Investigation of Changes in Flow Parameters along the Transport Line in Installations for Pneumatic Transport of Cotton

The article presents the results of a study of changes in the parameters of the flow, velocity and pressure of air along the cotton transportation line in pneumatic transport installations and their dependence on the parameters of the pipeline. The purpose of the research is to theoretically substantiate the choice of the pipeline diameter depending on the properties of the material (cotton), the required processing capacity and pipeline throughput. In the research, an analytical method was used to study changes in the pressure of the air flow along the transportation line at different pipeline diameters. It is established that, according to the existing calculation method, the flow pressure along the transportation line is reduced to zero. At the same time, various scientists have proposed various analytical and empirical dependencies, which, in turn, give different ideas about the resistance of the inner surface of the pipes to the movement of air and material flow and do not describe the real situation, especially when transporting material from a long distance. This requires in-depth theoretical and applied research to establish real patterns of changes in flow parameters along the material (cotton) transportation line.

Relationship between ultrasound parameters of the umbilical and middle cerebral arteries and intrauterine fetal distress

BACKGROUND By comprehensively analyzing the blood flow parameters of the umbilical and middle cerebral arteries,doctors can more accurately identify fetal intrauterine distress,as well as assess its severity,so that timely interventions can be implemented to safeguard the health and safety of the fetus.AIM To identify the relationship between ultrasound parameters of the umbilical and middle cerebral arteries and intrauterine distress.METHODS Clinical data of pregnant women admitted between January 2021 and January 2023 were collected and divided into the observation and control groups(n=50 each),according to the presence or absence of intrauterine distress.The ultrasound hemodynamic parameters of the uterine artery(UtA),fetal middle cerebral artery(MCA),and umbilical artery(UmA)were compared with neonatal outcomes and occurrence of intrauterine distress in the two groups.RESULTS Comparison of ultrasonic hemodynamic parameters,resistance index(RI),pulsatility index(PI),and systolic maximal blood flow velocity of UmA compared to diastolic blood flow velocity(S/D),revealed higher values of fetal MCA,PI,and S/D of UmA in pregnant women with UtA compared to controls(P<0.05),while there was no difference between the two groups in terms of RI(P<0.05)The incidence of a neonatal Apgar score of 8-10 points was lower in the observation group(66.7%)than in the control group(90.0%),and neonatal weight(2675.5±27.6 g)was lower than in the control group(3117.5±31.2 g).Further,cesarean section rate was higher in the observation group(70.0%)than in the control group(11.7%),and preterm labor rate was higher in the observation group(40.0%)than in the control group(10.0%).The incidence of fetal distress,neonatal growth restriction and neonatal asphyxia were also higher in the observation group(all P<0.05).CONCLUSION Fetal MCA,UmA,and maternal UtA hemodynamic abnormalities all develop in pregnant women with intrauterine distress during late pregnancy,which suggests that clinical attention should be paid to them,and monitoring should be strengthened to provide guidance for clinical intervention.

Predicting Endometrium Receptivity with Parameters of Spiral Artery Blood Flow

In order To evaluate whether the parameters of spiral artery blood flow, as measured by transvaginal color Doppler, may be used to assess endometrium receptivity prior to embryo transfer (ET), a retrospective study of 94 infertile women who had undergone ART treatments with different outcomes (pregnant or nonpregnant) was done. Subendometrial blood flow was evaluated. The resistance index (RI), systolic/diastolic ratio (S/D) and pulsatility index (PI) were significantly lower in those who achieved pregnancy as compared with those who did not: 0.62±0.04 vs 0.68±0.04 (P<0.001), 2.66±0.33 vs 3.19±0.39 (P<0.01) and 1.15±0.17 vs 1.34±0.22 (P<0.05), respectively. Furthermore, when RI>0.72, PI>1.6, and S/D>3.6, no pregnancy occurred. These data suggest that the parameters of spiral artery blood flow could be used as a new assay in predicting endometrial receptivity before ET.

