Finite Control Set Model Predictive Current Control of a Five-Phase PMSM with Virtual Voltage Vectors and Adaptive Control Set

This paper presents an improved finite control set model predictive current control(FCS-MPCC)of a five-phase permanent magnet synchronous motor(PMSM).First,to avoid including all the 32 voltage vectors provided by a two-level five-phase inverter into the control set,virtual voltage vectors are adopted.As the third current harmonics can be much reduced by virtual voltage vectors automatically,the harmonic items in the cost function of conventional FCS-MPCC are not considered.Furthermore,an adaptive control set is proposed based on voltage prediction.Best control set with proper voltage vector amplitude corresponding to different rotor speed can be achieved by this method.Consequently,current ripples can be largely reduced and the system performs much better.At last,simulations are established to verify the steady and transient performance of the proposed FCS-MPCC,and experiments based on a 2 kW five-phase motor are carried out.The results have validated the performance improvement of the proposed control strategy.

MHD Equilibrium with Reversed Current Density and Magnetic Islands Revisited:the Vacuum Vector Potential Calculus

The solution of Grad-Shafranov equation determines the stationary behavior of fusion plasma inside a tokamak. To solve the equation it is necessary to know the toroidal current density profile. Recent works show that it is possible to determine a magnetohydrodynamic （MHD） equilibrium with reversed current density （RCD） profiles that presents magnetic islands. In this work we show analytical MHD equilibrium with a RCD profile and analyze the structure of the vacuum vector potential associated with these equilibria using the virtual casing principle.

A novel current vector decomposition controller design for six-phase permanent magnet synchronous motor

The vector control algorithm based on vector space decomposition （VSD） transformation method has a more flexible control freedom, which can control the fundamental and harmonic subspace separately. To this end, a current vector decoupling control algorithm for six-phase permanent magnet synchronous motor （PMSM） is designed. Using the proposed synchronous rotating coordinate transformation matrix, the fundamental and harmonic components in d-q subspace are changed into direct current （DC） component, only using the traditional proportional integral （PI） controller can meet the non-static difference adjustment, and the controller parameter design method is given by employing intemal model principle. In addition, in order to remove the 5th and 7th harmonic components of stator current, the current PI controller parallel with resonant controller is employed in x-y subspace to realize the specific harmonic component compensation. Simulation results verify the effectiveness of current decoupling vector controller.

Symbolic Computation and Graphic Presentation of Magneto-Static Field and Its Associated Vector Potential for a Steady Looping Current

With the advent of Computer Algebra System (CAS) such as Mathematica [1], challenging symbolic longhand calcula-tions can effectively be performed free of error and at ease. Mathematica’s integrated features allow the investigator to combine the needed symbolic, numeric and graphic modules all in one interactive environment. This assists the author to focus on interpreting the output rather than exerting the efforts of relating the scattered separate modules. In this note the author, utilizing these three features, explores the magneto-static field and its associated vector potential of a steady looping current. In particular by deploying the numeric features of Mathematica the exact value of the vector potential of the looping current conducive to its 3D graph is presented.

Study on the influence of the subsurface buoy＇s vibration on the vector sensor due to ocean current

Subsurface buoy systems,especially equipped with the vector sensor,have more and more extensive applications in military and civilian regions.However,their acoustic performances are constrained by the vibration resulting from the unavoidable ocean current in some degree.The influence of such vibrations is quantitatively analyzed by means of modeling the simplified models of two deployment configurations involving the positive buoyant buoy and neutral buoy system.The corresponding formulas are deduced respectively for the deployment configuration buoy systems in the motion state firstly.Then the simulation software is developed and some numerical simulations are put up via the Runge-Kutta method.The simulation results and theoretical analysis indicate that the neutral buoy will be an excellent design protocol in engineering application in comparison with the positive buoyant buoy.

