Effects of Different Flue-curing Barns on Aroma Quality of Upper Flue-cured Tobacco Leaves of K326

[Objective] This study was conducted to compare the aroma quality of up-per leaves of K326 flue-cured in different barns, and provide theoretical references for the development and optimization of bulk curing barn and the supporting tech-niques. [Method] The upper leaves of K326 were flue-cured in a commonness barn, a four-shelf bulk curing barn and a three-shelf bulk curing barn separately, and then the contents of aroma components and taste quality indices of the finished leaves were measured and compared. [Result] The contents of total aroma components, chromoplast pigment degradation products, phenylalanine aroma components and neophytadiene showed no significant differences in the leaves flue-cured in four-shelf bulk curing barn and commonness barn, but were significantly or very significantly higher than those in the leaves flue-cured in three-shelf bulk curing barn. The con-tents of carotenoid degradation products, Mail ard reaction products, cembranes aro-ma components and total aroma components （except neophytadiene） showed no significant difference among the three treatments. The results of sensory evaluation revealed that the sensory taste of the leaves flue-cured in four-shelf bulk curing barn was the best, as the finished leaves had rich, delicate aroma, comfortable and clean aftertaste. The leaves flue-cured in commonness barn was better than those flue-cured in three-shelf bulk curing barn in aroma quality, amount and aftertaste. [Conclusion] The four-shelf bulk curing barn had a large volume for tobacco leaf processing, but a similar baking environment to the commonness barn, which is conducive to the formation and accumulation of aroma components, so the finished leaves had similar appearance and quality with those flue-cured in commonness barn. The upper flue-cured leaves in three-shelf bulk curing bran had poorer quality than those flue-cured in the other two barns.

Comparative Analysis on Chemical Components and Sensory Quality of Aging Flue-Cured Tobacco from Four Main Tobacco Areas of China

Complicated changes are happening during the aging process of flue-cured tobacco （FCT） and understanding of the changing components is of great significance in improving the quality,shortening aging time,and enhancing production and economic efficiency in tobacco industry.The aging samples of FCT from four main producing areas of China,i.e.,Yunnan,Sichuan,Hubei,and Dongbei,were used to study the changing rule of the components such as alkali,acid,and carbohydrate as well as the aroma and their relationship with sensory quality;and based on the correlation among the components and the sensory quality index,multivariable models were established to predict the aging quality.The results showed that the sensory quality of FCT increased steadily during the aging time,and at the same time,the acidic components （total organic acids,volatile acids） increased gradually,while the alkaline substances （nicotine,volatile alkali）,carbohydrate （total sugars,reducing sugar） and pH values showed a downward trend.Correlation analysis found that the sensory quality and pH values were negatively correlated （P0.05）,while the sensory quality with total organic acids and aroma were positively correlated.The optimal model for predicting the quality of FCT was y=56.75-0.63x12＋50.09x2-13.27x22,（y：sensory quality;x1：pH;x2：total organic acids）.The average predicating error was 1.04% with maximum predicating error of 2.89% and the accuracy rate of above 97%.

Effect of Combined Application of Organic Fertilizer and Chemical Fertilizer in Different Ratios on Growth,Yield and Quality of Fluecured Tobacco

The effect of different ratio of organic and inorganic fertilizers on the growth and the yield and quality of flue-cured tobacco was studied.Using randomized blocks design,the data of the test materials K326 were analyzed by using variance analysis,significance test and other methods.The release efficiency of organic fertilizer in the soil was slower,and the effect of organic fertilizer on the growth of tobacco plants was worse than that of chemical fertilizers,and under 25% organic fertilizer + 75% chemical fertilizer treatment,the quality of the fluecured tobacco was good.Under the treatment of 50% organic fertilizer + 50% chemical fertilizer,the production of flue-cured tobacco was high and the ratio of first-class tobacco was high.It is suggested that the organic fertilizer application ratio should be 25%-50% in the agricultural production.

