The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent trainin...The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.展开更多
This paper analyzes some problems of the current teaching situation in the course High-level Programming Language,such as the lagging content of the course compared with technology development,the emphasis on theory r...This paper analyzes some problems of the current teaching situation in the course High-level Programming Language,such as the lagging content of the course compared with technology development,the emphasis on theory rather than on practice,the low enthusiasm of students for learning,and the weak practical ability of students.In response to the needs of enterprises for talents under the background of New Engineering,especially the cultivation of students’adaptability and practical abilities towards future industries to improve students’knowledge and problemsolving abilities to keep up with the modern technology,this paper proposes the ways and methods to reform and explore the teaching content and teaching methods by integrating industry and education,assisting teaching according to industrial demands,and lowering technology barriers of new technology.The practical effect is evaluated through a survey in class and the follow-up questionnaire after class,and the results show that the effect of the practice is effective.展开更多
This paper studies and explores the construction of a teaching resource library for landscape engineering under the“4321”industry-education integration system,focusing on the construction objectives,construction pat...This paper studies and explores the construction of a teaching resource library for landscape engineering under the“4321”industry-education integration system,focusing on the construction objectives,construction paths,and construction contents,aiming to open-up the channel of school-enterprise cooperation,improve enterprise participation,and promote the reform of teaching mode and teaching methods.Establishing a practical resource library will connect and integrate students,teachers,and enterprises.A complete library of landscape-oriented teaching resources will be constructed according to the talent portraits of the industry to open-up the relationship between upstream and downstream courses,and further improve the precise fit between the cultivation of applied undergraduate talents and enterprises.展开更多
Plain concrete is strong in compression but brittle in tension,having a low tensile strain capacity that can significantly degrade the long-term performance of concrete structures,even when steel reinforcing is presen...Plain concrete is strong in compression but brittle in tension,having a low tensile strain capacity that can significantly degrade the long-term performance of concrete structures,even when steel reinforcing is present.In order to address these challenges,short polymer fibers are randomly dispersed in a cement-based matrix to forma highly ductile engineered cementitious composite(ECC).Thismaterial exhibits high ductility under tensile forces,with its tensile strain being several hundred times greater than conventional concrete.Since concrete is inherently weak in tension,the tensile strain capacity(TSC)has become one of the most extensively researched properties.As a result,developing a model to predict the TSC of the ECC and to optimize the mixture proportions becomes challenging.Meanwhile,the effort required for laboratory trial batches to determine the TSC is reduced.To achieve the research objectives,five distinct models,artificial neural network(ANN),nonlinear model(NLR),linear relationship model(LR),multi-logistic model(MLR),and M5P-tree model(M5P),are investigated and employed to predict the TSCof ECCmixtures containing fly ash.Data from115 mixtures are gathered and analyzed to develop a new model.The input variables include mixture proportions,fiber length and diameter,and the time required for curing the various mixtures.The model’s effectiveness is evaluated and verified based on statistical parameters such as R2,mean absolute error(MAE),scatter index(SI),root mean squared error(RMSE),and objective function(OBJ)value.Consequently,the ANN model outperforms the others in predicting the TSC of the ECC,with RMSE,MAE,OBJ,SI,and R2 values of 0.42%,0.3%,0.33%,0.135%,and 0.98,respectively.展开更多
Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys...Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys design and development,which enables the design and development of Al alloys to upgrade from traditional empirical to the integration of compositionprocess-structure-mechanical property,thus greatly accelerating its development speed and reducing its development cost.This study combines calculation of phase diagram(CALPHAD),Finite element calculations,first principle calculations,and microstructure characterization methods to predict and regulate the formation and structure of composite precipitates from the design of highmodulus Al alloy compositions and optimize the casting process parameters to inhibit the formation of micropore defects in the casting process,and the final tensile strength of Al alloys reaches420 MPa and Young's modulus reaches more than 88 GPa,which achieves the design goal of the high strength and modulus Al alloys,and establishes a new mode of the design and development of the strength/modulus Al alloys.展开更多
