MONTE CARLO STUDY ON THE CRITICAL ADSORPTION POINT OF BONDFLUCTUATED POLYMER CHAINS TETHERED ON ADSORBING SURFACES

The behavior of three-dimensional bond fluctuation model chains tethered on an adsorbing fiat surface was simulated by the Monte Carlo method.The dependence of the number of surface contacts M on the interaction strengthεand the chain length N was investigated by a finite-size scaling law M = N;[a;+a;N;κ+ O((N;κ);)]forεnear the critical adsorption pointε;,i.e.,κ=（ε-ε;）/ε;closes to 0.The critical adsorption point was estimated to beε;=0.93,and the exponentsφ= 0.49 and l/v= 0.57.

Spatio-temporal variation of water salinity in mangroves revealed by continuous monitoring and its relationship to floristic diversity

Salinity is among the most critical factors limiting the growth and species distribution of coastal plants.Water salinity in estuarine ecosystems varies temporally and spatially,but the variation patterns across different time scales and salinity fluctuation have rarely been quantified.The effects of salinity on floristic diversity in mangroves are not fully understood due to the temporal and spatial heterogeneity of salinity.In this study,we monitored water salinity at an interval of 10-min over one year in three mangrove catchment areas representing the outer part,middle part,and inner part respectively of Dongzhai Bay,Hainan,China.The number of mangrove community types and dominant mangrove species of the three catchment areas were also investigated.We found that the diurnal variation and dry-season intra-month variation in water salinity were driven by tidal cycles.The seasonal variation in water salinity was mainly driven by rainfall with higher salinity occurring in the dry season and lower salinity occurring in the wet season.Spatially,water salinity was highest at the outer part,intermediate at the middle part,and lowest at the inner part of the bay.The intra-month and annual fluctuations of water salinity were highest at the middle part and lowest at the outer part of the bay.The number of mangrove community types and dominant species were lowest at the outer part,intermediate at the middle part,and highest at the inner part of the bay.These results suggest that the temporal variation of water salinity in mangroves is driven by different factors at different time scales and therefore it is necessary to measure water salinity at different time scales to get a complete picture of the saline environment that mangroves experience.Spatially,lower salinity levels benefit mangrove species richness within a bay landscape,however,further research is needed to distinguish the effects of salinity fluctuation and salinity level in affecting mangrove species richness.

Progress of Lyman-alpha-based beam emission spectroscopy(Ly BES)diagnostic on the HL-2A tokamak

An edge Lyman-alpha-based beam emission spectroscopy(LyBES)diagnostic,using a heating NBI(neutral beam injection)system,is currently under development on the HL-2A tokamak.The 20-channel edge LyBES,which is intended to measure the density fluctuation in plasma edge(from R=1960 mm to R=2026 mm)with an improved spatial resolution of 3.3 mm,is a complement to the existing conventional beam emission spectroscopy(BES)diagnostic.In this article,we introduce the progress of LyBES diagnostic,including the collection optics,the monochromator,and the detector system.The reflectance of the collection mirrors is measured to be~82%at 122 nm,and the aberration geometrical radius of the collection optics is tested to be~150μm in the aimed area.The linear dispersion of the LyBES monochromator is designed to be~0.09 nm mm^(-1).The bandwidth of the detector system with the 5×10^(7)V A^(-1)preamplifier gain is measured to be~280 kHz,and the peak-to-peak noise of the detector system is tested to be~16 mV.The finalized design,components development and testing of the LyBES diagnostic have been completed at present,and an overall performance of the LyBES diagnostic is to be confirmed in the next HL-2A campaign.

