Analysis of periodic pulsating nanofluid flow and heat transfer through a parallel-plate channel in the presence of magnetic field

In this paper,we focus on the two-dimensional pulsating nanofluid flow through a parallel-plate channel in the presence of a magnetic field.The pulsating flow is produced by an applied pressure gradient that fluctuates with a small amplitude.A kind of proper transformation is used so that the governing equations describing the momentum and thermal energy are reduced to a set of non-dimensional equations.The analytical expressions of the pulsating velocity,temperature,and Nusselt number of nanofluids are obtained by the perturbation technique.In the present study,the effects of the Cu-H2O and Al_(2)O_(3)-H2O nanofluids on the flow and heat transfer in pulsating flow are compared and analyzed.The results show that the convective heat transfer effect of Cu-H2O nanofluids is better than that of Al_(2)O_(3)-H2O nanofluids.Also,the effects of the Hartmann number and pulsation amplitude on the velocity,temperature,and Nusselt number are examined and discussed in detail.The present work indicates that increasing the Hartmann number and pulsation amplitude can enhance the heat transfer of the pulsating flow.In addition,selecting an optimal pulsation frequency can maximize the convective heat transfer of the pulsating flow.Therefore,improved understanding of these fundamental mechanisms is conducive to the optimal design of thermal systems.

Three-dimensional human thermoregulation model based on pulsatile blood flow and heating mechanism

A three-dimensional thermoregulation mathematical model of temperature fluctuations for the human body is developed based on predecessors＇ thermal models. The following improvements are necessary in real situations： ellipsoids and elliptical cylinders are used to adequately approximate body geometry, divided into 18 segments and five layers; the core layer consists of the organs; the pulsation of the heart cycle, the pulsatile laminar flow, the peripheral resistance, and the thermal effect of food are considered. The model is calculated by adopting computational fluid dynamics（CFD） technology, and the results of the model match with the experimental data. This paper can give a reasonable explanation for the temperature fluctuations.

材料特性对输送脉动流体的粘弹性轴向功能梯度管非线性动力行为的影响

The nonlinear dynamic behaviors of viscoelastic axially functionally graded material(AFG)pipes conveying pulsating internal flow are very complex.And the dynamic behavior will induce the failure of the pipes,and research of vibration and stability of pipes becomes a major concern.Considering that the elastic modulus,density,and coefficient of viscoelastic damping of the pipe material vary along the axial direction,the transverse vibration equation of the viscoelastic AFG pipe conveying pulsating fluid is established based on the Euler-Bernoulli beam theory.The generalized integral transform technique(GITT)is used to transform the governing fourth-order partial differential equation into a nonlinear system of fourth-order ordinary differential equations in time.The time domain diagram,phase portraits,Poincarémap and power spectra diagram at different dimensionless pulsation frequencies,are discussed in detail,showing the characteristics of chaotic,periodic,and quasi-periodic motion.The results show that the distributions of the elastic modulus,density,and coefficient of viscoelastic damping have significant effects on the nonlinear dynamic behavior of the viscoelastic AFG pipes.With the increase of the material property coefficient k,the transition between chaotic,periodic,and quasi-periodic motion occurs,especially in the high-frequency region of the flow pulsation.

Nonlinear Dynamics of Viscoelastic Pipe Conveying Pulsating Fluid Subjected to Base Excitation

Based on the Euler-Bernoulli beam theory and Kelvin-Voigt model,a nonlinear model for the transverse vibration of a pipe under the combined action of base motion and pulsating internal flow is established.The governing partial differential equation is transformed into a nonlinear system of fourth-order ordinary differential equations by using the generalized integral transform technique(GITT).The effects of the combined excitation of base motion and pulsating internal flow on the nonlinear dynamic behavior of the pipe are investigated using a bifurcation diagram,phase trajectory diagram,power spectrum diagram,time-domain diagram,and Poincare map.The results show that the base excitation amplitude and frequency significantly affect the dynamic behavior of the pipe system.Some new resonance phenomena can be observed,such as the period-1 motion under the base excitation or the pulsating internal flow alone becomes the multi-periodic motion,quasi-periodic motion or even chaotic motion due to the combined excitation action.

Advancing electrochemical drilling process via coupling of flow field and electric field in pulsating state generated by a novel tube tool

This paper introduces an improvement to electrochemical drilling process by coupling flow field and electric field in pulsating state. A novel tube with half-wedged shape at the end(HW-tube) is prepared, with both sidewall and wedged part of the HW-tube insulated. Only the flat part is utilized to provide electric field for electrochemical drilling. By rotating the HW-tube, both flow field and electric field in pulsating state are generated, alternating in different positions within the inter-electrode gap(IEG). The pulsating flow field enhances the mass transfer process, while pulsating electric field disperses material dissolution process and distribution of electrolytic byproducts. Both pulsating fields are coupled at the same frequency, further enhancing the electrochemical drilling process. Simulation results indicate that both flow field and electric field in pulsating state are generated. Compared to the traditional tube, the HW-tube significantly reduces the number of residual particles in IEG, and this number is further reduced by increasing the rotation speed. Experimental results reveal that the surface quality and dimensional uniformity of small hole are improved with HW-tube. With feed rate of 2.22 mm/min, a small hole with diameter of 1.52± 0.017 mm is drilled, resulting in a surface roughness of 0.331 μm.