With the continuous development of power electronic devices,intelligent control systems,and other technologies,the voltage level and transmission capacity of voltage source converter (VSC)-high-voltage direct current ...With the continuous development of power electronic devices,intelligent control systems,and other technologies,the voltage level and transmission capacity of voltage source converter (VSC)-high-voltage direct current (HVDC) technology will continue to increase,while the system losses and costs will gradually decrease.Therefore,it can be foreseen that VSC-HVDC transmission technology will be more widely applied in future large-scale renewable energy development projects.Adopting VSC-HVDC transmission technology can be used to overcome issues encountered by large-scale renewable energy transmission and integration projects,such as a weak local power grid,lack of support for synchronous power supply,and insufficient accommodation capacity.However,this solution also faces many technical challenges because of the differences between renewable energy and traditional synchronous power generation systems.Based on actual engineering practices that are used worldwide,this article analyzes the technical challenges encountered by integrating large-scale renewable energy systems that adopt the use of VSC-HVDC technology,while aiming to provide support for future research and engineering projects related to VSC-HVDC-based large-scale renewable energy integration projects.展开更多
Machining process data is the core of computer aided process planning application systems.It is also provides essen- tial content for product life cycle engineering.The character of CAPP that supports product LCE and ...Machining process data is the core of computer aided process planning application systems.It is also provides essen- tial content for product life cycle engineering.The character of CAPP that supports product LCE and virtual manufacturing is an- alyzed.The structure and content of machining process data concerning green manufacturing is also examined.A logic model of Machining Process Data has been built based on an object oriented approach,using UML technology and a physical model of machin- ing process data that utilizes XML technology.To realize the integration of design and process,an approach based on graph-based volume decomposition was apposed.Instead,to solve the problem of generation in the machining process,case-based reasoning and rule-based reasoning have been applied synthetically.Finally,the integration framework and interface that deal with the CAPP integration with CAD,CAM,PDM,and ERP are discussed.展开更多
In this paper,the Web-based integration methodology and framework have been developed to facilitate collabora- tive and concurrent engineering design in distributed manufacturing environments.The distributed concurren...In this paper,the Web-based integration methodology and framework have been developed to facilitate collabora- tive and concurrent engineering design in distributed manufacturing environments.The distributed concurrent engineering and co- design are discussed as key components in the mechanism.The related integration system is presented,which includes four function- al modules:co-design,Web-based visualization,manufacturing analysis and look-up service.It can be used for a design team geo- graphically distributed to organize a collaborative and concurrent engineering design effectively.In particular,the collaborative mechanism incorporated with Java-based and Internet-enabled technologies can generate extended strategies for design and planning. Thus,the proposed integration architecture enables the system to be generic,open and scalable.Finally,for the trend of global manufacturing,a case study of Internet-enabled collaborative optimization is introduced and a discussion on teamwork capability is made.展开更多
Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on th...Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on the analysis of practical requirements for product development process management for CE, a CORBA-based integration platform of product development process management (IP-PDPM) is designed and developed. The design principles for IP-PDPM are described. The system architecture and functions of the platform are given, the key technologies for the implementation of IP-PDPM are presented, the application integration mechanism and its implementation techniques are also detailed.展开更多
In today’s era,multidisciplinary integration is the development trend of education,which breaks the field of a single discipline and lays the foundation for the development of education.Objectively speaking,with the ...In today’s era,multidisciplinary integration is the development trend of education,which breaks the field of a single discipline and lays the foundation for the development of education.Objectively speaking,with the integration of disciplines,a new interdisciplinary is formed.This new discipline is comprehensive and systematic;in addition,it integrates knowledge,technology,and methods.It is the result of the collision of different disciplines.As an applied course,Management Science and Engineering integrates multidisciplinary knowledge,such as science and technology,information science,and mathematics.Its main purpose is to solve various problems in social and economic development.It has a long-term impact on the development of contemporary multidisciplinary education.In the new era,in order to meet the requirements of social and economic development,the teaching of Management Science and Engineering should be based on the perspective of multidisciplinary integration,combined with the current characteristics and training mode of the discipline,explore new talent training paths,and then drive the development of the whole industry.展开更多
This paper studies the potential effects of agricultural enterprise's vertical integration and reverse engineering on downstream firms.Suppliers who invest reverse engineering technology can exploit customer's...This paper studies the potential effects of agricultural enterprise's vertical integration and reverse engineering on downstream firms.Suppliers who invest reverse engineering technology can exploit customer's information. An integrated supplier can obtain at no cost the information from its subsidiary. Based on repeated game and considered corporate " good" or " bad" type,this paper analysis supplier's selection and downstream investment in innovation. The results showed that: when the cost is higher than the threshold value no company invest in reverse engineering,when the cost is lower than the threshold value the integration company invest in reverse engineering; in the second period,vertical integration reduce the downstream independent enterprise's innovation investment and profits,integrated enterprise increase innovation investment and profits; during the first period of the game,the independent downstream firms being " completely foreclosure".展开更多