Optimization of Gas Production from Hydrate-Bearing Sediments with Fluctuation Characteristics

As an important source of low-carbon,clean fossil energy,natural gas hydrate plays an important role in improving the global energy consumption structure.Developing the hydrate industry in the South China Sea is important to achieving‘carbon peak and carbon neutrality’goals as soon as possible.Deep-water areas subjected to the action of long-term stress and tectonic movement have developed complex and volatile terrains,and as such,the morphologies of hydrate-bearing sediments(HBSs)fluctuate correspondingly.The key to numerically simulating HBS morphologies is the establishment of the conceptual model,which represents the objective and real description of the actual geological body.However,current numerical simulation models have characterized HBSs into horizontal strata without considering the fluctuation characteristics.Simply representing the HBS as a horizontal element reduces simulation accuracy.Therefore,the commonly used horizontal HBS model and a model considering the HBS’s fluctuation characteristics with the data of the SH2 site in the Shenhu Sea area were first constructed in this paper.Then,their production behaviors were compared,and the huge impact of the fluctuation characteristics on HBS production was determined.On this basis,the key parameters affecting the depressurization production of the fluctuating HBSs were studied and optimized.The research results show that the fluctuation characteristics have an obvious influence on the hydrate production of HBSs by affecting their temperatures and pressure distributions,as well as the transmission of the pressure drop and methane gas discharge.Furthermore,the results show that the gas productivity of fluctuating HBSs was about 5%less than that of horizontal HBSs.By optimizing the depressurization amplitude,well length,and layout location of vertical wells,the productivity of fluctuating HBSs increased by about 56.6%.

Impact of initial fluctuations and nuclear deformations in isobar collisions

Relativistic isobar^(96)_(44)Ru+^(96)_(44)Ru and^(96)_(40)Zr+^(96)_(40)Zrcollisions have revealed intricate differences in their nuclear size and shape,inspiring unconventional studies of nuclear structure using relativistic heavy ion collisions.In this study,we investigate the relative differences in the mean multiplicityR_(<Nch>)and the secondR_(ε2)and third-order eccentricityR_(ε3)between isobar collisions using initial state Glauber models.It is found that initial fluctuations and nuclear deformations have negligible effects on R_(<Nch>)in most central collisions,while both are important for the R_(ε2)and R_(ε3),the degree of which is sensitive to the underlying nucleonic or sub-nucleonic degree of freedom.These features,compared to real data,may probe the particle production mechanism and the physics underlying nuclear structure.

Experimental study on temperature fluctuations on plate surface induced by coaxial-jet flow

In nuclear reactors,temperature fluctuations of fluids may cause fatigue damage to adjacent structures;this is referred to as thermal striping.Research on thermal striping in the upper plenum has mainly focused on fluid fields.Few experimental studies have been reported on solid structures in a fluid field with a coaxial jet.This study entailed an experimental study of the temperature fluctuations in the fluid and on a plate surface caused by a coaxial jet.The temperature fluctuations of the fluid and plate surfaces located at different heights were analyzed.The cause of the temperature fluctuation was analyzed using a transient temperature distribution.The results show that the mixing of the hot and cold fluids gradually becomes uniform in the positive axial direction.The average surface temperatures tended to be consistent.When the jet reaches the plate surface,the swing of the jet center,contraction and expansion of the cold jet,and changes in the jet shape result in temperature fluctuations.The intensity of the temperature fluctuation was affected by the position.More attention should be paid when the plate is located at a lower height,and between the hot and cold-fluid nozzles.

Research on Anti-Fluctuation Control of Winding Tension System Based on Feedforward Compensation

In the fiber winding process,strong disturbance,uncertainty,strong coupling,and fiber friction complicate the winding constant tension control.In order to effectively reduce the influence of these problems on the tension output,this paper proposed a tension fluctuation rejection strategy based on feedforward compensation.In addition to the bias harmonic curve of the unknown state,the tension fluctuation also contains the influence of bounded noise.A tension fluctuation observer(TFO)is designed to cancel the uncertain periodic signal,in which the frequency generator is used to estimate the critical parameter information.Then,the fluctuation signal is reconstructed by a third-order auxiliary filter.The estimated signal feedforward compensates for the actual tension fluctuation.Furthermore,a time-varying parameters fractional-order PID controller(TPFOPID)is realized to attenuate the bounded noise in the fluctuation.Finally,TPFOPID is enhanced by TFO and applied to control a tension control system considering multi-source disturbances.The stability of the method is analyzed by using the Lyapunov theorem.Finally,numerical simulations verify that the proposed scheme improves the tracking ability and robustness of the system in response to tension fluctuations.

