Digitalization of inverting filter shaping circuit for nuclear pulse signals

In the design of filter shaping circuits for nuclear pulse signals,inverting filter shaping circuits perform better than non-inverting filter shaping circuits.Because these circuits facilitate changing the phase of a pulse signal,they are widely used in processing nuclear pulse signals.In this study,the transfer functions of four types of inverting filter shaping circuits,namely the common inverting filter shaping,improved inverting filter shaping,multiple feedback low-pass filter shaping,and third-order multiple feedback low-pass filter shaping,in the Laplacian domain,are derived.We establish the numerical recursive function models and digitalize the four circuits,obtain the transfer functions in the Z domain,and analyze the filter performance and amplitude-frequency response characteristics in the frequency domain.Based on the actual nuclear pulse signal of the Si-PIN detector,we realize four types of inverting digital shaping.The results show that under the same shaping parameters,the common inverting digital shaping has better amplitude extraction characteristics,the third-order multiple feedback low-pass digital shaping has better noise suppression performance,and the multiple feedback digital shaping takes into account both pulse amplitude extraction and noise suppression performance.

Spectrum shuttle for producing spatially shapable GHz burst pulses

Spatiotemporal shaping of ultrashort pulses is pivotal for various technologies,such as burst laser ablation and ultrafast imaging.However,the difficulty of pulse stretching to subnanosecond intervals and independent control of the spatial profile for each pulse limit their advancement.We present a pulse manipulation technique for producing spectrally separated GHz burst pulses from a single ultrashort pulse,where each pulse is spatially shapable.We demonstrated the production of pulse trains at intervals of 0.1 to 3 ns in the 800-and 400-nm wavelength bands and applied them to ultrafast single-shot transmission spectroscopic imaging(4 Gfps)of laser ablation dynamics with two-color sequentially timed all-optical mapping photography.Furthermore,we demonstrated the production of pulse trains containing a shifted or dual-peak pulse as examples of individual spatial shaping of GHz burst pulses.Our proposed technique brings unprecedented spatiotemporal manipulation of GHz burst pulses,which can be useful for a wide range of laser applications.

The study of numerical character for femtosecond pulse shaping

This paper describes the generation of shaped femtosecond multiple pulses by using the phase-only Dammann filters in 4f femtosecond shaper and gives the experimental result of femtosecond pulse characterization by the frequency- resolved optical gating （FROG） technique. With the theoretical simulation, it concludes that the quality of the generated output array is relevant to the number of pixels and the spacing between the components.

Femtosecond strong-field coherent control of nonresonant ionization with shaped pulses

The strong-field coherent control of the nonresonant ionization of nitrous oxide using shaped pulses is investigated.We study the dependence of periodic coherent oscillation of the total ionization yield on the variation of laser phase parameters. The physical mechanism of the strong-field coherent control is investigated experimentally and theoretically by the nonresonant spectral phase interferences in the frequency domain. We show that the intense shaped pulses with broadband and off-resonance can be used as a robust strong-field coherent control method.

Study of time-domain digital pulse shaping algorithms for nuclear signals

With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model.Mathematic models are established based on 1st order digital differential method and Kirchhoff Current Law in time domain,and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA.A digital shaping test for a semiconductor X-ray detector in real time is also presented.Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods.By applying the 2nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal.Finally,computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms.

Selective excitation and suppression of coherent anti-Stokes Raman scattering by shaping femtosecond pulses

Femtosecond coherent anti-Stokes Raman scattering （CARS） suffers from poor selectivity between neighbouring Raman levels due to the large bandwidth of the femtosecond pulses. This paper provides a new method to realize the selective excitation and suppression of femtosecond CARS by manipulating both the probe and pump （or Stokes） spectra. These theoretical results indicate that the CARS signals between neighbouring Raman levels are differentiated from their indistinguishable femtosecond CARS spectra by tailoring the probe spectrum, and then their selective excitation and suppression can be realized by supplementally manipulating the pump （or Stokes） spectrum with the π spectral phase step.

