A Large-scale Tertiary Salt Nappe Complex in the Leading Edge of the Kuqa Foreland Fold-Thrust Belt, the Tarim Basin, Northwest China

The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping faulting monoclines which are made up of Paleocene-Pliocene sediments. Geological analysis and cross-section restoration revealed that the salt nappes were mainly formed at the late Himalayan stage (c.a. 1.64 Ma BP) and have been active until the present day. Because of inhomogeneous thrusting, a great difference may exist in thrust displacement, thrust occurrence, superimposition of allochthonous and autochthonous sequences and the development of the salt-related structures, which indicates the segmentation along the salt nappes. Regional compression, gravitational gliding and spreading controlled the formation and evolution of the salt nappe complex in the Kuqa foreland fold belt.

An alternative interpretation for the map expression of "abrupt" changes in lateral stratigraphic level near transverse zones in fold-thrust belts

The map expression of ＂abrupt＂ changes in lateral stratigraphic level of a thrust fault has been traditionally interpreted to be a result of the presence of （1） a lateral （or oblique） thrust-ramp, or （2） a frontal ramp with displacement gradient, and/or （3） a combination of these geometries. These geometries have been used to interpret the structures near transverse zones in fold-thrust belts （FTB）. This contribution outlines an alternative explanation that can result in the same map pattern by lateral variations in stratigraphy along the strike of a low angle thrust fault. We describe the natural example of the Leamington transverse zone, which marks the southern margin of the Pennsylvanian-Permian Oquirrh basin with genetically related lateral stratigraphic variations in the North American Sevier FTB. Thus, the observed map pattern at this zone is closely related to lateral stratigraphic variations along the strike of a horizontal fault. Even though the present-day erosional level shows the map pattern that could be interpreted as a lateral ramp, the observed structures along the Leamington zone most likely share the effects of the presence of a lateral （or oblique） ramp, lateral stratigraphic variations along the fault trace, and the displacement gradient.

Numerical simulation of temporal and spatial evolution of fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau

Fold-thrust belts are common structural styles under the background of long-term regional tectonic shortening.The northern and northeastern margins of the Qinghai-Tibetan Plateau are located on the edge of the growth and expansion of the Qinghai-Tibetan Plateau.Since nearly 10 Ma,some significant and typical fold thrust belt have been formed.The spatial-temporal evolution of these fold-thrust belts and the characteristics of surface deformations are significant issues in geodynamics.In this paper,we use the elastoplastic finite element model with considering the contact nonlinearity to study the spatialtemporal evolution of the fold-thrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau,with particular attention to the details of the relationship between the depth and the shallow,the spatialtemporal order,and the characteristics of the surface deformation,etc.,in order to make a relatively complete mechanical interpretation of the spatial-temporal evolution of the foldthrust belts in the northern and northeastern margins of the Qinghai-Tibetan Plateau from the perspective of geodynamics.

Geological structures and potential petroleum exploration areas in the southwestern Sichuan fold-thrust belt, SW China

Based on the latest geological,seismic,drilling and outcrop data,we studied the geological structure,tectonic evolution history and deformation process of the southwestern Sichuan fold-thrust belt to find out the potential hydrocarbon exploration areas in deep layers.During key tectonic periods,the southwestern Sichuan fold-thrust belt developed some characteristic strata and structural deformation features,including the Pre-Sinian multi-row N-S strike rifts,step-shaped platform-margin structures of Sinian Dengying Formation,the western paleo-uplift in the early stage of Late Paleozoic,the Late Paleozoic–Middle Triassic carbonate platform,foreland slope and forebulge during Late Triassic to Cretaceous,and Cenozoic multi-strike rejuvenated fold-thrusting structures.The fold-thrust belt vertically shows a double-layer structural deformation controlled by the salt layer in the Middle Triassic Leikoupo Formation and the base detachment layer at present.The upper deformation layer develops the NE-SW strike thrusts propagating toward basin in long distance,while the deeper deformation layer had near north-south strike basement-involved folds,which deformed the detachment and thrusting structures formed earlier in the upper layer,with the deformation strength high in south part and weak in north part.The southern part of the fold-thrust belt is characterized by basement-involved fold-thrusts formed late,while the central-northern part is dominated by thin-skin thrusts in the shallow layer.The Wuzhongshan anticlinal belt near piedmont is characterized by over-thrust structure above the salt detachment,where the upper over-thrusting nappe consists of a complicated fold core and front limb of a fault-bend fold,while the deep layer has stable subtle in-situ structures.Favorable exploration strata and areas have been identified both in the upper and deeper deformation layers separated by regional salt detachment,wherein multiple anticlinal structures are targets for exploration.Other potential exploration strata and areas in southwestern Sichuan fold-thrust belt include the deep Sinian and Permian in the Wuzhongshan structure,pre-Sinian rifting sequences and related structures,platform-margin belt of Sinian Dengying Formation,and Indosinian paleo-uplift in the east of the Longquanshan structure.

