Synthesis of Fluoridated Hydroxyapatite Containing Potassium and Its Effect on Dentin

The aim of this work was to produce a nanoscale fluoridated and potassium containing hydroxyapatite via sol-gel method and to observe the effect of occlusion of the dentin tubule under scanning electron microscopy. HF was selected as fluorine-containing rengent which was added into mixed Ca （ NO3 ）2-P2O5 ethanol solutions to obtain dipping sols. All of the resulting samples showed apatite structure in their X- ray diffraction pattern. The lattice parameter a and the crystallite size were calculated to demonstrate the crystalline structure of fluoridated and potassium containing HA. Extracted paired premolars were chosen to obtain a fiat surface with opened tubules. It was observed that the tubules were covered by a 10 μm layer of fluoridated and potassium containing HA under the SEM. As the experimental results show the nanoscale fluoridated and potassium containing hydroxyapatite occludes the dentin tubules.

Endogenous Trypsin Triggers Free Fluoride Release from Antarctic Krill(Euphausia superba)Cuticle

During postmortem storage,fluoride in Antarctic krill can be enriched in the muscle.Trypsin,as the most important digestive enzyme in Antarctic krill with a high activity in low temperature,plays a potential role in this process.In this study,endogenous trypsin was purified and its properties were investigated.The involvement of trypsin in the generation of free fluoride from Antarctic krill cuticle was explored.Cuticle microstructure before and after hydrolysis was compared with scanning electron microscopy,and the ash samples of the hydrolyzed Antarctic krill cuticle were analyzed with X-ray diffraction,Fourier transform infrared spectroscopy,and electron dispersive spectroscopy,respectively.Mass spectrometry analysis and inhibition tests confirmed that the purified enzyme was endogenous trypsin.Results of the present study indicated that trypsin digestion caused the increases of the concentrations of both fluoride ions and free amino N simultaneously,while the protein coated on the cuticle surface was dissolved too.However,no compositional change was detected in the cuticle inorganic salts.These findings suggest that trypsin triggered free fluoride release from Antarctic krill cuticle.In addition,the kinetics of free fluoride release could be described by the equation C_(W)=(1-0.97^(-0.006t)-0.03e^(0.0558t))x337.53+10.50.The present study improved the understanding of the role of trypsin in free fluoride release from Antarctic krill cuticle,facilitating future studies aimed at reducing the fluoride content in krill protein during Antarctic krill processing.

Residual fluoride self-activated effect enabling upgraded utilization of recycled graphite anode

Recycling graphite anode from spent lithium-ion batteries(SLIBs)is regarded as a crucial approach to promoting sustainable energy storage industry.However,the recycled graphite(RG)generally presents degraded structure and performance.Herein,the residual fluoride self-activated effect is proposed for the upgraded utilization of RG.Simple and low-energy water immersion treatment not only widens the interlayer spacing,but also retains appropriate fluoride on the surface of RG.Theoretical analysis and experiments demonstrate that the residual fluoride can optimize Li~+migration and deposition kinetics,resulting in better Li~+intercalation/deintercalation in the interlayer and more stable Li metal plating/stripping on the surface of RG,As a result,the designed LFP||RG full cells achieve ultrahigh reversibility(~100%Coulombic efficiency),high capacity retention(67%after 200 cycles,0.85 N/P ratio),and commendable adaptability(stable cycling without short-circuiting,0.15 N/P ratio).The energy density is improved from 334 Wh kg^(-1)of 1.1 N/P ratio to 367 Wh kg^(-1)of 0.85 N/P ratio(total mass based on cathode and anode).The exploration of RG by residual fluoride self-activated effect achieves upgraded utilization beyond fresh commercial graphite and highlights a new strategy for efficient reuse of SLIBs.