In this work,a method is put forward to obtain the dynamic solution efficiently and accurately for a large-scale train-track-substructure(TTS)system.It is called implicit-explicit integration and multi-time-step solut...In this work,a method is put forward to obtain the dynamic solution efficiently and accurately for a large-scale train-track-substructure(TTS)system.It is called implicit-explicit integration and multi-time-step solution method(abbreviated as mI-nE-MTS method).The TTS system is divided into train-track subsystem and substruc-ture subsystem.Considering that the root cause of low effi-ciency of obtaining TTS solution lies in solving the alge-braic equation of the substructures,the high-efficient Zhai method,an explicit integration scheme,can be introduced to avoid matrix inversion process.The train-track system is solved by implicitly Park method.Moreover,it is known that the requirement of time step size differs for different sub-systems,integration methods and structural frequency response characteristics.A multi-time-step solution is pro-posed,in which time step size for the train-track subsystem and the substructure subsystem can be arbitrarily chosen once satisfying stability and precision demand,namely the time spent for m implicit integral steps is equal to n explicit integral steps,i.e.,mI=nE as mentioned above.The numeri-cal examples show the accuracy,efficiency,and engineering practicality of the proposed method.展开更多
A data identifier(DID)is an essential tag or label in all kinds of databases—particularly those related to integrated computational materials engineering(ICME),inheritable integrated intelligent manufacturing(I3M),an...A data identifier(DID)is an essential tag or label in all kinds of databases—particularly those related to integrated computational materials engineering(ICME),inheritable integrated intelligent manufacturing(I3M),and the Industrial Internet ofThings.With the guidance and quick acceleration of the developme nt of advanced materials,as envisioned by official documents worldwide,more investigations are required to construct relative numerical standards for material informatics.This work proposes a universal DID format consisting of a set of build chains,which aligns with the classical form of identifier in both international and national standards,such as ISO/IEC 29168-1:2000,GB/T 27766-2011,GA/T 543.2-2011,GM/T 0006-2012,GJB 7365-2011,SL 325-2014,SL 607-201&WS 363.2-2011,and QX/T 39-2005.Each build chain is made up of capital letters and numbers,with no symbols.Moreover,the total length of each build chain is not restricted,which follows the formation of the Universal Coded Character Set in the international standard of ISO/IEC 10646.Based on these rules,the proposed DID is flexible and convenient for extendi ng and sharing in and between various cloud-based platforms.Accordingly,classical two-dimensional(2D)codes,including the Hanxin Code,Lots Perception Matrix(LP)Code,Quick Response(Q.R)code,Grid Matrix(GM)code,and Data Matrix(DM)Code,can be constructed and precisely recognized and/or decoded by either smart phones or specific machines.By utilizing these 2D codes as the fingerprints of a set of data linked with cloud-based platforms,progress and updates in the composition-processing-structure-property-performance workflow process can be tracked spontaneously,paving a path to accelerate the discovery and manufacture of advanced materials and enhance research productivity,performance,and collaboration.展开更多
In this paper a case study is presented where refined 3D reservoir geology models, well pattern pilot test and Real-time GeoSteering tools have been integrated to optimize production performance of a viscous oil reser...In this paper a case study is presented where refined 3D reservoir geology models, well pattern pilot test and Real-time GeoSteering tools have been integrated to optimize production performance of a viscous oil reserve. The viscous reserves were of high structural dip angle. In addition delta depositional system represented highly variable geomorphology, where stacked sandbodies and shale bedding are crossing each other frequently. In order to keep a higher production rate, using horizontal wells along with water injection was not enough;therefore, detailed reservoir characterization, well pattern pilot experiment and GeoSteering were used to optimize previous development strategy and keep horizontal trajectories safely landing into reservoir target zone. The stratigraphic sequence architecture that is derived from seismic interpretations captured the variation within these high dip structural backgrounds very effectively. The best combination of choices was “Injecting Water outside from OWC” and “Stair Shaped Horizontal Trajectories”. The borehole collision risks of these optimized strategies were then analyzed and controlled successfully by the GeoSteering tools during trajectory landing process. The reservoir development performance is improved tremendously as result of these renewed development strategies.展开更多
The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces...The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has signif- icant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and inte- grated finishing and strengthening technologies and dis- cusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.展开更多
