Ammonium Metavanadate Fabricated by Selective Precipitation of Impurity Chemicals on Inorganic Flocculants

High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detector and imaging,large scale energy storage system.NH_(4)VO_(3)is usually produced by spontaneous crystallization from the aqueous solution due to its sharp dependence of solubility on the temperature.However,hazardous chemicals in industrial effluent,include phosphorate,silicate and arsenate,causing severe damage to the environment.In this work,these impurities are selectively precipitated onto inorganic flocculants,while the vanadate dissolved in an aqueous solution keeps almost undisturbed.Therefore,high purity NH_(4)VO_(3)is produced by the crystallization from the purified solution.By screening various flocculants and precipitating parameters,polyaluminum sulfate with an optimal amount of 50 g/L,is demonstrated to selectively remove phosphorate,silicate and arsenate,corresponding to the removing efficiency of 93.39%,97.11%and 88.31%,respectively.NH_(4)VO_(3)from the purified solution holds a purity of 99.21%,in comparison with 98.33%in the product from the crude solution.This purifying technology cannot only produce NH_(4)VO_(3)with high added value,but also reduce the environmental pollution of waste liquid.

Screening of flocculant-producing microorganisms and flocculating activity

A strain saccharomycete STSM-1 with high flocculanting activity was isolated from activated sludge with conventional methods. The high production rate and the low cost STSM-1 medium was obtained by selecting different kinds of media, carbon source, nitrogen source and inorganic salt ion. The best flocculant-producing conditions were found by changing medium initial pH, culture temperature and ventilation flow. The best flocculating effect was obtained by changing positive ion types, density and concentration of flocculant.

Screening of Bioflocculant-Producing Strains and Characteristics of Microbial Flocculation

A high effective bioflocculant-producing strain named LB1 was isolated and screened from the leachate by routine micro- method. The strain was identified as genus Pseudomonas according to the morphologic and physiological-biochemical characteristics of the strain. The biological characteristics of the microbial flocculants produced by LB1 were investigated. The results show that the optimal production period of microbial flocculant using LB1 is 96 h; and the products, found in the fermentation liquor, comprise the extracellular organic matter （EOM） of LB1 generated during LB1 growth and the secondary metabolites in the anaphase of LB1. Meanwhile, the mycelia can improve the performance of the microbial flocculants. Because heat has a greater influence on the active substance in the microbial flocculants than other factors, the activity of the flocculants decreases with increasing temperature and the time of heating. The flocculants can flocculate mud-containing and melanin-containing wastewater effectively with a flocculation ratio of 85.1% and 92.2%, respectively. The optimal heating temperature varies from 20 to 45 ℃. When flocculating the two wastewater, the flocculating activity of the flocculants is above 57.7% and 70.9%, respectively, in a wide pH range from 3 to 11.

Microbial flocculant and its application in environmental protection

The microbial flocculant is a kind of natural bio polymer and has promising future to be used in the fermentation industry and wastewater treatment. It has been studied in details in many countries, such as U.S.A, Japan. This paper reviewed the development on microbial flocculant basic studies and applications, including flocculant production microorganisms, chemical and components of microbial flocculants, flocculation mechanism of microbial flocculants, capability of microbial flocculants and influence factors, and culture conditions for flocculant production. The application cases of microbial flocculants were also discussed.

A cleaner two-step synthesis of high purity diallyldimethylammonium chloride monomers for flocculant preparation

In order to improve the flocculation efficiency of polydiallyldimethylammonium chloride（PDADMAC）, high molecular weight PDADMAC should be prepared from high purity diallyldimethylammonium chloride（DADMAC） monomers. In this paper, a cleaner method with microwave irradiation and alkali solidification was proposed for preparing high pure DADMAC by selective heating under low temperature, and the prepared high purity DADMAC is characterized using FTIR and atomic absorption spectrometry. The new method provides a solution to the key technical problem of PDADMAC synthesis. Comparing with the conventional methods, the results showed that the advantages of the novel synthesis include： （a） high purity DADMAC is improved from 57% to 71% ; （b） reaction time of tertiary amine preparation is shortened from 6 h to 7 min; （c） water instead of acetone was used as reaction medium; （d） toxic by-products, wastewater and waste gas are eliminated. Flocculant made from the synthesized high purity DADMAC monomers was proved more efficient in flocculation tests.

Characteristics and Culture Conditions of a Bioflocculant Produced by Penicillium sp.