Rheological Behaviour for Polymer Melts and Concentrated SolutionsPart Ⅱ: Material Function with Nagai Chain Constraints and Determination of Their Parameters from Flow Curves

An integral constitutive equation and a set of material functions for describing the strain history of polymer melts were formulated in terms of the Cauchy-Green and Finger tensors. A simple memory function and the dependence of ηo and τt on M3.4 were derived from the theory of non-linear viscoelasticity with constraints of entanglements for polymer melts and substituted into the Oldroye-Walters-Fredickson constitutive equation. An integral constitutive equation for polymer melts was consequently obtained. Some material functions of the constitutive equation related to certain 'test flow' are examined as follows : (1) simple steady shear flow; (2) steady elongation flow; (3) small-amplitude oscillatory shear flow; (4) stress growth upon the inception of steady shear elongation flow; (5) stress relaxation (modulus and compllance). These theoretical relations for simple steady shear flow were compared with experimental data from our laboratory and references for various polymer melts and concentrated solutions. A good agreement between the theory and experiment was achieved.

Non-Aligned Stagnation Point Flow of a Casson Fluid Past a Stretching Sheet in a Doubly Stratified Medium

This paper investigates the problem of oblique hydro magnetic stagnation point flow of an electrically conducting Casson fluid over stretching sheet embedded in a doubly stratified medium in the presence of thermal radiation and heat source/absorption with first order chemical reaction.It is assumed that the fluid impinges on the wall obliquely.Similarity variables were used to convert the partial differential equations to ordinary differential equations.The transformed ordinary differential equations are solved numerically using Runge-Kutta-Fehlberg method with shooting technique.It is observed that a boundary layer is formed when the stretching velocity of the surface is less than the in viscid free stream velocity at a point decreases with increase in the non-Newtonian rheology parameter.The augmentation of the temperature is observed with the magnetic parameter,heat source parameter and thermal radiation parameter while a reverse effect with thermal stratification number,Prandtl number and the velocity ratio parameter.Influence of Skin friction coefficient,Nusselt number and Sherwood number on the flow configurations for different values of pertinent parameters are portrayed graphically and discussed.Numerical results are compared with the published results and are found to be in good agreement with previously published results as special cases of present problem.The mass concentration is seen to be decrease with Schmidt number,chemical reaction parameter and solutal stratification number.

Fast determination of meso-level mechanical parameters of PFC models

To solve the problems of blindness and inefficiency existing in the determination of meso-level mechanical parameters of particle flow code (PFC) models, we firstly designed and numerically carried out orthogonal tests on rock samples to investigate the correlations between macro-and meso-level mechanical parameters of rock-like bonded granular materials. Then based on the artificial intelligent technology, the intelligent prediction systems for nine meso-level mechanical parameters of PFC models were obtained by creating, training and testing the prediction models with the set of data got from the orthogonal tests. Lastly the prediction systems were used to predict the meso-level mechanical parameters of one kind of sandy mudstone, and according to the predicted results the macroscopic properties of the rock were obtained by numerical tests. The maximum relative error between the numerical test results and real rock properties is 3.28% which satisfies the precision requirement in engineering. It shows that this paper provides a fast and accurate method for the determination of meso-level mechanical parameters of PFC models.

STUDY OF A DIVICE ON THE WATCH FOR PARAMETER OF BLOOD PRESSURE AND ITS FLOW BY UNDAMAGED METHOD

ＳＴＵＤＹＯＦＡＤＩＶＩＣＥＯＮＴＨＥＷＡＴＣＨＦＯＲＰＡＲＡＭＥＴＥＲＯＦＢＬＯＯＤＰＲＥＳＳＵＲＥＡＮＤＩＴＳＦＬＯＷＢＹＵＮＤＡＭＡＧＥＤＭＥＴＨＯＤＳＴＵＤＹＯＦＡＤＩＶＩＣＥＯＮＴＨＥＷＡＴＣＨＦＯＲＰＡＲＡＭＥＴＥＲＯＦＢＬＯＯＤＰＲＥＳ...