With the arrival of the intelligence era of Industry 4.0,social development has shown complex and diversified characteristics,gradually forming an innovation ecological environment constructed by vertical interaction ...With the arrival of the intelligence era of Industry 4.0,social development has shown complex and diversified characteristics,gradually forming an innovation ecological environment constructed by vertical interaction of multi-layer innovation systems and horizontal collaboration of multiple organizations and departments,which has posed extremely challenging requirements for higher engineering education to cultivate engineering talents with comprehensive engineering qualities who can solve complex engineering problems.However,practical engineering problems may involve a complex knowledge chain of interdisciplinary and multi-disciplinary cross-coupling.Therefore,higher engineering education needs to form a new interdisciplinary and multi-disciplinary integrated engineering innovation talent training system.Based on the characteristics of the mechanical and electronic engineering major,we will reshape and reconstruct the core courses of the mechanical and electronic engineering major.Two core courses are formed:Drive and Measurement and Control I and Drive and Measurement and Control II,with information flow and energy flow as the main lines,following up with the comprehensive practical curriculum system based on the unity of knowledge and practice and ability-oriented thinking,supporting teaching objectives,promoting students’individual development,and providing guidelines for relevant curriculum reforms.展开更多
This paper presented a model of integrated reverse engineering system and set up its various data output flowchart, which is easy to be associated with other systems. The idea of integrated reverse engineer is introdu...This paper presented a model of integrated reverse engineering system and set up its various data output flowchart, which is easy to be associated with other systems. The idea of integrated reverse engineer is introduced to the system of forming sheet metal with complex surface and using IDEF0 method sets up the function model of the system. The freeform surface reconstruction and CAD modeling of the system are described and decomposed. This paper discussed some problems, such as the feature expression, feature modeling and feature translation of the sheet parts and dies.展开更多
We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use...We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use the advantages of BIM+virtual simulation technology,design a scientific and reasonable practical teaching content of Road Engineering Construction Technology and Organization,and address the contrast between the strong practical aspect of the traditional Road Engineering Construction Technology and Organization course and the lack of practical instruments in hope to improve students’learning autonomy,enhance the quality of practical teaching,achieve the training objectives of the course,and nurture applied technical talents.展开更多
Integrated standardization is one of the fundamenta l forms of modern standardization. It is the combination of system science and the content of standardization. The development of system science has provided theo re...Integrated standardization is one of the fundamenta l forms of modern standardization. It is the combination of system science and the content of standardization. The development of system science has provided theo retic foundation and precondition for integrated standardization. The relevant r esearch on integrated standardization and system engineering illustrate that int egrated standardization is a advanced method which presented with the developmen t of modern science and technology . Integrated standardization treat the re levant factors of standardization as a system, and wholly standarlize the factor s in order to reach the best level of technology and quality. Integrated standardization is a large system engineering. In modern industr y the contact among different departments is being constantly enlarged and t he complexity of product is being constantly increased. This situation demands s trict correspond and united request in all the following aspects: raw mate rial, organs, fittings, technical measures of production, preparation for produc tion, ways of organizing the production. The traditional measure which establish the respective standard separately must be replaced by multi-spetialty standa rdization in large spectrum. The current situation and the development of syste m science has provided theoretic foundation and precondition for this kind of st andardization. Product or project can be managed with system engineering of proj ect, while the correspond standardization can be managed with system engineering of standardization. Integrated standardization virtually is system engineering of standardization, w hich use the theory to deal with the problem about standardization . This thesis included 3 chapters: 1. the brief summary of integrated standardization and sys tem engineering management in the development of type in foreign countries; 2. t he current situation and existing problems in the development of products; 3. ho w to organize and actualize integrated standardization and system engineering ma nagement in the development of products.展开更多
文摘The core education function of higher vocational colleges is to train technical talents with high quality,so as to meet the needs of talents in the development stage of our society.Under the guidance of talent training,higher vocational colleges need to pay attention to establishing an all-round and three-dimensional education model,and promote innovation of higher vocational education on the basis of this.It is also a way to promote the innovation of higher vocational education to vigorously promote the construction of“post,course,competition,certificate”mode in the construction of education mode.Through the construction of“post,course,competition,certificate”mode,the education mode of higher vocational colleges is gradually improved,so as to strengthen the effectiveness of talent training in higher vocational colleges.Therefore,in this paper,the author puts forward some suggestions to promote the construction of the integrated education mode of the electronic information engineering technology major in higher vocational colleges,so as to help improve the talent training level of higher vocational colleges.
