Effects of Dietary Energy Level and Source on Blood Metabolites,Hormone Secretion and Follicular Fluid Composition in Gilts

The objective of the study was to investigate the effects of dietary energy levels and sources on the blood metabolites,hormone secretion and the composition of follicular fluid in gilts.Fifty-four gilts with initial body weight of(59±4.2) kg were randomly allotted to six treatments.Treatments were low, normal,and high energy feeding levels,which were 87.5%,100%and 112.5%of recommendatory energy requirements by NRC(1998),respectively,and dietary energy sources(starch or fat).Blood samples and follicular fluids were collected on D18 and D19 of the second estrous cycle.The results showed that plasma concentrations of triglycerides and total cholesterol were higher in the fat group than that in the starch group(P【0.05),but those of glucose were similar between the two energy sources(P】0.05);dietary energy level exerted no effect on blood metabolites concentration(P】0.05).Gilts fed the high energy diet had a higher area under curve of plasma insulin(Insulin AUC),insulin-like growth factor-Ⅰ(IGF-Ⅰ) and leptin than did gilts fed the lower energy diet(P【0.05),but there was no significant difference between fat versus starch(P】0.05).Luteinizing hormone(LH) pulses were higher in gilts fed high energy rather than that in low energy diets(P】0.05),plasma concentration of estradiol(E2) was higher in the fat group than that in the starch group(P【0.05).The number of large follicles(diameter≥4 mm) and concentrations of IGF-Ⅰand E2 in follicular fluid were increasing significant as the level of energy increased(P【0.05),but the numbers of large follicles and follicular fluid composition were not affected by the source of dietary energy(P】0.05).The results indicate that gilts fed high energy diets had elevated plasma concentrations of metabolic hormones,IGF-Ⅰand LH secretion,and increased follicular fluid concentrations of IGF-Ⅰ,E2 and numbers of large follicles;gilts fed the dietary fat had a higher plasma concentration of cholesterol and E2.

Decrepitation Thermometry and Compositions of Fluid Inclusions of the Damoqujia Gold Deposit,Jiaodong Gold Province,China:Implications for Metallogeny and Exploration

The recently discovered Damoqujia （大磨曲家） gold deposit is a large shear zone-hosted gold deposit of disseminated sulphides located in the north of the Zhaoping （招平） fault zone, Jiaodong （胶东） gold province, China. In order to distinguish the temperature range of cluster inclusions from different mineralization stages and measure their compositions, 16 fluid inclusions and 5 isotopic geochemistry samples were collected for this study. Corresponding to different mineralization stages, the multirange peaks of quartz decrepitation temperature （250-270, 310-360 and 380-430℃） indicate that the activity of ore-forming fluids is characterized by multistage. The ore-forming fluids were predominantly of high-temperature fluid system （HTFS） by CO2-rich, and SO4^2--K^＋ type magmatic fluid during the early stage of mineralization and were subsequently affected by low-temperature fluid system （LTFS） of CH4-rich, and Cl^--Na^＋/Ca^2＋ type meteoric fluid during the late stage of mineralization. Gold is transferred by Au-HS^- complex in the HTFS, and Au-Cl^- complex can be more important in the LTFS. The transition of fluids from deeper to shallow environments results in mixing between the HTFS and LTFS, which might be one of the most key reasons for gold precipitation and large-scale mineralization. The ore-forming fluids are characterized by high-temperature, strong-activity, and superimposed mineralization, so that there is a great probability of forming large and rich ore deposit in the Damoqujia gold deposit. The main bodies are preserved and extend toward deeper parts, thereby suggesting a great potential in future.

Conductivity characteristics of landslide considering porosity,saturation,temperature and ion concentration

High-density resistivity imaging method is widely used in landslide monitoring.The resistivity of rock and soil is closely related to factors,such as porosity,moisture content,saturation and temperature.In this study,the resistivity test was designed to investigate the influence of physical factors and pore solution components on the resistivity of landslide soil.Experimental and analytical results find that both moisture content and volumetric water content varies greatly under the same resistivity.At different temperatures,soil resistivity exhibits great changes.Under the same temperature,the ion concentration and species in pore solutions have great influence on soil resistivity.Based on the test results and grey correlation analysis,this study established a resistivity model by considering porosity,saturation,temperature and ion concentration.The study lays a foundation for the high-density resistivity method to measure the moisture content of landslides.