TECTONIC SIGNIFICANCE OF THE WEST KUNLUN FOLD-THRUST-BELT AND THE TARIM SOUTHWEST DEPRESSION

The evolution of the Tarim southwest depression lying at the piedmont of the West Kunlun orogen differs completely from the evolution of the main part of Tarim basin after Later Palaeozoic because the former strongly subsides many times.. Subsidence is related closely to the West Kunlun fold thrust\|belt, thus the evolution of the Depression and the fold\|thrust\|belt reflects clearly the formation and evolution of the West Kunlun and even the Tibet.1 Evolution of the West Kunlun fold\|thrust\|belt\;Thrusting of the fold\|thrust\|belt can be classified into three stages:(1) Devonian thrusting:This is the oldest thrusting distinguished in the northern margin of the West Kunlun while the Silurian—Devonian thrusting was discriminated a few years ago by seismic data in the northern part of the East Kunlun. The Devonian thrusting is proved by the Upper Devonian dynamometamorphic rocks outcropping at the core of the anticline in the Sangzhu lying at the fold\|thrust\|belt. The rocks consist of slightly metamorphic clastic rock and have always been regarded as the Mid\|Proterozoic strata. But they are actually Upper Devonian strata according to the amount of perfect plant fossils that we found recently in the metamorphic rock, and they are overburdened `with an angular unconformity by another reliable Upper\|Devonian conglomerate in the core of the Aqike anticline. A possible explanation for this and its limited lined distribution parallel to the West Kunlun orogen is that they are subjected to metamorphism during the Later Devonian thrusting.

Deformation, Stratigraphy, Structures and Shortening of the Zagros Fold-Thrust Belt in Southwest Iran Analysis by Restoration

A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, satellite images and field reconnaissance. Besides validation and modification of the cross-section, restoration allows better understanding of the geology, structural style and stratigraphy of the Zagros basin. In the area of interest, the Hormuz basal decollement and the Gachsaran detachment play the most significant roles in the structural style and deformation of the Zagros belt. More complexity is associated with interval decollements such as Triassic evaporites, Albian shales and Eocene marls. A variety of lithotectonic units and detachment surfaces confound any estimation of shortening, which generally decreases with increasing depth. Deformation completely differs in the Abadan Plain, Dezful Embayment and Izeh Zone because of different sedimentation histories and tectonic evolution; gentle and young structures can be interpreted as pre-collisional structures of the Dezful Embayment before the Late Cretaceous. After the Late Cretaceous, the Mountain Front Fault is the main control of sedimentation and deformation in the Zagros Basin, and this completely characterizes fold style and geometry within the Dezful Embayment and the Izeh Zone.