A New Device for Gas-Liquid Flow Measurements Relying on Forced Annular Flow

A new measurement device,consisting of swirling blades and capsule-shaped throttling elements,is proposed in this study to eliminate typical measurement errors caused by complex flow patterns in gas-liquid flow.The swirling blades are used to transform the complex flow pattern into a forced annular flow.Drawing on the research of existing blockage flow meters and also exploiting the single-phase flow measurement theory,a formula is introduced to measure the phase-separated flow of gas and liquid.The formula requires the pressure ratio,Lockhart-Martinelli number(L-M number),and the gas phase Froude number.The unknown parameters appearing in the formula are fitted through numerical simulation using computational fluid dynamics(CFD),which involves a comprehensive analysis of the flow field inside the device from multiple perspectives,and takes into account the influence of pressure fluctuations.Finally,the measurement model is validated through an experimental error analysis.The results demonstrate that the measurement error can be maintained within±8%for various flow patterns,including stratified flow,bubble flow,and wave flow.

Influence of blood glucose fluctuations on chemotherapy efficacy and safety in type 2 diabetes mellitus patients complicated with lung carcinoma

BACKGROUND Patients with type 2 diabetes mellitus(T2DM)have large fluctuations in blood glucose(BG),abnormal metabolic function and low immunity to varying degrees,which increases the risk of malignant tumor diseases and affects the efficacy of tumor chemotherapy.Controlling hyperglycemia may have important therapeutic implications for cancer patients.AIM To clarify the influence of BG fluctuations on chemotherapy efficacy and safety in T2DM patients complicated with lung carcinoma(LC).METHODS The clinical data of 60 T2DM+LC patients who presented to the First Affiliated Hospital of Ningbo University between January 2019 and January 2021 were retrospectively analyzed.All patients underwent chemotherapy and were grouped as a control group(CG;normal BG fluctuation with a mean fluctuation<3.9 mmol/L)and an observation group(OG;high BG fluctuation with a mean fluctuation≥3.9 mmol/L)based on their BG fluctuations,with 30 cases each.BGrelated indices,tumor markers,serum inflammatory cytokines and adverse reactions were comparatively analyzed.Pearson correlation analysis was performed to analyze the correlation between BG fluctuations and tumor markers.RESULTS The fasting blood glucose and 2-hour postprandial blood glucose levels in the OG were notably elevated compared with those in the CG,together with markedly higher mean amplitude of glycemic excursions(MAGE),mean of daily differences,largest amplitude of glycemic excursions and standard deviation of blood glucose(P<0.05).In addition,the OG exhibited evidently higher levels of carbohydrate antigen 19-9,carbohydrate antigen 125,carcinoembryonic antigen,neuron-specific enolase,cytokeratin 19,tumor necrosis factor-α,interleukin-6,and highsensitivity C-reactive protein than the CG(P<0.05).Pearson analysis revealed a positive association of MAGE with serum tumor markers.The incidence of adverse reactions was significantly higher in the OG than in the CG(P<0.05).CONCLUSION The greater the BG fluctuation in LC patients after chemotherapy,the more unfavorable the therapeutic effect of chemotherapy;the higher the level of tumor markers and inflammatory cytokines,the more adverse reactions the patient experiences.