Implementation of a cusp-like for real-time digital pulse shaper in nuclear spectrometry

Pulse shaping,which improves signal-to-noise ratio excellently,has been extensively used in nuclear signal processing.This paper presents a cusp-like pulse-shaping technique developed through the recursive difference equation in time domain.It can be implemented in field programmable gate array hardware system.Another flat-topped cusp-like shaper is developed to optimize the time constant of pulse shaping and reduce the influence of ballistic deficit.The methods of both baseline restoration and pile-up rejection are described.The ^(137)Cs energy spectra measured with the digital cusp-like shaper are 6.6% energy resolution,while those by traditional analog pulse shaper are 7.2% energy resolution,under the same conditions.This technique offers flexibility,too,in adjusting the pulse shaper parameters.

New methods to remove baseline drift in trapezoidal pulse shaping

Trapezoidal pulse shaping algorithm is widely applied to improve signal-to-noise ratio(SNR), throughput and energy resolution with the properties of noise suppression, pile-up pulse separation and ballistic deficit correction. The algorithm can be acquired by z transform method which is easier for derivation. However, the baseline drift of trapezoidal pulse appears because the noise superimposes on the input signal. In this paper,two new methods based on convergence analysis and noise suppression are proposed to remove the baseline drift resulting from trapezoidal pulse shaping. Simulations and experimental tests are carried out to verify the methods. The results demonstrate that the proposed methods can remove baseline drift in trapezoidal pulse shaping.

Interaction of a parabolic-shaped pulse pair in a passively mode-locked Yb-doped fiber laser

We numerically investigate the formation and interaction of a parabolic-shaped pulse pair in a passively mode-locked Yb-doped fiber laser. Based on a lumped model, the parabolic-shaped pulse pair is obtained by controlling the intercavity average dispersion and gain saturation energy, Moreover, pulse repulsive and attractive motion are also achieved with different pulse separations. Simulation results show that the phase shift plays an important role in pulse interaction, and the interaction is determined by the inter-cavity average dispersion and gain saturation energy, i.e., the strength of the interaction is proportional to the gain saturation energy, a stronger gain saturation energy will result in a higher interaction intensity. On the contrary, the increase of the inter-cavity dispersion will counterbalance some interaction force. The results also show that the interaction of a parabolic-shaped pulse pair has a larger interaction distance compared to conventional solitons.

A pulse shape discrimination of CsI(Tl) crystal with ~6He beam

The performance test of a CsI(Tl) crystal (70×27×23 mm3) was performed by applying the pulse shape discrimination technique for identification of light charged particles .The crystal is coupled to a photomultiplier tube during an experiment with 6He beam.The pulse waveform is fully recorded by employing a high precision digital oscilloscope.The fast and slow gates are used for the pulse shape discrimination and the best values for the gate widths were determined to be 0.5 μs and 1.67 μs,respectively.The 6He,4He and 3He are successfully discriminated with this technique.

Controlling Rydberg excitation process with shaped intense ultrashort laser pulses

We perform a theoretical investigation on the control over the atomic excitation of Rydberg states with shaped intense ultrashort laser pulses. By numerically solving the time-dependent Schr?dinger equation（TDSE）, we systematically study the dependence of the population of the Rydberg states on the π phase step position in the frequency spectra of the laser pulse for different intensities, central wavelengths and pulse durations. Our results show that the Rydberg excitation process can be effectively modulated using shaped intense laser pulses with the laser intensity as high as 1 × 1014 W/cm2. Our work also have benefit to the future investigation to find out the dominant mechanism behind the excitation of Rydberg states in strong laser fields.

Coherent control of fragmentation of methyl iodide by shaped femtosecond pulse train

Coherent control of fragmentation of CH_3I using shaped femtosecond pulse train is investigated.The dissociation processes can be modulated by changing the separation of the shaped pulse train, and the yield of I^+under the irradiation of the optimal pulse is significantly increased compared with that using the transform-limited pulse.We discuss the control mechanism of dissociation processes with coherent interference in time domain.A three-pulse control model is proposed to explain the counterintuitive experimental results.

