Using shape-memory alloy staples to treat comminuted manubrium sterni fractures: A case report

BACKGROUND Comminuted manubrium sterni fractures are rare,and internal fixation methods are limited.This report explored a practical and feasible method of internal fixation for comminuted manubrium sterni fractures.CASE SUMMARY A 17-year-old female was injured in a car accident for which she underwent debridement and suturing of her head and anterior chest wounds in another hospital.Eight days later,the patient was transferred to our hospital for surgical treatment.The manubrium sterni was found intraoperatively to be split into three irregular fragments with obvious overlap and separation displacement.Meanwhile,a manubriosternal joint dislocation and left first rib cartilage fracture were observed.The retraction force of the shape-memory alloy staples was used to pull the fracture fragments together.Two more titanium locking plates were then used to fix the manubrium sterni and corpus sterni longitudinally,and the left first rib cartilage fracture was repositioned and fixed with a titanium locking plate.A postoperative computed tomography scan showed reduced and rigid fixation of the comminuted manubrium sterni fractures.The patient recovered well with no significant complaints of discomfort.The patient was discharged 10 days postoperatively after the stitches had been removed.CONCLUSION Shape-memory alloy staples had the advantage of being safe and effective during the repositioning and internal fixation of comminuted manubrium sterni fractures.Therefore,they provided a new surgical option for comminuted manubrium sterni fractures.

Hybrid External Fixation for Open Severe Comminuted Fractures of the Distal Femur

Background: The treatment of distal femoral open comminuted fractures is a major problem for orthopedic surgeon. The basic and important aim in treatment of these fractures is to assemble the condylar fragments and then fix the condyles to the femoral shaft by minimum handling of the bone and soft tissues. Objectives: To evaluate the treatment of distal femoral open comminuted fractures (type C2 and C3) with hybrid external fixator. Methods: Thirty-four patients with distal femur open comminuted fracture (type C2 and C3) were treated by hybrid external fixator between January 2005 and December 2008. All of the fractures were opened with extension to joint surface. 30 patients were male and 4 were female. Their average age was 30.5 years (17 to 72 years). Average follow up period was 36 months. 12 patients had isolated fracture and 22 patients had multiple fractures. The bony and functional results were evaluated by the association for the study and application of the method of Ilizarov (ASAMI) protocol and knee society score. Results: 29 out of 34 fractures (85%) had union without bone grafts. Average time of union was 6.1 months (4 - 19 ms). The average knee range of motion was 87.5 degrees (30 - 115 degrees). The bony results were excellent in 24 patients (70.5%), good in 6 (17.7%), fair in 2 (5.9%), and poor in 2 (5.9%), and the functional results were excellent in 10 (29.4%) patients, good in 14 (41.2%), fair in 6 (17.6%), and poor in 4 (11.8%), and the functional results were excellent in 10 (29.4%) patients, good in 14 (41.2%), fair in 6 (17.6%), and poor in 4 (11.8%) according to ASAMI protocol. According to the knee society score the functional results were excellent in 9 (26.44%) patients, good in 13 (38.26%), fair in 7 (20.6%), and poor in 5 (14.7%). Conclusion: Hybrid external fixator is an effective method for treatment of distal femoral open comminuted fractures (type C2 and C3) and may be considered as an alternative surgical methods in the management of these fractures.

Simultaneous, Asymmetrical, Comminuted and Bilateral Ballistic Fractures by Multiple Gunshot Wounds and a Review of Its Literature: A Case Report in Chad

Although open leg fractures are very common in orthopedics and traumatology, bilateral open leg fractures are extremely rare and are usually associated with an increased risk of complications. We report a case of a simultaneous, asymmetrical, comminuted and bilateral open fracture of the tibia and fibula by a firearm that occurred during an escape attempt in a 29-year-old prisoner. The pre-operative radiological assessment found an open fracture of both legs of the ballistic type;multiple traumatic gunshot wounds with a narrow entry hole and a wide exit hole. Early surgical intervention of intravenous antibiotics, tetanus prophylaxis and open fracture irrigation and debridement was performed within the 6 hour rule. The treatment consisted of a posterior splint followed by trimming andosteosynthesis using a FESSA external fixator from the military health service. A second operation was not needed. Evolution was favorable with ambulation starting from the 45th day. Simultaneous and bilateral tibia-fibula fractures by a firearm are exceptional, therefore, the treatment was surgical with the pre-operative and post-operative protocols well managed.