Design and identification of a double-acting piezoelectric-hydraulic hybrid actuator

Traditional single-acting piezoelectric-hydraulic hybrid actuators usually have the problem of inertial force caused by flow pulsation of the liquid,which degrades their output performance.To suppress or solve the associated inertial force and enhance its output capabilities,this paper proposes a new type of double-acting piezoelectric-hydraulic hybrid actuator with four check valves acting as mechanical diodes.The new hybrid actuator was fabricated and its output performance was tested.When the voltage is 700 Vp-pand the bias pressure is 2 MPa,the pulsation ratesδof the new actuator at 400 Hz,500 Hz and 600 Hz are 2.29,2.08 and 1.78,respectively,whileδof the single-acting hybrid actuator under the same conditions are 10.98,11.05 and 17.12.Therefore,the liquid pulsation rate of the new hybrid actuator is significantly reduced,which is beneficial for improving the flow uniformity and weakening the influence of inertial force on the hybrid actuator.This strategy ultimately leads to a maximum no-load velocity of 168.1 mm/s at 600 Hz and a maximum blocking force of 141 N at 450 Hz for the new hybrid actuator.In addition,this strategy has the potential to be used in other electrohydrostatic actuators to improve their performance.

Influences of the fluidizing and spouting pulsation on particle motion in spout-fluid beds

Effects of variable airflow on particle motion in spout-fluid beds are studied. Computational fluid dynam- ics using Navier-Stokes equations for the gas phase coupled with the discrete element method using Newton＇s laws for the solid phase have been employed. Results indicate that increasing the fluidizing velocity diminishes dead zones and increases both the total height of the bed and the traversed distance by particles in the steady spout-fluid bed. In pulsed airfows, two configurations are investigated, namely, the spouted pulsed-fluidized bed with pulsed flow of the fluidizing velocity, and the pulsed-spouted flu- idized bed with pulsed flow of the spouting velocity. The positive effect of pulsation on particle motion is shown and the effects of parameters, such as amplitude and frequency, on the dynamics of the bed are investigated in each configuration. An increase of up to 19% in traversed distance is found for the range studied, which suggests flow pulsation as a promising technique for increasing particle mixing in spout-fluid beds.

Numerical investigation of entropy generation and heat transfer of pulsating flow in a horizontal channel with an open cavity

In this study, the entropy generation and the heat transfer of pulsating air flow in a horizontal channel with an open cavity heated from below with uniform temperature distribution are numerically investigated. A numerical method based on finite volume method is used to discretize the governing equations. At the inlet of the channel, pulsating velocity is imposed for a range of Strouhal numbers Stpfrom 0 to 1 and amplitude Apfrom 0 to 0.5. The effects of the governing parameters, such as frequency and amplitude of the pulsation, Richardson number, Ri, and aspect ratio of the cavity, L/H, on the flow field, temperature distribution, average Nusselt number and average entropy generation, are numerically analyzed. The results indicate that the heat transfer and entropy generation are strongly affected by the frequency and amplitude of the pulsation and this depends on the Richardson number and aspect ratio of the cavity. The pulsation is more effective with the aspect ratio of the cavity L/H= 1.5 in terms of heat transfer enhancement and entropy generation minimization.

Characterization of Swirling Inflow Effects on Turbine Performance under Pulsating Flows

The present study focuses on the influence of the swirling flows on flow behaviors and performance of a radial-flow turbocharger turbine under pulsating inflow condition.To characterize the effects of swirling flow,three sets of simulations of the turbine were carried out,which are an unsteady simulation under pulsating swirling inflow,an unsteady simulation under equivalent pulsating uniform inflow,and quasi-steady simulations under uniform inflow.Results proved that swirling flow has a considerable negative influence on turbine instantaneous performance and lead to 2.5%cycle-averaged efficiency reduction under pulsating flow condition.Swirling inflow would lead to significant losses in both the volute and the rotor,while the pulsating inflow leads to higher losses in the rotor and shows little influence on the losses in the volute.The instantaneous efficiency reduction of the turbine could be correlated with the time-varying inlet swirl strength.Under the influence of unsteady inlet swirls,the volute flow field is highly distorted and the free vortex relation is no longer valid.The swirling flow has strong interactions with the wake flow of the volute tongue,leading to additional losses.Relative flow angle at rotor inlet is remarkably reduced and its distribution is significantly distorted.Strong separation flows and passage vortices would appear in the rotor because of the swirling inflow,leading to inferior rotor performance.