Adaptive Hysteresis Current Vector Control of Synchronous Servo Drives with Different Tolerance Areas

Control methods of hysteresis current vector control of permanent magnet synchronous servo drive fed by voltage source inverter are examined. Detailed description of the control methods in stationary reference frame with circle, square and hexagon shape tolerance area using adaptive solutions is presented. The theoretical considerations are supported by simulation results.

Novel predictive model for metallic structure corrosion status in presence of stray current in DC mass transit systems

The novel method to analyze metallic structure corrosion status was proposed in the presence of stray current in DC mass transit systems. Firstly, the characteristic parameter and the influence parameters for the corrosion status were determined. Secondly, an experimental system was established for simulating the corrosion process within the stray current interference. Then, a predictive model for the corrosion status was built, using a support vector machine(SVM) method and experimental data. The data were divided into two sets, including training set and testing set. The training set was used to generate the SVM model and the testing set was used to evaluate the predictive performance of the SVM model. The results show that the relationship between the characteristic parameter and the influence parameters is nonlinear and the SVM model is suitable for predicting the corrosion status.

The Method Research and Technology Implementation of Eddy Current Hardness-sorting Based on LS-SVM

According to the practical problems in eddy current sorting,the method and technology of eddy current hardness sorting based on LeastSquaresSupportVectorMachine(LS-SVM)are proposed based on the Xilinx Artix-7 FPGA in this paper.The calculated sorting-hyperplane and designed sorting decision-making machine were used to sort different hardness of the vavles.The experimental results of the vavle sorting show that the sorting success rate can reach 100%under conditions that the number of test vavles is one quarter of the training vavles.The method and technology based on LS-SVM can solve the problems that the impedance feature value is nonlinear with the hardness value and variable sorting interval.It also proved that the LS-SVM algorithm has strong practical value in online eddy current sorting.

Generalization of the Second Order Vector Potential Formulation for Arbitrary Non-Orthogonal Curvilinear Coordinates Systems from the Covariant Form of Maxwell's Equations

A great number of semi-analytical models, notably the representation of electromagnetic fields by integral equations are based on the second order vector potential (SOVP) formalism which introduces two scalar potentials in order to obtain analytical expressions of the electromagnetic fields from the two potentials. However, the scalar decomposition is often known for canonical coordinate systems. This paper aims in introducing a specific SOVP formulation dedicated to arbitrary non-orthogonal curvilinear coordinates systems. The electromagnetic field representation which is derived in this paper constitutes the key stone for the development of semi-analytical models for solving some eddy currents moelling problems and electromagnetic radiation problems considering at least two homogeneous media separated by a rough interface. This SOVP formulation is derived from the tensor formalism and Maxwell’s equations written in a non-orthogonal coordinates system adapted to a surface characterized by a 2D arbitrary aperiodic profile.

Soft measurement model on torque of alternating current electrical dynamometer including copper loss and iron loss

Alternating current electrical dynamometer is a common device to measure the torque of engines, such as the gasoline engine. In order to solve the problems such as high cost, high energy consumption and complicated measurement system which exists in the direct measurement on the torque of alternating current electrical dynamometer, copper loss and iron loss are taken as two key factors and a soft-sensing model on the torque of alternating current electrical dynamometer is established using the fuzzy least square support vector machine (FLS-SVM). Then, the FLS-SVM parameters such as penalty factor and kernel parameter are optimized by adaptive genetic algorithm, torque soft-sensing is investigated in the alternating current electrical dynamometer, as well as the energy feedback efficiency and energy consumption during the measurement phase of a gasoline engine loading continual test is obtained. The results show that the minimum soft-sensing error of torque is about 0.0018, and it fluctuates within a range from -0.3 to 0.3 N·m. FLS-SVM soft-sensing method can increase by 1.6% power generation feedback compared with direct measurement, and it can save 500 kJ fuel consumption in the gasoline engine loading continual test. Therefore, the estimation accuracy of the soft measurement model on the torque of alternating current electrical dynamometer including copper loss and iron loss is high and this indirect measurement method can be feasible to reduce production cost of the alternating current electrical dynamometer and energy consumption during the torque measurement phase of a gasoline engine, replacing the direct method of torque measurement.

