The system presented in this paper allows the direct transfer of kinetic energy of a vehicle’s motion to a flywheel and vice-versa. For braking, a cable winds onto a pulley geared to the vehicle’s propulsion drivesh...The system presented in this paper allows the direct transfer of kinetic energy of a vehicle’s motion to a flywheel and vice-versa. For braking, a cable winds onto a pulley geared to the vehicle’s propulsion driveshaft as it unwinds from another pulley geared to the flywheel and then operates in reverse for the transfer of energy in the opposite direction. The cable windings are in one plane resulting in an effective pulley radius that increases when the cable is winding onto it and decreases when unwinding from it. Thus, an increasing driven-to-driving pulley velocity ratio is obtained during a period of energy transfer in either direction. A dynamic analysis simulating the process was developed. Its application is illustrated with a numerical solution based on specific assumed values of system parameters.展开更多
In this paper, the dynamic behavior analysis of the electromechanical coupling characteristics of a flywheel energy storage system （FESS） with a permanent magnet （PM） brushless direct-current （DC） motor （BLDCM...In this paper, the dynamic behavior analysis of the electromechanical coupling characteristics of a flywheel energy storage system （FESS） with a permanent magnet （PM） brushless direct-current （DC） motor （BLDCM） is studied. The Hopf bifurcation theory and nonlinear methods are used to investigate the generation process and mechanism of the coupled dynamic behavior for the average current controlled FESS in the charging mode. First, the universal nonlinear dynamic model of the FESS based on the BLDCM is derived. Then, for a 0.01 kWh/1.6 kW FESS platform in the Key Laboratory of the Smart Grid at Tianjin University, the phase trajectory of the FESS from a stable state towards chaos is presented using numerical and stroboscopic methods, and all dynamic behaviors of the system in this process are captured. The characteristics of the low-frequency oscillation and the mechanism of the Hopf bifurcation are investigated based on the Routh stability criterion and nonlinear dynamic theory. It is shown that the Hopf bifurcation is directly due to the loss of control over the inductor current, which is caused by the system control parameters exceeding certain ranges. This coupling nonlinear process of the FESS affects the stability of the motor running and the efficiency of energy transfer. In this paper, we investigate into the effects of control parameter change on the stability and the stability regions of these parameters based on the averaged-model approach. Furthermore, the effect of the quantization error in the digital control system is considered to modify the stability regions of the control parameters. Finally, these theoretical results are verified through platform experiments.展开更多
Permanent magnet homopolar inductor machine(PMHIM) has attracted much attention in the field of flywheel energy storage system(FESS) due to its merits of simple structure,brushless excitation, and rotor flywheel integ...Permanent magnet homopolar inductor machine(PMHIM) has attracted much attention in the field of flywheel energy storage system(FESS) due to its merits of simple structure,brushless excitation, and rotor flywheel integration. However, the air-gap flux generated by the PM cannot be adjusted, which would cause large electromagnetic losses in the standby operation state of FESS. To solve this problem, a novel mechanically adjusted variable flux permanent magnet homopolar inductor machine with rotating magnetic poles(RMP-PMHIM) is proposed in this paper. The permanent magnet poles are rotated by an auxiliary rotating device and the purpose of changing the air-gap flux is achieved. First, the structure and operation principle of the proposed RMP-PMHIM are explained. Second,the flux weakening principle of the RMP-PMHIM is analyzed and the equivalent magnetic circuit models under different flux weakening states are built. Third, the parameters of the PM and its fixed structure are optimized to obtain the good electromagnetic performance. Fourth, the electromagnetic performance, including the air-gap flux density, back-EMF, flux weakening ability, loss, etc. of the proposed RMP-PMHIM are investigated and compared. Compared with the non-rotating state of the PM of RPM-PMHIM, the air-gap flux density amplitude can be weakened by 99.95% when the PM rotation angle is 90 degrees, and the no-load core loss can be suppressed by 99.98%,which shows that the proposed RPM-PMHIM is a good candidate for the application of FESS.展开更多