Identifying the Hydrochemical Characteristics,Genetic Mechanisms and Potential Human Health Risks of Fluoride and Nitrate Enriched Groundwater in the Tongzhou District,Beijing,North China

Fluoride and nitrate enriched groundwater are potential threats to the safety of the groundwater supply that may cause significant effects on human health and public safety,especially in aggregated population areas and economic hubs.This study focuses on the high F^(−)and NO_(3)^(−)concentration groundwater in Tongzhou District,Beijing,North China.A total of 36 groundwater samples were collected to analyze the hydrochemical characteristics,elucidate genetic mechanisms and evaluate the potential human health risks.The results of the analysis indicate:Firstly,most of the groundwater samples are characterized by Mg-HCO_(3) and Na-HCO_(3) with the pH ranging from 7.19 to 8.28 and TDS with a large variation across the range 471-2337 mg/L.The NO_(3)^(−)concentration in 38.89%groundwater samples and the F^(−)concentration in 66.67%groundwater samples exceed the permissible limited value.Secondly,F^(−)in groundwater originates predominantly from water-rock interactions and the fluorite dissolution,which is also regulated by cation exchange,competitive adsorption of HCO_(3)−and an alkaline environment.Thirdly,the effect of sewage disposal and agricultural activities have a significant effect on high NO3-concentration,while the high F^(−)concentration is less influenced by anthropogenic activity.The alkaline environment favors nitrification,thus being conducive to the production of NO_(3)^(−).Finally,the health risk assessment is evaluated for different population groups.The results indicate that high NO_(3)^(−)and F^(−)concentration in groundwater would have the largest threat to children’s health.The findings of this study could contribute to the provision of a scientific basis for groundwater supply policy formulation relating to public health in Tongzhou District.

Ash removal from inferior coal via ammonium fluoride roasting and simultaneous yield of white carbon black

The quality upgrading and deashing of inferior coal by chemical method still faces great challenges.The dangers of strong acid,strong alkali,waste water and exhaust gas as well as high cost limit its industrial production.This paper systematically investigates the ash reduction and desilicification of two typical inferior coal utilizing ammonium fluoride roasting method.Under the optimal conditions,for fat coal and gas coal,the deashing rates are 69.02%and 54.13%,and the desilicification rates are 92.64%and 90.27%,respectively.The molar dosage of ammonium fluoride remains consistent for both coals;however,the gas coal,characterized by a lower ash and silica content(less than half that of the fat coal),achieves optimum deashing effect at a reduced time and temperature.The majority of silicon in coal transforms into gaseous ammonium fluorosilicate,subsequently preparing nanoscale amorphous silica with a purity of 99.90%through ammonia precipitation.Most of the fluorine in deashed coal are assigned in inorganic minerals,suggesting the possibility of further fluorine and ash removal via flotation.This research provides a green and facile route to deash inferior coal and produce nano-scale white carbon black simultaneously.

Enhanced Redox Electrocatalysis in High‑Entropy Perovskite Fluorides by Tailoring d–p Hybridization

High-entropy catalysts featuring exceptional properties are,in no doubt,playing an increasingly significant role in aprotic lithium-oxygen batteries.Despite extensive effort devoted to tracing the origin of their unparalleled performance,the relationships between multiple active sites and reaction intermediates are still obscure.Here,enlightened by theoretical screening,we tailor a high-entropy perovskite fluoride(KCoMnNiMgZnF_(3)-HEC)with various active sites to overcome the limitations of conventional catalysts in redox process.The entropy effect modulates the d-band center and d orbital occupancy of active centers,which optimizes the d–p hybridization between catalytic sites and key intermediates,enabling a moderate adsorption of LiO_(2)and thus reinforcing the reaction kinetics.As a result,the Li–O2 battery with KCoMnNiMgZnF_(3)-HEC catalyst delivers a minimal discharge/charge polarization and long-term cycle stability,preceding majority of traditional catalysts reported.These encouraging results provide inspiring insights into the electron manipulation and d orbital structure optimization for advanced electrocatalyst.

