Numerical Simulation and Experimental Study of the Effects of Disposal Space on the Flow Field Around the Combined Three-Tube Reefs

The artificial reefs placed on the seabed with different layouts and disposal spaces will produce variational flow field. The intensity and scale of the combined three-tube artificial reefs with different layouts at five Reynolds numbers（Re） are numerically investigated by use of the RNG k-ε turbulent model and SIMPLEC algorithm. A stationary no-slip boundary condition is used on the models and the bottoms, and the free surface is treated as a ＂moving wall＂ with zero shear force and the same velocity with inflow. In order to validate the simulation results, a particle image velocimetry（PIV） experiment is carried out to analyze the flow field. The numerical simulation results are consistent with the data obtained from experiment. The corresponding errors are all below 20%. Based on the validation, the effects of disposal space on flow field are simulated and analyzed. According to the simulation, in a parallel combination, a better artificial reef effect is obtained when the disposal space between two parallel reefs is 1.0L（L is the length of the combined three-tube reef model）. In a vertical combination, when the disposal space between two vertical reefs is 1.0L to 2.0L, the artificial reef effect is better.

NUMERICAL SIMULATION ANALYSIS OF EXTERNAL FLOW FIELD OF WAGON-SHAPED CAR AT THE MOMENT OF PASSING

In the course of studying on aerodynamic change and its effect on steering stability and controllability of an automobile in passing, because of multi interaction streams, it is difficult to use traditional methods, such as wind tunnel test and road test. If the passing process of an automobile is divided into many time segments, so as to avoid the use of moving mesh which takes large calculation resource and CPU processing time in calculating, the segments are simulated with computational fluid dynamics （CFD） method, then the approximate computational results about external flow field will be obtained. On the basis of the idea, the change of external flow field of wagon-shaped car at the moment of passing is simulated through solving three-dimensional, steady and uncompressible N-S equations with finite volume method. Numerical simulation analysis of side force coefficient, stream lines, body surface pressure distribution of wagon-shaped car are presented and a preliminary discussion of aerodynamic characteristics of correlative situations is obtained. Finally, the C3 -x/l curve of side force coefficient（C3） of car following relative distance （x/l） between cars is obtained. By comparison, the curve is coincident well with the experimental data, which shows creditability of numerical simulation methods presented.

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier-Stokes Equations（RANSE） for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a bodyfixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models（TCMs）, the RNG k-ε model with wall functions and curvature correction and the Shear Stress Transport（SST） k-ω model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×10^6 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.

Numerical Study on the Hydrodynamic Characteristics of Biofouled Full-Scale Net Cage

The effect of biofouling on the hydrodynamic characteristics of the net cage is of particular interest as biofouled nettings can significantly reduce flow of well-oxygenated water reaching the stocked fish. For computational efficiency, the porous-media fluid model is proposed to simulate flow through the biofouled plane net and full-scale net cage. The porous coefficients of the porous-media fluid model can be determined from the quadratic-function relationship between the hydrodynamic forces on a plane net and the flow velocity using the least squares method. In this study, drag forces on and flow fields around five plane nets with different levels of biofouling are calculated by use of the proposed model. The numerical results are compared with the experimental data of Swift et al.（2006） and the effectiveness of the numerical model is presented. On that basis, flow through full-scale net cages with the same level of biofouling as the tested plane nets are modeled. The flow fields inside and around biofouled net cages are analyzed and the drag force acting on a net cage is estimated by a control volume analysis method. According to the numerical results, empirical formulas of reduction in flow velocity and load on a net cage are derived as function of drag coefficient of the corresponding biofouled netting.