冀北崇礼-赤城地区逆冲推覆构造特征及地热勘探前景

【研究目的】本文对崇礼—赤城地区隆起山地型带状热储进行了总结,对类似勘探区的地热调查工作具有一定的借鉴作用,可为后续地热资源勘探提供新的依据。【研究方法】通过野外地质调查与详细构造填图,结合可控源音频大地电磁测深(CSAMT)探测结果,分析了崇礼-赤城地区的逆冲推覆构造特征与地热勘探前景。【研究结果】崇礼-赤城地区发育了多种样式的逆冲断层,逆冲断层主要表现为从北向南的逆冲运动方向,在主底板逆冲断层的作用下,太古界、中元古界、白垩系自老向新依次推覆,形成了具有典型逆冲推覆构造分带分层现象。CSAMT剖面测量与解释的初步结果,验证了崇礼-赤城地区发育的逆冲推覆构造,逆冲岩席中发育多条叠瓦式逆冲断层,其断层面向北倾斜,倾角大于60°,向深部汇聚于主底板逆冲断层。【结论】逆冲推覆构造之上发现的中元古界长城系白云岩、白云质大理岩,扩展了该地区地热勘探前景。

塔里木盆地东北缘吐格尔明背斜和阳北断裂带构造分析

吐格尔明背斜和阳北断裂位于塔里木盆地北缘,南天山山前库车褶皱冲断带的东段,两者均为基底卷入型构造。阳北断裂是一个反转构造,其变形历史可以追溯到侏罗纪—白垩纪的正断层;新生代构造反转,发生了多期冲断变形加速期,分别发生于白垩纪末—古近纪初、古近纪末—新近纪初、中新世早期、上新世和第四纪。吐格尔明背斜构造带是阳北断裂中新世早期及以后的冲断作用派生出来的一个次级基底卷入型构造变形带。它由吐格尔明背斜及其南、北两条呈背冲关系的逆冲断层组成。背斜核部元古宇变质岩出露地表;中、新生界直接不整合于变质岩之上,缺失全部古生界,说明研究区可能属于一个长期存在的古生代古隆起。

Structural features and petroleum geology of the fold-thrust belt in the southern Tarim basin, China

The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and pe-troleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the pa-leo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.

准噶尔盆地南缘西部山前褶皱—冲断带构造分带特征及形成演化

准噶尔盆地南缘西部构造呈新的构造叠置特征和复杂的复合叠加构造样式,叠加构造在空间分布上具有明显的分带特征。根据野外地质调查和地震解释资料,采用平衡剖面恢复、楔型构造理论和构造地质学分析方法,研究复杂叠加构造变形差异及分带特征。结果表明:准噶尔盆地南缘西部发育受基底卷入与顺层滑脱联合与差异控制下的空间断褶体系,褶皱发育受断层控制,褶皱与断层相互叠加形成构造楔、双重构造、突发构造等复合构造样式,表现为多期活动特征。研究区按构造变形性质及变形差异可划分为山前逆冲推覆构造带、基底卷入型褶皱—冲断带、盖层滑脱型褶皱—冲断带3个构造带;其中,基底卷入型褶皱—冲断带与第一排断褶带重合,受控于基底卷入型断裂体系,发育基底卷入式大型构造楔、背形堆垛式双重构造与前倾双重构造,背斜轴线与断层线平面重合度高;盖层滑脱型褶皱—冲断带包括第二和第三排断褶带,受控于顺层滑脱型断裂体系,发育断展褶皱,背斜轴线与断层线平面重合度低,构造垂向上具有分层差异,构造变形程度自南向北表现为由强至弱。挤压应力作用的时期和强度、滑脱断层的向北滑脱、构造楔的楔入长度及推挤距离、滑脱层的厚度和上覆地层厚度,以及沉积时代、沉积速率和岩性差异等因素是引起研究区构造垂向分层、南北分带的原因。该结果对明确研究区构造发育及下一步油气地质勘探具有指导意义。

Tectonothermal Evolution of the Eastern Tibetan Plateau Foreland: Fission-Track Thermochronology of the Southern Dabashan Fold-Thrust Belt

Apatite fission-track dating and thermal-history modeling were carried out on samples from the Dabashan （大巴山）, a fold-thrust belt, northeast of the Sichuan （四川） Basin and east of the Tibetan Plateau. A first cooling event in the Late Cretaceous is followed by a prolonged period of ther- mal stability with exhumation rates of 〈0.025 mm/a, as determined from age vs. elevation relationships. The preservation of age vs. elevations relationships and the lack of distinct age changes across tectonic structures indicate that the Dabashan fold-thrust belt formed prior to the Late Cretaceous, consistent with the current view of Triassic-Early Cretaceous shortening. Relatively short mean track lengths （-12 μm） indicate that the samples remained in the partial annealing zone for a prolonged time. The knick points in the best-fitting temperature-time models suggest that the onset of late-stage accelerated cooling commenced at 〈11 Ma. Related exhumation rates are 0.3-0.2 mm/a assuming geothermal gra- dients of 20 and 30 ℃/km. We speculate that this late-stage event results from eastward growth of the Tibetan Plateau and overstepping of the Sichuan Basin, it is likely responsible for the youthful mor- phology of the Dabashan.