Effects of Amount of Green Manure Returned to Field on Yield and Quality of Flue-cured Tobacco

The effects of amount of green manure returned to field on yield and quality of flue-cured tobacco were studied by field experiment. The results showed that significant positive correlation existed between tobacco leaf yield and small or moderate amount of green manure returned to field. Path analysis showed that moderate amount of green manure returned to field affected yield and quality of tobacco leaves, small green manure returned to field mainly affected leaf yield, while large amount of green manure returned to field mainly affected leaf quality. Therefore, the effect of moderate amount of green manure returned to field on yield and quality of tobacco leaves was best, and moderate amount of green manure returned to field was recommended in production of flue-cured tobacco.

Canonical Correlation between the Leaf Quality Indicators of "Moderate Aroma" Flue-cured Tobacco

In order to find out the correlation between tobacco quality evaluation indicators in China's traditional " moderate aroma" tobaccoproducing areas and simplify the tobacco quality evaluation indicators,we evaluate the appearance quality and smoking quality of 143 flue-cured tobacco leaf samples in China's " moderate aroma" tobacco-producing areas,test the physical traits and chemical component,and analyze the canonical correlation between four quality evaluation indicators. The results show that there is significant or extremely significant canonical correlation between four evaluation indicators( tobacco smoking quality,chemical component,appearance quality and physical trait quality); the cumulative variance contribution rate of evaluation indicators is in the order of chemical component( 69. 17%) > appearance quality( 68. 76%) > physical traits( 64. 13%); appearance quality is most closely related to physical traits( 93. 84%). The individual indicators for tobacco quality evaluation make different contribution to the correlation between quality evaluation indicators. The chemical component evaluation indicators mainly include total sugar and ratio of total sugar to betaine; sensory taste indicators mainly include aroma volume,smoke concentration,irritation and softness degree; physical trait evaluation indicators mainly include leaf weight,leaf length and leaf density; appearance quality indicators mainly include leaf organizational structure,color,maturity and identity. Studies have shown that in the large-scale ecoregion,using canonical correlation analysis to simplify tobacco quality evaluation indicators is feasible.

Effect of Different Boron Fertilizer Supply Patterns and Levels on Growth,Development and Quality of Flue-Cured Tobacco

Boron,one of the essential trace elements for normal growth and development of tobacco,has a great impact on the yield and quality of flue-cured tobacco. The objective of this study is to explore the best pattern and level of boron fertilizer supply of red soil in the Honghe tobacco area. In this study,the randomized block design was used to study different boron fertilizer supply methods and levels. The results showed that during transplanting,it was good to apply 1. 50 kg/ha Fertibor boron with pure boron content≥15%; at the resettling stage,it was good to spray 225 kg solution composed of 75 m L/ha Compo liquid boron with pure boron content≥130 g/L mixed with water onto leaves when night fell in a sunny day. The two fertilization methods had better effect than the basal application of boron fertilizer,and the resistance to pests and diseases or economic character of tobacco plants was better than under spraying treatment.

Effects of N Application Rates and NO_3-N to NH_4-N Ratios on Yield and Quality of Flue-cured Tobacco Planted in Black Soil

A field experiment about effects of nitrogen application rates and different NO3-N to NH4-N ratios on agronomic, chemical and biological characteristics as well as yield and quality of flue-cured tobacco grown in a black soil was conducted from 2004 to 2005 in Heilongjiang Province. The results showed that the nitrogen application rates at 45 kg·hm^-2 with the ratio of 75% NO3-N to 25% NH4-N resulted in the highest potassium and reducing sugar contents in the flue-cured tobacco leaving with the highest quality grade and value. It is recommended that this ni- trogen application rate and NO3-N to NH4-N ratio should be widely applied on flue-cured tobacco grown in the black soil in Heilongjiang Province.

