Impact of Blade-Flapping Vibration on Aerodynamic Characteristics of Wind Turbines under Yaw Conditions

Although the aerodynamic loading of wind turbine blades under various conditions has been widely studied,the radial distribution of load along the blade under various yaw conditions and with blade flapping phenomena is poorly understood.This study aims to investigate the effects of second-order flapwise vibration on the mean and fluctuation characteristics of the torque and axial thrust of wind turbines under yaw conditions using computational fluid dynamics(CFD).In the CFD model,the blades are segmented radially to comprehensively analyze the distribution patterns of torque,axial load,and tangential load.The following results are obtained.(i)After applying flapwise vibration,the torque and axial thrust of wind turbines decrease in relation to those of the rigid model,with significantly increased fluctuations.(ii)Flapwise vibration causes the blades to reciprocate along the axial direction,altering the local angle of attack and velocity of the blades relative to the incoming wind flow.This results in the contraction of the torque region from a circular shape to a complex“gear”shape,which is accompanied by evident oscillations.(iii)Compared to the tangential load,the axial load on the blades is more sensitive to flapwise vibration although both exhibit significantly enhanced fluctuations.This study not only reveals the impact of flapwise vibration on wind turbine blade performance,including the reduction of torque and axial thrust and increased operational fluctuations,but also clarifies the radial distribution patterns of blade aerodynamic characteristics,which is of great significance for optimizing wind turbine blade design and reducing fatigue risks.

Thrust Optimization of Flapping Wing via Gradient Descent Technologies

The current work aims at employing a gradient descent algorithm for optimizing the thrust of a flapping wing. An in-house solver has been employed, along with mesh movement methodologies to capture the dynamics of flow around the airfoil. An efficient framework for implementing the coupled solver and optimization in a multicore environment has been implemented for the generation of optimized solutionsmaximizing thrust performance & computational speed.

Influence of Flap Parameters on the Aerodynamic Performance of a Wind-Turbine Airfoil

A numerical method has been used to analyze the flow field related to a NACA 0015 airfoil with and without a flap and assess the influence of the flap height and angle on the surface pressure coefficient,lift coefficient,and drag coefficient.The numerical results demonstrate that the flap can effectively improve the lift coefficient of the airfoil;however,at small attack angles,its influence is significantly reduced.When the angle of attack exceeds the critical stall angle and the flap height is 1.5%of the chord length,the influence of the flap becomes very evident.As the flap height increases,the starting point of the separation vortex gradually moves forward and generates a larger wake vortex.Optimal aerodynamic characteristics are obtained for 1.5%(of the chord length)flap height and a 45°flap angle;in this case,the separation vortex is effectively reduced.

Structural Design and Analysis of Small Flapping Wing Aircraft Based on the Crank Slider Mechanism

In this project,the miniaturization of the aircraft was realized under the premise of strong maneuverability,high concealability,and driving a certain load,and the flight mode and structural characteristics of birds were imitated.A small bionic flapping wing aircraft was built.The flapping of the wing was realized by the crank slider mechanism,and the sizes of each part were calculated according to the bionics formula.The wingspan was 360.37 mm,the body width was 22 mm,the body length was 300 mm,the wing area was 0.05 m^(2),the flapping amplitude was 71°.ADAMS software was used to simulate the dynamics of the designed aircraft,and the variation of flapping amplitude and angular velocity during the movement of the aircraft was obtained,which verified the feasibility of the mechanism.The prototype aircraft was made for flight test,and the designed bionic flapping wing aircraft achieved the expected effect.It provides a theoretical basis and data support for the design and manufacture of small flapping wing aircraft.

Nasal flap preservation in endoscopic dacryocystorhinostomy for nasolacrimal duct obstruction

AIM:To compare surgical outcomes between the conventional endoscopic dacryocystorhinostomy(DCR)and a modified endoscopic DCR for the treatment of nasolacrimal duct obstruction(NLDO),and evaluate factors associated with the surgical success rate.METHODS:Medical records of patients who underwent primary DCR surgery between January 2016 and July 2020 at the Otorhinolaryngology Department of Eye and Ear International Hospital,Lebanon were reviewed.RESULTS:The study group consisted of 50 consecutive modified endoscopic DCR and the control group consisted of 138 consecutive conventional endoscopic DCR.The success rates at 1y were 98.0%(49 out of 50)for modified DCR,significantly higher compared to 84.8%(117/138)for the conventional DCR;there was no significant difference in the success rate throughout the years in terms of both surgical techniques.The modified surgery vs traditional[adjusted odds ratio(aOR)=14.96]and having an adjunctive septoplasty surgery vs not(aOR=3.99)were significantly associated with higher odds of success.CONCLUSION:Mucosal flap preservation and apposition shows significant improvement in the surgical success rate.Moreover,there is no statistically significant difference found in terms of complication rate and mean operative time between the conventional and the modified techniques.