The Neutron-Gamma Pulse Shape Discrimination Method for Neutron Flux Detection in the ITER

The neutron flux monitor （NFM）, as a significant diagnostic system in the International Thermonuclear Experimental Reactor （ITER）, will play an important role in the readings of a series of key parameters in the fusion reaction process. As the core of the main electronic system of the NFM, the neutron-gamma pulse shape discrimination （n-γ PSD） can distinguish the neutron pulse from the gamma pulse and other disturbing pulses according to the thresholds of the rising time and the amplitude pre-installed on the board, the double timing point CFD method is used to get the rising time of the pulse. The n-γ PSD can provide an accurate neutron count.

On-chip optical pulse shaper for arbitrary waveform generation

We propose and demonstrate a silicon-on-insulator （SOI） on-chip optical pulse shaper based on four-tap finite impulse response. Due to different width designs in phase region of each tap, the phase differences for all taps are controlled by an external thermal source, resulting in an optical pulse shaper. We further demonstrate optical arbitrary waveform generation based on the optical pulse shaper assisted by an optical frequency comb injection. Four different optical waveforms are generated when setting the central wavelengths at 1533.78 nm and 1547.1 nm and setting the thermal source temperatures at 23 ℃ and 33 ℃, respectively. Our scheme has distinct advantages of compactness, capability for integrating with electronics since the integrated silicon waveguide is employed.

Optical pulse shaper with integrated slab waveguide for arbitrary waveform generation using optical gradient force

Integrated optical pulse shaper opens up possibilities for realizing the ultra high-speed and ultra wide-band linear signal processing with compact size and low power consumption. We propose a silicon monolithic integrated optical pulse shaper using optical gradient force, which is based on the eight-path finite impulse response. A cantilever structure is fabricated in one arm of the Mach–Zehnder interferometer（MZI） to act as an amplitude modulator. The phase shift feature of waveguide is analyzed with the optical pump power, and five typical waveforms are demonstrated with the manipulation of optical force. Unlike other pulse shaper schemes based on thermo–optic effect or electro–optic effect, our scheme is based on a new degree of freedom manipulation, i.e., optical force, so no microelectrodes are required on the silicon chip,which can reduce the complexity of fabrication. Besides, the chip structure is suitable for commercial silicon on an insulator（SOI） wafer, which has a top silicon layer of about 220 nm in thickness.

Study on welding power source used in intelligent control system for weld pool shape in pulsed GTAW

This paper analyses the performance request of arc welding power source used in intelligent control of weld pool shape in pulsed GTAW, and develops a sample power source. The main circuit of the power source takes the structure of single ended inverter with two switches, and takes IGBTs as power switches. The working frequency of the inverter is set at 20 kHz. The control circuit takes PWM circuit as center, and uses single chip computer to complete the manage functions such as the control of working sequence, setting and changing of the welding parameters, sensing of the welding states and communication with outside computer etc. The dynamic reacting time of the whole power is 1 ms, the range of the output current is 5～250 A, the precision of the output current reaches to 1 A. The power strikes arc by contacting workpiece under 5 A, and have convenient interface with system computer. All above shows this power source is one with high performance.

Pulse-shaping method for real-time neutron/gamma discrimination at low sampling rates

The Na I:Tl scintillator is an innovative material for dual-gamma-ray and neutron detection with a low ^(6)Li concentration.To achieve real-time n/γ discrimination,a zero-crossing time comparison algorithm based on trapezoidal pulse shaping was developed.The algorithm can operate efficiently at low sampling rates and was implemented on a single-probe portable digital n/γ discriminator based on a field-programmable gate array.The discriminator and Na I:Tl,^(6)Li detector were tested in a neutron-gamma mixed field produced by an ^(241)Am-Be neutron source to evaluate the performance of the algorithm.The figure of merits was measured as 2.88 at a sampling rate of 50 MHz,indicating that the discriminator with its embedded algorithm has a promising n/γ discrimination capability.Efficient discrimination at sampling rates of 40 and 25 MHz demonstrates that the capability of this method is not limited by low sampling rates.

