Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s d...Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s dimensional accuracy. This paper is a continuation of our earlier work, which aimed to analyze the effect of the internal temperature of a machine tool as the machine is put into operation and vary the external temperature, the machine floor temperature. Some experiments are carried out under controlled conditions to study how machine tool components get heated up and how this heating up affects the machine’s accuracy due to thermally induced deviations. Additionally, another angle is added by varying the machine floor temperature. The parameters mentioned above are explored in line with the overall thermal stability of the machine tool and its dimensional accuracy. A Robodrill CNC machine tool is used. The CNC was first soaked with thermal energy by gradually raising the machine floor temperature to a certain level before putting the machine in operation. The machine was monitored, and analytical methods were deplored to evaluate thermal stability. Secondly, the machine was run idle for some time under raised floor temperature before it was put into operation. Data was also collected and analyzed. It is observed that machine thermal stability can be achieved in several ways depending on how the above parameters are joggled. This paper, in conclusion, reinforces the idea of machine tool warm-up process in conjunction with a carefully analyzed and established machine floor temperature variation for the approximation of the machine tool’s thermally stability to map the long-time behavior of the machine tool.展开更多
The method of singular coefficient of water inrush to achieve safety mining has limitation and one sidedness. Aiming at the problem above, large amounts of data about water inrush were collected. Then the data, includ...The method of singular coefficient of water inrush to achieve safety mining has limitation and one sidedness. Aiming at the problem above, large amounts of data about water inrush were collected. Then the data, including the maximum water inrush, water inrush coefficient and water abundance in aquifers of working face, were processed by the statistical analysis. The analysis results indicate that both water inrush coefficient and water abundance in aquifers should be taken into consideration when evaluating the danger of water inrush from coal seam floor. The prediction model of safe-mining evaluation grade was built by using the support vector machine, and the result shows that this model has high classification accuracy. A feasible classification system of water-inrush safety evaluation can be got by using the data visualization method which makes the implicit support vector machine models explicit.展开更多
The management of information flow for production improvement has always been a target in the research. In this paper, the focus is on the analysis model of the characteristics of information flow in shop floor operat...The management of information flow for production improvement has always been a target in the research. In this paper, the focus is on the analysis model of the characteristics of information flow in shop floor operations based on the influence that dimension (support or medium), direction and the quality information flow have on the value of information flow using machine learning classification algorithms. The obtained results of classification algorithms used to analyze the value of information flow are Decision Trees (DT) and Random Forest (RF) with a score of 0.99% and the mean absolute error of 0.005. The results also show that the management of information flow using DT or RF shows that, the dimension of information such as digital information has the greatest value of information flow in shop floor operations when the shop floor is totally digitalized. Direction of information flow does not have any great influence on shop floor operations processes when the operations processes are digitalized or done by operators as machines.展开更多
文摘Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s dimensional accuracy. This paper is a continuation of our earlier work, which aimed to analyze the effect of the internal temperature of a machine tool as the machine is put into operation and vary the external temperature, the machine floor temperature. Some experiments are carried out under controlled conditions to study how machine tool components get heated up and how this heating up affects the machine’s accuracy due to thermally induced deviations. Additionally, another angle is added by varying the machine floor temperature. The parameters mentioned above are explored in line with the overall thermal stability of the machine tool and its dimensional accuracy. A Robodrill CNC machine tool is used. The CNC was first soaked with thermal energy by gradually raising the machine floor temperature to a certain level before putting the machine in operation. The machine was monitored, and analytical methods were deplored to evaluate thermal stability. Secondly, the machine was run idle for some time under raised floor temperature before it was put into operation. Data was also collected and analyzed. It is observed that machine thermal stability can be achieved in several ways depending on how the above parameters are joggled. This paper, in conclusion, reinforces the idea of machine tool warm-up process in conjunction with a carefully analyzed and established machine floor temperature variation for the approximation of the machine tool’s thermally stability to map the long-time behavior of the machine tool.
基金Financial supports for this work, provided by National Natural Key Science Foundation of China (No. 50539080)Ministry of Education Research Fund for the doctoral program of China (No. 20133718110004)+2 种基金the Natural Science Key Foundation of Shandong Province of China (No. ZR2011EEZ002)the Technology Project Development Plan of Qingdao Economic and Technological Development Zone of China (No. 2013-1-62)SDUST Research Fund of China (No. 2012KYTD101)
文摘The method of singular coefficient of water inrush to achieve safety mining has limitation and one sidedness. Aiming at the problem above, large amounts of data about water inrush were collected. Then the data, including the maximum water inrush, water inrush coefficient and water abundance in aquifers of working face, were processed by the statistical analysis. The analysis results indicate that both water inrush coefficient and water abundance in aquifers should be taken into consideration when evaluating the danger of water inrush from coal seam floor. The prediction model of safe-mining evaluation grade was built by using the support vector machine, and the result shows that this model has high classification accuracy. A feasible classification system of water-inrush safety evaluation can be got by using the data visualization method which makes the implicit support vector machine models explicit.
文摘The management of information flow for production improvement has always been a target in the research. In this paper, the focus is on the analysis model of the characteristics of information flow in shop floor operations based on the influence that dimension (support or medium), direction and the quality information flow have on the value of information flow using machine learning classification algorithms. The obtained results of classification algorithms used to analyze the value of information flow are Decision Trees (DT) and Random Forest (RF) with a score of 0.99% and the mean absolute error of 0.005. The results also show that the management of information flow using DT or RF shows that, the dimension of information such as digital information has the greatest value of information flow in shop floor operations when the shop floor is totally digitalized. Direction of information flow does not have any great influence on shop floor operations processes when the operations processes are digitalized or done by operators as machines.
