The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques ...The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques such as digital signal processing(DSP)systems are implemented to control motors.These systems are efficient but very expensive for certain applications.From this arises the need for a controller capable of handling AC and DC motors that improves efficiency and maintains low energy consumption.This project presents the design of an adaptive control system for brushless AC induction and DC motors,which is functional to any type of plant in the industry.The design was possible by implementing Matlab software and tools such as digital signal processor(DSP)and Simulink.Through an extensive investigation of the state of the art,three models needed to represent the control system have been specified.The first model for the AC motor,the second for the DC motor and the third for the DSP control;this is done in this way so that the probability of failure is lower.Subsequently,these models have been programmed in Simulink,integrating the three main models into one.In this way,the design of a controller for use in AC induction motors,specifically squirrel cage and brushless DC motors,has been achieved.The final model represents a response time of 0.25 seconds,which is optimal for this type of application,where response times of 2e-3 to 3 seconds are expected.展开更多
This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Se...This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Set Computer(RISC) architecture and DSP computation capability thoroughly, extends DSP with various addressing modes in a customized DSP pipeline stage architecture. The paper also discusses the architecture and circuit design of bypassing logic to fit MD32 architecture. The parallel execution of BPU with instruction decode in architecture level is applied to reduce time delay. The optimization of circuit that serial select with priority is analyzed in detail, and the result shows that about half of time delay is reduced after this optimization. Examples show that BPU is useful for improving the DSP's performance.The forwarding logic in MD32 realizes 8 data channels feedback and meets the working clock limit.展开更多
A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor （DSP） is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system ...A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor （DSP） is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system combines the merits of intelligent control with DSP digital control. The fuzzy logic intelligent control system designed is a typical two-input-single-output structure, and regards the error and the change in error of peak arc voltage as two inputs and the background time as single output. The fuzzy logic intelligent control system is realized in a look-up table （LUT） method by using MATLAB based fuzzy logic toolbox, and the implement of LUT method based on DSP is also discussed. The pulsed MAG welding experimental results demonstrate that the developed fuzzy logic intelligent control system based on DSP has strong arc length controlling ability to accomplish the stable pulsed MAG welding process and controls pulsed MAG welding inverter digitally and intelligently.展开更多
The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generatio...The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generation of testing procedures is giv en in terms of the processor presentation matrix between micro-operators and in structions of MCDSP.展开更多
In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied,...In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied, followed by thetechnology of digital signal processing DSP productionand application. In the field of logging, the applicationfunction of this technology plays a key role. It not onlyallows the imaging logging technology to be furtherdeveloped, but also enables fast and accurate processingof downhole signals. Therefore, among many loggingtools today, digital signal processing DSPs have beenwidely used, and their functions have been fullyutilized. This paper analyzes the application of signalprocessor DSP in logging instruments. It is hoped thatit can play a reference role in the good application anddevelopment of logging instruments.展开更多
Under the direction of design space theory,in this paper we discuss the design of a superscalar pipelining using the way of multiple issues,and the implement of a superscalar based RISC DSP architecture,SDSP.Furthermo...Under the direction of design space theory,in this paper we discuss the design of a superscalar pipelining using the way of multiple issues,and the implement of a superscalar based RISC DSP architecture,SDSP.Furthermore,in this paper we discuss the validity of instruction prefetch,the branch prediction,the depth of instruction window and other issues that can affect the performance of superscalar DSP.展开更多
A digital control of pulsed gas metal arc welding inverter was proposed. A control system consisting of analogue parts was replaced with a new digital control implemented in a TMS320LF2407A DSP chip. The design and co...A digital control of pulsed gas metal arc welding inverter was proposed. A control system consisting of analogue parts was replaced with a new digital control implemented in a TMS320LF2407A DSP chip. The design and constructional features of the whole digital control were presented. The resources of the DSP chip were efficiently utilized and the circuits are very concise, which can enhance the stability and reliability of welding inverter. Experimental results demonstrate that the developed digital control has the ability to accomplish the excellent pulsed gas metal arc welding process and the merits of the developed digital control are stable welding process, little spatter and perfect weld appearance.展开更多
