MIPPO technique and LCP internal fixation for open tibial shaft fractures

Objective To explore the efficacy of minimally invasive percutaneous plate osteosynthesis (MIPPO) technique and locking compression plate (LCP) for open tibial shaft fractures.Methods From March 2005 to May 2009,16 cases with open tibial

Association between anterior internal fixation systems and post-operative lateral angulation in thoracolumbar fractures

Objective To explore the effects of the anterior internal fixation systems on the post-operative lateral angulation in treatment of thoracolumbar fractures.Methods A retrospective study was done to analyze the 172 patients who had

Comparative Dimensional and Microscopic Analysis of the Strength and Hardness of Internal Fixation Plates

The fixation stability achieved with the use of plates and screws in oral and maxillofacial surgery is a decisive factor in treatment success. The mechanical and structural properties of the internal fixation materials have direct influence on the dimensional stability and resistance of a fixation system, thus influencing treatment outcomes. This study proposed to analyze the dimensional and resistance patterns of titanium plates used for obtaining stable fixation in orthognathic surgery and craniofacial trauma. For this study, 30 conventional 2.0 mm straight four hole plates with bridge from three brands commercialized in Brazil, were subjected to macroscopic, microscopic, strength and hardness analysis. The dimensional measurements were performed using a digital caliper. Energy-dispersive X-ray spectroscopy analysis was performed by scanning electron microscopy to analyze the chemical composition of the samples. The mechanical resistance tests were performed with a universal testing machine. The samples were then submitted to Vickers hardness analysis, complying with the standards of ASTM E92. The data collected from the dimensional study was submitted to statistical analysis of the coefficient of variation, while the values obtained during the mechanical tests were analyzed by variance (ANOVA) and Tukey’s test (p < 0.05). The sample groups presented different performances in resistance, hardness, size and surface, even though they were reported to be chemically similar compounds that allowed us to conclude the plates from Group 2 were more resistant than groups 1 and 3.

Clinical effect of distal radius fracture treated with open reduction and internal plate fixation

Background For some specific comminuted unstable intra-articular fracture,the plaster cast can not maintain the alignment of the articular surface effectively.The aim of this study was to evaluate the clinical effects of distal radius fracture treated with open reduction and internal plate fixation retrospectively.Methods From January 2002 to March 2010,539 cases of distal radius fracture were treated with open reduction and internal fixation,including 184 males and 355 females aging 21-72 years （mean 57 years）.Fractures were caused by falling to the ground in 459 cases,by traffic accident in 62 cases and by athletic injuries in 18 cases.Of 539 cases,there were 523 cases of closed fracture and 16 cases of open fracture.According to Arbeitsgemeinschaft fur Osteosynthesefragen （AO） standards of classification,there were 14 cases of A2 type,22 of A3 type,18 of B1 type,24 of B2 type,62 of B3 type,91 of C1 type,162 of C2 type and 146 of C3 type.The time from injury to operation was 1-16 days （mean 5 days）.All patitents received open reduction and internal plate screw fixation.Forty-seven patients with bone defect were given 6-15 g autologous ilium and 75 cases were given 5 ml calcium sulphate artificial aggregate after reduction.Results All incisions healed by first intention after operation.Patients were followed up for 15 to 32 months postoperatively （mean 22 months）.The fractures healed within 10-18 weeks after operation （mean 12 weeks）.During the last follow-up,the mean palmar tilt was （7.0±0.9）° and the mean ulnar variance was （21.0±4.2）°,showing significant difference when compared with preoperation （（-5.0±1.2）° and （8.0±3.8）°）.The radial heights were not abbreviated.According to Gartland and Werley assessment system,the results were excellent in 314 cases,good in 163 cases,fair in 46 cases,and poor in 16 cases 12 weeks after operation,the excellent and good rate was 88.5%.Conclusions The clinical effect of distal radius fracture treated with open reduction and internal plate fixation was relatively satisfactory.Meticulous operation procedure and individual rehabilitation strategy contribute to the wrist joint functional recovery.

Stress fracture of the clavicle secondary to coracoclavicular fixation using a multistrand titanium cable： a case report

Acromioclavicular （AC） dislocations are common shoulder injuries. The classic mechanism of injury to AC joint is direct trauma caused by falls or blows to acromion with the arm abducted. According to Tossy et al,1 the degrees of AC dislocations are classified into types Ⅰ, Ⅱ, and Ⅲ. Tossy Ⅰ and Ⅱ are incomplete dislocations. Tossy Ⅲ is a complete dislocation with complete disruption of the AC and coracoclavicular （CC）ligaments, accompanied by marked upward migration of the lateral end of the clavicle. Typically, surgical treatment is needed for patients with Tossy Ⅲ.