Fluid/melt in continental deep subduction zones: Compositions and related geochemical fractionations

Plate subduction is the most magnificent process in the Earth. Subduction zones are important sites for proceeding matter- and energy- transports between the Earth's surface and the interior, continental crust growth, and crust-mantle interactions. Besides, a number of geological processes in subduction zones are closely related to human beings' daily life, such as volcanic eruptions and earthquakes, formation of mineral deposits. Subduction process thus has long been the centric topic of Earth sciences. The finding in 1980 s that continental crust could be subducted to mantle depths is a revolutionary progress in plate tectonic theory. Compared to oceanic crust, continental crust is colder, drier, lighter, and much more geochemically/isotopically heterogeneous. Hence, continental subduction process would affect the structure, compositions and evolutions of the overlying mantle wedge even more. During continental subduction and subsequent exhumation, fluids and melts can be generated in the(de)hydration process and partial melting process, respectively. These melts/fluids play important roles in crust-mantle interactions, elemental migrations, isotopic fractionations, and mantle metasomatism. By summarizing recent research works on subduction zones in this paper, we present a review on the types, physicochemical conditions and compositions of fluids/melts, as well as the migration behaviors of fluid-related characteristic elements(Nb-Ta-V) and the fractionation behaviors of non-traditional stable isotopes(Li-Mg) in subduction zones. The aim of this paper is to provide the readers an update comprehensive overview of the melt/fluid activities in subduction zones and of Li-Mg isotope systematics in subduction-related rocks and minerals.

Mechanical Analysis and Numerical Simulation for New Type of Dynamic Control Devices

The conventional dynamic control devices,such as fluid viscous damper(VFD)and isolating bearings,are unsuitable for the double-deck cable-stayed bridge due to a lack of sustainability,so it is necessary to introduce some high-tech dynamic control devices to reduce dynamic response for double-deck cable-stayed bridges under earthquakes.A(90+128)m-span double-deck cable-stayed bridge with a steel truss beam is taken as the prototype bridge.A 3D finite element model is built to conduct the nonlinear time-history analysis of different site categories in fortification intensityⅨ(0.40 g)degree area.Two new types of dynamic control devices-cable sliding friction aseismic bearings(CSFABs)and elasticity fluid viscous dampers composite devices(EVFDs)are introduced to reduce the dynamic responses of double-deck cable-stayed bridges with steel truss beam.The parametric optimization design for the damping coefficient C and the elastic stiffness of spring K of EVFDs is conducted.The following conclusions are drawn:(1)The hybrid support system by EVFDs and CSFABs play a good function under both seismic and regular work,especially in eliminating the expansion joints damage;(2)The hybrid support system can reduce the beam-end displacement by 75%and the tower-bottom bending moment by 60%under the longitudinal seismic excitation.In addition,it can reduce the pier-bottom bending moment by at least 45%under transverse seismic and control the relative displacement between the pier and beam within 0.3 m.(3)Assuming the velocity indexα=0.3,the parametric optimization suggests the damping coefficient C as 2000 kN·s·m-1in siteⅠ0,4000kN·s·m-1in siteⅡ,6000 kN·s·m-1in siteⅣ,and the elastic stiffness of spring K as 10000 kN/m in siteⅠ0,50000 kN/m in siteⅡ,and 100000 kN/m in siteⅣ.

Water film coated composite liquid metal marble and its fluidic impact dynamics phenomenon

A composite liquid metal marble made of metal droplet coated with water film was proposed and its impact dynamics phenomenon was disclosed. After encapsulating the liquid metal into water droplets, the fabricated liquid marble successfully avoided being oxygenized by the metal fluid and thus significantly improved its many physical capabilities such as surface tension modification and shape control. The striking behaviors of the composite liquid metal marbles on a substrate at room temperature were experimentally inves- tigated in a high speed imaging way. It was disclosed that such marbles could disintegrate, merge, and even rebound when impacting the substrate, unlike the existing dynamic fluidic behaviors of liquid marble or metal droplet. The mechanisms lying behind these features were preliminarily interpreted. This fundamental finding raised profound multiphase fluid mechanics for understanding the complex liquid composite which was also critical for a variety of practical applications such as liquid metal jet cooling, inkjet printed electronics, 3D printing or metal particle fabrication etc.