文摘This paper analyzes some problems of the current teaching situation in the course High-level Programming Language,such as the lagging content of the course compared with technology development,the emphasis on theory rather than on practice,the low enthusiasm of students for learning,and the weak practical ability of students.In response to the needs of enterprises for talents under the background of New Engineering,especially the cultivation of students’adaptability and practical abilities towards future industries to improve students’knowledge and problemsolving abilities to keep up with the modern technology,this paper proposes the ways and methods to reform and explore the teaching content and teaching methods by integrating industry and education,assisting teaching according to industrial demands,and lowering technology barriers of new technology.The practical effect is evaluated through a survey in class and the follow-up questionnaire after class,and the results show that the effect of the practice is effective.
基金“Research on the Construction of Teaching Resource Library under the“4321”Industry-Education Integration System-Taking the Environmental Design Major as an Example”Chongqing Institute of Technology Education and Teaching Reform Research Project(Project number:JY2022308)。
文摘This paper studies and explores the construction of a teaching resource library for landscape engineering under the“4321”industry-education integration system,focusing on the construction objectives,construction paths,and construction contents,aiming to open-up the channel of school-enterprise cooperation,improve enterprise participation,and promote the reform of teaching mode and teaching methods.Establishing a practical resource library will connect and integrate students,teachers,and enterprises.A complete library of landscape-oriented teaching resources will be constructed according to the talent portraits of the industry to open-up the relationship between upstream and downstream courses,and further improve the precise fit between the cultivation of applied undergraduate talents and enterprises.
文摘Plain concrete is strong in compression but brittle in tension,having a low tensile strain capacity that can significantly degrade the long-term performance of concrete structures,even when steel reinforcing is present.In order to address these challenges,short polymer fibers are randomly dispersed in a cement-based matrix to forma highly ductile engineered cementitious composite(ECC).Thismaterial exhibits high ductility under tensile forces,with its tensile strain being several hundred times greater than conventional concrete.Since concrete is inherently weak in tension,the tensile strain capacity(TSC)has become one of the most extensively researched properties.As a result,developing a model to predict the TSC of the ECC and to optimize the mixture proportions becomes challenging.Meanwhile,the effort required for laboratory trial batches to determine the TSC is reduced.To achieve the research objectives,five distinct models,artificial neural network(ANN),nonlinear model(NLR),linear relationship model(LR),multi-logistic model(MLR),and M5P-tree model(M5P),are investigated and employed to predict the TSCof ECCmixtures containing fly ash.Data from115 mixtures are gathered and analyzed to develop a new model.The input variables include mixture proportions,fiber length and diameter,and the time required for curing the various mixtures.The model’s effectiveness is evaluated and verified based on statistical parameters such as R2,mean absolute error(MAE),scatter index(SI),root mean squared error(RMSE),and objective function(OBJ)value.Consequently,the ANN model outperforms the others in predicting the TSC of the ECC,with RMSE,MAE,OBJ,SI,and R2 values of 0.42%,0.3%,0.33%,0.135%,and 0.98,respectively.
基金supported by the National Natural Science Foundation of China(No.52073030)。
文摘Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys design and development,which enables the design and development of Al alloys to upgrade from traditional empirical to the integration of compositionprocess-structure-mechanical property,thus greatly accelerating its development speed and reducing its development cost.This study combines calculation of phase diagram(CALPHAD),Finite element calculations,first principle calculations,and microstructure characterization methods to predict and regulate the formation and structure of composite precipitates from the design of highmodulus Al alloy compositions and optimize the casting process parameters to inhibit the formation of micropore defects in the casting process,and the final tensile strength of Al alloys reaches420 MPa and Young's modulus reaches more than 88 GPa,which achieves the design goal of the high strength and modulus Al alloys,and establishes a new mode of the design and development of the strength/modulus Al alloys.
