基于Fourier合成技术的水波动画

水波动画是计算机动画中经常要模拟的一种自然现象。文章基于Fourier合成技术对雨滴下落产生的水波这一特殊物理现象进行了计算机动画合成。文章在物理建模的基础上,详细论述了算法的实现过程,从实验结果来看,该算法获得了理想的效果。

Dealumination kinetics of composite ZSM-5/mordenite zeolite during steam treatment: An in-situ DRIFTS study

To get a better understanding of structural deactivation of ZSM-5/MOR during the catalytic cracking of n-heptane in the steam atmosphere, a comprehensive mechanism of hydrothermal dealumination was proposed through in-situ diffuse reflectance Fourier transform infrared spectroscopy(DRIFTS) in this work. The mechanism can be divided into two steps: firstly, the hydrolysis of four Al\\O bonds, and secondly, the self-healing of Si\\OH bonds accompanied with partial condensation of the extra-framework Al species. Accordingly, the kinetics of dealumination process has also been fully discussed. In the IR spectra, the range of 3450–3850 cm^(-1) could be deconvolved to distinguish the hydroxyl groups on the different position and calculate the consumption of each hydroxyl group during the reaction. Based on results from the in-situ DRIFTS, the kinetics of dealumination was hence developed and also in well agreement with the kinetics of deactivation of ZSM/MOR catalysts during the reaction in the presence of little coke deposits.

Study on Synthesis of Mesoporous M-MCM-48(M=Zr,Mg) and Its Activity for Isomerization of n-Heptane

The mesoporous materials supported zirconium （Zr-MCM-48） and magnesium （Mg-MCM-48） with three-dimen- sional pore structures and different Zr or Mg contents were prepared via the hydrothermal method, respectively. The prepared samples were characterized by means of X-ray diffraction （XRD）, scanning electron microscope （SEM）, transmission electron microscope （TEM）, Fourier transform infrared spectroscopy （FT-IR）, NH3 temperature programmed desorption （NH3-TPD） and N2 adsorption-desorption. The XRD, TEM and N2 adsorption-desorption results suggested that M-MCM-48 （where M = Zr, Mg） samples still maintained typical cubic mesoporous framework of MCM-48, with slight decrease of specific surface areas and mesopore orders. The isomerization of n-heptane was carried out as a probe reaction at various factors including the zirconium or magnesium content, reaction time, reaction temperature and weight hourly space veloc- ity （WHSV）. Preliminary results demonstrated that the Mg-MCM-48 catalyst exhibited a higher catalytic activity with a maximum heptane conversion of 91.5% and a corresponding isomerization selectivity of 72.3% as compared to that of Zr- MCM-48. However, for catalytic stability of Mg-MCM-48 for n-heptane isomerization was poorer than Zr-MCM-48, because the Mg-MCM-48 catalyst could maintain a relatively high catalytic activity for only 130 rain, while the Zr-MCM-48 catalyst could maintain a relatively high catalytic activity for more than 190 min without any obvious decrease in performance.

Synthesis, Growth, and Characterization of a New Thiourea and Bismuth Chloride Complex with Excellent Nonlinear Optical Properties

Crystals of a new organometallic nonlinear optical （NLO） compound, di-ta-chloro-bis[chlorotri（thiourea）bismuth（Ⅲ）]- pentachloro（thiourea）bismuth-ate（Ⅲ） （DCBPB）, have been successfully grown from formic acid aqueous solutions of thio-urea and bismuth chloride by a slow evaporation technique. The crystal structure and atomic composition of DCBPB have been confirmed by single crystal X-ray diffraction （SCXRD）, Fourier transform infrared spectra, and elemental analysis. The SCXRD results proved that DCBPB crystallizes in triclinic space group P1 with unit cell dimensions of a = 7.0606（2） A, b = 8.8106（4） A, c = 16.3247（8） A, a = 99.242（4）°, fl = 95.309（3）°, ）/= 105.856（3）°, and Z= 2. DCBPB crystal exhibits excel-lent transmittance from 500 to 2500 nm and green fluorescence with maximum emission at 508 nm. The thermogravimetric-differential scanning calorimetry （TG-DSC） analysis indicates that a solid-phase reaction took place at 170.1 ℃, whereas the decomposition temperature of the crystal material was 189℃. The NLO property obtained by the Kurtz powder test showed that the second harmonic generation efficiency of DCBPB crystal is two-seventh of KDP crystal.

Synthesis,characterization and application of PVA/ionic liquid mixed matrix membranes for pervaporation dehydration of isopropanol

In this study,polyvinyl alcohol(PVA)–ionic liquid(IL) membranes were prepared for the separation of isopropyl alcohol(IPA)–water azeotropic mixtures by pervaporation.PVA-IL composite membranes were prepared by simple solvent evaporation method using four ILs,viz.,1-n-butyl-3-methylimidazolium chloride(BMIMCl),1-hexyl-3-methylimidazolium chloride(HMIMCl),1-hexyl-3-methylimidazolium tetra fluoroborate(HMIMBF4) and 1-octyl-3-methylimidazolium chloride(OMIMCl).Three ILs were used to study the effect of alkyl chain on the pervaporation performance.The study had focused on the effect feed water concentration from 10%–40%and effect of feed temperature from 50–80°C.Physiochemical properties of all the membranes were studied using Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM) and contact angle measurement.The Arrhenius activation energies for permeation were estimated to be in the range 4–12 kJ·mol-1 from the temperature dependent permeation values.

Preparation of PVC/PVP composite polymer membranes via phase inversion process for water treatment purposes

In this work, new composite membranes were successfully prepared via phase inversion technique using polyvinyl chloride(PVC) and polyvinylpyrrolidone(PVP) as polymers and tetrahydrofuran(THF) and N-methyl-2-pyrrolidone(NMP) as solvents. The prepared membranes have been characterized by scanning electron microscope(SEM), and fourier transforms infrared spectroscopy(FTIR). The scanning electron microscope results prove that the prepared membranes are smooth and their pores are distributed throughout the whole surface and bulk body of the membrane without any visible cracks. The stress–strain mechanical test showed an excellent mechanical behavior enhanced by the presence of PVP in the prepared membranes. The membranes performance results showed that the salt rejection reached 98% with a high flux. This, in turn, makes the prepared membranes can be applied for sea and brackish water treatment through membrane distillation technology.