Research on Performance of a Rectangular Floatation Cushion with High Stiffness for a Pneumato-static Slideway

In this paper, a high stiffness rectangular floatation cushion with a variable-section pressure equalizing groove of an elastic membrane for a pneumato-static slideway is presented and designed in order to increase stiffness of the floatation cushion. Gas film pressure distribution and carrying capacity of the floatation cushion are studied through theoretical analysis and by using the overlapping stitching technique. The carrying capacity and stiffness were obtained by using the coupling procedure of the gas lubrication governing equation and elastic deformation of the membrane governing equation. The results of theoretical calculations can obtain a conclusion that the effect of the gas pressure makes the annular elastic membrane elastically deform that brings about changes of throttling area and pressure groove depth of the floatation cushion. It makes carrying capacity and stiffness of the new style floata- tion cushion markedly improve over the conventional flotation cushion. The new floatation cushion has a wider ap- plication and popularization of space. Key words： floatation cushion; variable-section pressure equalizing groove;stiffness

Indirect Determination of CTMAB with Sodium Chloride and Ammonium Thiocyanate by Floatation and Separation of Zinc

A new method for indirect determination of cetyl-trimethyl ammonium bromide (CTMAB) with NaCl and NH4SCN by floatation and separation of zinc has been studied. The study shows that Zn(II) can associate with NH4SCN and CTMAB to form insoluble ternary ion-association complex, and the precipitate can float on the surface of the liquid phase. A good linear relationship is observed between the floatation yield (E%) of Zn(II) and the amount of CTMAB. On the ground, CTMAB can be indirectly determined by determining E% of Zn(II). The results were satisfactory.

ENRICHMENT OF TRACE OF GOLD BY MEANS OF ION FLOATATION

Froth floatation possesses the advantages of simplicity, rapidity, and high efficiency. It may be divided into two classes: ion and precipitate floatations. At present, the enrichment factor for ion floatation of gold is 30, or the sample is enriched to a concentration of 5×10-4 mol. Our procedure attains an enrichment factor not less than 102, while the time does not exceed half an hour.

气浮法在中信红树湾生态景观水池水质维护中的应用

1项目概况中信红树湾3、4期中心水景池,水面面积3500m2,水深0.3～0.8m,水体总容积约1550m3。水体内规划两处人工湿地,种植水生植物,水中放养鱼类等水生动物,水质清澈,辅以跌水、喷泉等。

Experimental investigation and modeling of flotation column for treatment of oily wastewater

A unique cyclonic static microbubble flotation column was developed for oily wastewater separation.The separation effciency was found to be highly dependent on gas holdup and bubble size distribution.By changing the circulation pressure,gas flow rate,frother concentration,the effect of operation parameters on gas holdup and oil removal effciency were attained.A mathematical modeling between the kinetic constant and the gas holdup was established for oily water separation process.The results show that higher gas holdup and smaller microbubble sizes are benefcial to improve oil removal effciency.

Growth of covellite crystal onto azurite surface during sulfurization and its response to flotation behavior

In this work,the growth of copper sulfide crystal onto azurite surfaces during sulfurization and its response to flotation are investigated.Filed emission scanning electron microscopy-energy dispersive X-ray spectroscopy(FESEM) and X-ray diffraction(XRD) studies confirmed that the sulfurization of azurite is not limited to the mineral surface,but rather penetrates into the bulk to form covellite crystal(synCuS),creating favorable conditions for the stable adsorption of xanthate and greatly promoting the azurite flotation.Additionally,as demonstrated by X-ray photoelectron spectroscopy(XPS) and time of flight secondary ion mass spectrometry(TOF-SIMS) analyses,a redox reaction occurred during this process,and Cu(Ⅱ) onto the mineral surface was reduced to Cu(Ⅰ).Correspondingly,reduced S^(2-) was oxidized to(S_(2))^(2-),(S_n)^(-2),and even to deeper oxidation state S~0,(S_(x)O_(y))^(n-) and SO_(4)^(2-).Excess sodium sulfide strengthens copper sulfide to form onto the azurite surface,and provides enough raw material for crystal copper sulfide to grow,resulting in the formation of "flake-like" covellite with a better crystallinity.However,the floatability of azurite decreased dramatically under this condition,because the generated massive colloidal copper sulfide in flotation pulp deteriorates the flotation environment,resulting in a decreased effective adsorption of collector onto azurite surfaces.

Effect of 2-aminothiophenol on the separation of jamesonite and marmatite

The minerals jamesonite and marmatite have similar surface properties.Separating them using a flotation method is inefficient.For separation of lead and zinc the lead mineral is generally floated preferentially to the zinc mineral,which appears in the sinks.In this study a new of collector,2-aminothiophenol,is introduced that can float a zinc mineral,as a product entrapped in foam,preferentially.Single mineral flotation tests revealed that 2-aminothiophenol has good selectivity for flotation of marmatite. An artificial mixture of minerals used in a flotation test showed that 2-aminothiophenol can effectively separate marmatite from jamesonite.A product assaying at 45.06%Zn and 4.06%Pb was produced.FTIR spectra were employed to probe the adsorption mechanism of 2-aminothiophenol onto marmatite.The results indicate that adsorption of 2-aminothiophenol onto jamesonite and marmatite were,respectively,physical adsorption and chemical adsorption.This agrees with the flotation results.