基金State Grid Corporation of China Science and Technology Project: Research on Power Transmission of Largescale Renewable Energy Base by VSC-LCC hybrid HVDC(No. NY71-19-037)
文摘With the continuous development of power electronic devices,intelligent control systems,and other technologies,the voltage level and transmission capacity of voltage source converter (VSC)-high-voltage direct current (HVDC) technology will continue to increase,while the system losses and costs will gradually decrease.Therefore,it can be foreseen that VSC-HVDC transmission technology will be more widely applied in future large-scale renewable energy development projects.Adopting VSC-HVDC transmission technology can be used to overcome issues encountered by large-scale renewable energy transmission and integration projects,such as a weak local power grid,lack of support for synchronous power supply,and insufficient accommodation capacity.However,this solution also faces many technical challenges because of the differences between renewable energy and traditional synchronous power generation systems.Based on actual engineering practices that are used worldwide,this article analyzes the technical challenges encountered by integrating large-scale renewable energy systems that adopt the use of VSC-HVDC technology,while aiming to provide support for future research and engineering projects related to VSC-HVDC-based large-scale renewable energy integration projects.
文摘Machining process data is the core of computer aided process planning application systems.It is also provides essen- tial content for product life cycle engineering.The character of CAPP that supports product LCE and virtual manufacturing is an- alyzed.The structure and content of machining process data concerning green manufacturing is also examined.A logic model of Machining Process Data has been built based on an object oriented approach,using UML technology and a physical model of machin- ing process data that utilizes XML technology.To realize the integration of design and process,an approach based on graph-based volume decomposition was apposed.Instead,to solve the problem of generation in the machining process,case-based reasoning and rule-based reasoning have been applied synthetically.Finally,the integration framework and interface that deal with the CAPP integration with CAD,CAM,PDM,and ERP are discussed.
文摘In this paper,the Web-based integration methodology and framework have been developed to facilitate collabora- tive and concurrent engineering design in distributed manufacturing environments.The distributed concurrent engineering and co- design are discussed as key components in the mechanism.The related integration system is presented,which includes four function- al modules:co-design,Web-based visualization,manufacturing analysis and look-up service.It can be used for a design team geo- graphically distributed to organize a collaborative and concurrent engineering design effectively.In particular,the collaborative mechanism incorporated with Java-based and Internet-enabled technologies can generate extended strategies for design and planning. Thus,the proposed integration architecture enables the system to be generic,open and scalable.Finally,for the trend of global manufacturing,a case study of Internet-enabled collaborative optimization is introduced and a discussion on teamwork capability is made.
文摘Product development process management plays an important role in concurrent engineering (CE). The integration platform is a useful tool for effectively supporting the software development and integration. Based on the analysis of practical requirements for product development process management for CE, a CORBA-based integration platform of product development process management (IP-PDPM) is designed and developed. The design principles for IP-PDPM are described. The system architecture and functions of the platform are given, the key technologies for the implementation of IP-PDPM are presented, the application integration mechanism and its implementation techniques are also detailed.
文摘In today’s era,multidisciplinary integration is the development trend of education,which breaks the field of a single discipline and lays the foundation for the development of education.Objectively speaking,with the integration of disciplines,a new interdisciplinary is formed.This new discipline is comprehensive and systematic;in addition,it integrates knowledge,technology,and methods.It is the result of the collision of different disciplines.As an applied course,Management Science and Engineering integrates multidisciplinary knowledge,such as science and technology,information science,and mathematics.Its main purpose is to solve various problems in social and economic development.It has a long-term impact on the development of contemporary multidisciplinary education.In the new era,in order to meet the requirements of social and economic development,the teaching of Management Science and Engineering should be based on the perspective of multidisciplinary integration,combined with the current characteristics and training mode of the discipline,explore new talent training paths,and then drive the development of the whole industry.
基金Fundamental Research Funds for the Central Universities in2013(SWU1309005)Southwest University Doctor Fund(SWU09022)
文摘This paper studies the potential effects of agricultural enterprise's vertical integration and reverse engineering on downstream firms.Suppliers who invest reverse engineering technology can exploit customer's information. An integrated supplier can obtain at no cost the information from its subsidiary. Based on repeated game and considered corporate " good" or " bad" type,this paper analysis supplier's selection and downstream investment in innovation. The results showed that: when the cost is higher than the threshold value no company invest in reverse engineering,when the cost is lower than the threshold value the integration company invest in reverse engineering; in the second period,vertical integration reduce the downstream independent enterprise's innovation investment and profits,integrated enterprise increase innovation investment and profits; during the first period of the game,the independent downstream firms being " completely foreclosure".
