Influence of Non-Uniform Temperature Distribution on Metallic Charge Length on Energy and Force Parameters During Groove-Rolling

Change in the temperature of band over its length, associated with the stock being non-uniformly heated in the furnace, influences the variations in the magnitudes of energy-force parameters. Using the FEM (Finite Element Model) programs for the computation of the values of the energy-force parameters can take into account the distribution of temperature over the band length. The mathematical model of the computer program Forge2008 was used to theoretically examine the energy-force parameters and plastic metal flow in the roughing stands of the continuous rolling mill. The results of experimental investigation of influence of the non-uniform temperature distribution were presented on the metallic charge length on the energy and force parameters and dimensions of the band during round bars rolling. Thermovision monitoring energy and force parameters monitoring were carried out in continuous rolling mill D350 in one of the Polish industrial plants. On the basis of obtained results, it could be stated that non-uniform distribution of temperatures along the charge length causes local increase of energy and force parameters values and also such distribution affects the local increase of the width of rolled band. The rolling process of charge with non-uniform distribution of temperature could lead to exceeding required dimensional tolerances of the final products.

Research on Mechanical Model of Material during Twin Roll Strip Casting Process

The prototype, basic parameters, composition and structure of computer simulation system of stretch reducing mill for tubes were introduced. The software has an obvious style of object-oriented programming, and the modules were integrated in the simulation system. The system can optimize pass design, and it can automatically classify pass series according to the product syllabus, formulate the rolling table and simulate the rolling parameters in stretch reducing process. The simulation results were compared with the detailed technical data (used as experimental data) provided by Baotou Iron and Steel Company, and the comparison gave a clear proof of the precision of the models.

Research on Computer Simulation System of Stretch Reducing Mill for Tube

The prototype,basic parameters,composition and structure of computer simulation system of stretch reducing mill for tubes were introduced.The software has an obvious style of object-oriented programming,and the modules were integrated in the simulation system.The system can optimize pass design,and it can automatically classify pass series according to the product syllabus,formulate the rolling table and simulate the rolling parameters in stretch reducing process.The simulation results were compared with the detailed technical data(used as experimental data) provided by Baotou Iron and Steel Company,and the comparison gave a clear proof of the precision of the models.

Energy of the Gravitational Field as an Equivalent of the Dark Energy of the Universe

Determination of the structural foundations and parameters of the Universe is an important urgent task since it enables us to understand and explain the structure and basic parameters of the material world. Herewith, it is necessary to be aware of modern problems of physics and possible ways to solve them. Among such problems, hypotheses concerning dark matter and the energy of the Universe occupy an important place. However, the determination of their on the basis of modern theories still leads to abstract equations that do not give concrete results;therefore, they have a level of hypotheses. A number of initial scientific propositions based on this abstract of mathematical dependencies have controversial meanings. Elimination of this disadvantage is the main goal of the work performed. Its main difference and scientific novelty are the justification of the energy parameters of the gravitational field of the Universe, the magnitude of which can replace its dark energy and dark mass. The solution to this problem is justified by strict physical dependencies, which are obtained on the basis of fundamental physical constants. It is an urgent and important scientific and applied problem, since it develops knowledge about the gravitational field and the material world in general. The performed work is based on the methods of deduction and induction in the research of the material world based on the application of the well-known reliable laws of physics and the general principles of the development of the theory of knowledge. Other research methods are still unknown, since the work performed is associated with new scientific discoveries, the search for which is difficult to formalize by technique methods. The results of the study consist of the analysis of wave, force and energy parameters of the relict gravitational field of the Universe. The calculated value of this energy is 1.58 × 1070 J. This energy is enough to cover the amount of dark energy and mass in the Universe, which casts doubt on their existence. Conclusions: This paper can supplement previously performed research on the dark mass and energy of the Universe, which requires further for their reconciliation.

Comparison between global phenomenological and microscopic optical potentials for proton as projectile below 100 MeV

For 112 target nuclei （52 elements） with proton as projectile, we calculate the reaction cross sections and elastic scattering angular distributions, as well as the X^2 values for 16 kinds of proton optical model potentials： two sets of phenomenological global optical potentials and the microscopic optical potentials proposed by Shen et al for 14 sets of Skyrme force parameters： GSI-6, SBJS, SKM, SGI-Ⅱ, SKa-b, SCOI-Ⅱ. We find that for obtaining the proton microscopic optical potential based on the nuclear matter approach with Skyrme force, SGI, SKa and SKb are the three sets of optimal Skyrme force parameters.