Artificial neural network algorithm for pulse shape discrimination in 2πα and 2πβ particle surface emission rate measurements

To enhance the accuracy of 2πα and 2πβ particle surface emission rate measurements and address the identification issues of nuclides in conventional methods, this study introduces two artificial neural network(ANN) algorithms: back-propagation(BP) and genetic algorithm-based back-propagation(GA-BP). These algorithms classify pulse signals from distinct α and β particles. Their discrimination efficacy is assessed by simulating standard pulse signals and those produced by contaminated sources, mixing α and β particles within the detector. This study initially showcases energy spectrum measurement outcomes, subsequently tests the ANNs on the measurement and validation datasets, and contrasts the pulse shape discrimination efficacy of both algorithms. Experimental findings reveal that the proportional counter's energy resolution is not ideal, thus rendering energy analysis insufficient for distinguishing between 2πα and 2πβ particles. The BP neural network realizes approximately 99% accuracy for 2πα particles and approximately 95% for 2πβ particles, thus surpassing the GA-BP's performance. Additionally, the results suggest enhancing β particle discrimination accuracy by increasing the digital acquisition card's threshold lower limit. This study offers an advanced solution for the 2πα and 2πβ surface emission rate measurement method, presenting superior adaptability and scalability over conventional techniques.

Femtosecond Stimulated Raman Line Shapes:Dependence on Resonance Conditions of Pump and Probe Pulses

Resonance enhancement has been increasingly employed in the emergent felntosecond stimu- lated Raman spectroscopy （FSRS） to selectively monitor molecular structure and dynamics with improved spectral and temporal resolutions and signal-to-noise ratios. Such joint eflforts by the technique- and application-oriented scientists and engineers have laid the foundation for exploiting the tunable FSRS methodology to investigate a great variety of photosensitive systems and elucidate the underlying functional mechanisms on molecular time scales. Dur- ing spectral analysis, peak line shapes remain a major concern with an intricate dependence on resonance conditions. Here, we present a comprehensive study of line shapes by tuning the Rarnan pump wavelength from red to blue side of the ground-state absorption band of the fluorescent dye rhodarnine 6G in solution. Distinct line shape patterns in Stokes and anti-Stokes FSRS as well as from the low to high-frequency modes highlight the competition between multiple third-order and higher-order nonlinear pathways, governed by difl^rent res- onance conditions achieved by Raman pump and probe pulses. In particular, the resonance condition of probe wavelength is revealed to play an important role in generating circular line shape changes through oppositely phased dispersion via hot luminescence （HL） pathways. Meanwhile, on-resonance conditions of the Rarnan pump could promote excited-state vibrational modes which are broadened and red-shifted from the coincident ground-state vibrational modes, posing challenges for spectral analysis. Certain strategies in tuning the Raman pump and probe to characteristic regions across an electronic transition band are discussed to improve the FSRS usability and versatility as a powerful structural dynamics toolset to advance chemical, physical, materials, and biological sciences.

Fast Fading Channel Neural Equalization Using Levenberg-Marquardt Training Algorithm and Pulse Shaping Filters

Artificial Neural Network (ANN) equalizers have been successfully applied to mitigate Inter symbolic Interference (ISI) due to distortions introduced by linear or nonlinear communication channels. The ANN architecture is chosen according to the type of ISI produced by fixed, fast or slow fading channels. In this work, we propose a combination of two techniques in order to minimize ISI yield by fast fading channels, i.e., pulse shape filtering and ANN equalizer. Levenberg-Marquardt algorithm is used to update the synaptic weights of an ANN comprise only by two recurrent perceptrons. The proposed system outperformed more complex structures such as those based on Kalman filtering approach.