Increasing gasoline production in FCC unit can improve the utilization efficiency of petroleum resources and gain economic benefit.This paper discusses the technical principles for increasing FCC gasoline yield from t...Increasing gasoline production in FCC unit can improve the utilization efficiency of petroleum resources and gain economic benefit.This paper discusses the technical principles for increasing FCC gasoline yield from the aspects of feedstock properties,operating conditions,LCO(light cycle oil)recycling,catalyst selection and reactor type,and illustrates the industrial application examples for maximizing gasoline production.The technical measures,such as optimizing the feedstock,properly increasing the catalyst activity and reaction temperature,recycling LCO or hydrotreated LCO,applying high gasoline yield catalyst,and adopting the two-zone riser reactor,are proposed to enhance the gasoline yield.展开更多
In this paper, carbon nanotube supported Co-Mo catalysts for selective hydrodesulphurization (HDS) of fluid catalytic cracking (FCC) gasoline were studied, using di-isobutylene, cyclohexene, 1-octene and thiophene...In this paper, carbon nanotube supported Co-Mo catalysts for selective hydrodesulphurization (HDS) of fluid catalytic cracking (FCC) gasoline were studied, using di-isobutylene, cyclohexene, 1-octene and thiophene as model compounds to simulate FCC gasoline. The results show that the Co-Mo/CNT has very high HDS activity and HDS/hydrogenation selectivity comparing with the Co-Mo/γ-Al2O3 and Co-Mo/AC catalyst systems. The saturation ratio of cyclohexene was lower than 50%, and the saturation ratio of 1,3-di-isobutylene lower than 60% for the Co-Mo/CNT catalysts. Co/Mo atomic ratio was found to be one of the most important key factors in influencing the hydrogenation selectivity and HDS activity, and the most suitable Co/Mo atomic ratio was 0.4. Co/CNT and Mo/CNT mono-metallic catalysts showed lower HDS activity and selectivity than the Co-Mo/CNT bi-metallic catalysts.展开更多
Fluid catalytic cracking(FCC)technologies of downer reactors,which have reached the demonstration or commercial scale,are systematically discussed,i.e.,millisecond catalytic cracking,fluidization lab of Tsinghua Unive...Fluid catalytic cracking(FCC)technologies of downer reactors,which have reached the demonstration or commercial scale,are systematically discussed,i.e.,millisecond catalytic cracking,fluidization lab of Tsinghua University,and high-severity FCC.Moreover,aiming to promote industrial application,the fundamental studies are comprehensively described,particularly focusing on high-density downer reactors,clusters,and up-scaling.Furthermore,from the perspective of industrial application,some research directions toward further developments are suggested.展开更多
The demand for propylene has been growing recently. The concentration of olefins in the gasoline is strictly limited by the related environmental regulations. The olefins contained in the gasoline used as the feed cou...The demand for propylene has been growing recently. The concentration of olefins in the gasoline is strictly limited by the related environmental regulations. The olefins contained in the gasoline used as the feed could be cracked into light olefins to slash the olefin concentration in the gasoline to yield more propylene at the same time. The monolithic catalyst washcoated on the modified ZSM-5 zeolite was used in the experiments. The effect of the temperature, the Si/Al ratio in ZSM-5 and the addition of the rare earth elements on the selectivities and the yields of the light olefins were studied. The high yields of propylene and butene could be obtained under the experimental conditions of a higher temperature and Si/Al ratio with the addition of rare earth elements.展开更多
The effects of reaction temperature,mass ratio of catalystto oil,space velocity,andmass ratio of water to oil on the product distribution,the yields of light olefins(light olefins including ethylene,propylene and buty...The effects of reaction temperature,mass ratio of catalystto oil,space velocity,andmass ratio of water to oil on the product distribution,the yields of light olefins(light olefins including ethylene,propylene and butylene)and the composition of the fluid catalytic cracking(FCC)gasoline upgraded over the self-made catalyst GL in a confined fluidized bed reactor were investigated.The experimental results showed that FCC gasoline was obviously reformulated under appropriate reaction con-ditions.The olefins(olefins with C atom number above 4)content of FCC gasoline was markedly reduced,and the aromaticscontent andoctanenumber were increased.The upgraded gasoline met the new standard of gasoline,and meanwhile,higher yields of light olefins were obtained.Furthermore,higher reaction temperature,higher mass ratio of catalyst to oil,higher mass ratio of water to oil,and lower space velocity were found to be beneficial to FCC gasoline reformulation and light olefins production.展开更多