Objective To study the characteristics of a bioflocculant named MBF7 produced by Penicillum strain HHE-P7 and the effects of cultivation conditions on bioflocculant production. Methods The chemical group in the bioflocculant molecules was shown by Fourier transform infrared （FTIR） spectra, and the average molecular weight of MBF7 was estimated by gel permeation chromatography. The effects of medium components on bioflocculant production and flocculating activity were studied. Results Phospho-, amino-, hydroxyl, and carboxyl groups were the major fractions of MBF7, and the molecule weight was about 3.0 × 10^5 Da. In addition, the carbon and nitrogen sources favorable for the bioflocculant production were glucose and yeast extract respectively. When the initial pH of the medium was adjusted to 5.0, high flocculant efficiency could be achieved. Conclusion The bioflocculant MBF7 is a new macromolecule with high flocculating efficiency for Kaolin suspension, and could be produced under appropriate culture conditions.

Application of organic polymeric flocculants in centrifugal dewa-tering of oil refinery sludge

In order to evaluate the applicability of the organic polymeric flocculants(OPF) in the treatment of oil refinery sludge, experiments were conducted to show that OPF have better performance of flocculation than inorganic flocculants. Both the anionic and cationic OPF have satisfactory flocculation efficiency in oil sludge treatment, but the latter are more cost efficient. Among the over 20 types of flocculants tested, 2 OPF(CPAM 2 and HPAM 2) were selected as the treatment agents, based on their good treatment performances, oil resistance and economic feasibility. It was demonstrated in the industrial scale centrifugal dewatering experiments that the application of either CPAM 2 or HPAM 2 could achieve high treatment efficiency of the oil sludge dewatering and reduce the COD of centrifugal liquid to less than 1000 mg/L.

DMC-grafted cellulose as green-based flocculants for agglomerating fine kaolin particles

Novel cellulose based flocculants C-g-P(DMC) with various chain architectures are synthesized through a situ graft copolymerization. The cationic ammonium chloride group(DMC) is grafted onto cellulose by two separate inverse emulsion polymerization with γ-methacryloxypropyl trimethoxy silane(KH-570) and double bond addition reactions, which is a new and simple method to employ KH-570 as a bridge for the connection of cellulose matrix and DMC group. The effects of pH, flocculant dose, standing time on turbidity of kaolin suspensions and particle sizes have been studied systematically. In addition, the response surface methodology(RSM) study confirms that PAC and C-g-P(DMC)have synergy in turbidity removal with a higher removal efficiency of 98.32%. Moreover, C-g-P(DMC) 1 has higher removal efficiency with 96.5% at a low dosage of 0.6 mg L^(-1) and better floc properties than C-g-P(DMC) 2 and C-g-P(DMC) 3, suggesting that the length and quantity of cationic branch chains play a crucial role in Kaolin flocculation due to their dramatically enhanced bridging effects.

Experimental research on Phanerochaete chrysosporium as coal microbial flocculant

The flocculation effect of the Phanerochaete chrysosporium on the coal slurry were studied by orthogonal experimental method in this study.The results of research show that the P.chrysosporium has a good effect on flocculating coal slurry.The optimum combination of the experimental is the P.chrysosporium,which is cultured in 2 days,mixed with 2 mL coagulant and 2 mL broth.The flocculant is a broken liquid with pH value of 6.The hightest flocculation ratio is 93.5%.The result of FTIR shows that the biological extraction of P.chrysosporium contains a lot of acidic polysaccharides that has the effect on flocculation.Microbial flocculant molecules and particles of coal slurry could be flocculated by‘‘absorption bridge’’.

Application Research Status and Development Prospect of Microbial Flocculant

Microbial flocculant （MBF） is a kind of novel flocculant, which is widely used for the food industry, highly concentrated organic waste water treatment and the urban water supply technology. Due to its characteristics of superior flocculation effect, without secondary pollution to the environment and being easily degraded, MBF has been emerging as a hotspot of water treatment research in recent years. In this paper, the latest progress of the preparation of MBFs and the flocculating mechanism were presented. The practical application research of MBFs for water treatment was reviewed. Finally, suggestions and development prospect of research on MBFs were discussed.