Flotation of Xinhua molybdenite using sodium sulfide as modifier

The feasibility of using sodium sulfide as the sole modifier for the flotation of Xinhua molybdenite ore was examined.The potential mechanisms involved in the different flotation systems were discussed.The comparative flotation results reveal that in the kerosene-sodium silicate flotation system,better recovery and grade of the molybdenum are obtained using sodium sulfide as the slurry pH adjustment agent than using CaO.Under the optimal conditions(64 g/t kerosene and 6 kg/t Na2S),satisfied recovery and grade of molybdenite concentrate can be achieved(84%and 8.2%,respectively),indicating that sodium sulfide is a potential substitute modifier of sodium silicate.The open-circuit flotation test results further confirm the effectiveness of sodium sulfide which may render recycling the tailing water possible and make the flotation process more environmental acceptable and more economical due to the less use of kerosene and scavengers.

EXPERIMENTAL STUDY ON UPGRADING OF A FINE-SCALED GRAPHITE ORE BY FLOTATION

Based on the quality and analysis of the medium carbon product whose grade was 81%-82%, the emphasis of the study was placed on the orthogonal experiments of roughing flotation reagent and single factors, such as abrasive grain, pulp concentration and the rotating speed of flotation machine. The result with improvement in the grade of concentrate to 95% through the routine floatation method was achieved.

Study on the Mechanism of Ultrasonically Enhanced Flotation Desulphurization

The mechanism of ultrasonic action and the influence of ultrasonic treatment on the changfs or particle size, dissolved oxygen, pH and the feasibility of flotation desul phurization with ultrasonic enhancement are studied. A new means of ultrasonic treatment for slurry is put forward. The test results indicate that by employing this means and an approprlate floatation technology and pyrite-depressed method, the optimum effect of rlotation desul phurization can be achieved.

SURFACE CHEMICAL CHARACTERISTICS AND FLOATION SEPARATION OF WOLLASTONITE AND GARNET

In order to nealize the efficient floatation separation of garnet and uiollastonite , the authors studied the surface chemical charac-teristics and various floatation behaviour of the two minerals?developed acidic combination depressant FDi and introduced sodium oleate j FeCls and FDi as the flotation agent, they achieved success. In the experimental re-search on the artificiallymixed ores separation, the recovery and concentra-tion grade of the two minerals ivere both over 92% and 95% respectively. At the same time , it was found that the chemical absorption form of iron oleate presented bridge and chelating patterns on the surfaces of garnet and wollastonite activated by Fe3+.

Removal of Silica and Alumina as Impurities from Low-Grade Iron Ore Using Wet High-Intensity Magnetic Separation and Reverse Flotation

This study investigates the removal of silica and alumina as impurities from hematite based low-grade iron ore containing 34.18 mass% iron, 31.10 mass% of silica and 7.65 mass% alumina. Wet high-intensity magnetic separation (WHIMS) and reverse flotation (RF) were investigated. In WHIMS process, 93.08% of iron was recovered with a grade of 53.22 mass% at an optimum magnetic density of 10,000 mT, and pulp density of 2% used the L-4 machine. In RF experiments, optimal results showed 95.95% of iron recovered with 51.64 mass% grade using 1 kg/t of 1% alkaline starch as iron depressant and 1:1 mixture ratio of 0.75 kg/t DAA and NaOL as silica and alumina collectors. The designed multi-stage process involving feeding the concentrate from WHIMS into RF process reduced silica to 2.02 mass%, alumina to 1.04 mass% whilst recovering 81.94% of the iron with 67.27 mass% grade. As a result of this research, a process to produce high quality iron concentrate from hematite based low-grade iron ore with high iron recovery rate was constructed.

The treatment of black-odorous water using tower bipolar electro-flocculation including the removal of phosphorus,turbidity,sulfion,and oxygen enrichment

The large amount of municipal wastewater discharged into urban rivers sometimes exceeds the rivers’self-purification capacity leading to black-odorous polluted water.Electro-flocculation has emerged as a powerful remediation technology.Electro-flocculation in a bubble column tower with a bipolar electrode(BPE)was tested in an attempt to overcome the high resistance and weak gas-floatation observed with a monopolar electrode(MPE)in treating such water.The BPE reactor tested had a Ti/Ta2O_(5)-IrO_(2)anode and a graphite cathode with an iron or aluminum bipolar electrode suspended between them.It was tested for its ability to reduce turbidity,phosphate and sulphion and to increase the concentration of dissolved oxygen.The inclusion of the bipolar electrode was found to distinctly improved the system’s conductivity.The system’s electro-flocculation and electrical floatation removed turbidity,phosphate and sulphion completely,and the dissolved oxygen level improved from 0.29 to 6.28 mg/L.An aluminum bipolar electrode performed better than an iron one.Changes in the structure of the microbial community confirmed a significant improvement in water quality.