Some Explanation on Vector Diagram for Power System Analysis

The generating currents in the generator and the dissipating current at the load are completely different and they are out of phase.The magnitude of those currents is equal and the direction is opposite to each other.The resistive,inductive and capacitive loads dissipate completely different voltages which concern each of character of these loads.The direction of vectors of generated voltage and dissipated voltage must be drawn opposite to each other in the vector diagram.The vector of consumed voltage at the resistive load and the vector of the current through this load are in phase while the vector of generated voltage of the main source is out of phase.The resistive load consumes the voltage which is generated by the main source.The inductive load consumes the voltage which is induced or generated in the inductor caused by the inductance due to the current flow through the network.The vectors of consumed voltage at the inductive load and the vector of current through this load are in phase while the vector of generated voltage in the inductor caused by the inductance is out of phase.The capacitive load consumes the voltage which is generated at the capacitor caused by the capacitance due to the current flow through the network.The vector of consumed voltage at the capacitive load and the vectors of current through this load are in phase while the vector of generated voltage at the capacitor caused by the capacitance is out of phase.

Vector Control of Three-Phase Solar Farm Converters Based on Fictive-Axis Emulation

In this paper,a new method for adjusting the current of three-phase voltage source DC-AC converter in orthogonal(DQ)reference frame is presented.In the DQ reference system,AC variable appears in the constant form of DC,making the controller design the same as the DC-DC converter[1].It provides controllable gain benefits at the steady-state operating point,and finally realizes zero steady-state error[2].In addition,the creative analytical model is dedicated to building up a series of virtual quantities orthogonal to the actual single-phase system.In general,orthogonal imaginary numbers get the reference signal by delaying the real quantity by a quarter period.However,the introduction of such time delay makes the dynamic response of the system worse.In this paper,orthogonal quantities are generated from a virtual axis system parallel to the real axis,which can effectively improve the dynamic performance of traditional methods without increasing the complexity of controller structure.Through PSCAD simulation,the ideal experimental results are obtained.

计及采样扰动抑制的电压源逆变器三矢量无模型预测电流控制方法

针对传统电压源逆变器无模型预测电流控制(model-free predictive current control,MFPCC)方法存在电流纹波大、电流梯度更新停滞以及预测性能易受采样扰动影响的问题。该文提出一种计及采样扰动的三矢量MFPCC方法。在一个控制周期应用3个基本矢量,并根据价值函数计算矢量作用时间,降低了输出电流纹波;其次,通过建立不同矢量作用下的电流梯度方程组,实现电流梯度数据的实时更新,消除了停滞现象;再次,分析采样扰动对MFPCC的影响,采用扩张状态观测器估计采样扰动以补偿预测电流控制,抑制其对输出电流的影响。最后,通过仿真和实验,对所提方法的有效性进行了验证。

Research on Parallel Interleaved Inverters with Discontinuous Space-Vector Modulation

Parallel converter can significantly increase the capacity of the converter and improve the power quality of AC side, but the circulation which can lead to high switching loss and even damage the devices will easily exist in the direct parallel converters. In this paper, the average model of parallel interleaved inverters system to analyze the circulation current is shown, and the cross current is relevant to DC-bus voltage and the overlap time of zero vectors in the switching period. Based on this observation, a discontinuous space vector modulation without using zero vectors (000) is eliminate and suppress the zero-sequence current to entire system. Finally, the effectiveness of modulation strategy is verified by the simulations in this paper.

