacements.The improved shape functions, of which the conventional shape functions. are a particular case, are presented to guarantee the continuity, No changes but the shape functions are needed when the mcthod is applied in finite element programs.the computational results the features of the method.higher accuracy,simplicity.fewer degrees of freedom and less computation effort.

PHYSICAL VALUE MAPPING ALGORITHM OF MESH IN FINE CAE ANALYSIS OF AUTOMOBILE BODY STRUCTURE

A physical value mapping （PVM） algorithm based on finite element mesh from the stamped part in stamping process to the product is presented, In order to improve the efficiency of the PVM algorithm, a search way from the mesh of the product to the mesh of the stamped part will be adopted. At the same time, the search process is divided into two steps： entire search （ES） and local search （LS）, which improve the searching efficiency. The searching area is enlarged to avoid missing projection elements in ES process. An arc-length method is introduced in LS process. The validity is confirmed by the results of the complex industry-forming product.

METHOD FOR ADAPTIVE MESH GENERATION BASED ON GEOMETRICAL FEATURES OF 3D SOLID

In order to provide a guidance to specify the element size dynamically during adaptive finite element mesh generation, adaptive criteria are firstly defined according to the relationships between the geometrical features and the elements of 3D solid. Various modes based on different datum geometrical elements, such as vertex, curve, surface, and so on, are then designed for generating local refined mesh. With the guidance of the defmed criteria, different modes are automatically selected to apply on the appropriate datum objects to program the element size in the local special areas. As a result, the control information of element size is successfully programmed covering the entire domain based on the geometrical features of 3D solid. A new algorithm based on Delatmay triangulation is then developed for generating 3D adaptive finite element mesh, in which the element size is dynamically specified to catch the geometrical features and suitable tetrahedron facets are selected to locate interior nodes continuously. As a result, adaptive mesh with good-quality elements is generated. Examples show that the proposed method can be successfully applied to adaptive finite element mesh automatic generation based on the geometrical features of 3D solid.

GENERATION OF FINITE ELEMENT MESH WITH CYCLONE TRACK IN THE AUSTRALIANNORTH WEST SHELF

In the peper, two approaches to enhance the computational accuracy and predictive capacity for current three-dimensional modelling of the response of shallow coastal waters to tropical cyclones have been analysed. Along the second approach, the mesh generation details of finite element methods for a complex domain with both the coastline and the path of landfall cyclone Orson in the Australian North West Shelf has been presented. The generated triangular element mesh could be taken as either the main mesh for depth-averaged modelling or the mesh of sea-surface elevation for three-dimensional modelling of the ocean response to the tropic cyclone.

Combined Size and Shape Optimization of Structures with DOE,RSM and GA

In this paper,size and shape optimization problem of a machine gun system is addressed with an efficient hybrid method,in which a novel and flexible mesh morphing technique is employed to achieve fast parameterization and modification of complexity structure without going back to CAD for reconstruction of geometric models or to finite element analysis（ FEA） for remodeling. Design of experiments（ DOE） and response surface method（ RSM） are applied to approximate the constitutive parameters of a machine gun system based on experimental tests. Further FEA,secondary development technique and genetic algorithm（ GA） are introduced to find all the optimal solutions in one go and the optimal design of the demonstrated machine gun system is obtained. Results of the rigid-flexible coupling dynamic analysis and exterior ballistics calculation validate the proposed methodology,which is relatively time-saving,reliable and has the potential to solve similar problems.

Study on the computation method of temperature field of RCC dam

According to the construction characteristic of RCC dam cast by layers, three-dimensional finite element relocating mesh method is developed to simulate construction process and compute temperature field. The computation model of relocating mesh method is expatiated in detail; based on the thermodynamic properties of RCC materials, the feasibility and error of relocating mesh method are analyzed and demonstrated; The computation results in this article are verified by means of the temperature observation data of certain RCC gravity dam. The results show that the temperature field computed by three-dimensional finite element relocating mesh method can not only ensure the computation precision, but also improve the calculation efficiency greatly. This provides an effective method for simulating construction process and computing temperature field of RCC dam.

Discussion and study on contraction joints for RCC gravity dam

Based on the construction property of rolled compacted concrete, three-dimensional finite element relocating mesh method was developed in simulating construction process and computing temperature and stress field. Using this method, the temperature and the thermal stress fields developed in the RCC gravity dam of the Longtan project with or without a longitudinal joint during construction and operation are calculated so as to simulate the construction process. The computation results show that the value of the thermal stresses developed in the dam even, without any longitudinal joint, could meet the design criteria provided the placement temperature is adequately controlled.

A New Approach to Fully Automatic Mesh Generation

Automatic mesh generation is one of the most important parts in CIMS (Computer Integrated Manufacturing System). A method based on mesh grad-ing propagation which automatically produces a triangular mesh in a multiply connected planar region is presented in this paper. The method decomposes the planar region into convex subregions, using algorithms which run in linear time. For every subregion, an algorithm is used to generate shrinking polygons according to boundary gradings and form Delaunay triangulation between two adjacent shrinking polygons, both in linear time. It automatically propagates boundary gradings into the interior of the region and produces satisfactory quasi-uniform mesh.