Study on Loading Leaves Density with Cage Clamp on Quality of Cured Tobaccos in Bulk-Curing Barn

In order to determine the best loading density of tobacco leaf with cage clamp in bulk-curing barns, a curing test was conducted on middle-part tobacco leaves. The results showed that for good appearance quality of cured tobacco, the loading density at 59.52 kg/m2 （4 000 kg/barn） was the best, fol owed by 66.96 kg/m2 （4 500 kg/barn） and 74.40 kg/m2 （5 000 kg/barn）. As leaf loading density increased, the contents of leaf nicotine and total nitrogen increased, sugar content had smal changes, the ratio of sugar to nicotine decreased and tended to be balanced and the content of neutral aroma substances was decreasing, but the difference among treatments was not significant. With the increase of loading density, the sensory quality of cured leaf was better. When leaf loading density was 66.96 kg/m2 （4 500 kg/barn）, apperance quality of cured leaf improved considerably, with prominent aro-ma. Therefore, the best loading density of tobacco leaf in cage clamp of bulk-curing barn would be 66.96 kg/m2 （4 500 kg/barn） .

Effects of Two Curing Methods on Quality of Yellow Sun-cured Tobacco

[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.

Yield and Nicotine Content of Flue-Cured Tobacco as Affected by Soil Nitrogen Mineralization

Nitrogen(N)supply is the most important factor affecting yield and quality of flue-cured tobacco(FCT).A field experiment and an in situ incubation method were used to study the effects of soil N mineralization in the later stages of growth on yield and nicotine content of FCT in Fenggang and Jinsha,Guizhou Province.The yield and market value of FCT at Fenggang were much lower than those at Jinsha.However,the nicotine content of middle and upper leaves was much higher at Fenggang than at Jinsha when the same rate of fertilizer N was applied,which might be due to a higher N supply capacity at the Fenggang site.At later stages of growth(7-16 weeks after transplanting),the soil net N mineralization at Fenggang(56 kg N ha^(-1))was almost double that at Jinsha(30 kg N ha^(-1)).While soil NH_4-N and NO_3-N were almost exhausted by the plants or leached 5 weeks after transplanting,the N taken up at the later growth stages at Fenggang were mainly derived from soil N mineralization,which contributed to a high nicotine content in the upper leaves.The order of soil N contribution to N buildup in different leaves was:upper leaves>middle leaves>lower leaves.Thus,soil N mineralization at late growth stages was an important factor affecting N accumulation and therefore the nicotine content in the upper leaves.

Proteomics Identification of Differentially Expressed Proteins Relevant for Nicotine Synthesis in Flue-Cured Tobacco Roots Before and After Decapitation

Nicotine is a secondary substance synthesized in tobacco roots. In flue-cured tobacco planting, tobacco decapitation is an effective practice to promote nicotine biosynthesis by regulation of the redistribution of total nitrogen amounts. However, proteins relevant to nicotine synthesis in tobacco roots has not been identified and characterized yet. It is important to explore the regulation of nicotine biosynthesis in tobacco roots. To identify the proteins relevant to nicotine synthesis, the protein patterns in roots of flue-cured tobacco （cv. K326） before and after decapitation were analyzed. In the present study, the protein patterns in roots of flue-cured tobacco were analyzed by two-dimensional electrophoresis （2-DE）, and the differentially-expressed spots were identified by matrix assisted laser desorption ionization time of flight mass spectrometry （MALDI-TOF-MS）. Paired comparison of 2-DE maps revealed 26 spots of differentially-expressed proteins in roots before and after decapitation. Furthermore, nine differentially-expressed spots were identified. There were four proteins which were enzymes possibly involved in nicotine biosynthesis. In addition, the roles of the four enzymes in nicotine biosynthesis were discussed in a putative network. Our results would contribute to the understanding of the regulation pathway of nicotine biosynthesis and further to the molecular manipulation on the nicotine contents in flue-cured tobacco.