Pedicled abdominal flap using deep inferior epigastric artery perforators for forearm reconstruction: A case report

BACKGROUND Pedicled abdominal flaps are a widely used surgical technique for forearm reconstruction in patients with soft tissue defects.However,some drawbacks include restricted flap size,partial flap loss,and donor-site morbidity.To address these concerns,we present a case of a pedicled abdominal flap using the deep inferior epigastric artery perforators(DIEP)for forearm reconstruction in a patient with a large soft tissue defect.CASE SUMMARY A 46-year-old male patient was admitted to our hospital with forearm injury caused by a pressing machine.A 15 cm×10 cm soft tissue defect with complete rupture of the ulnar side structures of the forearm was found.One week after orthopedic management of the neurovascular injury and fractures using the first stage of Masquelet technique,the patient was referred to the plastic and recon-structive surgery department for wound coverage.Surgical debridement and negative-pressure wound therapy revealed a 20 cm×15 cm soft tissue defect.A pedicle abdominal flap with the DIEP was used to cover the defect.Three weeks later,the flap was detached from the abdomen,and the abdominal defect was directly closed.Subsequently,the second stage of Masquelet technique was performed at the fracture site at week 10.Finally,all donor and recipient sites healed without complications,such as flap dehiscence,infection,hematoma,or necrosis.Fracture site osteosynthesis was achieved without complications.CONCLUSION Pedicled abdominal flap using the DIEP provides a reliable option for forearm reconstruction in patients with large soft tissue defects.

Evaluation of the versatility of perforators-enhanced rhomboid flap technique for ischial sores reconstruction

Background: Prolonged pressure on the skin known as pressure sores, can cause frequent injuries to the skin and underlying tissues. However, several prevention approaches, including non-surgical and surgical management,are available. In flap surgery for pressure sores, a variety of flap types may be used;each offers certain benefits and some incidences of complications and recurrence. This study evaluated the versatility of the perforatorenhanced rhomboid flap technique for ischial sore construction.Methods: This prospective study was conducted in the Plastic Surgery Department of Fayoum University Hospital.The perforator-enhanced rhomboid flap technique was employed in 20 patients with ischial pressure sores who failed to respond to conservative treatment. A proper history was obtained and a preoperative arterial duplex was performed to determine the site of the prominent perforators for their preservation at the base of the flap.Postoperative follow-ups and evaluations were performed.Results: The mean age of the study group was 43.7 ± 13.1, ranging from 19 to 65 years. Moreover, 80% of the participants were males while 20% were female. The main etiology of the sores was paraplegia in 45% of cases.The mean surface area of sores was 24.8 ± 6.3 cm2. In 75% of cases, the color match of the flap was rated as excellent. Similarly, 70% of the patients rated flap thickness as excellent. In 55% of the cases, the scar appearance was deemed excellent. Overall satisfaction was reported as excellent by 40% of the patients, while only 5% reported poor satisfaction. Approximately, 10% of the cases were identified with seroma, and 30% had wound dehiscence of a mean size of 1.33 ± 0.98 cm and required around 6.8 ± 1.9 weeks to heal.Conclusion: The perforator-enhanced rhomboid flap technique is a versatile method for reconstructing ischial pressure sores owing to its technical ease, short operative time, reliable vascularity, aesthetic outcome, matching skin color, and short recovery time. The main limitations include large defects with large surface areas, lack of a nearby donor site for a rhomboid flap, and scarring from prior procedures around the sore.

Adaptability of bipedicled scalp advancement flap for coverage of huge scalp defects after tumor resection

Background:Several reconstructive techniques have been used to reconstruct scalp defects.Numerous researchers have studied the utilization of bipedicled scalp advancement flaps for scalp defect coverage.In this study,we will assess the adaptability of a bipedicled scalp advancement flap for coverage of huge scalp defects after tumor resection.Methods:This study was performed at the Plastic Surgery Department,Fayoum University Hospital,on 20 patients with huge scalp tumors treated by adequate excision and reconstructed using a bipedicled scalp advancement flap from December 2021 to July 2023.Results:The study was conducted on 20 patients:16(80%)were men and 4(20%)were women presenting with large scalp tumors.The mean age was 57.4 years(33-68 years).The sites of the tumors were 10(50%)occipital,6(30%)parietal,and 4(20%)parieto-occipital.No major complications occurred postoperatively,and the bipedicled flaps survived well in all cases,with no necrosis.Conclusion:Huge scalp defects after tumor resection can be safely reconstructed with a large versatile bipedicled advancement scalp flap,either transversely or longitudinally oriented,with favorable functional results and accepted aesthetic results,apart from the alopecic area over the grafted donor site,which can be treated by tissue expansion if desired later.