Covalent targeted radioligands potentiate radionuclide therapy

Targeted radionuclide therapy,in which radiopharmaceuticals deliver potent radionuclides to tumours for localized irradiation,has addressed unmet clinical needs and improved outcomes for patients with cancer1-4.A therapeutic radiopharmaceutical must achieve both sustainable tumour targeting and fast clearance from healthy tissue,which remains a major challenge5,6.A targeted ligation strategy that selectively fixes the radiopharmaceutical to the target protein in the tumour would be an ideal solution.Here we installed a sulfur(VI)fluoride exchange(SuFEx)chemistry-based linker on radiopharmaceuticals to prevent excessively fast tumour clearance.When the engineered radiopharmaceutical binds to the tumour-specific protein,the system undergoes a binding-to-ligation transition and readily conjugates to the tyrosine residues through the'click'SuFEx reaction.

Improved corrosion resistance of dental Ti50Zr alloy with(TiZr)N coating in fluoridated acidic artificial saliva

The electrochemical corrosion behavior of the dental Ti50 Zr alloy with and without nanocrystalline(TiZr)N coating was comparatively investigated in artificial saliva solutions with different pH values and fluoride ion concentrations. The chemical stability of the passive films on the coated and non-coated Ti50 Zr alloy was evaluated by calculating passive film thickness. The chemical compositions and valence structures of the passive films were analyzed by X-ray photoelectron spectroscopy(XPS). The results show that the(TiZr)N-coated alloy displays distinctly decreased corrosion rate and increased impedance compared with Ti50 Zr alloy in nonfluoridated and fluoridated acidic solutions. Particularly, in the solution of pH = 3.9 and 0.15% NaF-containing, the corrosion protection efficiency of(TiZr)N coating reaches90%. The excellent corrosion resistance of the coated alloy is attributed to that the nanocrystallines in(TiZr)N coating decreases micropores and crack defects, which strongly impedes the corrosive ions diffusion and electrode process at Ti substrate/coating interface. Meanwhile,(TiZr)N coating shows good passivation behavior in acidic solution and active–passive transition behavior in fluoridated acidic solution. The coated Ti50 Zr alloy with high chemical stability has potential application prospect for dental implants.

Mechanism of Learning and Memory Impairment in Rats Exposed to Arsenic and/or Fluoride Based on Microbiome and Metabolome

Objective Arsenic(As) and fluoride(F) are two of the most common elements contaminating groundwater resources. A growing number of studies have found that As and F can cause neurotoxicity in infants and children, leading to cognitive, learning, and memory impairments. However, early biomarkers of learning and memory impairment induced by As and/or F remain unclear. In the present study, the mechanisms by which As and/or F cause learning memory impairment are explored at the multi-omics level(microbiome and metabolome).Methods We stablished an SD rats model exposed to arsenic and/or fluoride from intrauterine to adult period.Results Arsenic and/fluoride exposed groups showed reduced neurobehavioral performance and lesions in the hippocampal CA1 region. 16S rRNA gene sequencing revealed that As and/or F exposure significantly altered the composition and diversity of the gut microbiome, featuring the Lachnospiraceae_NK4A136_group, Ruminococcus_1, Prevotellaceae_NK3B31_group, [Eubacterium]_xylanophilum_group. Metabolome analysis showed that As and/or F-induced learning and memory impairment may be related to tryptophan, lipoic acid, glutamate, gamma-aminobutyric acidergic(GABAergic) synapse, and arachidonic acid(AA) metabolism. The gut microbiota, metabolites, and learning memory indicators were significantly correlated.Conclusion Learning memory impairment triggered by As and/or F exposure may be mediated by different gut microbes and their associated metabolites.