Characteristics of Potassium-Enriched, Flue-Cured Tobacco Genotype in Potassium Absorption, Accumulation, and In-Ward Potassium Currents of Root Cortex

This study was to investigate the main traits of potassium-enriched, flue-cured tobacco genotypes related to potassium absorption, accumulation, and in-ward potassium currents of the root cortex. Hydroponic methods, K^＋-depletion methods, and patch-clamp, whole-cell recordings were conducted to study the accumulation of dry matter and potassium in different organs, and to measure potassium absorption and dynamic and in-ward potassium currents in potassium-enriched, fluecured tobacco genotypes. The average dry weights of leaves and whole plant of potassium-enriched, flue-cured tobacco genotype ND202 were 10.20, and 14.85 g, respectively, higher than JYH （8.50 and 13.11 g, respectively） and NC2326 （8.39 and 12.72 g, respectively）, when potassium concentration in the solution ranged from 0.1 to 50 mmol L^-1. Potassium accumulation in the leaves of ND202 was 18.6% higher than JYH and 34% higher than NC2326 when potassium concentration in the solution was superior to 0.5 mmol L^-1. The Vmax （the maximum velocity） of ND202 was 118.11 lamol FW g^-1 h^-1, obviously higher than that of JYH （58.87 μmol FW g^-1 h^-1） and NC2326 （64.40 μmol FW g^-1 h^-1）. In the in-ward potassium currents, the absolute value of current density （pA/pF） of ND202 was 60, higher than that of JYH （50） and NC2326 （40）. Potassium concentration in leaves, Vmax, and in-ward potassium currents, could be used to screen potassium-enriched, flue-cured tobacco genotypes.

Relationship Between Hyperspectral Parameters and Physiological and Biochemical Indexes of Flue-Cured Tobacco Leaves

The experiment was set up for examining the physiological and biological indexes quickly and exactly, for obtaining information of tobacco-field fertilizing and tobacco growing. The ASD Field spec FR 2500 was used to measure spectra reflectance of flue-cured tobacco and the relationship between hyperspectral parameters and biochemical contents （total nitrogen, chlorophyll, carotenoid）, and physiological indexes （fresh weight, dry weight, moisture content） of flue-cured tobacco leaves was studied by correlation and stepwise regression statistic methods at different nitrogen and potassium levels. The results indicated that the spectra curves of different treatments had obvious rules and great diversities. There were high correlations between different types of spectra parameters and ten physiological and biochemical indexes of flue-cured tobacco leaves. Hyperspectral characteristic variables of ten physiological and biochemical indexes were found through stepwise regression, and SDr/SDb was the characteristic variable closest to seven biochemical contents. Simultaneously, the R2 and regression coefficient of equations reached 0.05 significant level and the equations had good estimating effects through the examination of other samples. Accordingly, this study suggested that the ten physiological and biochemical indexes could be estimated quickly by the estimating models, at the same time nitrogen-potassium fertilization and growth condition of flue-cured tobacco could be inspected.

Effects of Different Flue-curing Technologies on Submicroscopic Structure of Flue-cured Tobacco Leaves

[ Objective] This study aimed to compare the effects of low-temperature low-humidity tobacco flue-curing technology, moderate-temperature moderate- humidity tobacco flue-curing technology and moderate-temperature high-humidity tobacco flue-curing technology on submicroscopic structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method] Middle leaves of tobacco cuhivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the submicroscopic structure of flue-cured tobacco leaves. [ Result] Morphology changes and structural rupture of chloroplasts occurred at different time during three flue-curing proces- ses. In low-temperature low-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred late but rapidly; in moderate-tempera- ture moderate-humidity flue-curing process and moderate-temperature high-humidity flue-curing process, morphology changes and structural rupture of chloroplasts occurred early but slowly. Among these three flue-curing processes, the speed of changes in mitochondria morphology, cristae number and membrane rupture pres- ented an upward order of low-temperature low-humidity flue-curing process 〈 moderate-temperature high-humidity flue-curlng process 〈 moderate-temperature moderate-humidity flue-curing process. In low-temperature low-humldity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 36 -48 h ; in moderate-temperature moderate-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 24 - 36 h; in moderate-temperature high-humidity flue-curing process, starch granules in chloroplasts ruptured after flue-curing for 12 - 24 h. [ Conclusion ] Using low-temperature low-humidity flue- curing technology could prolong the maintenance duration of the submicroscopic structure integrity of flue-cured tobacco leaves, which was conducive to fully decom- posing and transforming substances in tobacco leaves and obtaining high-quality flue-cured tobacco leaves.