Using fracture-based continuum modeling of coupled geomechanical-hydrological processes for numerical simulation of hydraulic fracturing

This paper describes numerical simulation of hydraulic fracturing using fracture-based continuum modeling(FBCM)of coupled geomechanical-hydrological processes to evaluate a technique for high-density fracturing and fracture caging.The simulations are innovative because of modeling discrete fractures explicitly in continuum analysis.A key advantage of FBCM is that fracture initiation and propagation are modeled explicitly without changing the domain grid(i.e.no re-meshing).Further,multiple realizations of a preexisting fracture distribution can be analyzed using the same domain grid.The simulated hydraulic fracturing technique consists of pressurizing multiple wells simultaneously:initially without permeating fluids into the rock,to seed fractures uniformly and at high density in the wall rock of the wells;followed by fluid injection to propagate the seeded fracture density hydraulically.FBCM combines the ease of continuum modeling with the potential accuracy of modeling discrete fractures and fracturing explicitly.Fractures are modeled as piecewise planar based on intersections with domain elements;fracture geometry stored as continuum properties is used to calculate parameters needed to model individual fractures;and rock behavior is modeled through tensorial aggregation of the behavior of discrete fractures and unfractured rock.Simulations are presented for previously unfractured rock and for rock with preexisting fractures of horizontal,shallow-dipping,steeply dipping,or vertical orientation.Simulations of a single-well model are used to determine the pattern and spacing for a multiple-well design.The results illustrate high-density fracturing and fracture caging through simultaneous fluid injection in multiple wells:for previously unfractured rock or rock with preexisting shallow-dipping or horizontal fractures,and in situ vertical compressive stress greater than horizontal.If preexisting fractures are steeply dipping or vertical,and considering the same in situ stress condition,well pressurization without fluid permeation appears to be the only practical way to induce new fractures and contain fracturing within the target domain.

The finite element analysis of cemented long and short stem prosthetic replacement in aged patients with comminuted intertrochanteric fracture

Objective To investigate the stress distribution of the femur after cemented prosthetic replacement in aged patients with comminuted intertrochanteric fracture and to analyze the difference of stress distribution between cemented long

Biomechanical Comparison of Gourd-shaped LCP versus LCP for Fixation of Comminuted Tibial Shaft Fracture