国防科技大学自主研制的高性能加速器采用中央处理器(CPU)+通用数字信号处理器(GPDSP)的片上异构融合架构,使用超长指令集(VLIW)+单指令多数据流(SIMD)的向量化结构的GPDSP是峰值性能主要支撑的加速核。主流编译器在密集的数据计算指令...国防科技大学自主研制的高性能加速器采用中央处理器(CPU)+通用数字信号处理器(GPDSP)的片上异构融合架构,使用超长指令集(VLIW)+单指令多数据流(SIMD)的向量化结构的GPDSP是峰值性能主要支撑的加速核。主流编译器在密集的数据计算指令排布、为指令静态分配硬件执行单元、GPDSP特有的向量指令等方面不能很好地支持高性能加速器。基于低级虚拟器(LLVM)编译框架,在前寄存器分配调度阶段,结合峰值寄存器压力感知方法(PERP)、蚁群优化(ACO)算法与GPDSP结构特点,优化代价模型,设计支持寄存器压力感知的指令调度模块;在后寄存器分配阶段提出支持静态功能单元分配的指令调度策略,通过冲突检测机制保证功能单元分配的正确性,为指令并行执行提供软件基础;在后端封装一系列丰富且规整的向量指令接口,实现对GPDSP向量指令的支持。实验结果表明,所提出的LLVM编译架构优化方法从功能和性能上实现了对GPDSP的良好支撑,GCC testsuite测试整体性能平均加速比为4.539,SPEC CPU 2017浮点测试整体性能平均加速比为4.49,SPEC CPU 2017整型测试整体性能平均加速比为3.24,使用向量接口的向量程序实现了平均97.1%的性能提升率。展开更多
This paper presents an optimized implementation of the FDK algorithm on a single fixed-point TMS320C6455 digital signal processor （DSP）. Software pipelining and proper configuration of the data transfer enables a 25...This paper presents an optimized implementation of the FDK algorithm on a single fixed-point TMS320C6455 digital signal processor （DSP）. Software pipelining and proper configuration of the data transfer enables a 2563 volume to be reconstructed in about 42 seconds from 360 projections with very good accuracy. This implementation reveals the potential of modern high-performance DSPs in accelerating image reconstruction, especially when cost and power consumption are emphasized.展开更多
Satellite signal simulator for global navigation satellite system(GNSS)can evaluate the accuracy of capturing,tracing and positioning of GNSS receiver.It has significant use-value in the military and civil fields.The ...Satellite signal simulator for global navigation satellite system(GNSS)can evaluate the accuracy of capturing,tracing and positioning of GNSS receiver.It has significant use-value in the military and civil fields.The system adopts the overall design scheme of digital signal processor(DSP)and field-programmable gate array(FPGA).It consists of four modules:industrial control computer simulation software,mid-frequency signal generator,digital-to-analog(D/A)module and radio frequency(RF)module.In this paper,we test the dynamic performance of simulator using the dynamic scenes testing method,and the signal generated by the designed simulator is primarily validated.展开更多
With the continuous increasing of circuit scale, the problem of power consumption is paid much more attention than before, especially in large designs. In this paper, an experience of optimizing the power consumption ...With the continuous increasing of circuit scale, the problem of power consumption is paid much more attention than before, especially in large designs. In this paper, an experience of optimizing the power consumption of the 16-bit datapath in a 32-bit reconfigurable pipelined Digital Signal Processor (DSP) is introduced. By keeping the old input values and preventing the useless switching of the logic blocks on the datapath, the power consumption is much lowered. At the same time, by relocating some logic blocks between different pipeline stages and employing some data forward logics, a better balanced pipeline is achieved to lower the power consumption for conditional computation instructions at very low timing and area costs. The effectivity of these power optimization technologies are proved by the experimental results. Finally, some ideas about how to reduce the power consumption of circuits are proposed, which are very effective and useful in practice designs, especially in pipelined ones.展开更多
An important issue of ground-penetrating radar （GPR） signals analysis is de-noising thai is the guarantee of acquiring good detecting effect. The paper illustrates a successful application of digital single process...An important issue of ground-penetrating radar （GPR） signals analysis is de-noising thai is the guarantee of acquiring good detecting effect. The paper illustrates a successful application of digital single processor （DSP） based on wavelet shrinkage algorithm. In order to realize real-time GPP, signals analysis, some key issues are discussed such as the realization of fast wavelet transformation, the selection of CPU chip and the optimization of data movement. Experimenial results show that the DSP based application not only basically meets the real-time requirement of GPP, signals analysis, but also assures the quality of the GPR signals analysis.展开更多
This paper presents the design of a full-duplex multi-rate vocoder which implements an LPC-10, CELPC and VSELPC algorithms in real time. A single commercially available digital signal processor IC, the TMS320C25, is u...This paper presents the design of a full-duplex multi-rate vocoder which implements an LPC-10, CELPC and VSELPC algorithms in real time. A single commercially available digital signal processor IC, the TMS320C25, is used to perform the digital processing. The channel interfaces are configured with the design of ASIC, and including timing and control logic circuits.展开更多
