A high performance fast-Fourier-transform (FFT) spectrum analyzer, which is developed for measure spin noise spectrums, is presented in this paper. The analyzer is implemented with a field-programmable-gate-arrays (FP...A high performance fast-Fourier-transform (FFT) spectrum analyzer, which is developed for measure spin noise spectrums, is presented in this paper. The analyzer is implemented with a field-programmable-gate-arrays (FPGA) chip for data and command management. An analog-to-digital-convertor chip is integrated for analog signal acquisition. In order to meet the various requirements of measuring different types of spin noise spectrums, multiple operating modes are designed and realized using the reprogrammable FPGA logic resources. The FFT function is fully managed by the programmable resource inside the FPGA chip. A 1 GSa/s sampling rate and a 100 percent data coverage ratio with non-dead-time are obtained. 30534 FFT spectrums can be acquired per second, and the spectrums can be on-board accumulated and averaged. Digital filters, multi-stage reconfigurable data reconstruction modules, and frequency down conversion modules are also implemented in the FPGA to provide flexible real-time data processing capacity, thus the noise floor and signals aliasing can be suppressed effectively. An efficiency comparison between the FPGA-based FFT spectrum analyzer and the software-based FFT is demonstrated, and the high performance FFT spectrum analyzer has a significant advantage in obtaining high resolution spin noise spectrums with enhanced efficiency.展开更多
The quaternion Fourier transform plays a vital role in the representation of two-dimensional signals. This paper characterizes spectrum of quaternion-valued signals on the quaternion Fourier transform domain by the pa...The quaternion Fourier transform plays a vital role in the representation of two-dimensional signals. This paper characterizes spectrum of quaternion-valued signals on the quaternion Fourier transform domain by the partial derivative.展开更多
The discrete Fourier transform（DFT） is used for fractional Brownian motion（FBM） surface synthesis in tribology（i.e., contact, sliding, and sealing, etc）. However, the relationship between fractal parameters（fra...The discrete Fourier transform（DFT） is used for fractional Brownian motion（FBM） surface synthesis in tribology（i.e., contact, sliding, and sealing, etc）. However, the relationship between fractal parameters（fractal dimension and scale factor） and traditional parameters, the influence of fractal parameters on surface appearance, have not been deeply discussed yet. These lead to some kind of difficulty to ensure the synthesized surfaces with ideal fractal characteristic, required traditional parameters and geometric appearance. A quantitative relationship between fractal parameters and the root mean square deviation of surface （Sq） is derived based on the energy conservation property between the space and frequency domain of DFT. Under the stability assumption, the power spectrum of a FBM surface is composed of concentric circles strictly, a series of FBM surfaces with prescribed Sq could be synthesized with given fractal dimension, scale factor, and sampling numbers, but the ten-point height（Sz）, the skewness（Ssk） and the kurtosis（Sku） are still in random, where the probability distributions of Sz and Ssk are approximately normal distribution. Furthermore, by iterative searching, a surface with desired Abbott-Firestone curve could be obtained among those surfaces. An intuitive explanation for the influence of fractal dimension and scale factor on surface appearance is obtained by discussing the effects on the ratio of energy between high and low frequency components. Based on the relationship between Sq and surface energy, a filtering method of surface with controllable Sq is proposed. The proposed research ensures the synthesized surfaces possess ideal FBM properties with prescribed Sq, offers a method for selecting desired Abbott-Firestone curve of synthesized fractal surfaces, and makes it possible to control the Sq of surfaces after filtering.展开更多
In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be a...In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be able to achieve acquisition in a very short time in spite of large Doppler frequencies. However, the traditional methods cannot solve it well. This work describes a new method that uses a differential decoding technique for Doppler mitigation and a batch process of FFT (fast Fourier transform) and IFFT (invert FFT) for the purpose of parallel code phase search by frequency domain correlation. After the code phase is estimated, another FFT process is carried out to search the Doppler frequency. Since both code phase and Doppler frequency domains are searched in parallel, this architecture can provide acquisition fifty times faster than conventional FFT methods. The performance in terms of the probability of detection and false alarm are also analyzed and simulated, showing that a signal-to-noise ratio (SNR) loss of 3 dB is introduced by the differential decoding. The proposed method is an efficient way to shorten the acquisition time with slightly hardware increasing.展开更多