Effects of Different Flue-curing Technologies on Microscopic Structure of Flue-cured Tobacco Leaves

[Objective] This study aimed to compare the effects of Chinese quality-improving fragrunce-increasing tobacco flue-curing technology, Chinese three- stage tobaeeo flue-curing technology and Zimbabwean tobaceo flue-euring technology on microscopie structure of flue-cured tobacco leaves to provide theoretical basis for tobacco flue-curing. [ Method ] Middle leaves of tobacco cultivar K326 were collected in Pengshui County of Chongqing City for flue-curing experiment using three flue-curing technologies. Leaf samples were collected regularly in the flue-curing process, to investigate the microscopic structure of flue-cured tobaceo leaves. [ Result] During three flue-curing processes, leaves, palisade tissues and sponge tissues shrank gradually. Three flue-euring processes exhibited significant differ- ences in the peak of tissue shrinkage ： microscopic structure of flue-cured tobacco leaves in Chinese three-stage tobacco flue-curing process shrank earliest, follower by Chinese quality-improving fragrance-increasing tobacco flue-curing process; flue-eured tobacco leaves in Zimbabwean tobacco flue-curing process presented the latest shrinkage. At 84 h post-curing, leaf thickness in three flue-curing processes showed a descend order of Chinese three-stage tobacco flue-curing process 〉 Chinese quality-improving fragrance-increasing tobacco flue-curing process 〉 Zimbabwean tobacco flue-curing process. Upper and lower epidermal cells in Zimb- abwean tobacco flue-curing process ruptured earlier than other two flue-curing processes; eventually, the majority of cells ruptured and mixed with palisade tissues and sponge tissues. In Chinese quality-improving fragranee-increasing tobacco flue-curing process, only a small number of epidermal cells in dried leaves ruptured. Among three flue-curing technologies, Zimbabwean tobacco flue-curing technology exhibited the greatest damage to epidermal cells, followed by Chinese three-stage tobaceo flue-curing technology; Chinese quality-improving fragrance-increasing tobacco flue-curing technology had the minimum damage to epidermal cells. Mese- phyll cross-section exhibited significant morphological changes in stomata. To be specific, at 0 - 12 h post-curing, stomata of tobacco leaves closed with slightly prominent stamatal apparatuses on upper and lower epidermis; at 24 -72 h post-curing, stomata of tobaceo leaves changed gradually from opening to closure with significantly prominent stomatal apparatuses on upper and lower epidermis; at 84 h post-curing, stomata of tobacco leaves closed, and the majority of stomatal appa- ratuses were significantly prominent. In Chinese quality-improving fragrance-increasing tobacco flue-curing process, only a small number of epidermal ceils ruptured at 84 h pest-flue-curing; palisade tissues and sponge tissues shrank almost simultaneously. Significant gaps were observed between palisade tissues and between pal- isade tissues and sponge tissues. Chinese quality-improving fragrance-increasing tobacco flue-curing technology exhibited lower disorder level compared with other two flue-curing technologies. [ Conclusion] Chinese quality-improving fragrance-increasing tobacco flue-curlng technology was conducive to maintaining the micro- scopic structure integrity of flue-cured tobacco leaves and obtaining high-quality flue-cured tobacco leaves.