The mechanism for tuning the corrosion resistance and pore density of plasma electrolytic oxidation(PEO)coatings on Mg alloy with fluoride addition

Here we prepared PEO coatings on Mg alloys in silicate-NaOH-phosphate electrolyte containing different concentrations of NaF addition.The detailed microstructural characterizations combining with potentiodynamic polarization and electrochemical impedance spectra(EIS)were employed to investigate the roles of fluoride in the growth and corrosion properties of PEO coating on Mg.The result shows the introduction of NaF led to a fluoride-containing nanolayer(FNL)formed at the Mg/coating interface.The FNL consists of MgO nanoparticles and insoluble MgF_(2)nanoparticles(containing rutile phase and cubic phase).The increase in the NaF concentration of the electrolyte increases the thickness and the MgF_(2)content in the FNL.When anodized in the electrolyte containing 2 g/L NaF,the formed FNL has the highest thickness of 100-200 nm along with the highest value of x of∼0.6 in(MgO)_(1-x)(MgF_(2))x resulted in the highest corrosion performance of PEO coating.In addition,when anodized in the electrolyte containing a low NaF concentration(0.4-0.8 g/L),the formed FNL was thin and discontinuous,which would decrease the pore density and increase the coating's uniformness simultaneously.

Contact Angle Prediction Model for Underwater Oleophobic Surfaces Based on Multifractal Theory

Traditional microstructure scale parameters have difficulty describing the structure and distribution of a roughmaterial’s surface morphology comprehensively and quantitatively. This study constructs hydrophilic and underwateroleophobic surfaces based on polyvinylidene fluoride (PVDF) using a chemical modification method, and the fractaldimension and multifractal spectrum are used to quantitatively characterize the microscopic morphology. A new contactangle prediction model for underwater oleophobic surfaces is established. The results show that the fractal dimension ofthe PVDF surface first increases and then decreases with the reaction time. The uniformity characterized by the multifractalspectrum was generally consistent with scanning electron microscope observations. The contact angle of water droplets onthe PVDF surface is negatively correlated with the fractal dimension, and oil droplets in water are positively correlated.When the fractal dimension is 2.0975, the new contact angle prediction model has higher prediction accuracy. Themaximum and minimum relative deviations of the contact angle between the theoretical and measured data are 18.20%and 0.72%, respectively. For water ring transportation, the larger the fractal dimension and spectral width of the materialsurface, the smaller the absolute value of the spectral difference, the stronger the hydrophilic and oleophobic properties, andthe better the water ring transportation stability.

Investigation of the sodium storage mechanism of iron fluoride hydrate cathodes using X-ray absorption spectroscopy and mossbauer spectroscopy

Elucidation of a reaction mechanism is the most critical aspect for designing electrodes for highperformance secondary batteries.Herein,we investigate the sodium insertion/extraction into an iron fluoride hydrate(FeF_(3)·0.5H_(2)O)electrode for sodium-ion batteries(SIBs).The electrode material is prepared by employing an ionic liquid 1-butyl-3-methylimidazolium-tetrafluoroborate,which serves as a reaction medium and precursor for F^(-)ions.The crystal structure of FeF_(3)·0.5H_(2)O is observed as pyrochlore type with large open 3-D tunnels and a unit cell volume of 1129A^(3).The morphology of FeF_(3)·0.5H_(2)O is spherical shape with a mesoporous structure.The microstructure analysis reveals primary particle size of around 10 nm.The FeF_(3)·0.5H_(2)O cathode exhibits stable discharge capacities of 158,210,and 284 mA h g^(-1) in three different potential ranges of 1.5-4.5,1.2-4.5,and 1.0-4.5 V,respectively at 0.05 C rate.The specific capacities remained stable in over 50 cycles in all three potential ranges,while the rate capability was best in the potential range of 1.5-4.5 V.The electrochemical sodium storage mechanism is studied using X-ray absorption spectroscopy,indicating higher conversion at a more discharged state.Ex-situ M?ssbauer spectroscopy strengthens the results for reversible reduction/oxidation of Fe.These results will be favorable to establish high-performance cathode materials with selective voltage window for SIBs.