The purpose of this study was to compare monotonic biomechanical properties of gourd-shaped LCP fixation with LCP fixation of human tibial shaft in gap fracture mode. Twenty paired fresh cadaveric human tibias were randomly divided into 4 groups （5 pairs each）： （1） axial loading sin- gle cycle to failure testing, （2） torsion single cycle to failure testing, （3） 4-point bending single cycle to failure testing, and （4） dynamic 4-point bending testing. A 7-hole 4.5 mm gourd-shaped LCP was se- cured on the anteromedial surface of 1 randomly selected bone from each pair, respectively, using 6 locking screws in the 1st, 2nd, 3rd, 5th, 6th and 7th hole with the middle hole unfilled and just located at the mid-diaphysis of the tibia. A 7-hole 4.5 mm LCP was secured on the other bone with the same method. Standard AO/ASIF techniques were used. After fixation finished, a 10 mm gap in the mid-diaphysis of tibia was created, centrally located at the unfilled hole. The axial, torsional, and bending stiffness and failure strengths were calculated from the collected data in static testings and statisti- cally compared using paired Student＇s t-test. The 4-point bending fatigue lives of the two constructs were calculated from the dynamic testing data and also statistically compared using paired Student＇s t-test. Failure modes were recorded and visually analyzed. P〈0.05 was considered significant. Results showed that the axial, torsional and bending stiffness of gourd-shaped LCP construct was greater （4%, 19%, 12%, respectively, P〈0.05） than that of the LCP construct, and the axial, torsional and bending failure strengths of gourd-shaped LCP construct were stronger （10%, 46%, 29%, respectively, P〈0.05） than those of the LCP construct. Both constructs failed as a result of plate plastic torsional deformation. After axial loading and 4-point bending testings, LCP failed in term of an obvious deformation of bent apex just at the unfilled plate hole, while the gourd-shaped LCP failed in term of a deformation of bent arc between the 3rd and 5th holes, which indicated a more consistent stress distribution on gourd-shaped LCP. Fatigue life of gourd-shaped LCP construct was significantly greater than LCP construct （153 836±2 228 vs. 132 471±6 460 cycles, P〈0.01）. All constructs failed as a result of fracture of the plate through the compression hole of the unfilled combination screw hole. The biomechanical testing showed that gourd-shaped LCP can provide greater stiffness and strength, and longer fatigue life than LCP. The gourd-shaped LCP may be more advantageous mechanically and may reduce the plate breakage rate clinically.

Postoperative Drains at the Donor Sites of Iliac-Crest Bone Grafts in Patients Who Had a Single Comminuted Long Bone Fracture

In this clinical trial, 90 patients admitted to orthopedics ward, Shahid Mohammadi Hospital, Bandar Abbass with a long bone fracture, comminuted more than 30%, were randomly divided into two groups. In the first group, after the completion of the operation, a single hemovaccum drain was inserted into the iliac crest wound, the site of cancellous bone removal, whereas the second group didn’t receive a drain. The two groups were followed for at least six months and the results were compared with Chi-Square and T-Tests. The two groups, at the end of the follow up period, had no statistically significant difference with regard to pain severity and need for dressing change (in the immediate postoperative period), hematoma formation and infection. So it seems that drain insertion in the wound of patients in whom cancellous bone is removed from the iliac crest, is not necessary.

Management and classification of the fracture of lateral process of talus:An overview and literature update

Fracture of the lateral process of the talus(FLPT)is uncommon in clinical practice and can be easily missed or misdiagnosed.In recent years,as researchers from all over the world have further deepened their research on FLPT,there has been a breakthrough in the classification,and the methods and principles of clinical management have changed accordingly;however,there is still no standardized guideline for the diagnosis and management of FLPT,and there have been few relevant literature review articles related to this kind of fracture in the past at least 5 years.In this article,we review the clinical classification,classification-based therapeutic recommendations,and prognosis of FLPT,with the aim of providing a reference for the clinical diagnosis and management of this infrequent fracture.

The Early Outcomes with Titanium Radial Head Implants in the Treatment of Radial Head Comminuted Fractures

The study assessed the early functional outcomes with cemented titanium implants of radius in the treatment of comminuted fractures of radial heads. The functional outcomes of arthro- plasty with cemented titanium implants of radius in the treatment of radial head fractures （Mason Type Ⅲ： 6; Mason Type Ⅳ： 4） in l0 consecutive patients （mean age, 38 years） were evaluated over a mean time of 23.7 months （18-31 months）. The patients were assessed on the basis of physical examination, functional rating （Mayo） and radiographic findings. The parameters evaluated included motion, stability, pain, and grip strength. Five patients were considered to have excellent results, 4 patients had good results and l patient had fairly good results. There were no cases of infection, prosthetic failure, heterotopic ossification or dislocation. When medial collateral ligament was injured, radial head became the main stabilizing structure of the elbow. Titanium radial head implant may provide the stability similar to that of native radial head. We believe that titanium radial head im- plants may be indicated for the Mason Type Ⅲ and Mason Type IV radial head fractures.