Influence of Medial Support Screws on the Maintenance of Fracture Reduction after Locked Plating of Proximal Humerus Fractures

Background： Technical aspects of the correct placement of medial support locking screws in the locking plate for proximal humerus fractures remain incompletely understood. This study was to evaluate the clinical relationship between the number of medial support screws and the maintenance of fracture reduction after locked plating of proximal humerus fractures. Methods： We retrospectively evaluated 181 patients who had been surgically treated for proximal humeral fractures （PHFs） with a locking plate between September 2007 and June 2013. All cases were then subdivided into one of four groups as follows： 75 patients in the medial cortical support （MCS） group, 26 patients in the medial multiscrew support （MMSS） group, 29 patients in the medial single screw support （MSSS） group, and 51 patients in the 11o medial support （NMS） group. Clinical and radiographic evaluations included the Constant-Murley score （CM）, visual analogue scale （VAS）, complications, and revision surgeries. The neck-shaft angle （NSA） was measured in a true anteroposterior radiograph immediately postoperation and at final follow-up. One-way analysis of variance or KruskaI-Wallis test was used for statistical analysis of measurement data, and Chi-square test or Fisher＇s exact test was used for categorical data. Results： The mean postoperative NSAs were 133.46°± 6.01°, 132.39° ± 7.77°. 135.17° ± 10.15°, and 132.41° ± 7.16° in the MCS, MMSS, MSSS, and NMS groups, respectively, and no significant differences were found （F = 1.02, P= 0.387）. In the final follow-up, the NSAs were 132.79° ±6.02°, 130.19° ± 9.25°, 131.28° ± 12.85°, and 127.35° ± 8.50° in the MCS, MMSS, MSSS, and NMS groups, respectively （F = 4.40, P = 0.008）. There were marked differences in the NSA at the final follow-up between the MCS and NMS groups （P = 0.004）. The median （interquartile range [IQR]） NSA losses were 0.0° （0.0-1.0）°, 1.3° （0.0-3.1）°, 1.5° （ 1.0-5.2）°, and 4.0° （ 1.2 -7.1 ）° in the MCS, MMSS, MSSS, and NMS groups, respectively （H = 60.66, P 〈 0.001 ）. There were marked differences in NSA loss between the MCS and the other three groups （MCS vs. MMSS, Z = 3.16, P = 0.002; MCS vs. MSSS, Z = 4.78, P 〈 0.001; and MCS vs. NMS, Z = 7.34, P 〈 0.001）. There was also significantly less NSA loss observed in the MMSS group compared to the NMS group （Z = -3.16, P = 0.002）. However, there were no significant differences between the MMSS and MSSS groups （Z = -1.65, P = 0.225） or the MSSS and NMS groups （Z =- 1.21, P = 0.099）. The average CM scores were 81.35 ± 9.79, 78.04± 8.97, 72.76 ± 10.98, and 67.33 ± 12.31 points in the MCS, MMSS, MSSS, and NMS groups, respectively （F = 18.68, P 〈 0.001）. The rates of excellent and good CM scores were 86.67%, 80.77%, 65.52%, and 43.14% in the MCS, MMSS, MSSS, and NMS groups, respectively （ X^2 = 29.25, P 〈 0.001 ）. The median （IQR） VAS scores were 1 （0-2）, l （0 2）,2 （ 1-3）, and 3 （1-5） points in the MCS, MMSS, MSSS, and NMS groups, respectively （H = 27.80, P 〈 0.001）. Functional recovery was markedly better and VAS values were lower in the MCS and MMSS groups （for CM scores： MCS vs. MSSS, P 〈 0.001 ; MCS vs. N MS. P 〈 0.001; MMSS vs. MSSS, P= 0.031 and MMSS vs. NMS, P 〈 0.001 and for VAS values： MCS vs. MSSS, Z=3.31, P = 0.001： MCS vs. NMS, Z = 4.64, P 〈 0.001; MMSS vs. MSSS, Z = -2.09, P = 0.037： and MMSS vs. NMS, Z=-3.16, P = 0.003）.Conclusions： Medial support screws might help enhance mechanical stability and maintain fracture reduction when used to treat PHFs with medial metaphyseal comminution or malreduction.

Cure of an old pediatric femoral neck fracture: a case report

The femoral neck in children is much stronger than that in adults and can only be fractured by a severe force. It is therefore rare and often associated with severe injury once it takes place. Besides, as the blood supply to the femoral head is precarious, the fracture can lead to a high incidence of post-traumatic avascular necrosis of the femoral head.^(1,2) So, much attention should be paid to the treatment of femoral fractures in children. The authors have successfully cured an old femoral neck fracture of a girl by open reduction and internal fixation with 3 Kirschner wires supplemented by an external fixator across the hip joint and cancellous allograft at the fracture site. The patient has gotten a satisfactory functional recovery of the hip.

Anatomic measurement of wrist scaphoid and its clini-cal significance

Objective: To provide anatomical basis for the internal fixation of scaphoid fractures.Methods: The shape and vascular lake of 48 dry scaphoids and 36 wet scaphoids were observed.Results: The data of dry bone group and wet bone group were as follows: the height of scaphoid tubercle were (11.28±0.94) mm and (10.35±1.54) mm; the thickness of scapoid waist were (12.02±1.90) mm and (11.21±1.20) mm; the width of scapoid waist were (10.59±1.11) mm and (11.34±1.47) mm; the minimal thickness of the body of scapoid were (6.51±1.22) mm and (8.54±1.07) mm; the axis length of scapoid were (25.68±2.21) mm and (26.50±2.56) mm; the width of epicondyle of scaphoid of distal portion, waist and proximal portion were (6.50±1.06) mm, (5.14±1.01) nun, (4.42±1.16)mm and(6.64±1.18) mm, (6.01±0.75)mm and(5.71±0.78) mm, respestively. The main blood vessels came from the dorsal and the radial of wrist and passed through the whole scaphoid along the crest of scaphoid.Conclusion: The internal fixation of scaphoid can be designed according to the anatomical data without damag-ing the articular surface and blood supply.