Influence of Mechanical Stratigraphy on the Deformation Evolution of Fold-Thrust Belts: Insights from the Analogue Modeling of Eastern Sichuan-Western Hunan and Hubei, South China

The eastern Sichuan-western Hunan and Hubei belt(ESWHHB) is an important fold-thrust belt in the Middle–Upper Yangtze region of China, and it is also an important area for petroleum and gas prospect in China. The influence of mechanical stratigraphy on the deformation evolution of the ESWHHB is a hot problem that has received widespread attention. However, due to the complexity of geological conditions, this issue has not been sufficiently addressed. Previews geological exploration studies show that the deformation evolution of the belt is closely related to the mechanical stratigraphy. Physical simulation has proven to be effective for studying the deformation evolution of fold-and-thrust belt. Based on the geological conditions of the ESWHHB, six groups of physical models were designed to analyze the influences of the ductile layer and overlap configuration on the structural deformation of the ESWHHB. The results show that the mechanical stratigraphy has significant control on the deformation evolution of the fold-thrust belt. The ESWHHB evolution is related to the lower viscosity of the ductile layer and the larger thickness of the ductile layer, while only gradual propagated fold-and-thrust belt can be resulted from the higher viscosity of the ductile layer and the smaller thickness of the ductile layer. Additionally, the overlap between the stratigraphy at various structural belts leads to significant differences in their mechanical properties, and it critically influences the structural patterns of the ESWHHB.

塔里木盆地西北缘乌什西次凹的地层系统和构造特征

乌什西次凹位于塔里木盆地西北缘,隶属于库车坳陷的乌什凹陷。它位于南天山主山脉(哈尔克山)和塔里木盆地柯坪—温宿凸起之间。区域构造格局上,这里是塔里木克拉通向西北自然延伸的部分。次凹北缘的阿合奇断裂是南天山造山带和塔里木克拉通的分界。乌什西次凹内发育与柯坪—温宿凸起相似的晚前寒武纪—古生代地层系统,包括寒武系、奥陶系和石炭系的烃源岩。新近系—第四系碎屑岩建造直接不整合于变形的古生代被动大陆边缘碎屑岩—碳酸盐岩沉积建造之上;剖面上,向南天山方向加厚,向塔里木克拉通方向减薄,呈现典型的前陆盆地剖面结构特征。这是一个晚新生代陆内前陆盆地,叠加在晚海西期—燕山期古隆起之上。这里的构造变形主要有3期,分别是中海西期、晚海西期—印支期和晚喜山期。变形以厚皮冲断构造及其相关褶皱为主,薄皮构造不发育。平面上,主构造线走向NE-SW。剖面上,以南天山向塔里木冲断为主。

A preliminary study on the fold-thrust structural style in Meishan, Changxing, Zhejiang Province

Many previous studies of Meishan, Changxing, have been made on paleontology,sedimentology and paleomagnetism, and less on the deformational characteristics.The authors’ recent work indicates that the region is characterized by fold-thrust structural style. Since the type section of the Upper Permian Changxing Formation （P2ch） was proposed to be established in Meishan, Changxing by many geologists, this note documents the field features of the fold-thrust structural style, as well as its influence on type section of the Upper Permian Changxing Formation.