Comparison of three flocculants for heavy cyanobacterial bloom mitigation and subsequent environmental impact

Cyanobacteria can accumulate as a heavy biomass on the leeward side of large eutrophic lakes,posing a potential threat to public health.The mitigating capacity of three flocculants and their potential impacts on the major environmental features of water and sediments was evaluated.Results indicate that polyaluminum chloride(PAC)and ferric chloride(FeCl)are efficient flocculants that can rapidly mitigate cyanobacterial blooms with chlorophyll-a concentrations higher tnan 1500 ug/L within 15 min.In comparison,cationic starch with chitosan could only treat cyanobacterial blooms in chlorophyll-a concentrations of less than 200μg/L.The addition of FeClcaused a decline in the pH value,while dissolved oxygen in the water column dropped to 2 mg/L during cationic starch with chitosan treatment for a high cyanobacterial biomass group.Thus,a combination of flocculants and oxygenators should be considered when treating high-concentration cyanobacterial blooms for emergency purposes.Additionally,the cell lysis of cyanobacteria caused by cationic starch with chitosan can result in an increase in total dissolved phosphorus and total dissolved nitrogen.Furthermore,the high accumlation of nutrients in sediments after the settling of cyanobacteria can cause high internal phosphorus pollution.The increase in the total organic carbon of the sediments can threaten lake restoration achieved by planting submerged macrophytes.

Screening and flocculating properties of bioflocculant-producing microorganisms

Screening of bioflocculant-producing microorganisms was carded out. A strain that secreted excellent bioflocculant was isolated from municipal sewage using the spread plate technique, identified as Klebsiella sp. by the analytical profile index （API） identification system, and named A9. Several important factors that had an effect on A9＇s bioflocculant-producing and flocculating activity were studied. A total of 4 g/L Kaolin suspension was used to measure the flocculating activity of the bioflocculant from A9. It was found that maltose and urea were Ag＇s best carbon and nitrogen sources, respectively, and the flocculating activity of the flocculating agent from A9 was markedly increased by the addition of trivalent cations such as Fe^3＋ and Al^3＋; furthermore, the bioflocculant produced by A9 was most effective when the pH value was 6.0.

Preparation and PerformanceAnalysis of Inorganic Polymer Flocculant PZFSiC

A new inorganic polymer flocculant-PZFSiC (zinc-iron-silicate polymer composite) is prepared by adding acid into a high modulus solution of water glass and introducing appropriate metallic ions(M) including Zn and Fe. The influence on flocculability of factors such as the mole ratios of M to SiO2,stirring time and pH are discussed .And the optimal preparing technical parameters are obtained by orthogonal tests. The optimum technical conditions of flocculation are determined. The result shows that when less PZFSiC is added into troubled water or waste water, turbidity removal can hit 98%, COD removal can exceed 93%. The water sample treated is clear and of good quality. These results also indicate that PZFSiC is a highly effective, nontoxic and benign to the enviroment.

Electrokinetic characteristic and coagulation behavior of flocculant polyaluminum silicate chloride (PASiC)

The electrokinetic characteristics and coagulation behaviors of polyaluminum silicate chloride (PASiC) and polyaluminum chloride (PAC) were studied and compared by streaming current (SC) measurement and jar test method. The experimental results showed that the interaction between polysilicic acid characterized negative charge and hydrolyzed aluminum species result in a decrease of the charge neutralizing ability of PASiC, compared to PAC. The decrease has a close relationship with the basicity ( B ) and Al/Si molar ratio in PASiC. The less the B value and the Al/Si molar ratio, the lower the charge neutralizing ability of PASiC is. In contrast, the preparation technique for PASiC affects the charge-neutralization of PASiC to a smaller extent. In addition, compared with PAC, PASiC may enhance aggregating efficiency and give better coagulating effects.

Screening of Bioflocculant-Producing Strain by Ion Implantation and Flocculating Characteristics of Bioflocculants

A bioflocculant-producing mutator strain, NIM-192, was screened out through nitrogen ion implanting into F J-7 strain. The results showed that NIM-192 had good genetic stability and high flocculating activity, and the flocculating rate increased by 34.26% than that of the original. Sucrose, complex nitrogen source contained yeast extract, urea and pH 7.0～ 9.0 were chosen as the best carbon source, nitrogen source and initial solution pH for bioflocculant production, respectively. The bioflocculant kept high and stable flocculating activity at alkalinous reaction mixture with a pH beyond 7.0, while the flocculating activity was remarkably reduced when the reaction pH was lower than 7.0. Addition of many cations could obviously increase the flocculating rate, among which Ca^2＋ demonstrated the best effect. The bioflocculant had very strong acid-base stability and thermo-stability.The flocculating rate kept over 86% when pH of the bioflocculant was in a range of 3.0 ～ 12.0, and the change of flocculating activity was not great when heated at 100℃ for 60 rain.

