The bioactivity of mica/apatite glass ceramic composites, including the in vitro behavior in simulated body fluid and the histological appearance of the interface between the mica/apatite glass ceramics and the rabbit...The bioactivity of mica/apatite glass ceramic composites, including the in vitro behavior in simulated body fluid and the histological appearance of the interface between the mica/apatite glass ceramics and the rabbit mandible defect in vivo under a dynamic condition. The results show that biological apatite layer forms on the surface of the mica/apatite glass ceramics after 1 d of immersion in the simulated body fluid, and becomes dense after 14 d. In vivo tests indicate that bone formation occurs after implantation for 14 d, and strong bonding of bone to the implant occurs after 42 d. No aseptic loosening occurs during 42 d of implantation. The finding shows that mica/apatite glass ceramics have good bioactivity and osteoconductivity for constructing bone graft, and can be promising for biomedical application.展开更多
Mica glass-ceramics were prepared by pressureless sintering with a phlogopite and various additives as raw materials. The effects of CaF2 content, Li2O content, ZrO2 content, and sintering temperature on the microstru...Mica glass-ceramics were prepared by pressureless sintering with a phlogopite and various additives as raw materials. The effects of CaF2 content, Li2O content, ZrO2 content, and sintering temperature on the microstructure and mechanical properties of the mica glass-ceramics were investigated by X-ray diffraction, scanning electron microscopy, and mechanical testing, respectively. The results show that the additive of ZrO2 has the best reinforcing effect on the flexural strength of the mica glass-ceramics. The smaller powder particles and the larger forming pressure result in the larger bulk density of the mica glass-ceramics samples. The main crystallite phases of samples with ZrO2 as additive were phlogopite and quartz with sintering temperature lower than 1120 ℃. The crystal phase of glass ceramics appeared fiberform and cross arranges with good lap. The highest value of flexural strength, 63.7 MPa, was shown on sample with 10wt% ZrO2 as additive and sintering temperature of 1120 ℃.展开更多
基金Project(2003BA310A31) supported by Ministry of Science and Technology, China
文摘The bioactivity of mica/apatite glass ceramic composites, including the in vitro behavior in simulated body fluid and the histological appearance of the interface between the mica/apatite glass ceramics and the rabbit mandible defect in vivo under a dynamic condition. The results show that biological apatite layer forms on the surface of the mica/apatite glass ceramics after 1 d of immersion in the simulated body fluid, and becomes dense after 14 d. In vivo tests indicate that bone formation occurs after implantation for 14 d, and strong bonding of bone to the implant occurs after 42 d. No aseptic loosening occurs during 42 d of implantation. The finding shows that mica/apatite glass ceramics have good bioactivity and osteoconductivity for constructing bone graft, and can be promising for biomedical application.
文摘Mica glass-ceramics were prepared by pressureless sintering with a phlogopite and various additives as raw materials. The effects of CaF2 content, Li2O content, ZrO2 content, and sintering temperature on the microstructure and mechanical properties of the mica glass-ceramics were investigated by X-ray diffraction, scanning electron microscopy, and mechanical testing, respectively. The results show that the additive of ZrO2 has the best reinforcing effect on the flexural strength of the mica glass-ceramics. The smaller powder particles and the larger forming pressure result in the larger bulk density of the mica glass-ceramics samples. The main crystallite phases of samples with ZrO2 as additive were phlogopite and quartz with sintering temperature lower than 1120 ℃. The crystal phase of glass ceramics appeared fiberform and cross arranges with good lap. The highest value of flexural strength, 63.7 MPa, was shown on sample with 10wt% ZrO2 as additive and sintering temperature of 1120 ℃.
