The main ideas in the development of the solvent extraction mixer settler focused on achieving clean phase separation,minimizing the loss of the reagents and decreasing the surface area of the settlers.The role of baf...The main ideas in the development of the solvent extraction mixer settler focused on achieving clean phase separation,minimizing the loss of the reagents and decreasing the surface area of the settlers.The role of baffles in a mechanically agitated vessel is to ensure even distribution,reduce settler turbulence,promote the stability of power drawn by the impeller and to prevent swirling and vortexing of liquid,thus,greatly improving the mixing of liquid.The insertion of the appropriate number of baffles clearly improves the extent of liquid mixing.However,excessive baffling would interrupt liquid mixing and lengthen the mixing time.Computational fluid dynamics(CFD) provides a tool for determining detailed information on fluid flow(hydrodynamics) which is necessary for modeling subprocesses in mixer settler.A total of 54 final CFD runs were carried out representing different combinations of variables like number of baffles,density and impeller speed.CFD data shows that amount of separation increases with increasing baffles number and decreasing impeller speed.展开更多
Invert traps are used to trap sewer solids flowing into a sewer drainage system, The performance of the invert trap in an open rectangular channel was experimentally and numerically analysed using field sewer solids c...Invert traps are used to trap sewer solids flowing into a sewer drainage system, The performance of the invert trap in an open rectangular channel was experimentally and numerically analysed using field sewer solids collected from a sewer drain. Experiments showed that the free water surface rises over the central opening （slot） of the invert trap, which reduces the velocity near the slot and allows more sediment to be trapped in comparison with the case for the fixed-lid model （assuming closed conduit flow with a shear-free top wall） used by earlier investigators. This phenomenon cannot be modelled using a closed conduit model as no extra space is provided for the fluctuation of the water surface, whereas this space is provided in the volume of fluid （VOF） model in the form of air space in ANSYS Fluent 14.0 software. Additionally, the zero atmospheric pressure at the free water surface cannot be modelled in a fixed-lid model. In the present study, experimental trap efflciencies of the invert trap using field sewer solids were fairly validated using a three-dimensional computational fluid dynamics model （VOF model） coupled with a stochastic discrete phase model. The flow field （i.e., velocities） predicted by the VOF model were compared with experimental velocities obtained employing particle image velocimetry. The water surface profile above the invert trap predicted by the VOF model was found to be in good agreement with the experimentally measured profile. The present study thus showed that the VOF model can be used with the stochastic discrete phase model to well predict the performance of invert traps.展开更多
文摘The main ideas in the development of the solvent extraction mixer settler focused on achieving clean phase separation,minimizing the loss of the reagents and decreasing the surface area of the settlers.The role of baffles in a mechanically agitated vessel is to ensure even distribution,reduce settler turbulence,promote the stability of power drawn by the impeller and to prevent swirling and vortexing of liquid,thus,greatly improving the mixing of liquid.The insertion of the appropriate number of baffles clearly improves the extent of liquid mixing.However,excessive baffling would interrupt liquid mixing and lengthen the mixing time.Computational fluid dynamics(CFD) provides a tool for determining detailed information on fluid flow(hydrodynamics) which is necessary for modeling subprocesses in mixer settler.A total of 54 final CFD runs were carried out representing different combinations of variables like number of baffles,density and impeller speed.CFD data shows that amount of separation increases with increasing baffles number and decreasing impeller speed.
文摘Invert traps are used to trap sewer solids flowing into a sewer drainage system, The performance of the invert trap in an open rectangular channel was experimentally and numerically analysed using field sewer solids collected from a sewer drain. Experiments showed that the free water surface rises over the central opening （slot） of the invert trap, which reduces the velocity near the slot and allows more sediment to be trapped in comparison with the case for the fixed-lid model （assuming closed conduit flow with a shear-free top wall） used by earlier investigators. This phenomenon cannot be modelled using a closed conduit model as no extra space is provided for the fluctuation of the water surface, whereas this space is provided in the volume of fluid （VOF） model in the form of air space in ANSYS Fluent 14.0 software. Additionally, the zero atmospheric pressure at the free water surface cannot be modelled in a fixed-lid model. In the present study, experimental trap efflciencies of the invert trap using field sewer solids were fairly validated using a three-dimensional computational fluid dynamics model （VOF model） coupled with a stochastic discrete phase model. The flow field （i.e., velocities） predicted by the VOF model were compared with experimental velocities obtained employing particle image velocimetry. The water surface profile above the invert trap predicted by the VOF model was found to be in good agreement with the experimentally measured profile. The present study thus showed that the VOF model can be used with the stochastic discrete phase model to well predict the performance of invert traps.