Syn-tectonic sedimentation and its linkage to fold-thrusting in the region of Zhangjiakou, North Hebei, China

The timing of the "Yanshanian Movement" and the tectonic setting that controlled the Yanshan fold-and-thrust belt during Jurassic time in China are still matters of controversy. Sediments that filled the intramontane basins in the Yanshan belt perfectly record the history of "Yanshanian Movement" and the tectonic background of these basins. Recognizing syn-tectonic sedimentation, clarifying its relationship with structures, and accurately defining strata ages to build up a correct chronostratigraphic framework are the key points to further reveal the timing and kinematics of tectonic deformation in the Yanshan belt from the Jurassic to the Early Cretaceous. This paper applies both tectonic and sedimentary methods on the fold-and-thrust belt and intramontane basins in the Zhangjiakou area, which is located at the intersection between the western Yanshan and northern Taihangshan. Our work suggests that the pre-defined "Jurassic strata" should be re-dated and sub-divided into three strata units: a Late Triassic to Early Jurassic unit, a Middle Jurassic unit, and a Late Jurassic to early Early Cretaceous unit. Under the control of growth fold-and-thrust structures, five types of growth strata developed in different growth structures: fold-belt foredeep type,thrust-belt foredeep type, fault-propagation fold-thrust structure type, fault-bend fold-thrust structure type, and fault-bend foldthrust plus fault-propagation fold composite type. The reconstructed "source-to-sink" systems of Late Triassic to Early Jurassic,Middle Jurassic and Late Jurassic to early Early Cretaceous times, which are composed of a fold-and-thrust belt and flexure basins, imply that the "Yanshanian Movement" in our study area started in the Middle Jurassic. During Middle Jurassic to early Early Cretaceous times, there have been at least three stages of fold-thrust events that developed "Laramide-type" basementinvolved fold-thrust structures and small-scale intramontane broken "axial basins". The westward migration of a "pair" of basement-involved fold-thrust belt and flexure basins might have been controlled by flat subduction of the western Paleo-Pacific slab from the Jurassic to the Early Cretaceous.

塔里木盆地西北缘神木园-古木别孜冲断系的构造样式和形成演化过程

塔里木盆地西北缘的神木园-古木别孜冲断系,由神木园冲断带和古木别孜冲断带组成。前者位于乌什凹陷北缘,以厚皮构造为主,形成基底卷入型冲断楔。后者位于乌什凹陷南缘,为一盖层滑脱冲断构造,主滑脱面位于中新统吉迪克组膏泥岩。其中,古木别孜背斜是古木别孜断裂的断层传播褶皱。该冲断系是晚新生代南天山陆内造山带南麓的前陆褶皱冲断带的一部分,属于印度—亚洲碰撞的远程效应。该陆内造山带叠加在先存的增生-碰撞造山带之上。生长地层显示,神木园-古木别孜冲断系形成演化过程为前展式。其变形首先发生于冲断系根带的神木园冲断带,起始于上新世中期(3.5 Ma)。上新世末—第四纪初(1.8 Ma)向前推进至古木别孜冲断带,并在第四纪持续演化。

塔里木盆地北缘秋里塔格地区新构造运动及铀成矿作用阶段划分——来自不整合的约束

秋里塔格构造带为新构造运动的产物,构造变形复杂且强烈,然而对其构造变形时间和变形过程的认识仍存在争议,同时对第四纪以来的构造变形过程刻画较少,制约了铀成矿过程的研究。文章以秋里塔格构造带不整合为研究对象,在探讨不整合构造意义的基础上进行新构造运动过程研究;以上新统库车组下段为主要研究层位,探讨其赋矿砂体、层间氧化带等两大成矿要素特征及其与新构造运动的关系,进而进行铀成矿作用过程研究。研究表明,秋里塔格构造带不整合包括下更新统西域组下伏不整合、中更新统乌苏群下伏不整合、上更新统新疆群下伏不整合,分别显示为削截低角度不整合、超覆平行-高角度不整合、削截平行-高角度不整合。秋里塔格构造带新构造运动阶段可划分为3个阶段:平缓背斜发育阶段(N_(2)^(1)-Qp_(1))、箱式背斜发育阶段(Qp_(1)-Qp_(3))、构造突破阶段(Qp_(3)-今)。上新统库车组铀成矿过程可划分为3个阶段:同生沉积预富集阶段(N_(2)^(1)-N_(2)^(2)),时限为5.5~4.3 Ma;褶皱期层间氧化阶段(N_(2)^(2)-Qp_(2)),时限为4.3~0.12 Ma;剥蚀突破期改造-氧化阶段(Qp_(2)-今),时限为0.12 Ma~今。