F-μbond length andμSR depolarization spectrum calculation for fluoride using two-component density functional theory

First-principles calculation of muons in ionic fluorides has been proposed recently.However,there is a considerable difference between the obtained F-μbond length and the experimental data obtained by muon spin relaxation(μSR).Considering that the difference may be caused by ignoring the quantum effect of muons,we use two-component density functional theory(TCDFT)to consider the quantized muon and recalculate the bond length and theμSR depolarization spectrum.After testing several muon-electron correlation,we show that TCDFT can give better results than the commonly used“DFT+μ”.

Effect of fluoride ions on coordination structure of titanium in molten NaCl–KCl

The effects of fluoride ions(F^(-)) on the electrochemical behavior and coordination properties of titanium ions(Ti^(n+)) were studied in this work,by combining electrochemical and mathematical analysis as well as spectral techniques.The α was taken as a factor to indicate the molar concentration ratio of F^(-) and Ti^(n+).Cyclic voltammetry(CV),square wave voltammetry(SWV),and open circuit potential method(OCP)were used to study the electrochemical behavior of titanium ions under conditions of various α,and in-situ sampler was used to prepare molten salt samples when α equal to 0.0,1.0,2.0,3.0,4.0,5.0,6.0,and 8.0.And then,samples were analyzed by X-ray photoelectron spectroscopy(XPS) and Raman spectroscopy.The results showed that F^(-) in molten salt can reduce the reduction steps of titanium ions and greatly affects the proportion of valence titanium ions which making the high-valence titanium content increased and more stable.Ti^(2+) cannot be detected in the molten salt when α is higher than 3.0 and finally transferred to titanium ions with higher valence state.Investigation revealed that the mechanism behind those phenomenon is the coordination compounds(TiCl_(j) F_(i)^(m-)) forming.

Soft Template-Induced Porous Polyvinylidene Fluoride Membrane for Vanadium Flow Batteries

Vanadium flow batteries(VFBs)are considered ideal for grid-sc ale,long-duration energy storage applications owing to their decoupled output power and storage capacity,high safety,efficiency,and long cycle life.However,the widespread adoption of VFB s is hindered by the use of expensive Nafion membranes.Herein,we report a soft template-induced method to develop a porous polyvinylidene fluoride(PVDF)membrane for VFB applications.By incorporating water-soluble and flexible polyethylene glycol(PEG 400)as a soft template,we induced the aggregation of hydrophilic sulfonated poly(ether ether ketone),resulting in phase separation from the hydrophobic PVDF polymer during membrane formation.This process led to the creation of a porous PVDF membrane with controllable morphologies determined by the polyethylene glycol content in the cast solution.The optimized porous PVDF membrane enabled a stable VFB performance for 200 cycles at a current density of 80 mA/cm^(2),and the VFB exhibited a Coulombic efficiency of 95.2%and a voltage efficiency of 87.8%.These findings provide valuable insights for the development of highly stable membranes for VFB applications.

Fluoride Ion Adsorption Effect and Adsorption Mechanism of Self-Supported Adsorbent Materials Based on Desulfurization Gypsum-Aluminate Cement

The adsorption method has the advantages of low cost,high efficiency,and environmental friendliness in treating fluorinated wastewater,and the adsorbent material is the key.This study combines the inherent anion-exchange adsorption properties of layered double hydroxides(LDHs).Self-supported porous adsorbent materials loaded with AFm and AFt were prepared from a composite cementitious system consisting of calcium aluminate cement(CAC)and flue gas desulfurization gypsum(FGDG)by chemical foaming technique.The mineral composition of the adsorbent material was characterized by X-ray diffraction(XRD)and Scanning electron microscopy(SEM).Through the static adsorption experiment,the adsorption effect of the mineral composition of the adsorbent on fluoride ions was deeply analyzed,and the adsorption mechanism was revealed.XRD and SEM showed that the main hydration phases of the composite cementitious system consisting of CAC and FGDG are AFm,AFt,AH_(3),and CaSO_(4)·2H_(2)O.FGDG accelerates the hydration process of CAC and inhibits the transformation of AFt to AFm.The AFt content increased,and the AFm content decreased or even disappeared as the amount of FGDG increased.Static adsorption experiment results showed that AFm and AFt in adsorbent materials could significantly enhance the adsorption of fluoride ions.The adsorption of F^(−)in aqueous solution by PAG tends more towards monolayer adsorption with a theoretical maximum capacity of 108.70 mg/g and is similar to the measured value of 112.77 mg/g.