Lateral circumflex femoral artery perforator flap for the reconstruction of head soft tissue defects:Cross-region venous anastomosis

Background:Owing to its unique characteristics,the lateral circumflex femoral artery perforator(LCFAP)flap is often preferred for repairing head wounds with exposed skulls.However,given the vascular distribution in the head,particularly the veins,can lead to postoperative complications such as venous congestion of the flap.The rates of vascular exploration and necrosis in these flaps are significantly higher than in other body regions.Therefore,it is crucial to identify a safe and effective method for venous anastomosis of free flaps in the head region.Methods:This retrospective case series study included 10 patients with large head soft tissue defects treated at the Burn and Plastic Surgery Department of the Affiliated Hospital of Zunyi Medical University from January 2020 to December 2022.The head defects were reconstructed using LCFAP flaps,with flap veins anastomosed to the external jugular vein in the neck,either directly or via a bridging technique.Results:Among the 10 adult patients with massive head wound defects,7(70%)were men.The patients’mean age was 53.0 years(48–59 years).The wound defects were caused by trauma in 6(60%)patients and by tumors in 4(40%)patients.Postoperatively,no significant complications occurred,and all LCFAP flap survived without necrosis.Conclusion:The descending branch of the LCFAP flap effectively repairs massive head wound defects.The venous anastomosis method for this flap is associated with a low incidence of venous complications and a high patency rate,making it a clinically valuable reference.

When the Combination of a Chinese Flap and Dufourmentel Makes It Possible to Treat a Hopeless Case of Squamous Cell Carcinoma of the Upper Lip

Cancers of the lip are the leading cause of labial defects, and treatment is essentially surgical. The success of a repair is assessed by two essential criteria: The functional character of the lip (restoration of continence allowing feeding) and the aesthetic quality of the repair. However, for many patients from countries whose medical infrastructure does not allow them to undertake complex reconstructions locally, medical transfers represent their only chance of treatment. The aim of this article is to share with you an extreme clinical case of labial reconstruction, the management of which was a real challenge, using two major flaps: the free ante-brachial flap and the DUFOURMENTEL-type bi-pediculated scalp flap.

Management of Square Carcinoma of the Lower Lip Using Camille-Bernard Flap under Local Anesthesia: When Constraints Dictate Our Attitude

Introduction: Squamous cell carcinomas of the lip essentially pose a therapeutic management problem. In the West, their treatment is done under general anesthesia and follows the classic rules of oncology. In our context of exercise, we sometimes have a different attitude dictated by various constraints. Observation: 55-year-old patient with no notable history, seen in consultation for a very large ulcerative-budding lesion on the right 2/3 of the lower lip with mucocutaneous involvement without lymph node findings found on examination. Faced with this suspicious lesion and the patient’s financial difficulties, we decided to operate under local anesthesia to remove this tumor. The oncological excision was followed by immediate plasty using a Camille-Bernard flap with a good immediate aesthetic and functional result and postoperative day 7. The patient was unable to take his surgical specimen to anatomy-pathology and was lost to follow-up due to lack of financial resources. On anatomo-pathological analysis of the surgical specimen, the margins were healthy with confirmation of squamous cell carcinoma (anapathological reading made for scientific interest). Discussion: The particular mentality of certain patients and their difficult financial conditions push us to have an unconventional therapeutic attitude in oncology, but which nevertheless makes it possible to resolve certain problems that we often face. Local anesthesia is possible and realistic in cases like ours and the results can be acceptable and life-saving.

Using Mustardé Flap for Reconstruction of a Traumatic Facial Injury: Case Report

Flaps become the first option when primary closure is not possible, using them to reduce the tension in the closure, as well as improving the texture and color, which ends in having a better aesthetic outcome. The Mustardé flap is a flap used for the cheek and lower eye lid defects. We present a 26-year-old male with an avulsive wound in the right maxillary region, with no bone injuries, taken to the operative room performing a Mustardé Flap for reconstruction of the defect area. Patient completed a 7-day antibiotic regimen, using non-steroid anti-inflammatories for pain, wound cleaning and flap hydration with mineral oil, subsequently having an adequate clinical and aesthetic evolution. Conclusion: The Mustardé flap can be a useful pedicled flap for the reconstruction of full-thickness defects.

