Oxygen vacancy （Ov） has significant influence on physical and chemical properties of TiO2 systems, especially on surface catalytic processes. In this work, we investigate the effects of Ov on the adsorption of forma...Oxygen vacancy （Ov） has significant influence on physical and chemical properties of TiO2 systems, especially on surface catalytic processes. In this work, we investigate the effects of Ov on the adsorption of formaldehyde （HCHO） on TiO2（110） surfaces through first- principles calculations. With the existence of Ov, we find the spatial distribution of surface excess charge can change the relative stability of various adsorption configurations. In this case, the bidentate adsorption at five-coordinated Ti （Tisc） can be less stable than the monodentate adsorption. And HCHO adsorbed in Ov becomes the most stable structure. These results are in good agreement with experimental observations, which reconcile the long-standing deviation between the theoretical prediction and experimental results. This work brings insights into how the excess charge affects the molecule adsorption on metal oxide surface.展开更多
As the photo-dissociation product of methanol on the TIO2（110） surface, the diffusion and desorption processes of formaldehyde （HCHO） were investigated by using scanning tunneling microscope （STM） and density fu...As the photo-dissociation product of methanol on the TIO2（110） surface, the diffusion and desorption processes of formaldehyde （HCHO） were investigated by using scanning tunneling microscope （STM） and density functional theory （DFT）. The molecular-level images revealed the HCHO molecules could diffuse and desorb on the surface at 80 K under UV laser irra- diation. The diffusion was found to be mediated by hydrogen adatoms nearby, which were produced from photodissociation of methanol. Diffusion of HCHO was significantly decreased when there was only one H alatom near the HCHO molecule. Furthermore, single HCHO molecule adsorbed on the bare Ti02（l10） surface was quite stable, little photo-desorption was observed during laser irradiation. The mechanism of hydroxyl groups assisted diffusion of formaldehyde was also investigated using theoretical calculations.展开更多
The residual formaldehyde （HCHO） in fabric was degraded using photo-catalysis assisted by the compound catalyst of nano-TiO2 and nano-ZnO. The effects of several factors on the degradation, such as the composing of ...The residual formaldehyde （HCHO） in fabric was degraded using photo-catalysis assisted by the compound catalyst of nano-TiO2 and nano-ZnO. The effects of several factors on the degradation, such as the composing of catalyst, irradiation time, pH value and the H2CHO concentration of the immersed solution were investigated. Results showed that H2CHO of the immersed solution had degraded 93% after 5 h irradiation, and the degradation ratio of formaldehyde could be improved and the aging of the fabric can be avoided with the addition of ZnO nanoparticles and pH value of the immersed-fibric solution. The fabric with residual formaldehyde about 1 800 μg/g can be efficiently treated to satisfy the China National Standard （GB/2912.1-1998） with the photo-catalytic degradation.展开更多
Formaldehyde as an air pollutant to adverse health effects for humanity has been getting attention.The adsorption and dissociation of formaldehyde(HCHO)on the CoxCe1−xO_(2)−δ(110)surface were investigated by the dens...Formaldehyde as an air pollutant to adverse health effects for humanity has been getting attention.The adsorption and dissociation of formaldehyde(HCHO)on the CoxCe1−xO_(2)−δ(110)surface were investigated by the density functional theory(DFT)calculations.We calculated the oxygen vacancy formation energy as the function of its site around dopant Co in detail.The results showed that Co doping was accompanied by compensating oxygen hole spontaneous formation.The adsorption configurations and bindings of HCHO at different locations on the CoxCe1−xO_(2)(110)were presented.Four possible pathways of oxidation of formaldehyde on the catalytic surface were explored.The results suggested that formaldehyde dissociation at different adsorption sites on the doped CeO_(2)(110)—first forming dioxymethylene(CH2O_(2))intermediate,and then decomposing into H2O,H2,CO_(2),and CO molecules.It was found that the presence of cobalt and oxygen vacancy significantly prompted the surface activity of CeO_(2).展开更多
Urea-formaldehyde (UF) resin presents the most utilized adhesive system in the manufacture of plywood, particleboard and fiberboard. At the temperatures above 100°C in the presence of hardener, this resin undergo...Urea-formaldehyde (UF) resin presents the most utilized adhesive system in the manufacture of plywood, particleboard and fiberboard. At the temperatures above 100°C in the presence of hardener, this resin undergoes cross-linking reaction and the formation of three dimensional cross linked structures takes place and bonding of wood particles in a hot press [1]. UF powder resins show high reactivity and good performance in the production and by their low price;however they lack in water resistance of the hardened resin [2]. Urea-formaldehyde (UF) resins are the most important type of adhesive resins for the production of wood based panels but process-ability and curing behavior of urea formaldehyde resin depended on various factors related to resin properties, types of wood and their properties, amount & type of catalyst, types and amount of polymers addition and environmental conditions [3]. This factor decides the process-ability of UF resin based composite during manufacturing of plywood, particle board and fiberboard. In this review paper, various factors affecting gel time and process-ability of UF resin based wood composite are reviewed.展开更多
Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in hu...Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in humans. Hairdressing professionals frequently encounter formaldehyde, a component found in hair products that are known to have various toxic effects on the human body, including alterations in the sense of smell. Methods: A total of 32 hairdressing volunteers exposed to formaldehyde and 32 non-exposed volunteers matched for age, sex, education and smoking status underwent the University of Pennsylvania Smell Identification Test (UPSIT<sup>®</sup>). Results: The findings demonstrated a decrease in UPSIT<sup>®</sup> olfactory test scores and a higher degree of olfactory loss among hairdressers exposed to formaldehyde (mean UPSIT<sup>®</sup> scores: 30.6 vs 35.1, p Conclusion: Occupational exposure of hairdressers to formaldehyde is associated with diminished olfactory function. Education approach and promotion of personal protective equipment usage should be encouraged.展开更多
Many factors including depletion of the forest, environmental awareness, and generation of large quantities of agro-forest residues have increased the need to partially or wholly replace wood with agro-forest residue ...Many factors including depletion of the forest, environmental awareness, and generation of large quantities of agro-forest residues have increased the need to partially or wholly replace wood with agro-forest residue for particleboard production. This study assessed the decay resistance of particleboards produced from four agro-forest residues using cassava starch and urea formaldehyde as adhesives. <i><span>Musa paradisiaca pseudostem</span></i><span>, </span><i><span>Theobroma cacao </span></i><span>stem and pod, and sawdust of </span><i><span>Ceiba pentandra</span></i><span> were used for the study. Properties determined were: Weight loss, decay resistance rating and decay susceptibility index. These properties were evaluated after 12 weeks of exposure to </span><i><span>Coriolopsis polyzona</span></i><span> in accordance with ASTM D 2017</span><span>-</span><span>05. The results indicate that the weight loss for </span><i><span>Musa paradisiaca pseudostem</span></i><span> particleboard was least for both urea formaldehyde and cassava starch adhesives. Even though almost all the particleboards produced were classified as resistant or highly resistant to fungi attack, those produced with urea formaldehyde had better decay resistance properties than that of cassava starch. Furthermore, particleboards coated with synthetic polyvinyl lacquer had better resistance to fungi attack than the uncoated ones. At 5% level of significance, the agro-forest residue, adhesive and surface finish as well as their interactions had significant effects on decay resistance of the particleboards produced. It is recommended that further studies which aim at determining the effect of combination of the agro-forest residues and that of urea formaldehyde and cassava starch be conducted to determine their effects on decay properties of particleboards.</span>展开更多
文摘Oxygen vacancy （Ov） has significant influence on physical and chemical properties of TiO2 systems, especially on surface catalytic processes. In this work, we investigate the effects of Ov on the adsorption of formaldehyde （HCHO） on TiO2（110） surfaces through first- principles calculations. With the existence of Ov, we find the spatial distribution of surface excess charge can change the relative stability of various adsorption configurations. In this case, the bidentate adsorption at five-coordinated Ti （Tisc） can be less stable than the monodentate adsorption. And HCHO adsorbed in Ov becomes the most stable structure. These results are in good agreement with experimental observations, which reconcile the long-standing deviation between the theoretical prediction and experimental results. This work brings insights into how the excess charge affects the molecule adsorption on metal oxide surface.
文摘As the photo-dissociation product of methanol on the TIO2（110） surface, the diffusion and desorption processes of formaldehyde （HCHO） were investigated by using scanning tunneling microscope （STM） and density functional theory （DFT）. The molecular-level images revealed the HCHO molecules could diffuse and desorb on the surface at 80 K under UV laser irra- diation. The diffusion was found to be mediated by hydrogen adatoms nearby, which were produced from photodissociation of methanol. Diffusion of HCHO was significantly decreased when there was only one H alatom near the HCHO molecule. Furthermore, single HCHO molecule adsorbed on the bare Ti02（l10） surface was quite stable, little photo-desorption was observed during laser irradiation. The mechanism of hydroxyl groups assisted diffusion of formaldehyde was also investigated using theoretical calculations.
基金applied basis research from Sichuan Province,the Research of Photo Purification to Environment with Nano TiO_2(No.05YJ029-010).
文摘The residual formaldehyde （HCHO） in fabric was degraded using photo-catalysis assisted by the compound catalyst of nano-TiO2 and nano-ZnO. The effects of several factors on the degradation, such as the composing of catalyst, irradiation time, pH value and the H2CHO concentration of the immersed solution were investigated. Results showed that H2CHO of the immersed solution had degraded 93% after 5 h irradiation, and the degradation ratio of formaldehyde could be improved and the aging of the fabric can be avoided with the addition of ZnO nanoparticles and pH value of the immersed-fibric solution. The fabric with residual formaldehyde about 1 800 μg/g can be efficiently treated to satisfy the China National Standard （GB/2912.1-1998） with the photo-catalytic degradation.