Catalytic cracking is the main method to lighten heavy crude oil,this process can produce high quality oil products such as gasoline and diesel,but also produces a large amount of fluid catalytic cracking slurry(FCCS)...Catalytic cracking is the main method to lighten heavy crude oil,this process can produce high quality oil products such as gasoline and diesel,but also produces a large amount of fluid catalytic cracking slurry(FCCS).The catalyst particles in FCCS seriously restrict the secondary processing of FCCS and need to be removed,and the properties of Fccs is an important factor that affects the removal efficiency of the catalyst particles.Based on the"effective contact point"model proposed by the research group,this study further proposed the"electrostatic separation efficiency calculation"model.In this model,since Fccs has a uniform distribution of catalyst particles,the ratio of the number of catalyst particles can be expressed as the ratio of area to achieve the calculation of separation efficiency.Then the catalyst removal efficiency under different viscosity was analyzed,thus verifying the feasibility of this model.The effects of temperature and mass ratio of four components on the viscosity of FccS were investigated respectively,then the effects of temperature and four components'mass ratio on the electrostatic sep-aration can be directly converted into the effect of viscosity on the electrostatic separation efficiency.All the results show the electrostatic separation efficiency decreases with increasing viscosity,and the best separationtemperatureis120℃.展开更多
A mathematical model has been developed for the simulation of gas-particle flow and fluid catalytic cracking in downer reactors. The model takes into account both cracking reaction and flow behavior through a four-lum...A mathematical model has been developed for the simulation of gas-particle flow and fluid catalytic cracking in downer reactors. The model takes into account both cracking reaction and flow behavior through a four-lump reaction kinetics coupled with two-phase turbulent flow. The prediction results show that the relatively large change of gas velocity affects directly the axial distribution of solids velocity and void fraction, which significantly interact with the chemical reaction. Furthermore, model simulations are carried out to determine the effects of such parameters on product yields, as bed diameter, reaction temperature and the ratio of catalyst to oil, which are helpful for optimizing the yields of desired products. The model equations are coded and solved on CFX4.4.展开更多
文摘Increasing gasoline production in FCC unit can improve the utilization efficiency of petroleum resources and gain economic benefit.This paper discusses the technical principles for increasing FCC gasoline yield from the aspects of feedstock properties,operating conditions,LCO(light cycle oil)recycling,catalyst selection and reactor type,and illustrates the industrial application examples for maximizing gasoline production.The technical measures,such as optimizing the feedstock,properly increasing the catalyst activity and reaction temperature,recycling LCO or hydrotreated LCO,applying high gasoline yield catalyst,and adopting the two-zone riser reactor,are proposed to enhance the gasoline yield.
基金Supported by Foundation of Innovation for Middle-Aged and Youth, CNPC (Foundation No.W990411)
文摘In this paper, carbon nanotube supported Co-Mo catalysts for selective hydrodesulphurization (HDS) of fluid catalytic cracking (FCC) gasoline were studied, using di-isobutylene, cyclohexene, 1-octene and thiophene as model compounds to simulate FCC gasoline. The results show that the Co-Mo/CNT has very high HDS activity and HDS/hydrogenation selectivity comparing with the Co-Mo/γ-Al2O3 and Co-Mo/AC catalyst systems. The saturation ratio of cyclohexene was lower than 50%, and the saturation ratio of 1,3-di-isobutylene lower than 60% for the Co-Mo/CNT catalysts. Co/Mo atomic ratio was found to be one of the most important key factors in influencing the hydrogenation selectivity and HDS activity, and the most suitable Co/Mo atomic ratio was 0.4. Co/CNT and Mo/CNT mono-metallic catalysts showed lower HDS activity and selectivity than the Co-Mo/CNT bi-metallic catalysts.