Risk Regionalization of Drought for Flue-cured Tobacco Planting in Qujing City Based on GIS

The risk regionalization of drought for flue-cured tobacco planting in Qujing City was studied to provide reference for drawing on advantages and avoiding disadvantages in flue-cured tobacco planting,disaster reduction,and disaster relief services.According to the production practice of flue-cured tobacco and local climate analysis,the risk of disaster-causing factors,sensitivity of disaster-breeding environment,vulnerability of carriers,and disaster prevention and reduction capability were analyzed and evaluated quantitatively.Secondly,starting from the formation mechanism of drought,a risk assessment model of the meteorological disaster was established by GIS technology.Finally,the risk assessment and regionalization of drought in the critical periods for drought-stricken flue-cured tobacco (transplanting period,root extending stage and vigorous growth period) in Qujing City were carried out.The results showed that in Qujing City,the risk areas of drought for flue-cured tobacco planting were divided into five grades in the transplanting period and six grades in the root extending stage and vigorous growth period.

Effect of Different Intercropping Methods on the Reduction of Heavy Metal Content in Flue-Cured Tobacco

Heavy metals not only adversely affect the quality of tobacco leaves,but also have very adverse effects on human health. In order to find out the effective cultivation method of controlling heavy metal content in flue-cured tobacco,the content of four kinds of heavy metals in soil and tobacco leaves in different intercropping treatments was tested. The results showed that there were significant differences between the effects of intercropping on the content of some heavy metals in soil and tobacco leaves. Different interplanting methods had a positive effect on the reduction of heavy metal content in tobacco leaves and play a very important and positive role in actual production.

Screening of Low Tar Flue Cured Tobacco Varieties

The main agronomic traits,economic traits,appearance quality,main chemical components,gas composition and physical parameters of 10 flue cured tobacco varieties were investigated in the experiment.And the field natural incidence of the main diseases was investigated.The results showed that main agronomic characters of the 10 varieties were in line with the breeding objectives,among which 5 varieties have good economic characters;5 varieties have good appearance quality;6 varieties have coordinated chemical composition and high potassium content;9 varieties have good smoke components and physical indicators.

Effects of Organic Fertilizers on Tobacco Growth and Heavy Metal Contents in Flue-cured Tobacco

Pb, Cd and As are main heavy metal elements in tobacco leaves in China. Through the application of organic fertilizers in the tobacco area of Pu'er City, the effects on tobacco growth and heavy metal contents were investigated. The results showed that the tobacco plants in the treatments applied with organic fertilizers as the base fertilizer grew at a lower rate and had relatively smaller stem girth and leaf number than the treatment applied with the compound fertilizer special for tobacco in early growth period, and the differences between various treatments were not significant. After applying the organic fertilizers, they had a positive effect in reducing heavy metal contents of flue-cured tobacco, and the effect of applying oil cake was better, followed by the treatment of chicken manure plus oil cake. The sole application of chicken manure had a certain effect on the control of Hg, As and Pb, but the Cd content increased. For the areas with high heavy metal levels, the selection of appropriate organic fertilizers has a practical significance to the reduction of heavy metal contents in tobacco leaves.

Comparative Analysis of Climate Conditions and Adaptability of Flue-cured Tobacco Growing in Field in Enshi Prefecture

By the comparative analysis of climate conditions （ten-day average temperature, rainfall and sunshine hours） and physiological needs of flue-cured tobacco growing in field in Enshi Prefecture, it is found that precipitation is insufficient at the seedling stage but very sufficient in the maturation pedod, which has limited the production of high quality tobacco. To produce high quality tobacco in Enshi Prefecture, it is needed to breed middle and late varieties with longer growth period, improve current breeding methods to increase transplanting elasticity, water transported seedlings enough, and control diseases and insect pests.