Thermal stresses around a circular inclusion with functionally graded interphase in a finite matrix

Based on the theory of the complex variable functions, the analysis of non-axisymmetric thermal stresses in a finite matrix containing a circular inclusion with functionally graded interphase is presented by means of the least square boundary collocation technique. The distribution of thermal stress for the functionally graded interphase layer with arbitrary radial material parameters is derived by using the method of piece-wise homogeneous layers when the finite matrix is subjected to uniform heat flow. The effects of matrix size, interphase thickness and compositional gradient on the interfacial thermal stress are discussed in detail. Numerical results show that the magnitude and distribution of interfacial thermal stress in the inclusion and matrix can be designed properly by controlling these parameters.

THE DYNAMIC STIFFNESS MATRIX OF THE FINITE ANNULAR PLATE ELEMENT

The dynamic deformation of harmonic vibration is used as the shape functions of the finite annular plate element, and sonic integration difficulties related to the Bessel's functions are solved in this paper. Then the dynamic stiffness matrix of the finite annular plate element is established in closed form and checked by the direct stiffness method. The paper has given wide convcrage for decomposing the dynamic matrix into the power series of frequency square. By utilizing the axial symmetry of annular elements, the modes with different numbers of nodal diameters at s separately treated. Thus some terse and complete results are obtained as the foundation of structural characteristic analysis and dynamic response compulation.

Radiation heat transfer model for complex superalloy turbine blade in directional solidification process based on finite element method

For the sake of a more accurate shell boundary and calculation of radiation heat transfer in the Directional Solidification(DS) process, a radiation heat transfer model based on the Finite Element Method(FEM)is developed in this study. Key technologies, such as distinguishing boundaries automatically, local matrix and lumped heat capacity matrix, are also stated. In order to analyze the effect of withdrawing rate on DS process,the solidification processes of a complex superalloy turbine blade in the High Rate Solidification(HRS) process with different withdrawing rates are simulated; and by comparing the simulation results, it is found that the most suitable withdrawing rate is determined to be 5.0 mm·min^(-1). Finally, the accuracy and reliability of the radiation heat transfer model are verified, because of the accordance of simulation results with practical process.

Practical Green’s function for the thermal stress field induced by a heat source in plane thermoelasticity

The classical Green’s functions used in the literature for a heat source in a homogeneous elastic medium cannot lead to ?nite remote thermal stresses in the medium,so that they may not work well in practical thermal stress analyses. In this paper, we develop a practical Green’s function for a heat source disposed eccentrically into an elastic disk/cylinder subject to plane deformation. The edge of the disk/cylinder is assumed to be thermally permeable and traction-free. The full thermal stress ?eld induced by the heat source in the disk/cylinder is determined exactly and explicitly via the Cauchy integral techniques. In particular, a very simple formula is obtained to describe the hoop thermal stress on the edge of the disk/cylinder, which may be conveniently useful for analyzing the thermal stresses in microelectronic components.

A SPLIT-CHARACTERISTIC FINITE ELEMENT MODEL FOR 1-D UNSTEADY FLOWS

An efficient and accurate solution algorithm was proposed for 1-D unsteady flow problems widely existing in hydraulic engineering. Based on the split-characteristic finite element method, the numerical model with the Saint-Venant equations of 1-D unsteady flows was established. The assembled f＇mite element equations were solved with the tri-diagonal matrix algorithm. In the semi-implicit and explicit scheme, the critical time step of the method was dependent on the space step and flow velocity, not on the wave celerity. The method was used to eliminate the restriction due to the wave celerity for the computational analysis of unsteady open-channel flows. The model was verified by the experimental data and theoretical solution and also applied to the simulation of the flow in practical river networks. It shows that the numerical method has high efficiency and accuracy and can be used to simulate 1-D steady flows, and unsteady flows with shock waves or flood waves. Compared with other numerical methods, the algorithm of this method is simpler with higher accuracy, less dissipation, higher computation efficiency and less computer storage.

A simple compliance modeling method for flexure hinges

Various types of flexure hinges have been introduced and implemented in a variety of fields due to their superior performances.The Castigliano’s second theorem,the Euler–Bernoulli beam theory based direct integration method and the unit-load method have been employed to analytically describe the elastic behavior of flexure hinges.However,all these methods require prior-knowledge of the beam theory and need to execute laborious integration operations for each term of the compliance matrix,thus highly decreasing the modeling efficiency and blocking practical applications of the modeling methods.In this paper,a novel finite beam based matrix modeling(FBMM)method is proposed to numerically obtain compliance matrices of flexure hinges with various shapes.The main concept of the method is to treat flexure hinges as serial connections of finite micro-beams,and the shearing and torsion effects of the hinges are especially considered to enhance the modeling accuracy.By means of matrix calculations,complete compliance matrices of flexure hinges can be derived effectively in one calculation process.A large number of numerical calculations are conducted for various types of flexure hinges with different shapes,and the results are compared with the ones obtained by conventional modeling methods.It demonstrates that the proposed modeling method is not only efficient but also accurate,and it is a more universal and more robust tool for describing elastic behavior of flexure hinges.