A Fe modified Na2WO4 compound was synthesized by a solution impregnation method and was ball-milled with MgH2 to constitute a novel MgH2-Fe2O3/Na2WO4 composite. The effects of the Fe2O3/Na2WO4 additive on the hydrogen...A Fe modified Na2WO4 compound was synthesized by a solution impregnation method and was ball-milled with MgH2 to constitute a novel MgH2-Fe2O3/Na2WO4 composite. The effects of the Fe2O3/Na2WO4 additive on the hydrogen storage properties of MgH2 together with the corresponding mechanism were investigated. At 423 K, within the first 200 seconds, the hydrogen absorption amount of MgH2+20 wt% Fe2O3/Na2WO4 was almost 5 times that of pure MgH2. And at 573 K, its total hydrogen desorption amount was 7 times that for pure MgH2. Meanwhile, its onset dehydrogenation temperature was 110 K lower than that of pure MgH2. It was worth noting that the MgH2+20 wt% Fe/Na2WO4 presented the lower dehydrogenation reaction activation energy(Ea) of 35.9 kJ·mol^-1 compared to that of pure MgH2. The active MgWO4, Mg2 FeH6 and MgO formed during the milling process were responsible for the improvement of the hydrogen storage properties for MgH2.展开更多
通过对风电系统和飞轮储能系统运行特性的分析,针对飞轮转子设计难以安装位置传感器的特殊性问题,提出一种基于自适应非奇异快速终端滑模观测器的飞轮储能无传感器控制策略,提高转子位置角估计精度。此外,针对飞轮储能系统参考功率指令...通过对风电系统和飞轮储能系统运行特性的分析,针对飞轮转子设计难以安装位置传感器的特殊性问题,提出一种基于自适应非奇异快速终端滑模观测器的飞轮储能无传感器控制策略,提高转子位置角估计精度。此外,针对飞轮储能系统参考功率指令滞后的问题,在无传感器控制基础上,引入自适应滤波算法作为飞轮储能控制系统的功率给定,以减小功率指令滞后现象。在Typhoon HIL 602+仿真平台进行实验验证,结果表明:飞轮储能系统运行性能良好,观测器具有优越的估计性能,能满足飞轮快速充放电并有效平滑风电功率波动的控制需求,同时提高储能利用率。展开更多
文摘The system presented in this paper allows the direct transfer of kinetic energy of a vehicle’s motion to a flywheel and vice-versa. For braking, a cable winds onto a pulley geared to the vehicle’s propulsion driveshaft as it unwinds from another pulley geared to the flywheel and then operates in reverse for the transfer of energy in the opposite direction. The cable windings are in one plane resulting in an effective pulley radius that increases when the cable is winding onto it and decreases when unwinding from it. Thus, an increasing driven-to-driving pulley velocity ratio is obtained during a period of energy transfer in either direction. A dynamic analysis simulating the process was developed. Its application is illustrated with a numerical solution based on specific assumed values of system parameters.
基金supported by the National Basic Research Program of China (Grant No. 2009CB2197)the National Natural Science Foundation of China (Grant No. 51177108)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20110032110066)
文摘In this paper, the dynamic behavior analysis of the electromechanical coupling characteristics of a flywheel energy storage system （FESS） with a permanent magnet （PM） brushless direct-current （DC） motor （BLDCM） is studied. The Hopf bifurcation theory and nonlinear methods are used to investigate the generation process and mechanism of the coupled dynamic behavior for the average current controlled FESS in the charging mode. First, the universal nonlinear dynamic model of the FESS based on the BLDCM is derived. Then, for a 0.01 kWh/1.6 kW FESS platform in the Key Laboratory of the Smart Grid at Tianjin University, the phase trajectory of the FESS from a stable state towards chaos is presented using numerical and stroboscopic methods, and all dynamic behaviors of the system in this process are captured. The characteristics of the low-frequency oscillation and the mechanism of the Hopf bifurcation are investigated based on the Routh stability criterion and nonlinear dynamic theory. It is shown that the Hopf bifurcation is directly due to the loss of control over the inductor current, which is caused by the system control parameters exceeding certain ranges. This coupling nonlinear process of the FESS affects the stability of the motor running and the efficiency of energy transfer. In this paper, we investigate into the effects of control parameter change on the stability and the stability regions of these parameters based on the averaged-model approach. Furthermore, the effect of the quantization error in the digital control system is considered to modify the stability regions of the control parameters. Finally, these theoretical results are verified through platform experiments.