A new method for the rejection of linear frequency modulation (LFM) interference in direct sequence spread spectrum (DSSS) system based on the fractional Fourier transform is proposed, and the configuration of the rec...A new method for the rejection of linear frequency modulation (LFM) interference in direct sequence spread spectrum (DSSS) system based on the fractional Fourier transform is proposed, and the configuration of the receiver with an interference exciser is also presented. Based on the property that the fractional Fourier transform of a signal is equivalent to rotating the signal in the time-frequency plane, the received signal is transform into a certain fractional Fourier domain, this transform will result in the least spectrum overlap between the signal and interference. Then, a narrowband filter is exploited to extract most of the interference energy. The performance analyses show that remarkable improvements in signal-to-noise ratio (SNR) and bit-error-ratio (BER) are obtained.展开更多
With the vigorous development of national infrastructure construction and public information construction,video surveillance systems have gradually penetrated various fields.The current key frame extraction technology...With the vigorous development of national infrastructure construction and public information construction,video surveillance systems have gradually penetrated various fields.The current key frame extraction technology has inadequate target details and inaccurate judgment of local actions.Addressing this problem,a key frame extraction method based on fractional Fourier transform is proposed.This method obtained the phase spectra information of different orders by performing fractional Fourier transform on the surveillance video frames.Next,the method designed an adaptive algorithm based on the golden section point to select the transformation order.Then,the phase spectrum information of two adjacent frames was used to characterize the changes in the global and local motion states of the target.The final step was to extract key frames based on this.Experimental results show that,compared with the previous methods,the key frames extracted by the method proposed in this paper can correctly capture the changes in the global and local motion states of the target.展开更多
This paper′s aim is to study the numerical method of Fourier eigen transform. The characteristics of eigen bases, the Hermite function are analyzed. And a valuable result of eigen coefficients a n by mean...This paper′s aim is to study the numerical method of Fourier eigen transform. The characteristics of eigen bases, the Hermite function are analyzed. And a valuable result of eigen coefficients a n by means of Gauss Hermite integral is gotten. Through talking about amplitude frequency peculiarities of basic signals, we prove that the method applied in this paper possesses higher precision and smaller computation quantity. Finally, we conducted quasi real time FET analysis in seismicity, tentatively probed into the feasibility of FET in seismic prediction, obtained something of practical value.展开更多
A novel spectral representation based on fractional Fourier transform （FrFT） is proposed and applied to birdcall analysis. The FrFT-based spectrogram of a signal is derived and compared with its FT-based counterpart...A novel spectral representation based on fractional Fourier transform （FrFT） is proposed and applied to birdcall analysis. The FrFT-based spectrogram of a signal is derived and compared with its FT-based counterpart, and the spectrum gathering method is used to show the energy distribution related to the pitch frequency. The fixed transform order and adaptive orders for FrFT are tested. The fixed order can be obtained empirically or calculated according to the known chirp rate. The adaptive optimal orders are determined by using ambiguity function. Experimental results with birdcalls show that the FrFT-based spectrogram with an optimal transform order has higher resolution than its STFT-based counterpart, and the better performance can be achieved if adaptive orders are used.展开更多
基金Project supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDC07020200)the National Key R&D Program of China(Grant Nos.2018YFA0306600 and 2016YFB0501603)+3 种基金the National Natural Science Foundation of China(Grant No.11927811)the Chinese Academy of Sciences(Grants Nos.GJJSTD20170001 and QYZDY-SSW-SLH004)Anhui Initiative in Quantum Information Technologies,China(Grant No.AHY050000)the Fundamental Research Funds for the Central Universities,China.
文摘A high performance fast-Fourier-transform (FFT) spectrum analyzer, which is developed for measure spin noise spectrums, is presented in this paper. The analyzer is implemented with a field-programmable-gate-arrays (FPGA) chip for data and command management. An analog-to-digital-convertor chip is integrated for analog signal acquisition. In order to meet the various requirements of measuring different types of spin noise spectrums, multiple operating modes are designed and realized using the reprogrammable FPGA logic resources. The FFT function is fully managed by the programmable resource inside the FPGA chip. A 1 GSa/s sampling rate and a 100 percent data coverage ratio with non-dead-time are obtained. 30534 FFT spectrums can be acquired per second, and the spectrums can be on-board accumulated and averaged. Digital filters, multi-stage reconfigurable data reconstruction modules, and frequency down conversion modules are also implemented in the FPGA to provide flexible real-time data processing capacity, thus the noise floor and signals aliasing can be suppressed effectively. An efficiency comparison between the FPGA-based FFT spectrum analyzer and the software-based FFT is demonstrated, and the high performance FFT spectrum analyzer has a significant advantage in obtaining high resolution spin noise spectrums with enhanced efficiency.
文摘The quaternion Fourier transform plays a vital role in the representation of two-dimensional signals. This paper characterizes spectrum of quaternion-valued signals on the quaternion Fourier transform domain by the partial derivative.