Coordinated Capacitor Voltage Balancing Method for Cascaded H-bridge Inverter with Supercapacitor and DC-DC Stage

Cascaded H-bridge inverter(CHBI) with supercapacitors(SCs) and dc-dc stage shows significant promise for medium to high voltage energy storage applications. This paper investigates the voltage balance of capacitors within the CHBI, including both the dc-link capacitors and SCs. Balance control over the dc-link capacitor voltages is realized by the dcdc stage in each submodule(SM), while a hybrid modulation strategy(HMS) is implemented in the H-bridge to balance the SC voltages among the SMs. Meanwhile, the dc-link voltage fluctuations are analyzed under the HMS. A virtual voltage variable is introduced to coordinate the balancing of dc-link capacitor voltages and SC voltages. Compared to the balancing method that solely considers the SC voltages, the presented method reduces the dc-link voltage fluctuations without affecting the voltage balance of SCs. Finally, both simulation and experimental results verify the effectiveness of the presented method.

Neuropathological characteristics of abnormal white matter functional signaling in adolescents with major depression

BACKGROUND Major depression disorder(MDD)constitutes a significant mental health concern.Epidemiological surveys indicate that the lifetime prevalence of depression in adolescents is much higher than that in adults,with a corresponding increased risk of suicide.In studying brain dysfunction associated with MDD in adolescents,research on brain white matter(WM)is sparse.Some researchers even mistakenly regard the signals generated by the WM as noise points.In fact,studies have shown that WM exhibits similar blood oxygen level-dependent signal fluctuations.The alterations in WM signals and their relationship with disease severity in adolescents with MDD remain unclear.AIM To explore potential abnormalities in WM functional signals in adolescents with MDD.METHODS This study involved 48 adolescent patients with MDD and 31 healthy controls(HC).All participants were assessed using the Patient Health Questionnaire-9 Scale and the mini international neuropsychiatric interview(MINI)suicide inventory.In addition,a Siemens Skyra 3.0T magnetic resonance scanner was used to obtain the subjects'image data.The DPABI software was utilized to calculate the WM signal of the fractional amplitude of low frequency fluctuations(fALFF)and regional homogeneity,followed by a two-sample t-test between the MDD and HC groups.Independent component analysis(ICA)was also used to evaluate the WM functional signal.Pearson’s correlation was performed to assess the relationship between statistical test results and clinical scales.RESULTS Compared to HC,individuals with MDD demonstrated a decrease in the fALFF of WM in the corpus callosum body,left posterior limb of the internal capsule,right superior corona radiata,and bilateral posterior corona radiata[P<0.001,family-wise error(FWE)voxel correction].The regional homogeneity of WM increased in the right posterior limb of internal capsule and left superior corona radiata,and decreased in the left superior longitudinal fasciculus(P<0.001,FWE voxel correction).The ICA results of WM overlapped with those of regional homogeneity.The fALFF of WM signal in the left posterior limb of the internal capsule was negatively correlated with the MINI suicide scale(P=0.026,r=-0.32),and the right posterior corona radiata was also negatively correlated with the MINI suicide scale(P=0.047,r=-0.288).CONCLUSION Adolescents with MDD involves changes in WM functional signals,and these differences in brain regions may increase the risk of suicide.

A Unique Modelling Strategy to Dynamically Simulate the Performance of a Lobe Pump for Industrial Applications

The performance of a newly designed tri-lobe industrial lobe pump of high capacity is simulated by using commercial CFD solver Ansys Fluent. A combination of user-defined-functions and meshing strategies is employed to capture the rotation of the lobes. The numerical model is validated by comparing the simulated results with the literature values. The processes of suction, displacement, compression and exhaust are accurately captured in the transient simulation. The fluid pressure value remains in the range of inlet pressure value till the processes of suction and displacement are over. The instantaneous process of compression is accurately captured in the simulation. The movement of a particular working chamber is traced along the gradual degree of lobe’s rotation. At five different degrees of lobe’s rotation, pressure contour plots are reported which clearly shows the pressure values inside the working chamber. Each pressure value inside the working chamber conforms to the particular process in which the working chamber is operating. Finally, the power requirement at the shaft of rotation is estimated from the simulated values. The estimated value of power requirement is 3.61 BHP FHP whereas the same calculated theoretically is 3 BHP FHP. The discrepancy is attributed to the assumption of symmetry of blower along the thickness.