文摘The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques such as digital signal processing(DSP)systems are implemented to control motors.These systems are efficient but very expensive for certain applications.From this arises the need for a controller capable of handling AC and DC motors that improves efficiency and maintains low energy consumption.This project presents the design of an adaptive control system for brushless AC induction and DC motors,which is functional to any type of plant in the industry.The design was possible by implementing Matlab software and tools such as digital signal processor(DSP)and Simulink.Through an extensive investigation of the state of the art,three models needed to represent the control system have been specified.The first model for the AC motor,the second for the DC motor and the third for the DSP control;this is done in this way so that the probability of failure is lower.Subsequently,these models have been programmed in Simulink,integrating the three main models into one.In this way,the design of a controller for use in AC induction motors,specifically squirrel cage and brushless DC motors,has been achieved.The final model represents a response time of 0.25 seconds,which is optimal for this type of application,where response times of 2e-3 to 3 seconds are expected.
基金Supported by the National High Technology Research & Development Program of China (863 Program) (2002AA1Z1140).
文摘This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Set Computer(RISC) architecture and DSP computation capability thoroughly, extends DSP with various addressing modes in a customized DSP pipeline stage architecture. The paper also discusses the architecture and circuit design of bypassing logic to fit MD32 architecture. The parallel execution of BPU with instruction decode in architecture level is applied to reduce time delay. The optimization of circuit that serial select with priority is analyzed in detail, and the result shows that about half of time delay is reduced after this optimization. Examples show that BPU is useful for improving the DSP's performance.The forwarding logic in MD32 realizes 8 data channels feedback and meets the working clock limit.
基金supported by National Natural Science Foundation of China(No.50375054)China Postdoctoral Science Foundation (No.20060400745).
文摘A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor （DSP） is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system combines the merits of intelligent control with DSP digital control. The fuzzy logic intelligent control system designed is a typical two-input-single-output structure, and regards the error and the change in error of peak arc voltage as two inputs and the background time as single output. The fuzzy logic intelligent control system is realized in a look-up table （LUT） method by using MATLAB based fuzzy logic toolbox, and the implement of LUT method based on DSP is also discussed. The pulsed MAG welding experimental results demonstrate that the developed fuzzy logic intelligent control system based on DSP has strong arc length controlling ability to accomplish the stable pulsed MAG welding process and controls pulsed MAG welding inverter digitally and intelligently.
文摘The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generation of testing procedures is giv en in terms of the processor presentation matrix between micro-operators and in structions of MCDSP.
文摘In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied, followed by thetechnology of digital signal processing DSP productionand application. In the field of logging, the applicationfunction of this technology plays a key role. It not onlyallows the imaging logging technology to be furtherdeveloped, but also enables fast and accurate processingof downhole signals. Therefore, among many loggingtools today, digital signal processing DSPs have beenwidely used, and their functions have been fullyutilized. This paper analyzes the application of signalprocessor DSP in logging instruments. It is hoped thatit can play a reference role in the good application anddevelopment of logging instruments.
文摘Under the direction of design space theory,in this paper we discuss the design of a superscalar pipelining using the way of multiple issues,and the implement of a superscalar based RISC DSP architecture,SDSP.Furthermore,in this paper we discuss the validity of instruction prefetch,the branch prediction,the depth of instruction window and other issues that can affect the performance of superscalar DSP.
基金Supported by National Natural Science Foundation of China ( No50375054)China Postdoctoral Science Foundation ( No20060400745)
文摘A digital control of pulsed gas metal arc welding inverter was proposed. A control system consisting of analogue parts was replaced with a new digital control implemented in a TMS320LF2407A DSP chip. The design and constructional features of the whole digital control were presented. The resources of the DSP chip were efficiently utilized and the circuits are very concise, which can enhance the stability and reliability of welding inverter. Experimental results demonstrate that the developed digital control has the ability to accomplish the excellent pulsed gas metal arc welding process and the merits of the developed digital control are stable welding process, little spatter and perfect weld appearance.