Sternocleidomastoid flap for reconstruction of tongue small cell carcinoma: A case report

BACKGROUND The management of tongue carcinoma is excision and radical neck dissection followed with reconstruction.This is a case report of a patient with tongue squamous cell carcinoma(SCC)who underwent the procedure with sternocleidomastoid(SCM)flap reconstruction.CASE SUMMARY A 52-year-old woman without smoking history complained tongue ulcer since 3 years ago.Based on the histopathological examination,the patient was diagnosed with T2N2M0 right tongue SCC and underwent wide excision of tumor;right mandibular;neck dissection and were reconstructed with SCM flap.CONCLUSION SCC of the tongue requires wide excision and dissection of the neck and mandible if infiltration into the surrounding lymph nodes has been found.The SCM flap reconstruction could be used post-surgery.

Unusual Anterolateral Fascio Cutaneous Tight Flap for Extremity Soft Tissue Reconstruction

Soft tissue sarcoma is rare neoplasms that affect mainly the extremities. Surgery is the mean treatment and the resection results in extensive muscle and skin loss. The anterolateral tight flap is a good option for sarcomas arising in knees, superior third of legs and the medial face of thigh. The anatomy knowledge and the multidisciplinary approach is very important for a successful reconstruction. The authors report a successful case treated with the anterolateral tight flap and a literature review.

Utility of Preoperative Positron Emission Tomography (PET) in Localizing Perforator Vessels of Anterolateral Thigh Free Flap

Objectives: The anterolateral thigh (ALT) flap is often considered the workhorse in soft tissue reconstruction of head and neck defects secondary to trauma, infection, or tumor resection. Despite its many advantages, ALT flaps have been criticized due to variability in vasculature, which may result in inadequate or non-existent perforators. This retrospective study aims to investigate the utility and validity of positron emission tomography (PET) scan to identify the location and characteristics of perforators to the ALT flap. Methods: We performed a 10-year retrospective review of ALT flaps at our institution to identify patients with preoperative PET scans available for analysis. Three reviewers (attending physician, fellow, and resident) were asked to identify the number, location, and characteristics (myocutaneous versus septocutaneous) of ALT perforators on imaging, and reviewer agreement was assessed. Results were then compared to available operative data. Results: One hundred twenty-one patients were identified who underwent ALT free flap surgery. Thirty-eight preoperative PET scans were identified for review. At least one perforator was identified in 92.1% of scans. Agreement percentages regarding the number of perforators ranged from 53% - 61% whereas agreement regarding the location of a single perforator ranged from 79% - 90%. However, reviewers did not agree regarding the type of perforator, with agreement ranging from 34% - 53%. Poor agreement was observed when compared to intraoperative data, with the number of perforators ranging from 26% - 34% and the type of perforator 11% - 24%. These findings are likely due to insufficient data available in operative reports. Conclusion: Although initial studies suggest that PET scan shows promising evidence to support the capacity to preoperatively identify ALT perforators, future prospective studies are warranted to fully validate these findings.

Numerical analysis of the s1020 airfoils in tandem under different flapping configurations

The objective of this project is to improve the performance of the efficiency, thrust and lift of flapping wings in tandem arrangement. This research investigates the effect of the arrangement of the airfoils in tandem on the performance of the airfoils by varying the phase difference and distance between the airfoils. Three flapping configurations from an earlier phase of a research which gives high efficiency, thrust and lift are used in the tandem simulation. It is found all the different flapping configurations show improvement in the efficiency, thrust or lift when the distance between the two airfoils and the phase angle between the heaving positions of the two airfoils are optimal. The average thrust coefficient of the tandem arrangement managed to attain more than twice that of the single one （4.84 vs. 2.05）. On the other hand, the average lift coefficient of the tandem arrangement also increased to 4.59, as compared to the original single airfoil value of 3.04. All these results obtained will aid in the design of a better ornithopter with tandem wing arrangement.