聚偏氯乙烯制备多孔碳吸附剂及其二氧化碳吸附性能研究

采用聚偏氟乙烯(PVDF)为原料,以NaOH为化学活化剂,在不同活化温度下制备出多孔碳材料,用氮气吸附仪测定其BET比表面积、孔径分布及孔容,采用TEM表征多孔碳材料形貌。通过变压吸附法研究了多孔碳吸附剂对二氧化碳的吸附性能,探讨了PVDF/NaOH的质量比对多孔碳材料的孔隙结构及二氧化碳吸附量的影响。实验结果表明,PVDF/NaOH的质量比对多孔碳材料的BET比表面积、孔径分布及孔容有良好的调控作用。当PVDF/NaOH的质量比为4∶1时,其最大BET比表面积为1543m2/g,孔容达0.727cm3/g,常温常压下二氧化碳吸附量为274mg/g。

氧化物杂质对氟锆玻璃光纤损耗的影响

在氟锆光纤中,氧化物杂质可以引起严重的散射和吸收损耗,其原因不外乎有以下几点: 1.析晶。氟化物玻璃在熔制时本身就是比较容易析晶的,而存在的氧化物杂质在其中又起着晶核作用,以致加速了析晶过程。 2.氧化物杂质自身的散射和吸收。

含氟化镁的冰晶石熔体与熔融金属铝的热力学平衡

测定了与含氟化镁的冰晶石熔体相平衡的熔融金属铝中钠和镁的含量。得出在低于4%MgF_2的浓度范围内,镁的浓度与钠浓度之比与冰晶石熔体中氟化镁浓度之间的关系为线性关系。在高于4%氟化镁的浓度范围之内,上述关系出现正偏差。

Qualitative analysis of re mineralized carious lesions subjected to fluoride supplement through confocal laser scanning microscope

Aim: 1] Comparative evaluation of the linear depth of induced remineralized lesions after subjecting to fluoride supplements and 2] To assess the average fluorescence at both the demineralized and the remi-neralized zones in all the three study groups under confocal laser scanning microscope. Method: Forty five sound human premolars extracted for orthodon-tic reasons were decoronated 1 mm below the ce-mento-enamel junction and coated with nail varnish except for a 3 × 3 mm window on the buccal surface. The samples were placed in 50 ml of de mineralizing solution at pH 4.6 for 96 hours. Following deminera-lization, the lower half of the 3 × 3 mm window in all the samples were covered with nail varnish to serve as control. The samples were randomly divided into three groups of fifteen teeth each (n = 15) and speci-mens in group A[Nfd] were remineralized using non-fluoridated dentifrice [control], those in groups B [Fd5] and group C [Fd10] using 500 ppm and 1000 ppm of fluoride containing dentifrice, respectively. The specimens were subjected to a 20 day reminera-lization treatment regimen and were sectioned into 100 μm thick sections and two images were captured on the buccal surface from either side of the midpoint of occluso-cervical length using confocal laser scan-ning microscope [CLSM]. Results: were tabulated and statistically analyzed by Anova. Study concluded that 1000 ppm fluoridated dentifrice showed a greater degree of remineralization than other groups and confocal laser scanning microscopes gives promising results in the diagnosis of early enamel lesions over the conventional methods.