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.52008404,U1934217 and 11790283)Science and Technology Research and Development Program Project of China Railway Group Limited(Major Special Project,No.2020-Special-02)the National Natural Science Foundation of Hunan Province(Grant No.2021JJ30850).
文摘In this work,a method is put forward to obtain the dynamic solution efficiently and accurately for a large-scale train-track-substructure(TTS)system.It is called implicit-explicit integration and multi-time-step solution method(abbreviated as mI-nE-MTS method).The TTS system is divided into train-track subsystem and substruc-ture subsystem.Considering that the root cause of low effi-ciency of obtaining TTS solution lies in solving the alge-braic equation of the substructures,the high-efficient Zhai method,an explicit integration scheme,can be introduced to avoid matrix inversion process.The train-track system is solved by implicitly Park method.Moreover,it is known that the requirement of time step size differs for different sub-systems,integration methods and structural frequency response characteristics.A multi-time-step solution is pro-posed,in which time step size for the train-track subsystem and the substructure subsystem can be arbitrarily chosen once satisfying stability and precision demand,namely the time spent for m implicit integral steps is equal to n explicit integral steps,i.e.,mI=nE as mentioned above.The numeri-cal examples show the accuracy,efficiency,and engineering practicality of the proposed method.
基金This work was financially supported by the National Key Research and Development Program of China(2018YFB0703801,2018YFB0703802,2016YFB0701303,and 2016YFB0701304)CRRC Tangshan Co.,Ltd.(201750463031).Special thanks to Professor Hong Wang at Shanghai Jiao Tong University for the fruitful discussions and the constructive suggestions/comments.
文摘A data identifier(DID)is an essential tag or label in all kinds of databases—particularly those related to integrated computational materials engineering(ICME),inheritable integrated intelligent manufacturing(I3M),and the Industrial Internet ofThings.With the guidance and quick acceleration of the developme nt of advanced materials,as envisioned by official documents worldwide,more investigations are required to construct relative numerical standards for material informatics.This work proposes a universal DID format consisting of a set of build chains,which aligns with the classical form of identifier in both international and national standards,such as ISO/IEC 29168-1:2000,GB/T 27766-2011,GA/T 543.2-2011,GM/T 0006-2012,GJB 7365-2011,SL 325-2014,SL 607-201&WS 363.2-2011,and QX/T 39-2005.Each build chain is made up of capital letters and numbers,with no symbols.Moreover,the total length of each build chain is not restricted,which follows the formation of the Universal Coded Character Set in the international standard of ISO/IEC 10646.Based on these rules,the proposed DID is flexible and convenient for extendi ng and sharing in and between various cloud-based platforms.Accordingly,classical two-dimensional(2D)codes,including the Hanxin Code,Lots Perception Matrix(LP)Code,Quick Response(Q.R)code,Grid Matrix(GM)code,and Data Matrix(DM)Code,can be constructed and precisely recognized and/or decoded by either smart phones or specific machines.By utilizing these 2D codes as the fingerprints of a set of data linked with cloud-based platforms,progress and updates in the composition-processing-structure-property-performance workflow process can be tracked spontaneously,paving a path to accelerate the discovery and manufacture of advanced materials and enhance research productivity,performance,and collaboration.
文摘In this paper a case study is presented where refined 3D reservoir geology models, well pattern pilot test and Real-time GeoSteering tools have been integrated to optimize production performance of a viscous oil reserve. The viscous reserves were of high structural dip angle. In addition delta depositional system represented highly variable geomorphology, where stacked sandbodies and shale bedding are crossing each other frequently. In order to keep a higher production rate, using horizontal wells along with water injection was not enough;therefore, detailed reservoir characterization, well pattern pilot experiment and GeoSteering were used to optimize previous development strategy and keep horizontal trajectories safely landing into reservoir target zone. The stratigraphic sequence architecture that is derived from seismic interpretations captured the variation within these high dip structural backgrounds very effectively. The best combination of choices was “Injecting Water outside from OWC” and “Stair Shaped Horizontal Trajectories”. The borehole collision risks of these optimized strategies were then analyzed and controlled successfully by the GeoSteering tools during trajectory landing process. The reservoir development performance is improved tremendously as result of these renewed development strategies.