基金supported by National Natural Science Foundation of China(Grant Nos.51175085,51205062)Fujian Provincial Natural Science Foundation of China(Grant Nos.2011J01299,2012J01206)Development Foundation for Science and Technology of Fuzhou University,China(Grant No.2011-XY-10)
文摘The discrete Fourier transform（DFT） is used for fractional Brownian motion（FBM） surface synthesis in tribology（i.e., contact, sliding, and sealing, etc）. However, the relationship between fractal parameters（fractal dimension and scale factor） and traditional parameters, the influence of fractal parameters on surface appearance, have not been deeply discussed yet. These lead to some kind of difficulty to ensure the synthesized surfaces with ideal fractal characteristic, required traditional parameters and geometric appearance. A quantitative relationship between fractal parameters and the root mean square deviation of surface （Sq） is derived based on the energy conservation property between the space and frequency domain of DFT. Under the stability assumption, the power spectrum of a FBM surface is composed of concentric circles strictly, a series of FBM surfaces with prescribed Sq could be synthesized with given fractal dimension, scale factor, and sampling numbers, but the ten-point height（Sz）, the skewness（Ssk） and the kurtosis（Sku） are still in random, where the probability distributions of Sz and Ssk are approximately normal distribution. Furthermore, by iterative searching, a surface with desired Abbott-Firestone curve could be obtained among those surfaces. An intuitive explanation for the influence of fractal dimension and scale factor on surface appearance is obtained by discussing the effects on the ratio of energy between high and low frequency components. Based on the relationship between Sq and surface energy, a filtering method of surface with controllable Sq is proposed. The proposed research ensures the synthesized surfaces possess ideal FBM properties with prescribed Sq, offers a method for selecting desired Abbott-Firestone curve of synthesized fractal surfaces, and makes it possible to control the Sq of surfaces after filtering.
基金Project(60904090) supported by the National Natural Science Foundation of China
文摘In low earth orbit (LEO) satellite or missile communication scenarios, signals may experience extremely large Doppler shifts and have short visual time. Thus, direct sequence spread spectrum (DSSS) systems should be able to achieve acquisition in a very short time in spite of large Doppler frequencies. However, the traditional methods cannot solve it well. This work describes a new method that uses a differential decoding technique for Doppler mitigation and a batch process of FFT (fast Fourier transform) and IFFT (invert FFT) for the purpose of parallel code phase search by frequency domain correlation. After the code phase is estimated, another FFT process is carried out to search the Doppler frequency. Since both code phase and Doppler frequency domains are searched in parallel, this architecture can provide acquisition fifty times faster than conventional FFT methods. The performance in terms of the probability of detection and false alarm are also analyzed and simulated, showing that a signal-to-noise ratio (SNR) loss of 3 dB is introduced by the differential decoding. The proposed method is an efficient way to shorten the acquisition time with slightly hardware increasing.
文摘A new method for the rejection of linear frequency modulation (LFM) interference in direct sequence spread spectrum (DSSS) system based on the fractional Fourier transform is proposed, and the configuration of the receiver with an interference exciser is also presented. Based on the property that the fractional Fourier transform of a signal is equivalent to rotating the signal in the time-frequency plane, the received signal is transform into a certain fractional Fourier domain, this transform will result in the least spectrum overlap between the signal and interference. Then, a narrowband filter is exploited to extract most of the interference energy. The performance analyses show that remarkable improvements in signal-to-noise ratio (SNR) and bit-error-ratio (BER) are obtained.
基金supported by the National Natural Science Foundation of China(Nos.61702347,62027801 and 61972267)Natural Science Fund of Hebei Province(No.F2017210161),and Hebei Province Graduate Student Innovation Ability Training Funding Project.
文摘With the vigorous development of national infrastructure construction and public information construction,video surveillance systems have gradually penetrated various fields.The current key frame extraction technology has inadequate target details and inaccurate judgment of local actions.Addressing this problem,a key frame extraction method based on fractional Fourier transform is proposed.This method obtained the phase spectra information of different orders by performing fractional Fourier transform on the surveillance video frames.Next,the method designed an adaptive algorithm based on the golden section point to select the transformation order.Then,the phase spectrum information of two adjacent frames was used to characterize the changes in the global and local motion states of the target.The final step was to extract key frames based on this.Experimental results show that,compared with the previous methods,the key frames extracted by the method proposed in this paper can correctly capture the changes in the global and local motion states of the target.
文摘This paper′s aim is to study the numerical method of Fourier eigen transform. The characteristics of eigen bases, the Hermite function are analyzed. And a valuable result of eigen coefficients a n by means of Gauss Hermite integral is gotten. Through talking about amplitude frequency peculiarities of basic signals, we prove that the method applied in this paper possesses higher precision and smaller computation quantity. Finally, we conducted quasi real time FET analysis in seismicity, tentatively probed into the feasibility of FET in seismic prediction, obtained something of practical value.
基金Sponsored by the National Natural Science Foundation of China(60605015)
文摘A novel spectral representation based on fractional Fourier transform （FrFT） is proposed and applied to birdcall analysis. The FrFT-based spectrogram of a signal is derived and compared with its FT-based counterpart, and the spectrum gathering method is used to show the energy distribution related to the pitch frequency. The fixed transform order and adaptive orders for FrFT are tested. The fixed order can be obtained empirically or calculated according to the known chirp rate. The adaptive optimal orders are determined by using ambiguity function. Experimental results with birdcalls show that the FrFT-based spectrogram with an optimal transform order has higher resolution than its STFT-based counterpart, and the better performance can be achieved if adaptive orders are used.
