Carbon dioxide(CO2) flooding is one of the most globally used EOR processes to enhance oil recovery.However,the low gas viscosity and density result in gas channeling and gravity override which lead to poor sweep effi...Carbon dioxide(CO2) flooding is one of the most globally used EOR processes to enhance oil recovery.However,the low gas viscosity and density result in gas channeling and gravity override which lead to poor sweep efficiency.Foam application for mobility control is a promising technology to increase the gas viscosity,lower the mobility and improve the sweep efficiency in the reservoir.Foam is generated in the reservoir by co-injection of surfactant solutions and gas.Although there are many surfactants that can be used for such purpose,their performance with supercritical CO2(ScCO2) is weak causing poor or loss of mobility control.This experimental study evaluates a newly developed surfactant(CNF) that was introduced for ScCO2 mobility control in comparison with a common foaming agent,anionic alpha olefin sulfonate(AOS) surfactant.Experimental work was divided into three stages:foam static tests,interfacial tension measurements,and foam dynamic tests.Both surfactants were investigated at different conditions.In general,results show that both surfactants are good foaming agents to reduce the mobility of ScCO2 with better performance of CNF surfactant.Shaking tests in the presence of crude oil show that the foam life for CNF extends to more than 24 h but less than that for AOS.Moreover,CNF features lower critical micelle concentration(CMC),higher adsorption,and smaller area/molecule at the liquid-air interface.Furthermore,entering,spreading,and bridging coefficients indicate that CNF surfactant produces very stable foam with light crude oil in both deionized and saline water,whereas AOS was stable only in deionized water.At all conditions for mobility reduction evaluation,CNF exhibits stronger flow resistance,higher foam viscosity,and higher mobility reduction factor than that of AOS surfactant.In addition,CNF and ScCO2 simultaneous injection produced 8.83% higher oil recovery than that of the baseline experiment and 7.87% higher than that of AOS.Pressure drop profiles for foam flooding using CNF was slightly higher than that of AOS indicating that CNF is better in terms of foam-oil tolerance which resulted in higher oil recovery.展开更多
In order to effectively control the dust in the underground coal mine,this study proposes and develops a new technology for dust control by foam,and briefly demonstrates the advantage of the foam technology for dust c...In order to effectively control the dust in the underground coal mine,this study proposes and develops a new technology for dust control by foam,and briefly demonstrates the advantage of the foam technology for dust control,such as the good isolation performance,large contact area,high wetting ability,strong adhesion and so on.Besides,the details of the technology are introduced,including the foam agent,foam generator,and foam production process.Then the paper studies the relationship between the foaming agent concentration and liquid surface tension,and explains the principle of the foam generator.The technology is applied in heading face.The application results show that the foam has a remarkable effect on dust control in underground coal mines.展开更多
Facing problems with oil production decreasing quickly and water content increasing gradually in S103 well area, the Foam Profile Control was studied on the basis of its confirmed agent formula. The facies-controlled ...Facing problems with oil production decreasing quickly and water content increasing gradually in S103 well area, the Foam Profile Control was studied on the basis of its confirmed agent formula. The facies-controlled geological model of S103 well area was generated using random model based on Petrel software and using numerical simulation based on CMG software. Gas liquid alternating injection pattern was optimized as the optimal solution through the simulation optimization. Two months are optimized as the optimal solution through the simulation optimization. The cumulative oil production is 0.933 × 107 kg which is higher than the value of subsequent water flooding and the other three. Finally, it reaches the goals of slowing down the production decline and controlling the water rising.展开更多
In view of the rapid decline rate of oil production and gradual increase of water cut in oil wells in Block S, based on the determination of the formula of foam profile control agent, the optimization study of foam pr...In view of the rapid decline rate of oil production and gradual increase of water cut in oil wells in Block S, based on the determination of the formula of foam profile control agent, the optimization study of foam profile control injection scheme was carried out. Petrel software is used to establish a facies controlled geological model based on stochastic modeling method in Block S, and CMG software is used for numerical simulation to design 7 sets of foam profile control prediction schemes. Dynamic data and numerical simulation methods are used to optimize foam injection mode and injection cycle. By simulating and calculating, the optimal injection method of alternating gas and liquid injection and the optimal plan with an injection period of 2 months were selected. Through the calculation results of various research plans, it can be seen that the water content of the optimal plan has decreased significantly, and the oil production rate has increased significantly, in order to slow down production decline, control water content rise, extend the economic recovery period of the oilfield, and achieve the goal of improving oil recovery.展开更多
A novel bioactive foam emulsion bioreactor for benzene,toluene and xylene(BTX)contaminated air streams treatment has been developed.The gas-liquid interfacial area by biocompatible foam and driving force for mass tran...A novel bioactive foam emulsion bioreactor for benzene,toluene and xylene(BTX)contaminated air streams treatment has been developed.The gas-liquid interfacial area by biocompatible foam and driving force for mass transfer by a water immiscible organic phase were increased in this reactor.The effect of several parameters such as gas residence time,oxygen content,and organic phase concentration on bioreactor performance was studied. Experimental results showed an average elimination capacity(EC)of 220 g·m3·h -1with removal efficiency(RE) of 89.59%for BTX inlet concentration of 1 g·m3at 15 s gas residence time in the bioreactor.The statistical developed model predicted that the maximum elimination capacity of the reactor for BTX could be reached to 423.45 g·m3·h -1.Continues operation of the bioreactor with high EC and RE was demonstrated by optimizing the operational parameters of the bioreactor.Overall the results suggest that the bioreactor developed can be very effective systems to treat BTX vapors.展开更多