A modified 3D mean strain energy density criterion for predicting shale mixed-mode Ⅰ/Ⅲ fracture toughness

The fracture toughness of rocks is a critical fracturing parameter in geo-energy exploitation playing a significant role in fracture mechanics and hydraulic fracturing.The edge-notched disk bending(ENDB)specimens are employed to measure the entire range of mixed-modeⅠ/Ⅲfracture toughness of Longmaxi shale.To theoretically interpret the fracture mechanisms,this research first introduces the detailed derivations of three established fracture criteria.By distinguishing the volumetric and distortional strain energy densities,an improved three-dimensional mean strain energy density(MSED)criterion is proposed.As the critical volumetric to distortional MSED ratio decreases,the transition from tensiondominated fracture to shear-dominated fracture is observed.Our results indicate that both peak load and applied energy increase significantly with the transition from pure mode I(i.e.,tension)to pure modeⅢ(i.e.,torsion or tearing)since mode-Ⅲcracking happens in a twisted manner and mode-Ⅰcracking occurs in a coplanar manner.The macroscopic fracture signatures are consistent with those of triaxial hydraulic fracturing.The average ratio of pure mode-Ⅲfracture toughness to pure mode-Ⅰfracture toughness is 0.68,indicating that the obtained mode-Ⅲfracture resistance for a tensionbased loading system is apparent rather than true.Compared to the three mainstream fracture criteria,the present fracture criterion exhibits greater competitiveness and can successfully evaluate and predict mixed-modeⅠ/Ⅲfracture toughness of distinct materials and loading methods.

Surgical Treatment of Calcaneal Comminuted Intrarticular Fractures: Long-Term Follow-Up

There is a controversy whether the comminuted calcaneal fractures should benefit more from conservative or from surgical treatment. Aiming to contribute to this unsolved clinical question we reviewed the long-term outcome (up to 96 months) of in 44 patients (mean age 35 years) with 47 calcaneal fractures who were treated surgically. In these patients open reduction and internal fixation were performed using a calcaneal reconstruction plate. The functional outcome was measured according to the Rowe Score and the level of pain by Visual Analog Scale. The objective outcome was estimated by the current radiographs. The clinical results were good to excellent in 69% of patients. Poor outcome observed in one patient who developed Complex Regional Pain Syndrome in his foot. The radiographic evaluation showed satisfactory reconstruction (according to the Boehler angle measurements) in 35 of operated calcanei. These results indicate on the satisfactory outcome of surgical treatment in the majority of the patients who were diagnosed with comminuted fracture of calcaneus.

Factors Influencing Proppant Transportation and Hydraulic Fracture Conductivity in Deep Coal Methane Reservoirs

The gas production of deep coalbed methane wells in Linxing-Shenfu block decreases rapidly,the water output is high,the supporting effect is poor,the effective supporting fracture size is limited,and the migration mechanism of proppant in deep coal reservoir is not clear at present.To investigate the migration behavior of proppants in complex fractures during the volume reconstruction of deep coal and rock reservoirs,an optimization test on the conductivity of low-density proppants and simulations of proppant migration in complex fractures of deep coal reservoirs were conducted.The study systematically analyzed the impact of various fracture geometries,proppant types and fracturingfluid viscosities on proppant distribution.Furthermore,the study compared the outcomes of dynamic proppant transport experiments with simulation results.The results show that the numerical simulation is consistent with the results of the proppant dynamic sand-carrying experiment.Under the conditions of low viscosity and large pumping-rate,a high ratio of 40/70 mesh proppant can facilitate the movement of the proppant to the depths of fractures at all levels.The technical goal is to create comprehensive fracture support within intricate trapezoidal fractures in deep coal and rock reservoirs without inducing sand plugging.The sand ratio is controlled at 15%–20%,with a proppant combination ratio of 40/70:30/50:20/40=6:3:1.Proppant pumping operations can effectively address the issue of poor support in complex fractures in deep coal formations.The research results have been successfully applied to the development of deep coalbed methane in the Linxing-Shenfu block,Ordos Basin.