A flow control mechanism in wing flapping with stroke asymmetry during insect forward flight

A theoretical modeling approach as well as an unsteady analytical method is used to study aerodynamic characteristics of wing flapping with asymmetric stroke-cycles in connection with an oblique stroke plane during insect forward flight. It is revealed that the aerodynamic asymmetry between the downstroke and the upstroke due to stroke-asymmetrical flapping is a key to understand the flow physics of generation and modulation of the lift and the thrust. Predicted results for examples of given kinematics validate more specifically some viewpoints that the wing lift is more easily produced when the forward speed is higher and the thrust is harder, and the lift and the thrust are generated mainly during downstroke and upstroke, respectively. The effects of three controlling parameters, i.e. the angles of tilted stroke plane, the different downstroke duration ratios, and the different angles of attack in both down- and up-stroke, are further discussed. It is found that larger oblique angles of stroke planes generate larger thrust but smaller lift; larger downstroke duration ratios lead to larger thrust, while making little change in lift and input aerodynamic power; and again, a small increase of the angle of attack in downstroke or upstroke may cause remarkable changes in aerodynamic performance in the relevant stroke.

Aerodynamic Effects of Corrugation in Flapping Insect Wings in Forward Flight

We have examined the aerodynamic effects of corrugation in model wings that closely mimic the wing movements of a forward flight bumblebee using the method of computational fluid dynamics. Various corrugated wing models were tested （care was taken to ensure that the corrugation introduced zero camber）. Advance ratio ranging from 0 to 0.57 was considered. The results shown that at all flight speeds considered, the time courses of aerodynamic force of the corrugated wing are very close to those of the flat-plate wing. The cornlgation decreases aerodynamic force slightly. The changes in the mean location of center of pressure in the spanwise and chordwise directions resulting from the corrugation are no more than 3% of the wing chord length. The possible reason for the small aerodynamic effects of wing corrugation is that the wing operates at a large angle of attack and the flow is separated： the large angle of incidence dominates the corrugation in determining the flow around the wing, and for separated flow, the flow is much less sensitive to wing shape variation.

AERODYNAMIC FORCE AND FLOW STRUCTURES OF TWO AIRFOILS IN FLAPPING MOTIONS

Aerodynamic force and flow structures of two airfoils in a tandem configuration in flapping motions axe studied, by solving the Navier-Stokes equations in moving overset grids. Three typical phase differences between the fore- and aft-airfoil flapping cycles are considered. It is shown that: (1) in the case of no interaction (single airfoil), the time average of the vertical force coefficient over the downstroke is 2.74, which is about 3 times as large as the maximum steady-state lift coefficient of a dragonfly wing; the time average of the horizontal force coefficient is 1.97, which is also large. The reasons for the large force coefficients are the acceleration at the beginning of a stroke, the delayed stall and the 'pitching-up' motion near the end of the stroke. (2) In the cases of two-airfoils, the time-variations of the force and moment coefficients on each airfoil are broadly similar to that of the single airfoil in that the vertical force is mainly produced in downstroke and the horizontal force in upstroke, but very large differences exist due to the interaction. (3) For in-phase stroking, the major differences caused by the interaction are that the vertical force on FA in downstroke is increased and the horizontal force on FA in upstroke decreased. As a result, the magnitude of the resultant force is almost unchanged but it inclines less forward. (4) For counter stroking, the major differences are that the vertical force on AA in downstroke and the horizontal force on FA in upstroke are decreased. As a result, the magnitude of the resultant force is decreased by about 20 percent but its direction is almost unchanged. (5) For 90 degrees -phase-difference stroking, the major differences axe that the vertical force on AA in downstroke and the horizontal force on FA in upstroke axe decreased greatly and the horizontal force on AA in upstroke increased. As a result, the magnitude of the resultant force is decreased by about 28% and it inclines more forward. (6) Among the three cases of phase angles, inphase flapping produces the largest vertical force (also the largest resultant force); the 90 degrees -phase-difference flapping results in the largest horizontal force, but the smallest resultant force.

Numerical investigation on aerodynamic performance of a bionic flapping wing

This paper numerically studies the aerodynamic performance of a bird-like bionic flapping wing.The geometry and kinematics are designed based on a seagull wing,in which flapping,folding,swaying,and twisting are considered.An in-house unsteady flow solver based on hybrid moving grids.is adopted for unsteady flow simulations.We focus on two main issues in this study,i.e.,the influence of the proportion of down-stroke and the effect of span-wise twisting.Numerical results show that the proportion of downstroke is closely related to the efficiency of the flapping process.The preferable proportion is about 0.7 by using the present geometry and kinematic model,which is very close to the observed data.Another finding is that the drag and the power consumption can be greatly reduced by the proper span-wise twisting.Two cases with different reduced frequencies are simulated and compared with each other.The numerical results show that the power consumption reduces by more than 20%,and the drag coefficient reduces by more than 60% through a proper twisting motion for both cases.The flow mechanism is mainly due to controlling of unsteady flow separation by adjusting the local effective angle of attack.These conclusions will be helpful for the high-performance micro air vehicle (MAV) design.