基金supported by the National Key Research and Development Program of China (Grant Nos. 2018YFB0704300 and 2016YFB0700500)carried out at the National Supercomputer Center in Tianjin+1 种基金supported by Guangdong Provincial Key Laboratory of Meta-RF MicrowaveXi’an Fengdong Yixiang Technology Service Co.,Ltd
文摘Formaldehyde as an air pollutant to adverse health effects for humanity has been getting attention.The adsorption and dissociation of formaldehyde(HCHO)on the CoxCe1−xO_(2)−δ(110)surface were investigated by the density functional theory(DFT)calculations.We calculated the oxygen vacancy formation energy as the function of its site around dopant Co in detail.The results showed that Co doping was accompanied by compensating oxygen hole spontaneous formation.The adsorption configurations and bindings of HCHO at different locations on the CoxCe1−xO_(2)(110)were presented.Four possible pathways of oxidation of formaldehyde on the catalytic surface were explored.The results suggested that formaldehyde dissociation at different adsorption sites on the doped CeO_(2)(110)—first forming dioxymethylene(CH2O_(2))intermediate,and then decomposing into H2O,H2,CO_(2),and CO molecules.It was found that the presence of cobalt and oxygen vacancy significantly prompted the surface activity of CeO_(2).
文摘Urea-formaldehyde (UF) resin presents the most utilized adhesive system in the manufacture of plywood, particleboard and fiberboard. At the temperatures above 100°C in the presence of hardener, this resin undergoes cross-linking reaction and the formation of three dimensional cross linked structures takes place and bonding of wood particles in a hot press [1]. UF powder resins show high reactivity and good performance in the production and by their low price;however they lack in water resistance of the hardened resin [2]. Urea-formaldehyde (UF) resins are the most important type of adhesive resins for the production of wood based panels but process-ability and curing behavior of urea formaldehyde resin depended on various factors related to resin properties, types of wood and their properties, amount & type of catalyst, types and amount of polymers addition and environmental conditions [3]. This factor decides the process-ability of UF resin based composite during manufacturing of plywood, particle board and fiberboard. In this review paper, various factors affecting gel time and process-ability of UF resin based wood composite are reviewed.
文摘Objective: The aim of this study was to compare the olfactory function between hairdressers exposed to formaldehyde and unexposed controls, as exposure to toxic agents is a potential cause of olfactory disorders in humans. Hairdressing professionals frequently encounter formaldehyde, a component found in hair products that are known to have various toxic effects on the human body, including alterations in the sense of smell. Methods: A total of 32 hairdressing volunteers exposed to formaldehyde and 32 non-exposed volunteers matched for age, sex, education and smoking status underwent the University of Pennsylvania Smell Identification Test (UPSIT<sup>®</sup>). Results: The findings demonstrated a decrease in UPSIT<sup>®</sup> olfactory test scores and a higher degree of olfactory loss among hairdressers exposed to formaldehyde (mean UPSIT<sup>®</sup> scores: 30.6 vs 35.1, p Conclusion: Occupational exposure of hairdressers to formaldehyde is associated with diminished olfactory function. Education approach and promotion of personal protective equipment usage should be encouraged.
文摘Many factors including depletion of the forest, environmental awareness, and generation of large quantities of agro-forest residues have increased the need to partially or wholly replace wood with agro-forest residue for particleboard production. This study assessed the decay resistance of particleboards produced from four agro-forest residues using cassava starch and urea formaldehyde as adhesives. <i><span>Musa paradisiaca pseudostem</span></i><span>, </span><i><span>Theobroma cacao </span></i><span>stem and pod, and sawdust of </span><i><span>Ceiba pentandra</span></i><span> were used for the study. Properties determined were: Weight loss, decay resistance rating and decay susceptibility index. These properties were evaluated after 12 weeks of exposure to </span><i><span>Coriolopsis polyzona</span></i><span> in accordance with ASTM D 2017</span><span>-</span><span>05. The results indicate that the weight loss for </span><i><span>Musa paradisiaca pseudostem</span></i><span> particleboard was least for both urea formaldehyde and cassava starch adhesives. Even though almost all the particleboards produced were classified as resistant or highly resistant to fungi attack, those produced with urea formaldehyde had better decay resistance properties than that of cassava starch. Furthermore, particleboards coated with synthetic polyvinyl lacquer had better resistance to fungi attack than the uncoated ones. At 5% level of significance, the agro-forest residue, adhesive and surface finish as well as their interactions had significant effects on decay resistance of the particleboards produced. It is recommended that further studies which aim at determining the effect of combination of the agro-forest residues and that of urea formaldehyde and cassava starch be conducted to determine their effects on decay properties of particleboards.</span>