Borehole stability in naturally fractured rocks with drilling mud intrusion and associated fracture strength weakening:A coupled DFN-DEM approach

Borehole instability in naturally fractured rocks poses significant challenges to drilling.Drilling mud invades the surrounding formations through natural fractures under the difference between the wellbore pressure(P w)and pore pressure(P p)during drilling,which may cause wellbore instability.However,the weakening of fracture strength due to mud intrusion is not considered in most existing borehole stability analyses,which may yield significant errors and misleading predictions.In addition,only limited factors were analyzed,and the fracture distribution was oversimplified.In this paper,the impacts of mud intrusion and associated fracture strength weakening on borehole stability in fractured rocks under both isotropic and anisotropic stress states are investigated using a coupled DEM(distinct element method)and DFN(discrete fracture network)method.It provides estimates of the effect of fracture strength weakening,wellbore pressure,in situ stresses,and sealing efficiency on borehole stability.The results show that mud intrusion and weakening of fracture strength can damage the borehole.This is demonstrated by the large displacement around the borehole,shear displacement on natural fractures,and the generation of fracture at shear limit.Mud intrusion reduces the shear strength of the fracture surface and leads to shear failure,which explains that the increase in mud weight may worsen borehole stability during overbalanced drilling in fractured formations.A higher in situ stress anisotropy exerts a significant influence on the mechanism of shear failure distribution around the wellbore.Moreover,the effect of sealing natural fractures on maintaining borehole stability is verified in this study,and the increase in sealing efficiency reduces the radial invasion distance of drilling mud.This study provides a directly quantitative prediction method of borehole instability in naturally fractured formations,which can consider the discrete fracture network,mud intrusion,and associated weakening of fracture strength.The information provided by the numerical approach(e.g.displacement around the borehole,shear displacement on fracture,and fracture at shear limit)is helpful for managing wellbore stability and designing wellbore-strengthening operations.

Management of geriatric acetabular fractures:Contemporary treatment strategies

Acetabular fractures in the geriatric population are typically low-energy fractures resulting from a fall from standing height.Compromised bone quality in the elderly,as well as this population’s concomitant medical comorbidities,render the management of such fractures challenging and controversial.Non-operative management remains the mainstay of treatment,although such a choice is associated with numerous and serious complications related to both the hip joint as well as the general condition of the patient.On the other hand,operatively treating acetabular fractures(e.g.,with osteosynthesis or total hip arthroplasty)is gaining popularity.Osteosynthesis can be performed with open reduction and internal fixation or with minimally invasive techniques.Total hip arthroplasty could be performed either in the acute phase combined with osteosynthesis or as a delayed procedure after a period of non-operative management or after failed osteosynthesis of the acetabulum.Regardless of the implemented treatment,orthogeriatric co-management is considered extremely crucial,and it is currently one of the pillars of a successful outcome after an acetabular fracture.

Beyond the imaging evaluation of fractures of the lateral process of the talus:Let’s not forget concomitant injuries

Fractures of the lateral process of the talus(FLPT)are uncommon fractures that represent a clinical challenge.Traditional radiological classification systems rely predominantly on radiographic findings.However,due to the high rate of FLPT misdiagnosis and the limited accuracy in evaluating concomitant talar injuries through plain radiographs,novel imaging classification systems have been developed that aim to enhance the diagnosis of concomitant talar injuries,thereby optimizing patient management and reducing the incidence of long-term complications.