Flocculating Properties and Production of the Compound Bioflocculant by Rhizobium Radiobacter F2 and Bacillus Sphaeicus F6

A compound bioflocculant CBF,produced by mixed culture of Rhizobium radiobacter F2 and Bacillus sphaeicus F6, was investigated with regard to its production and flocculating properties. The optimization of the culture medium constituents including carbon source,nitrogen source and C / N ratio,metal ions and ionic strength on CBF production were studied. Flocculating properties of CBF were examined by a series of experiments and CBF had good flocculating activities in kaolin suspension with divalent cations and stable over wide range of p H. Studies of the flocculating properties revealed that the flocculation could be stimulated by cations Ca2+,Mg2+,Fe2+,Al3+and Fe3+. In addition,it was stable at 4-30 ℃ in the presence of Ca Cl2. It was found to be effective for flocculation of a kaolin suspension under neutral and weak alkaline conditions( p H 7. 0- 9. 0),and flocculating activities of higher than 95% were obtained when the CBF concentrations among 6- 14 mg / L at p H 8. 0. The results of this study indicate that CBF is a potential replacement of conventional synthetic flocculants and is widely applied in water treatment and downstream processing of food and fermentation industries.

nSrDNA Appraisal of High Yield Flocculant Compound Bacteria and Their Application Effect

High effect flocculant compound bacteria were screened out with the product bacteria of flocculant in soil. Their system appraising study shows that two were actionomyces and the other was microzyme among the three bacteria. According to nSrDNA, the three bacteria were marked at a molecule level and the system growth tree was established, ensuring the position of compound bacteria at the molecule level. The purificant which was made of the compound bacteria has spreading value because of its excellent clearing effect for organic and inorganic polluted water.

A critical review on flocculants and flocculation

The article critically reviews the applications of biopolymers in the area of water treatment. A number of biopolymers were reported for their flocculation behavior for treating the wastewater and making it suitable for various industrial as well as agricultural purposes via chemical alteration onto its backbone. Wastewater treatment was followed by flocculation process using standard ‘Jar test protocol’. Minute quantities of dosage were found be ideal to diminish the organic, biological and suspended loads from wastewater sample. The process of flocculation using biopolymers was also found economically suitable compared to other various processes applied in water treatment.

Phosphate Sorption in Water by Several Cationic Polymer Flocculants

Although inorganic phosphate is an essential plant nutrient, elevated levels in surface waters lead to adverse effects in the environment. These effects are attributed to runoff from rain or irrigation events that may cause the sorbed phosphate to be transported from the application sites and to move into neighboring watersheds. Increased phosphate concentration in watersheds may lead to a variety of environmental problems including increased algal blooms, bacterial contamination, and in some cases eutrophication. To overcome these effects, polymer flocculants have been shown to reduce the phosphate concentration in water by removing suspended solids and thereby removing the phosphate sorbed to the solids. The purpose of this study is to determine the amount, if any, of phosphate removed by several commercial polymers. The polymers chosen include the polyacrylamides Magnifloc 494C, Magnifloc 985N and Poly (diallyldimethyl ammonium chloride) (Poly (DADMAC)). Using these polymers, it is discovered that the positive charge density of the polymers affects the amount of phosphate removed from solution with Poly (DADMAC) (having 100% positive charge density) removing 40% of the phosphate from a solution containing 10 ppm phosphate.

Flocculation performance and mechanism of hydroxamate flocculants on synthetic hematite or goethite suspension

Suitable amounts of Al(OH)3, Na OH and synthetic hematite or goethite were taken to be digested under the simulated condition of the Bayer process and subsequently diluted with simulative Bayer red mud lotion, then the synthetic hematite or goethite suspension was obtained. The flocculation effect of self-made modified poly(acrylic acids) flocculants containing hydroxamic acid groups(abbreviated as HPAA) on the synthetic hematite or goethite suspension was studied. The experimental results show that with the increase of the dosages of added flocculants, the average settling rate of the synthetic hematite or goethite suspension in the first 1min speeds up, the supernatant solids decrease. It could also be found that there is generally a decrease in the average settling rate of the synthetic hematite or goethite suspension in the first 1 min with increasing solid content of the suspension. When the solid content of hematite or goethite of the suspension is 50 g/L with 240 g/t dosage of HPAA, HPAA has a better flocculation effect on the synthetic goethite suspension than on the synthetic hematite suspension. The adsorption mechanism of HPAA on the surface of hematite or goethite was investigated by Fourier transform infrared spectroscopy(FT-IR) and X-ray photoelectron spectroscopy(XPS).All the results suggest that HPAA is adsorbed on the hematite or goethite surface by a chemisorption, and it has a stronger adsorption on the goethite surface than on the hematite surface.