Indian: Textile industry perspectives from 2023 and hopes for 2024

The year gone by has been one of the most challenging years for the Indian textile industry.The major challenges have been the fluctuating cotton prices,diminishing demand,capacity under-utilization and dumping of imported fabrics and garments from China and Bangladesh.The buying by the US and EU has remained quite low and that too for an unusually longer period,which has affected the exports badly.

Variability in Quantity and Salinity of Produced Water from an Oil Production in South Kuwait

Produced water (PW) is the largest waste stream in the oil and gas industry. Water remains trapped for millions of years in the reservoir with oil and gas. When a hydrocarbon reservoir is infiltrated by a production well, the produced fluids commonly contain water. The understanding of this water’s constituents and volumes is vital for the sustainable continuity of production operations, as PW has a number of negative impacts on the infrastructure integrity of the operation. On the other hand, PW can be an alternative source of irrigation water as well as of industrial salt. Interestingly, both the quantity as well as the quality of PW do not remain constant but can vary, both progressively and erratically, even over short periods of time. This paper discusses such a situation of variable PW in an oil and gas operation in the State of Kuwait.

A Cell Screening Algorithm Integrating Genetic and Numerical Differentiation

The consistency of the cell has a significant impact on battery capacity,endurance,overall performance,safety,and service life extension.However,it is challenging to identify cells with high consistency and no loss of battery energy.This paper presents a cell screening algorithm that integrates genetic and numerical differentiation techniques.Initially,a mathematical model for battery consistency is established,and a multi-step charging strategy is proposed to satisfy the demands of fast charging technology.Subsequently,the genetic algorithm simulates biological evolution to efficiently search for superior cell combinations within a short time while evaluating capacity,voltage consistency,and charge/discharge efficiency.Finally,through experimental validation and comparative analysis with similar algorithms,our proposed method demonstrates notable advantages in terms of both search efficiency and performance.

Deformation and failure mechanism of Yanjiao rock slope influenced by rainfall and water level fluctuation of the Xiluodu hydropower station reservoir

With the construction of the Xiluodu hydropower station on the Jinsha River,the reservoir impoundment began in 2013 and the water level fluctuates annually between 540 m and 600 m above sea level.The Yanjiao rock slope which is located on the left bank of the Jinsha River 75 km upstream of the Xiluodu dam site,began to deform in 2014.The potential failure of the slope not only threatens Yanjiao town but also affects the safe operation of the Xiluodu reservoir.This paper is to find the factors influencing the Yanjiao slope deformation through field investigation,geotechnical reconnaissance,and monitoring.Results show that the Yanjiao slope can be divided into a bank collapse area(BCA)and a strong deformation area(SDA)based on the crack distribution characteristics of the slope.The rear area of the slope has been experiencing persistent deformation with a maximum cumulative displacement(GPS monitoring point G4)of 505 mm and 399 mm in the horizontal and vertical directions,respectively.The potential failure surface of the slope is formed 36 m below the surface based on the borehole inclinometer.The bank collapses of the Yanjiao slope are directly caused by the reservoir impoundment while the deformation area of the slope is affected by the combination of the rainfall and reservoir water level fluctuation.Based on mechanism of the Yanjiao slope,prestressed anchor combined with the surface drainage and slope unloading are recommended to prevent potential deformation.