Numerical Research on the Influence of Deborah Number on Flow and Heat Transfer of Maxwell Fluid in a Tube with Laminar Pulsating Flow

The flow and heat transfer characteristics of Maxwell fluid in a pipe under pulsating pressure gradient were studied. The governing equations were made dimensionless. The Rubin boundary condition was adopted. The flow field was solved theoretically and the temperature field was obtained using finite volume method. A general model suitable for various fluctuating characteristics and physical parameters was established. The Deborah number(De) was used to characterize the fluidity of the fluid. The influence of De on flow and temperature fields was evaluated. The Nusselt number and start-up process of Maxwell fluid were studied. Results showed that the influence of De on flow field was greater than that on temperature field. The effect of De on Nusselt number was irregular and related to the oscillation parameters. The over-shooting amplitude and oscillation time of axis center velocity in start-up flow grow larger with De.

Suppression effect of jet flow on pulsating pressure of cavity using scale-adaptive simulation model

The suppression of the aerodynamic noise in the cavity has a great significance to solve relevant puzzles of weapon bays. Acoustic field of the standard cavity model is simulated by using the computational fluid dynamics technology based on scale-adaptive simulation （SAS） model. The results obtained by the proposed method in this paper show reasonable agreement with experiments. On the basis of this, effect of different jet flow rates on the time-averaged variables, turbulent kinetic energy, root mean square （RMS） of sound pressure, sound sources distribution and the pulsating pressure distribution in the cavity is studied. The analysis shows that the jet flow has great influence on the cavity flow field and the distribution of pulsating pressure RMS by changing the morphology of the shear layer. The most obvious of these measures is spout4 configuration, the influence mainly in the form of reducing the pulsating pressure of the whole cavity and changing the sound pressure level in the far field. The results show that different jet flow rates have different control effects on pulsating pressure in the cavity and sound pressure level in the far field. Furthermore, the jet flow rates and the suppression effect on the pulsating pressure have no linear relation.

Nonlinear Parametric Vibration of a Fluid-Conveying Pipe Flexibly Restrained at the Ends

In this paper,the nonlinear parametric vibration of fluid-conveying pipes flexibly restrained at both ends and subjected to the pulsation flow excitation is investigated.The nonlinear equation of motion is derived using Hamilton^principle by considering the Kevin-Voigt viscoelastic damping,the geometric nonlinearity and the translational and rotational springs supported at the ends.The mode functions and eigen-frequencies are determined by the assumed mode method according to the elastic boundary conditions.The Galerkin method is implemented to obtain the natural frequencies and mode shapes of the pipe conveying fluid with different flow velocities.The effects of flexibly restrained conditions on stability of the pipe are analyzed.The nonlinear responses of the pipe under pulsating flow excitation are solved by the direct numerical method.The vibration behaviors are discussed in details,such as time history,frequency spectrum,phase-plane portrait,Poincare map and motion trajectory.The results show that the responses of sub-harmonic resonance and combination resonance can also be reflected in the rigidly supported pipes.The 1/5,1/8 and 1/13 sub-harmonic resonances can occur at certain excitation frequencies of the nonlinear parametric vibration system.The steady-state response amplitudes increase by a large margin and significantly affect the stability of the pipe.The effects of different spring stiffness coefficients on the parametric resonance responses are presented.For larger translational springs and rotational stiffness coefficients,the resonance frequencies shift to higher regions and the resonance amplitudes may reduce by a certain extent in accordance with the rigid-body motion.This study can provide helpful guidance on the analysis and design of piping systems subject to vibrations.

TWO MODELS FOR ROLL WAVES IN A MUD LAYER

As has been extensively reported by hydraulic engineers in China, the flow of hyperconcentrated fluid mud in rivers is often pulsating and appears as roll waves. We report here two theories for such pulsating flows besed on two constitutive laws: the power law and Bingham plastic law. In order to account for the nonlinear bores convective inertia is kept in the approximate long wave equations. Kar man's momentum integral method with an assumed velocity profile is then employed. Results of the linearized instability analyses are discussed.Periodic bores are obtained either as stationary wave solutions or as the long- time limit of unstable disturbances which are initially infinitesimal. Implications on ho scour is examined.

Comparison of blood rheological models in patient specific cardiovascular system simulations

Newtonian, Quemada and Casson blood viscosity models are implemented in order to simulate the rheological behavior of blood under pulsating flow conditions in a patient specific iliac bifurcation. The influence of the applied blood constitutive equations is monitored via the wall shear stress （WSS） distribution, magnitude and oscillations, non-Newtonian importance factors, and viscosity values according to the shear rate. The distribution of WSS on the vascular wall follows a pattern which is independent of the theological model chosen. On the other hand, the WSS magnitude and oscillations are directly related to the blood constitutive equations applied and the shear rate. It is concluded that the Newtonian approximation is satisfactory only in high shear and flow rates. Moreover, the Newtonian model seems to overestimate the possibility for the formation of atherosclerotic lesions or aneurysms at sites of the vascular wall where the WSS are oscillating.