Effect of structure parameters of the flow guide vane on cold flow characteristics in trapped vortex combustor

The cold flow characteristics are investigated to show the effect of the structural parameters of the flow guide vane on the trapped vortex combustor（TVC）. The results show that the structural parameters have significant effects on the TVC. As a/ H increases, the total pressure loss, the wall shear stress at the bottom of the cavity and the turbulent intensity in the main combustion zone increase. b/ B does not have a significant effect on the cavity flow structure and the total pressure loss, and the wall shear stress at the bottom of the cavity increases as b/ B increases. There is no significant increase of the turbulent intensity with the increase of b/ B. The increase of c/ L has little effect on the total pressure loss, and it is not conducive to a stable combustion. As c/ L increases, the wall shear stress at the bottom of the cavity decreases. When a/ H= 0.4, b/ B= 0.4, c/ L= 0.1, a desirable dual-vortex structure is formed with an acceptable pressure loss to achieve a stable combustion. Moreover, to ascertain that the flame is stable for different values of Vm a with the optimal structural parameters, the effect of Vm a on the flow field is discussed. Results suggest that the dual-vortex structure has no relationship with the increase of Vm a. Furthermore, an unsteady simulation is conducted to show the generation and the development of the dual-vortex.

Resonance analysis of single DOF parameter-varying system of magnetic-liquid double suspension bearing

Magnetic-liquid double suspension bearing(MLDSB)is mainly supported by electromagnetic suspension and supplemented by hydrostatic supporting.Its bearing capacity and stiffness can be greatly improved,and then it is suitable for the occasions of medium speed,heavy load.When the bearing system is excited by periodic force,the flow q and current i regulated by the double-closed-loop control mechanism change periodically.Then the risk of parametric resonance in MLDSB is greatly aggravated by the change of the parameter system,which seriously affects its operation stabil-ity and reliability.Therefore,this paper intends to study the resonance characteristics of the parame-ter system of MLDSB.Firstly,Marshall-Duffing equation of the parametric system is established by taking the flow q and the current i as variables respectively.Then,by using the asymptotic method,the occurrence condition and variation rule of the principal,1/2 Harmonic and 1/3 Harmonic para-metric resonance are solved.The results show that only the 1/2 Harmonic resonance of the flow q parameter varying system occurs accompanied by the resonance condition of high frequency.The principal,1/2 Harmonic and 1/3 Harmonic parametric resonance of the current i occur accompanied by the resonance condition of high frequency.And the 1/2 Harmonic resonance of the current i oc-curs accompanied by the non-single value bifurcation and dynamic bifurcation.The paper can pro-vide theoretical reference for the parameter design and stable operation of MLDSB.

π-J/ψ correlation and elliptic flow parameter v_2 of charmed mesons at RHIC energy

We study the correlation between the trigger π and the associated J/ψ on near and away sides in Au＋Au collisions at sNN^（1/2） = 200 GeV. In the region of trigger momentum pt 〉 4 GeV/c, the π spectrum is composed of thermal-shower and shower-shower recombinations in the frame work of the recombination model. We consider the azimuthal anisotropy in the quenched hard parton distribution and then calculate the elliptic flow parameter v2 of charmed mesons （J/ψ, D0 and Ds） for different centralities.

Hot Deformation Behavior of P92 Steel Used for Ultra-Super-Critical Power Plants

Hot compression tests of P92 steel at temperatures in the range of 1 173 to 1 523 K and at strain rates in the range of 0.1 to 10 s^-1 were carried out on a Gleeble-3500 thermal-mechanical simulator, and the corresponding flow curves were measured. The results showed that the flow stress and the peak strain increase with decreasing deformation temperature and increasing strain rate. The critical Z value, below which the complete dynamic reerystallization may occur, was determined to have 4.61 × 10^18. The hot deformation activation energy of the steel was about 437 kJ/mol. The hot deformation equation and the microstructure diagram of P92 steel were obtained. For the convenience of the practical application, the empirical equation for the peak stress can be described as σp=17. 17lnε＋902499/T-524.1.