Mine dust is one of the main hazards in underground longwall mines worldwide.In order to solve the mine dust problem,a significant number of studies have been carried out regarding longwall mine dust control,both in C...Mine dust is one of the main hazards in underground longwall mines worldwide.In order to solve the mine dust problem,a significant number of studies have been carried out regarding longwall mine dust control,both in China and Australia.This paper presents a comparative study of dust control practices in Chinese and Australian longwall mines,with particular references to statutory limits,dust monitoring methods and dust management practices,followed by a brief discussion on the research status of longwall mine dust control in both countries.The study shows that water infusion,face ventilation controls,water sprays,and deep and wet cutting in longwall shearer operations are commonly practiced in almost all underground longwall mines and that both Chinese and Australian longwall mine dust control practices have their own advantages and disadvantages.It is concluded that there is a need for further development and innovative design of more effective dust mitigation products or systems despite the development of various dust control technologies.Based on the examinations and discussions,the authors have made some recommendations for further research and development in dust control in longwall mines.It is hoped that this comparative study will provide beneficial guidance for scholars and engineers who are engaging in longwall mine dust control research and practice.展开更多
To recover coal resources that have been damaged by traditional mining methods and ensure stability of the lower roadway in a small pit goaf,the goaf area must be filled and reinforced.In this research,the 1202 workin...To recover coal resources that have been damaged by traditional mining methods and ensure stability of the lower roadway in a small pit goaf,the goaf area must be filled and reinforced.In this research,the 1202 working face of the Hanzui mine is considered as an example for classifying the roof of the mining tunnel under the small kiln destruction zone,the effect of the goaf on the roadway is determined based on the radio tunnel penetration method,a mechanical model to determine the roof filling control mechanism was established,and the duct foaming system and roof filling process were designed.The results show that the scope and degree of influence of the goaf on the mining lane are large,but safe tunneling can be ensured through the use of a steel shed and advanced grouting techniques.When the roof conditions are not similar,materials with different filling heights and filling strengths can be used to control the roof filling of the roadway.By combining field experience and laboratory tests,it was determined that a high-foaming material with a water-cement ratio of 1:0.6,a suitable high-foaming additive,and a water volume ratio of 1:30 is cost-efficient for filling and meets the filling strength requirements.Finally,the reliability of the proposed technology was verified by field experiments,which provide a reference for filling operations in similar mines.展开更多
文摘Carbon dioxide(CO2) flooding is one of the most globally used EOR processes to enhance oil recovery.However,the low gas viscosity and density result in gas channeling and gravity override which lead to poor sweep efficiency.Foam application for mobility control is a promising technology to increase the gas viscosity,lower the mobility and improve the sweep efficiency in the reservoir.Foam is generated in the reservoir by co-injection of surfactant solutions and gas.Although there are many surfactants that can be used for such purpose,their performance with supercritical CO2(ScCO2) is weak causing poor or loss of mobility control.This experimental study evaluates a newly developed surfactant(CNF) that was introduced for ScCO2 mobility control in comparison with a common foaming agent,anionic alpha olefin sulfonate(AOS) surfactant.Experimental work was divided into three stages:foam static tests,interfacial tension measurements,and foam dynamic tests.Both surfactants were investigated at different conditions.In general,results show that both surfactants are good foaming agents to reduce the mobility of ScCO2 with better performance of CNF surfactant.Shaking tests in the presence of crude oil show that the foam life for CNF extends to more than 24 h but less than that for AOS.Moreover,CNF features lower critical micelle concentration(CMC),higher adsorption,and smaller area/molecule at the liquid-air interface.Furthermore,entering,spreading,and bridging coefficients indicate that CNF surfactant produces very stable foam with light crude oil in both deionized and saline water,whereas AOS was stable only in deionized water.At all conditions for mobility reduction evaluation,CNF exhibits stronger flow resistance,higher foam viscosity,and higher mobility reduction factor than that of AOS surfactant.In addition,CNF and ScCO2 simultaneous injection produced 8.83% higher oil recovery than that of the baseline experiment and 7.87% higher than that of AOS.Pressure drop profiles for foam flooding using CNF was slightly higher than that of AOS indicating that CNF is better in terms of foam-oil tolerance which resulted in higher oil recovery.
基金The financial support by the National Natural Science Foundation of China (No.51104153)the Fundamental Research Fundsfor the Central Universities (No.2011QNB11)
文摘In order to effectively control the dust in the underground coal mine,this study proposes and develops a new technology for dust control by foam,and briefly demonstrates the advantage of the foam technology for dust control,such as the good isolation performance,large contact area,high wetting ability,strong adhesion and so on.Besides,the details of the technology are introduced,including the foam agent,foam generator,and foam production process.Then the paper studies the relationship between the foaming agent concentration and liquid surface tension,and explains the principle of the foam generator.The technology is applied in heading face.The application results show that the foam has a remarkable effect on dust control in underground coal mines.