基于MCS-SBL算法的配电网故障定位方法

配电网拓扑结构复杂,传统方法往往需要大量测点信息且难以实现快速有效的故障定位,本文提出基于少量测点信息的故障定位方法。首先,利用等效原理建立一个欠定的故障节点电压方程;其次,利用多重测量向量模型的贝叶斯压缩感知算法求解方程,根据重构稀疏电流矩阵的非零元素位置求解故障区域,实现故障定位;最后,在IEEE33节点配电系统上进行仿真实验,结果表明,所提方法仅需要少量测点的故障前后正序电压分量便可有效定位故障,计算速度较快,并且基本不受故障类型、过渡电阻的影响,同时适用于单故障和多重故障的场景,具有较强的抗噪能力。

基于HHT的绝缘子泄漏电流分析及放电状态分类识别

泄漏电流是污秽绝缘子在线监测参数,能动态地反映绝缘子表面的放电状态。文中开展了瓷绝缘子人工污秽放电试验,利用Hilbert-Huang变换分析了不同污闪阶段的泄漏电流固有模态函数分量、Hilbert边际谱与时频熵,从时频域及波形细节提取了15个特征量,使用主成分分析法与最小二乘支持向量机分类器对污秽放电状态进行识别。结果表明:起始放电阶段与闪络阶段的泄漏电流固有模态函数分量较多;泄漏电流的Hilbert边际谱上频率主要分布在0~150 Hz、200~250 Hz范围内;闪络前泄漏电流的时频熵值总是大于闪络后的;当训练样本数为测试样本数5倍及以上时,分类器的综合评判准确率可达99%,准确实现了污秽放电状态的分类识别。文中研究结果可为建立绝缘子污闪预警系统提供依据。

低复杂度永磁同步电机三矢量固定开关频率模型预测电流控制策略

针对传统永磁同步电机(permanent magnet synchronous motor,PMSM)三矢量模型预测电流控制(three-vector model predictive current control,TV-MPCC)存在开关频率不固定和计算复杂的问题,提出一种固定开关频率TV-MPCC策略。利用前一周期的零电压矢量和参考电压矢量所在扇区来快速筛选所需最优电压矢量和次优电压矢量,避免了无效枚举计算,从而降低了开关频率和计算复杂度。引入系统d和q轴电流差参数,计算各电压矢量的作用时间,确保电压矢量作用时间恒大于零和开关频率固定。以三相两电平电压型逆变器驱动的表贴式PMSM为被控对象,通过仿真和实验对传统TV-MPCC策略和所提三矢量固定开关频率模型预测电流控制策略进行对比研究,仿真和实验结果表明,所提策略在保证系统稳态和动态性能的基础上,在固定和降低开关频率的同时,降低了计算复杂度。

基于扩张状态观测器的永磁直线同步电机改进模型预测电流控制

针对永磁直线同步电机(PMLSM)模型预测电流控制(MPCC)中存在的电流脉动过大、在线计算复杂的问题,提出一种基于扩张状态观测器(ESO)的改进MPCC策略。利用最优电压矢量相角和重新划分后的电压矢量扇区,改进第一电压矢量的选取方式,减小第二电压矢量选择范围,以实现电压矢量的快速选取,进而降低电流脉动。同时,为了提高PMLSM抗负载扰动能力,通过ESO对扰动进行观测,将观测到的扰动转换为电流进行补偿,提高系统的鲁棒性,且补偿电流可起到进一步减小电流脉动的作用。仿真结果表明,所提出的控制方法切实可行,与MPCC相比,基于ESO的改进MPCC系统具有更好的控制性能、更小的电流脉动和较强的鲁棒性能。

面向电流源型PWM整流器的双矢量模型预测直接功率控制

电流源型脉宽调制(Pulse width modulation,PWM)整流器因其网侧存在LC滤波器,系统的控制难度增加。传统直接功率控制策略下的整流器功率波形存在脉动,因模型预测控制具有卓越的动态特性以及直观的控制规律,采用模型预测直接功率控制(Model predictive direct power control,MPDPC)对传统控制策略进行改进。首先建立了三相PWM整流器的数学模型,给出了每个采样周期内的功率变化率,并推导出相邻采样周期之间的功率关系,然后给出基于单矢量的模型预测直接功率控制策略,提出了基于双矢量的模型预测直接功率控制策略,并优选出两个电流矢量,计算在一个采样周期内的作用时间,并对其进行修正。最后,在Matlab/Simulink仿真软件验证了所提控制策略的可行性和有效性。