Because of the low grade, high oxidation rate and the accumulation of little associated metal sulfide ore in the molybdenum concentrate during flotation, the Qingyang molybdenum ore is difficult to beneficiate. The ex...Because of the low grade, high oxidation rate and the accumulation of little associated metal sulfide ore in the molybdenum concentrate during flotation, the Qingyang molybdenum ore is difficult to beneficiate. The experimental studies of grinding fineness, the amount of roughing modifier, depressant and collector were completed. In the cleaning process, the contrast experiments of one regrinding, the regrinding and scrubbing, two-stage regrinding was carried. The result shows that the grade of molybdenum ore concentrate is 45.31%, the recovery is 65.98% and the rich ore ratio reaches 20.59% by the regrinding and scrubbing seven cleaning, the regrinding of concentrations from middling of molybdenum-sulfur separation. The regularly-concentrated material from the apparatus was as the middling products. Hence, ideal beneficiation index can be obtained with a rational mineral processing, which offers new beneficiating technology for the refractory low-grade molybdenum ore in China.展开更多
In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb a...In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb and As, respectively, remained in the final tailings and only about 28% of the total Au remained for further cyanidation processes. On the other hand, in bulk method of flotation the maximum Au recovery of 90.6% achieved after 60 min of flotation at the grind size with K80 of 146 micron. In addition, the bulk flotation method resulted in the concentrate with low concentrations of Sb and As elements. To improve the recovery of low-grade refractory gold ores, flotation should be followed by roasting, biological, or pressure oxidation processes so that the gold could be liberated prior to cyanidation processes. It is also found that the pressure oxidation pre-treatment of the concentrates prior to cyanidation may yield high gold recoveries of over than 83%. In these processes, recoveries are controlled by the temperature and the oxygen partial pressure in the solvent. However, by utilizing the bio-oxidation technique, the oxidation of sulfur to sulfate cannot be completed and, consequently, the gold recovery may be limited to only 72.2%.展开更多
基金financial support from the National Natural Science Foundation of China (Nos. 50921002 and 51174203)
文摘Because of the low grade, high oxidation rate and the accumulation of little associated metal sulfide ore in the molybdenum concentrate during flotation, the Qingyang molybdenum ore is difficult to beneficiate. The experimental studies of grinding fineness, the amount of roughing modifier, depressant and collector were completed. In the cleaning process, the contrast experiments of one regrinding, the regrinding and scrubbing, two-stage regrinding was carried. The result shows that the grade of molybdenum ore concentrate is 45.31%, the recovery is 65.98% and the rich ore ratio reaches 20.59% by the regrinding and scrubbing seven cleaning, the regrinding of concentrations from middling of molybdenum-sulfur separation. The regularly-concentrated material from the apparatus was as the middling products. Hence, ideal beneficiation index can be obtained with a rational mineral processing, which offers new beneficiating technology for the refractory low-grade molybdenum ore in China.
文摘In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb and As, respectively, remained in the final tailings and only about 28% of the total Au remained for further cyanidation processes. On the other hand, in bulk method of flotation the maximum Au recovery of 90.6% achieved after 60 min of flotation at the grind size with K80 of 146 micron. In addition, the bulk flotation method resulted in the concentrate with low concentrations of Sb and As elements. To improve the recovery of low-grade refractory gold ores, flotation should be followed by roasting, biological, or pressure oxidation processes so that the gold could be liberated prior to cyanidation processes. It is also found that the pressure oxidation pre-treatment of the concentrates prior to cyanidation may yield high gold recoveries of over than 83%. In these processes, recoveries are controlled by the temperature and the oxygen partial pressure in the solvent. However, by utilizing the bio-oxidation technique, the oxidation of sulfur to sulfate cannot be completed and, consequently, the gold recovery may be limited to only 72.2%.