基金Supported by Science Fund for Creative Research Groups of NSFC(51621064)National Natural Science Foundation of China(Grant No.51475074,11302043)the Fundamental Research Funds for the Central Universities(DUT15QY37)
文摘The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has signif- icant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and inte- grated finishing and strengthening technologies and dis- cusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.
文摘With the arrival of the intelligence era of Industry 4.0,social development has shown complex and diversified characteristics,gradually forming an innovation ecological environment constructed by vertical interaction of multi-layer innovation systems and horizontal collaboration of multiple organizations and departments,which has posed extremely challenging requirements for higher engineering education to cultivate engineering talents with comprehensive engineering qualities who can solve complex engineering problems.However,practical engineering problems may involve a complex knowledge chain of interdisciplinary and multi-disciplinary cross-coupling.Therefore,higher engineering education needs to form a new interdisciplinary and multi-disciplinary integrated engineering innovation talent training system.Based on the characteristics of the mechanical and electronic engineering major,we will reshape and reconstruct the core courses of the mechanical and electronic engineering major.Two core courses are formed:Drive and Measurement and Control I and Drive and Measurement and Control II,with information flow and energy flow as the main lines,following up with the comprehensive practical curriculum system based on the unity of knowledge and practice and ability-oriented thinking,supporting teaching objectives,promoting students’individual development,and providing guidelines for relevant curriculum reforms.
基金The Research Fund for the Doctoral Pro- gram of Higher Education( 2 0 0 0 0 2 4838)
文摘This paper presented a model of integrated reverse engineering system and set up its various data output flowchart, which is easy to be associated with other systems. The idea of integrated reverse engineer is introduced to the system of forming sheet metal with complex surface and using IDEF0 method sets up the function model of the system. The freeform surface reconstruction and CAD modeling of the system are described and decomposed. This paper discussed some problems, such as the feature expression, feature modeling and feature translation of the sheet parts and dies.
基金the Chongqing Engineering College Educational Teaching Reform Research Project“Practical Teaching Research of Road Engineering Construction Technology and Organization Course Based on BIM+Virtual Simulation Technology”(Project No.JY2021310).
文摘We focus on the goal of undergraduate talent training,consider the course features of Road Engineering Construction Technology and Organization,analyze the problems existing in the practical teaching of the course,use the advantages of BIM+virtual simulation technology,design a scientific and reasonable practical teaching content of Road Engineering Construction Technology and Organization,and address the contrast between the strong practical aspect of the traditional Road Engineering Construction Technology and Organization course and the lack of practical instruments in hope to improve students’learning autonomy,enhance the quality of practical teaching,achieve the training objectives of the course,and nurture applied technical talents.
文摘Integrated standardization is one of the fundamenta l forms of modern standardization. It is the combination of system science and the content of standardization. The development of system science has provided theo retic foundation and precondition for integrated standardization. The relevant r esearch on integrated standardization and system engineering illustrate that int egrated standardization is a advanced method which presented with the developmen t of modern science and technology . Integrated standardization treat the re levant factors of standardization as a system, and wholly standarlize the factor s in order to reach the best level of technology and quality. Integrated standardization is a large system engineering. In modern industr y the contact among different departments is being constantly enlarged and t he complexity of product is being constantly increased. This situation demands s trict correspond and united request in all the following aspects: raw mate rial, organs, fittings, technical measures of production, preparation for produc tion, ways of organizing the production. The traditional measure which establish the respective standard separately must be replaced by multi-spetialty standa rdization in large spectrum. The current situation and the development of syste m science has provided theoretic foundation and precondition for this kind of st andardization. Product or project can be managed with system engineering of proj ect, while the correspond standardization can be managed with system engineering of standardization. Integrated standardization virtually is system engineering of standardization, w hich use the theory to deal with the problem about standardization . This thesis included 3 chapters: 1. the brief summary of integrated standardization and sys tem engineering management in the development of type in foreign countries; 2. t he current situation and existing problems in the development of products; 3. ho w to organize and actualize integrated standardization and system engineering ma nagement in the development of products.