Long-Term Clinical and Radiological Outcome in Primary Hemiarthroplasty for Comminuted Humeral Head Fractures in the Elderly: A 5 - 10 Years Follow-Up Prospective Study

Objective: In the constantly growing population of people beyond the age of 60 years, the incidence of complex comminuted humeral head fractures increases, thus increasing the need for prosthetic replacement. The purpose of this study was to determine the long-term results after primary hemiarthroplasty in patients older than 60 years. Methods: From 08/2010 to 12/2015 a prospective study of 54 patients (mean age 75 years) with complex humeral head fracture was performed at the University Hospital Rostock. 24 patients were available for follow-up after 5 - 10 years. Pain, the Karnofsky-index, and the range of motion were obtained as well as radiographs in two planes. The Constant-Murley score and the UCLA rating system were evaluated for functional assessment. Results: 15 patients were painfree. The Karnofsky index deteriorated from 94 preoperatively to 70. The Constant-Murley score of the operated extremity reached 47 points out of possible 100, the uninjured side scored 82 points. The age-specific Constant-Murley score showed more favorable results. The UCLA rating system values leveled up to 22 out of 35 points for the replaced shoulder and 33 points for the other arm. Radiologically, more than 50% of the implants were classified as non-centered and the acromio-humeral space diminished significantly. Conclusions: Primary hemiarthroplasty helps to restore a situation of little or no pain whereas functional and radiological outcome remains limited. Revision surgery or conversion to reverse shoulder arthroplasty was not indicated in any case supporting the clinical value of hemiarthroplasty.

Epidemiologic investigation of pediatric distal humerus fractures: An American insurance claims database study

BACKGROUND Distal humerus elbow fractures are one of the most common traumatic fractures seen in pediatric patients and present as three main types:Supracondylar(SC),lateral condyle(LC),and medial epicondyle(ME)fractures.AIM To evaluate the epidemiology of pediatric distal humerus fractures(SC,LC,and ME)from an American insurance claims database.METHODS A retrospective review was performed on patients 17 years and younger with the ICD 9 and 10 codes for SC,LC and ME fractures based on the IBM Truven MarketScan®Commercial and IBM Truven MarketScan Medicare Supplemental databases.Patients from 2015 to 2020 were queried for treatments,patient age,sex,length of hospitalization,and comorbidities.RESULTS A total of 1133 SC,154 LC,and 124 ME fractures were identified.SC fractures had the highest percentage of operation at 83%,followed by LC(78%)and ME fractures(41%).Male patients were,on average,older than female patients for both SC and ME fractures.CONCLUSION In the insurance claims databases used,SC fractures were the most reported,followed by LC fractures,and finally ME fractures.Age was identified to be a factor for how a pediatric distal humerus fractures,with patients with SC and LC fractures being younger than those with ME fractures.The peak age per injury per sex was similar to reported historic central tendencies,despite reported trends for younger physiologic development.

Treatment of a femoral neck fracture combined with ipsilateral femoral head and intertrochanteric fractures: A case report

BACKGROUND This article presents a rare case of a complex hip fracture involving the ipsilateral femoral neck,trochanter,and femoral head,that was accompanied by hip dislocation.Currently,there is no established standard treatment method for this specific type of fracture.Therefore,it is crucial to comprehensively consider factors such as patient age,fracture type,and degree of displacement to achieve a successful outcome.CASE SUMMARY A 38-year-old man sustained a comminuted fracture of his right hip as a result of a car accident.The injuries included a fracture of the femoral head,a fracture of the femoral neck,an intertrochanteric fracture of the femur,and a posterior dislocation of the hip on the same side.We opted for a treatment approach combining the use of a proximal femoral locking plate,cannulated screws,and Kirschner wires.Following the surgery,we developed an individualized rehabil-itation program to restore patient limb function.CONCLUSION For this complex fracture,we selected appropriate internal fixation and for-mulated individualized rehabilitation,which ultimately achieved good results.

