With the aim of studying the anti-rutting performance of Thiopave modified asphalt mixture applied to the upper layer of pavement, the strain-hardening creep model in ABAQUS finite element software was used to analyze...With the aim of studying the anti-rutting performance of Thiopave modified asphalt mixture applied to the upper layer of pavement, the strain-hardening creep model in ABAQUS finite element software was used to analyze the rutting under the condition of introducing temperature field. Compared with the calculation results of the rutting of ordinary asphalt pavement, it is found that Thiopave can improve the temperature sensitivity of asphalt mixture. With the increase of temperature, the rutting change of Thiopave modified asphalt pavement is smaller than that of ordinary asphalt. Thiopave also has a certain degree of improvement in the fatigue resistance of asphalt pavements, which can be applied to sections with high traffic volume in high temperature areas.展开更多
A set of four in-vessel saddle coils was designed to generate a helical field on the J- TEXT tokamak to study the influences of the external perturbation field on plasma. The coils are fed with alternating current up ...A set of four in-vessel saddle coils was designed to generate a helical field on the J- TEXT tokamak to study the influences of the external perturbation field on plasma. The coils are fed with alternating current up to 10 kA at frequency up to 10 kHz. Due to the special structure, complex thermal environment and limited space in the vacuum chamber, Jt is very important to make sure that the coils will not be damaged when undergoing the huge electromagnetic forces in the strong toroidal field, and that their temperatures don＇t rise too much and destroy the in- sulation. A 3D finite element model is developed in this paper using the ANSYS code, stresses are analyzed to find the worst condition, and a mounting method is then established. The results of the stress and modal analyses show that the mounting method meets the strength requirements. Finally, a thermal analysis is performed to study the cooling process and the temperature distribution of the coils.展开更多
In this paper we first prove a theorem on the nonexistence of pyramidal polynomial basis functions.Then we present a new symmetric composite pyramidal finite element which yields a better convergence than the nonsymm...In this paper we first prove a theorem on the nonexistence of pyramidal polynomial basis functions.Then we present a new symmetric composite pyramidal finite element which yields a better convergence than the nonsymmetric one.It has fourteen degrees of freedom and its basis functions are incomplete piecewise triquadratic polynomials.The space of ansatz functions contains all quadratic functions on each of four subtetrahedra that form a given pyramidal element.展开更多
Initiation and propagation of cracks in rotating disks may cause catastrophic failures. Therefore, determination of fracture parameters under different working con- ditions is an essential issue. In this paper, a comp...Initiation and propagation of cracks in rotating disks may cause catastrophic failures. Therefore, determination of fracture parameters under different working con- ditions is an essential issue. In this paper, a comprehensive study of stress intensity factors （SIFs） in rotating disks containing three-dimensional （3D） semi-elliptical cracks subjected to different working conditions is carried out. The effects of mechanical prop- erties, rotational velocity, and orientation of cracks on SIFs in rotating disks under cen- trifugal loading are investigated. Also, the effects of using composite patches to reduce SIFs in rotating disks are studied. The effects of patching design variables such as mechanical properties, thickness, and ply angle are investigated separately. The modeling and analytical procedure are verified in comparison with previously reported results in the literature.展开更多
The effect of revolution on inhomogeneous plastic deformation of HPT processed IF steel was investigated using experimental and simulation approaches. The results indicate that the degree of inhomogeneous plastic defo...The effect of revolution on inhomogeneous plastic deformation of HPT processed IF steel was investigated using experimental and simulation approaches. The results indicate that the degree of inhomogeneous plastic deformation increases as the revolutions increase along the radial direction on the transversal plane of disks. In addition, the hardness and the microstructure distributions verify the trend that the effective strain of the HPT processed disks at the early torsion stage is gradually deformed from the edge to the center with the revolutions increases.展开更多
文摘With the aim of studying the anti-rutting performance of Thiopave modified asphalt mixture applied to the upper layer of pavement, the strain-hardening creep model in ABAQUS finite element software was used to analyze the rutting under the condition of introducing temperature field. Compared with the calculation results of the rutting of ordinary asphalt pavement, it is found that Thiopave can improve the temperature sensitivity of asphalt mixture. With the increase of temperature, the rutting change of Thiopave modified asphalt pavement is smaller than that of ordinary asphalt. Thiopave also has a certain degree of improvement in the fatigue resistance of asphalt pavements, which can be applied to sections with high traffic volume in high temperature areas.
基金supported by the ITER Project Funds of China (No.2010GB107004)National Natural Science Funds of China (No.50907029)
文摘A set of four in-vessel saddle coils was designed to generate a helical field on the J- TEXT tokamak to study the influences of the external perturbation field on plasma. The coils are fed with alternating current up to 10 kA at frequency up to 10 kHz. Due to the special structure, complex thermal environment and limited space in the vacuum chamber, Jt is very important to make sure that the coils will not be damaged when undergoing the huge electromagnetic forces in the strong toroidal field, and that their temperatures don＇t rise too much and destroy the in- sulation. A 3D finite element model is developed in this paper using the ANSYS code, stresses are analyzed to find the worst condition, and a mounting method is then established. The results of the stress and modal analyses show that the mounting method meets the strength requirements. Finally, a thermal analysis is performed to study the cooling process and the temperature distribution of the coils.
基金The Natural Sciences and Engineering Research Council of Canada,the grant No.IAA 100190803the Grant Agency of the Academy of Sciences of the Czech Republic and the Institutional Research Plan No.AV0Z 10190503。
文摘In this paper we first prove a theorem on the nonexistence of pyramidal polynomial basis functions.Then we present a new symmetric composite pyramidal finite element which yields a better convergence than the nonsymmetric one.It has fourteen degrees of freedom and its basis functions are incomplete piecewise triquadratic polynomials.The space of ansatz functions contains all quadratic functions on each of four subtetrahedra that form a given pyramidal element.
文摘Initiation and propagation of cracks in rotating disks may cause catastrophic failures. Therefore, determination of fracture parameters under different working con- ditions is an essential issue. In this paper, a comprehensive study of stress intensity factors （SIFs） in rotating disks containing three-dimensional （3D） semi-elliptical cracks subjected to different working conditions is carried out. The effects of mechanical prop- erties, rotational velocity, and orientation of cracks on SIFs in rotating disks under cen- trifugal loading are investigated. Also, the effects of using composite patches to reduce SIFs in rotating disks are studied. The effects of patching design variables such as mechanical properties, thickness, and ply angle are investigated separately. The modeling and analytical procedure are verified in comparison with previously reported results in the literature.
文摘The effect of revolution on inhomogeneous plastic deformation of HPT processed IF steel was investigated using experimental and simulation approaches. The results indicate that the degree of inhomogeneous plastic deformation increases as the revolutions increase along the radial direction on the transversal plane of disks. In addition, the hardness and the microstructure distributions verify the trend that the effective strain of the HPT processed disks at the early torsion stage is gradually deformed from the edge to the center with the revolutions increases.