基金the funding of the project by SINOPEC (No. 120009)
文摘Fluid catalytic cracking(FCC)technologies of downer reactors,which have reached the demonstration or commercial scale,are systematically discussed,i.e.,millisecond catalytic cracking,fluidization lab of Tsinghua University,and high-severity FCC.Moreover,aiming to promote industrial application,the fundamental studies are comprehensively described,particularly focusing on high-density downer reactors,clusters,and up-scaling.Furthermore,from the perspective of industrial application,some research directions toward further developments are suggested.
文摘The demand for propylene has been growing recently. The concentration of olefins in the gasoline is strictly limited by the related environmental regulations. The olefins contained in the gasoline used as the feed could be cracked into light olefins to slash the olefin concentration in the gasoline to yield more propylene at the same time. The monolithic catalyst washcoated on the modified ZSM-5 zeolite was used in the experiments. The effect of the temperature, the Si/Al ratio in ZSM-5 and the addition of the rare earth elements on the selectivities and the yields of the light olefins were studied. The high yields of propylene and butene could be obtained under the experimental conditions of a higher temperature and Si/Al ratio with the addition of rare earth elements.
文摘The effects of reaction temperature,mass ratio of catalystto oil,space velocity,andmass ratio of water to oil on the product distribution,the yields of light olefins(light olefins including ethylene,propylene and butylene)and the composition of the fluid catalytic cracking(FCC)gasoline upgraded over the self-made catalyst GL in a confined fluidized bed reactor were investigated.The experimental results showed that FCC gasoline was obviously reformulated under appropriate reaction con-ditions.The olefins(olefins with C atom number above 4)content of FCC gasoline was markedly reduced,and the aromaticscontent andoctanenumber were increased.The upgraded gasoline met the new standard of gasoline,and meanwhile,higher yields of light olefins were obtained.Furthermore,higher reaction temperature,higher mass ratio of catalyst to oil,higher mass ratio of water to oil,and lower space velocity were found to be beneficial to FCC gasoline reformulation and light olefins production.
基金supported by the[Natural Science Foundation Project of Shandong Province#1]under Grant[ZR2019MEE033][Fundamental Research Funds for the central Universities#2]under Grant[19CX02035A].
文摘Catalytic cracking is the main method to lighten heavy crude oil,this process can produce high quality oil products such as gasoline and diesel,but also produces a large amount of fluid catalytic cracking slurry(FCCS).The catalyst particles in FCCS seriously restrict the secondary processing of FCCS and need to be removed,and the properties of Fccs is an important factor that affects the removal efficiency of the catalyst particles.Based on the"effective contact point"model proposed by the research group,this study further proposed the"electrostatic separation efficiency calculation"model.In this model,since Fccs has a uniform distribution of catalyst particles,the ratio of the number of catalyst particles can be expressed as the ratio of area to achieve the calculation of separation efficiency.Then the catalyst removal efficiency under different viscosity was analyzed,thus verifying the feasibility of this model.The effects of temperature and mass ratio of four components on the viscosity of FccS were investigated respectively,then the effects of temperature and four components'mass ratio on the electrostatic sep-aration can be directly converted into the effect of viscosity on the electrostatic separation efficiency.All the results show the electrostatic separation efficiency decreases with increasing viscosity,and the best separationtemperatureis120℃.
基金the Natura Science Foundation of China under contract number:20176024
文摘A mathematical model has been developed for the simulation of gas-particle flow and fluid catalytic cracking in downer reactors. The model takes into account both cracking reaction and flow behavior through a four-lump reaction kinetics coupled with two-phase turbulent flow. The prediction results show that the relatively large change of gas velocity affects directly the axial distribution of solids velocity and void fraction, which significantly interact with the chemical reaction. Furthermore, model simulations are carried out to determine the effects of such parameters on product yields, as bed diameter, reaction temperature and the ratio of catalyst to oil, which are helpful for optimizing the yields of desired products. The model equations are coded and solved on CFX4.4.