基金supported in part by the National Natural Science Foundation of China under Grant 52007055in part by the Natural Science Foundation of Hunan Province of China under Grant 2021JJ40099。
文摘Permanent magnet homopolar inductor machine(PMHIM) has attracted much attention in the field of flywheel energy storage system(FESS) due to its merits of simple structure,brushless excitation, and rotor flywheel integration. However, the air-gap flux generated by the PM cannot be adjusted, which would cause large electromagnetic losses in the standby operation state of FESS. To solve this problem, a novel mechanically adjusted variable flux permanent magnet homopolar inductor machine with rotating magnetic poles(RMP-PMHIM) is proposed in this paper. The permanent magnet poles are rotated by an auxiliary rotating device and the purpose of changing the air-gap flux is achieved. First, the structure and operation principle of the proposed RMP-PMHIM are explained. Second,the flux weakening principle of the RMP-PMHIM is analyzed and the equivalent magnetic circuit models under different flux weakening states are built. Third, the parameters of the PM and its fixed structure are optimized to obtain the good electromagnetic performance. Fourth, the electromagnetic performance, including the air-gap flux density, back-EMF, flux weakening ability, loss, etc. of the proposed RMP-PMHIM are investigated and compared. Compared with the non-rotating state of the PM of RPM-PMHIM, the air-gap flux density amplitude can be weakened by 99.95% when the PM rotation angle is 90 degrees, and the no-load core loss can be suppressed by 99.98%,which shows that the proposed RPM-PMHIM is a good candidate for the application of FESS.
基金Funded by the National Natural Science Foundation of China(No.51771164)Scientific Research Projects in Colleges and Universities in Hebei Province,China(No.ZD2019307)+2 种基金the Fundamental Research Funds for the Central Universities(No.3142019013)the Natural Science Foundation of Hebei Province of China(No.E2019508214)the Program for Top-notch Young Talents in University of Hebei Province(No.BJ2016043)
文摘A Fe modified Na2WO4 compound was synthesized by a solution impregnation method and was ball-milled with MgH2 to constitute a novel MgH2-Fe2O3/Na2WO4 composite. The effects of the Fe2O3/Na2WO4 additive on the hydrogen storage properties of MgH2 together with the corresponding mechanism were investigated. At 423 K, within the first 200 seconds, the hydrogen absorption amount of MgH2+20 wt% Fe2O3/Na2WO4 was almost 5 times that of pure MgH2. And at 573 K, its total hydrogen desorption amount was 7 times that for pure MgH2. Meanwhile, its onset dehydrogenation temperature was 110 K lower than that of pure MgH2. It was worth noting that the MgH2+20 wt% Fe/Na2WO4 presented the lower dehydrogenation reaction activation energy(Ea) of 35.9 kJ·mol^-1 compared to that of pure MgH2. The active MgWO4, Mg2 FeH6 and MgO formed during the milling process were responsible for the improvement of the hydrogen storage properties for MgH2.
文摘通过对风电系统和飞轮储能系统运行特性的分析,针对飞轮转子设计难以安装位置传感器的特殊性问题,提出一种基于自适应非奇异快速终端滑模观测器的飞轮储能无传感器控制策略,提高转子位置角估计精度。此外,针对飞轮储能系统参考功率指令滞后的问题,在无传感器控制基础上,引入自适应滤波算法作为飞轮储能控制系统的功率给定,以减小功率指令滞后现象。在Typhoon HIL 602+仿真平台进行实验验证,结果表明:飞轮储能系统运行性能良好,观测器具有优越的估计性能,能满足飞轮快速充放电并有效平滑风电功率波动的控制需求,同时提高储能利用率。