文摘Facing problems with oil production decreasing quickly and water content increasing gradually in S103 well area, the Foam Profile Control was studied on the basis of its confirmed agent formula. The facies-controlled geological model of S103 well area was generated using random model based on Petrel software and using numerical simulation based on CMG software. Gas liquid alternating injection pattern was optimized as the optimal solution through the simulation optimization. Two months are optimized as the optimal solution through the simulation optimization. The cumulative oil production is 0.933 × 107 kg which is higher than the value of subsequent water flooding and the other three. Finally, it reaches the goals of slowing down the production decline and controlling the water rising.
文摘In view of the rapid decline rate of oil production and gradual increase of water cut in oil wells in Block S, based on the determination of the formula of foam profile control agent, the optimization study of foam profile control injection scheme was carried out. Petrel software is used to establish a facies controlled geological model based on stochastic modeling method in Block S, and CMG software is used for numerical simulation to design 7 sets of foam profile control prediction schemes. Dynamic data and numerical simulation methods are used to optimize foam injection mode and injection cycle. By simulating and calculating, the optimal injection method of alternating gas and liquid injection and the optimal plan with an injection period of 2 months were selected. Through the calculation results of various research plans, it can be seen that the water content of the optimal plan has decreased significantly, and the oil production rate has increased significantly, in order to slow down production decline, control water content rise, extend the economic recovery period of the oilfield, and achieve the goal of improving oil recovery.
文摘A novel bioactive foam emulsion bioreactor for benzene,toluene and xylene(BTX)contaminated air streams treatment has been developed.The gas-liquid interfacial area by biocompatible foam and driving force for mass transfer by a water immiscible organic phase were increased in this reactor.The effect of several parameters such as gas residence time,oxygen content,and organic phase concentration on bioreactor performance was studied. Experimental results showed an average elimination capacity(EC)of 220 g·m3·h -1with removal efficiency(RE) of 89.59%for BTX inlet concentration of 1 g·m3at 15 s gas residence time in the bioreactor.The statistical developed model predicted that the maximum elimination capacity of the reactor for BTX could be reached to 423.45 g·m3·h -1.Continues operation of the bioreactor with high EC and RE was demonstrated by optimizing the operational parameters of the bioreactor.Overall the results suggest that the bioreactor developed can be very effective systems to treat BTX vapors.
基金supported by the Program for New Century Excellent Talents in University of China(No.NCET-10-0770)the financial support provided by the China Scholarship Council(Nos.201306425002&201406425048)the University of Wollongong to pursue study at the University of Wollongong as undergraduate visiting students
文摘Mine dust is one of the main hazards in underground longwall mines worldwide.In order to solve the mine dust problem,a significant number of studies have been carried out regarding longwall mine dust control,both in China and Australia.This paper presents a comparative study of dust control practices in Chinese and Australian longwall mines,with particular references to statutory limits,dust monitoring methods and dust management practices,followed by a brief discussion on the research status of longwall mine dust control in both countries.The study shows that water infusion,face ventilation controls,water sprays,and deep and wet cutting in longwall shearer operations are commonly practiced in almost all underground longwall mines and that both Chinese and Australian longwall mine dust control practices have their own advantages and disadvantages.It is concluded that there is a need for further development and innovative design of more effective dust mitigation products or systems despite the development of various dust control technologies.Based on the examinations and discussions,the authors have made some recommendations for further research and development in dust control in longwall mines.It is hoped that this comparative study will provide beneficial guidance for scholars and engineers who are engaging in longwall mine dust control research and practice.
基金the National Key Basic Research Program of China (No. 2015CB251600)the National Natural Science Foundation of China (Nos. 51474206 and 51774268)the Jiangsu Basic Research Program (No. BK20150051)
文摘To recover coal resources that have been damaged by traditional mining methods and ensure stability of the lower roadway in a small pit goaf,the goaf area must be filled and reinforced.In this research,the 1202 working face of the Hanzui mine is considered as an example for classifying the roof of the mining tunnel under the small kiln destruction zone,the effect of the goaf on the roadway is determined based on the radio tunnel penetration method,a mechanical model to determine the roof filling control mechanism was established,and the duct foaming system and roof filling process were designed.The results show that the scope and degree of influence of the goaf on the mining lane are large,but safe tunneling can be ensured through the use of a steel shed and advanced grouting techniques.When the roof conditions are not similar,materials with different filling heights and filling strengths can be used to control the roof filling of the roadway.By combining field experience and laboratory tests,it was determined that a high-foaming material with a water-cement ratio of 1:0.6,a suitable high-foaming additive,and a water volume ratio of 1:30 is cost-efficient for filling and meets the filling strength requirements.Finally,the reliability of the proposed technology was verified by field experiments,which provide a reference for filling operations in similar mines.