文摘国防科技大学自主研制的高性能加速器采用中央处理器(CPU)+通用数字信号处理器(GPDSP)的片上异构融合架构,使用超长指令集(VLIW)+单指令多数据流(SIMD)的向量化结构的GPDSP是峰值性能主要支撑的加速核。主流编译器在密集的数据计算指令排布、为指令静态分配硬件执行单元、GPDSP特有的向量指令等方面不能很好地支持高性能加速器。基于低级虚拟器(LLVM)编译框架,在前寄存器分配调度阶段,结合峰值寄存器压力感知方法(PERP)、蚁群优化(ACO)算法与GPDSP结构特点,优化代价模型,设计支持寄存器压力感知的指令调度模块;在后寄存器分配阶段提出支持静态功能单元分配的指令调度策略,通过冲突检测机制保证功能单元分配的正确性,为指令并行执行提供软件基础;在后端封装一系列丰富且规整的向量指令接口,实现对GPDSP向量指令的支持。实验结果表明,所提出的LLVM编译架构优化方法从功能和性能上实现了对GPDSP的良好支撑,GCC testsuite测试整体性能平均加速比为4.539,SPEC CPU 2017浮点测试整体性能平均加速比为4.49,SPEC CPU 2017整型测试整体性能平均加速比为3.24,使用向量接口的向量程序实现了平均97.1%的性能提升率。
文摘This paper presents an optimized implementation of the FDK algorithm on a single fixed-point TMS320C6455 digital signal processor （DSP）. Software pipelining and proper configuration of the data transfer enables a 2563 volume to be reconstructed in about 42 seconds from 360 projections with very good accuracy. This implementation reveals the potential of modern high-performance DSPs in accelerating image reconstruction, especially when cost and power consumption are emphasized.
基金Shanxi Provincial Science and Technology Research Fund(No.2012021013-6)
文摘Satellite signal simulator for global navigation satellite system(GNSS)can evaluate the accuracy of capturing,tracing and positioning of GNSS receiver.It has significant use-value in the military and civil fields.The system adopts the overall design scheme of digital signal processor(DSP)and field-programmable gate array(FPGA).It consists of four modules:industrial control computer simulation software,mid-frequency signal generator,digital-to-analog(D/A)module and radio frequency(RF)module.In this paper,we test the dynamic performance of simulator using the dynamic scenes testing method,and the signal generated by the designed simulator is primarily validated.
文摘With the continuous increasing of circuit scale, the problem of power consumption is paid much more attention than before, especially in large designs. In this paper, an experience of optimizing the power consumption of the 16-bit datapath in a 32-bit reconfigurable pipelined Digital Signal Processor (DSP) is introduced. By keeping the old input values and preventing the useless switching of the logic blocks on the datapath, the power consumption is much lowered. At the same time, by relocating some logic blocks between different pipeline stages and employing some data forward logics, a better balanced pipeline is achieved to lower the power consumption for conditional computation instructions at very low timing and area costs. The effectivity of these power optimization technologies are proved by the experimental results. Finally, some ideas about how to reduce the power consumption of circuits are proposed, which are very effective and useful in practice designs, especially in pipelined ones.
基金Supported by the National Natural Science Founda-tion of China (49984001)
文摘An important issue of ground-penetrating radar （GPR） signals analysis is de-noising thai is the guarantee of acquiring good detecting effect. The paper illustrates a successful application of digital single processor （DSP） based on wavelet shrinkage algorithm. In order to realize real-time GPP, signals analysis, some key issues are discussed such as the realization of fast wavelet transformation, the selection of CPU chip and the optimization of data movement. Experimenial results show that the DSP based application not only basically meets the real-time requirement of GPP, signals analysis, but also assures the quality of the GPR signals analysis.
文摘This paper presents the design of a full-duplex multi-rate vocoder which implements an LPC-10, CELPC and VSELPC algorithms in real time. A single commercially available digital signal processor IC, the TMS320C25, is used to perform the digital processing. The channel interfaces are configured with the design of ASIC, and including timing and control logic circuits.