褶皱冲断带物理模拟实验研究进展

褶皱冲断带油气资源丰富,统计表明全球探明油气储量约14%分布在褶皱冲断带。自从1815年地质学家第一次以模拟实验的方式验证了褶皱形成于岩层遭受水平挤压变形的二百多年来,针对褶皱冲断带的物理模拟实验研究无疑是最卓有成效的研究领域方向之一。本文从追溯早期模拟实验先驱,到近二十年来国内外相关研究进展综述,着重分析和评述物理模拟实验研究对于前陆褶皱冲断带构造理论发展的主要贡献。强调造山带临界楔体理论以及基底滑脱层强度、流体超压和变形岩层内聚强度等对构造变形过程的控制作用。主要介绍的实验性标志成果有:(1)褶皱冲断带构造变形的生长规律;(2)褶皱冲断带的构造变形机制;(3)褶皱冲断带中构造变形的主控因素。我们的目的是提供引人入胜的物理模拟实验研究成果,吸引更多现在和未来的研究人员理解和重视物理模拟工作,借助日益进步的实验装置和技术方法,促进盆地构造研究在学科发展道路上,一步步实现从定性走向定量、从二维走向三维、从几何学和运动学走向动力学的飞跃。

数值模拟在沉积盆地褶皱冲断构造变形研究中的应用与发展

数值模拟是一种利用电子计算机,通过数值计算和图像显示的方法,研究工程问题、物理问题乃至自然界各类问题的方法。随着高性能计算的不断发展,数值模拟方法在沉积盆地构造变形研究中的应用不断扩大,学术界和工业界将数值模拟方法广泛应用于盆地构造变形特征与变形机制的定量研究,取得了丰硕的成果。本文在系统分析前人数值模拟成果的基础上,阐述了有限元、有限差分、边界元和离散元四种常用数值模拟实验方法的特征和应用。同时,本文对近年来数值模拟方法在沉积盆地褶皱冲断构造变形中的研究进展进行了分类总结,重点介绍这一方法在构造特征与变形机制研究中取得的成果,为数值模拟方法在盆地构造变形领域应用的不断扩大和深入提供参考。最后,本文对数值模拟技术在目前应用中面临的问题和未来的发展方向提出了一些看法和建议。

Sentinel-1 In SAR observations and time-series analysis of co-and postseismic deformation mechanisms of the 2021 Mw 5.8 Bandar Ganaveh Earthquake,Southern Iran

In the past two decades,because of the significant increase in the availability of differential interferometry from synthetic aperture radar and GPS data,spaceborne geodesy has been widely employed to determine the co-seismic displacement field of earthquakes.On April 18,2021,a moderate earthquake(Mw 5.8)occurred east of Bandar Ganaveh,southern Iran,followed by intensive seismic activity and aftershocks of various magnitudes.We use two-pass D-InSAR and Small Baseline Inversion techniques via the LiCSBAS suite to study the coseismic displacement and monitor the four-month post-seismic deformation of the Bandar Ganaveh earthquake,as well as constrain the fault geometry of the co-seismic faulting mechanism during the seismic sequence.Analyses show that the co-and postseismic deformation are distributed in relatively shallow depths along with an NW-SE striking and NE dipping complex reverse/thrust fault branches of the Zagros Mountain Front Fault,complying with the main trend of the Zagros structures.The average cumulative displacements were obtained from-137.5 to+113.3 mm/yr in the SW and NE blocks of the Mountain Front Fault,respectively.The received maximum uplift amount is approximately consistent with the overall orogen-normal shortening component of the Arabian-Eurasian convergence in the Zagros region.No surface ruptures were associated with the seismic source;therefore,we propose a shallow blind thrust/reverse fault(depth~10 km)connected to the deeper basal decollement fault within a complex tectonic zone,emphasizing the thin-skinned tectonics.