Characteristics of debris flow impact on a double-row slit dam

To accurately predict impact loads can ensure the safe operation of debris flow control projects.The instantaneous impact process is usually considered in the calculation of the debris flow impact force;however,the redistribution of an impact load after structural regulation is unclear.In this study we deduced the theoretical calculation of a debris flow impact on a double-row slit dam,and carried out a verification experiment on the debris flow impact.The calculation model considers the influence of the debris flow properties,dam arrangement and pile material.The results show that the impact force of the debris flow is obviously affected by the bulk density.When the bulk density is 21 kg/m^(3),the maximum impact force on the pile dam is 1.15 times that when the bulk density is 15 kg/m^(3),but the time it takes for the debris flow to pass through the dam body is reduced by 60%.The larger the relative pile spacing,the more sufficient the flow space and the lower the maximum impact force.The maximum impact force of relative pile spacing of 0.8 is 12%less than that of elative pile spacing of 0.5.The horizontal distribution of the impact force in the mud depth range is parabolic.The maximum impact force on the centre pier is 1.3 times that of a side pier,and the maximum impact force on the dam body appears at the top of the mud depth range.From the vertical distribution of the impact force,the maximum impact force at the highest mud mark is approximately 70%of that of the bottom.With the increase in the relative pile spacing,the longitudinal maximum impact force distribution first decreases and then increases.

Formation and control of the surface defect in hypo-peritectic steel during continuous casting:A review

Hypo-peritectic steels are widely used in various industrial fields because of their high strength,high toughness,high processability,high weldability,and low material cost.However,surface defects are liable to occur during continuous casting,which includes depression,longitudinal cracks,deep oscillation marks,and severe level fluctuation with slag entrapment.The high-efficiency production of hypo-peritectic steels by continuous casting is still a great challenge due to the limited understanding of the mechanism of peritectic solidification.This work reviews the definition and classification of hypo-peritectic steels and introduces the formation tendency of common surface defects related to peritectic solidification.New achievements in the mechanism of peritectic reaction and transformation have been listed.Finally,countermeasures to avoiding surface defects of hypo-peritectic steels duiring continuous casting are summarized.Enlightening certain points in the continuous casting of hypo-peritectic steels and the development of new techniques to overcome the present problems will be a great aid to researchers.

Dynamic grouping control of electric vehicles based on improved k-means algorithm for wind power fluctuations suppression

To address the significant lifecycle degradation and inadequate state of charge(SOC)balance of electric vehicles(EVs)when mitigating wind power fluctuations,a dynamic grouping control strategy is proposed for EVs based on an improved k-means algorithm.First,a swing door trending(SDT)algorithm based on compression result feedback was designed to extract the feature data points of wind power.The gating coefficient of the SDT was adjusted based on the compression ratio and deviation,enabling the acquisition of grid-connected wind power signals through linear interpolation.Second,a novel algorithm called IDOA-KM is proposed,which utilizes the Improved Dingo Optimization Algorithm(IDOA)to optimize the clustering centers of the k-means algorithm,aiming to address its dependence and sensitivity on the initial centers.The EVs were categorized into priority charging,standby,and priority discharging groups using the IDOA-KM.Finally,an two-layer power distribution scheme for EVs was devised.The upper layer determines the charging/discharging sequences of the three EV groups and their corresponding power signals.The lower layer allocates power signals to each EV based on the maximum charging/discharging power or SOC equalization principles.The simulation results demonstrate the effectiveness of the proposed control strategy in accurately tracking grid power signals,smoothing wind power fluctuations,mitigating EV degradation,and enhancing the SOC balance.

药品价格指数的构建与应用

目的基于药品零售价格大数据构建药品价格指数,描述其波动特征,发挥其药品价格宏观监管作用,促进药品价格保持合理水平。方法运用链式拉氏指数构建原理建立药品价格指数模型,运用时间序列模型描述指数波动特征,识别并分析药品价格波动异常状况。结果2015年1月—2020年12月,药品价格总指数小幅上涨,累计涨幅为14.43%,年均涨幅约2.40%,市场化改革成效较为显著。通过基于局部加权回归的季节趋势分解(seasonal-trend decomposition using loess,STL)方法对获得的药品价格总指数时间序列进行分析,指数呈长期平缓上升趋势,不规则波动值为-1.41~2.03,说明药品价格受外因影响较小,周期性特征仍有待进一步研究。2015年1月—2020年12月,根据药品价格指数共监测到价格异常风险32次。结论药品价格指数较全面地反映药品价格走势,对于药品价格异常波动具有一定的预警作用,能够为我国药品价格监管提供有效工具。