Assessing the readability of online information about jones fracture

BACKGROUND Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look toward the internet as their primary source of information to learn about their respective medical conditions.The American Medical Association and National Institute of Health strongly recommend that online medical information be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.AIM To assess the readability of online information regarding Jones fracture.Our hypothesis is that the reading level of medical information published on websites far exceeds the recommended reading level of 6th-8th grade as proposed by the American Medical Associate and National Institute of Health.The result of this study can help us formulate improved recommendations for publishing more comprehensible material and,thus,eventually improve patient compliance and clinical outcomes.METHODS The exact phrase“Jones fracture”was queried on the three most common search engines,Google,Yahoo!,and Bing,on December 28,2022.As of December 2022,Google held 84%,Bing held 9%,and Yahoo!held 2%of the worldwide search engine market share.Web pages uniform resource locator from the first three pages of search results were recorded from each search engine.These web pages were classified according to academic,physician-sponsored,governmental and non-government organizations(NGO),commercial,and unspecified as per formally defined categories.Websites associated with an educational institution or medical organization were classified as academic.Websites with products for sale,corporate sponsorship,or advertisements were classified as commercial.Governmental websites or NGOs comprised those that received government subsidies or grants.Webpages that were independently owned by physicians or physician groups were respectively classed as physician sponsored.The remainder of websites that did not fall under the above categories were classified as unspecified.RESULTS A total of 93 websites were analyzed for reading assessment.A whopping 44%of websites were commercial,followed by 22%of physician-sponsored websites.Third place belonged to non-government organization websites holding a 15%share.The academic website held a meager 9%portion,while unspecified sites were 3%.The table illustrates mean readability scores,along with average cumulative grade level.The average grade level was 10.95±2.28 for all websites,with a range of 6.18 to 18.90.Since P values were more than 0.05,there was not a significant statistical difference between the first page results and the results of all pages.Thus,we can rationalize that readability scores are consistent throughout all pages of a website.CONCLUSION Hand in hand with technological advancements,treatment modalities continue to grow.With the turn of the century,the internet has become the number one source of information for almost every topic.Thus,many patients look towards the internet as the primary source of information to learn about their respective medical conditions.Our study demonstrates that current online medical information regarding Jones fracture is written at an extraordinarily high-grade level,with an average grade level of all websites at 10.95,nearly an 10th-grade educational level.The American Medical Association and National Institute of Health strongly recommend that online medical information should be written at the 6th to 8th-grade level to aid comprehension by patients of all literacy backgrounds.On the contrary,most of the medical information evaluated was at an 10th-grade level,which far exceeds recommendations by AMA and NIH.This is particularly relevant because readability scores are directly proportional to the level of comprehension attained by readers,thus directly impacting patient outcomes.In conclusion,we suggest and encourage that all online reading materials should be re-written at the 6th to 8th-grade level in a public service effort to increase compliance with treatment goals and raise awareness of preventive measures.

Production induced fracture closure of deep shale gas well under thermo-hydro-mechanical conditions

Deep shale gas reservoirs have geological characteristics of high temperature,high pressure,high stress,and inferior ability to pass through fluids.The multi-stage fractured horizontal well is the key to exploiting the deep shale gas reservoir.However,during the production process,the effectiveness of the hydraulic fracture network decreases with the closure of fractures,which accelerates the decline of shale gas production.In this paper,we addressed the problems of unclear fracture closure mechanisms and low accuracy of shale gas production prediction during deep shale gas production.Then we established the fluid—solid—heat coupled model coupling the deformation and fluid flow among the fracture surface,proppant and the shale matrix.When the fluid—solid—heat coupled model was applied to the fracture network,it was well solved by our numerical method named discontinuous discrete fracture method.Compared with the conventional discrete fracture method,the discontinuous discrete fracture method can describe the three-dimensional morphology of the fracture while considering the effect of the change of fracture surface permeation coefficient on the coupled fracture—matrix flow and describing the displacement discontinuity across the fracture.Numerical simulations revealed that the degree of fracture closure increases as the production time proceeds,and the degree of closure of the secondary fractures is higher than that of the primary fractures.Shale creep and proppant embedment both increase the degree of fracture closure.The reduction in fracture surface permeability due to proppant embedment reduces the rate of fluid transfer between matrix and fracture,which has often been overlooked in the past.However,it significantly impacts shale gas production,with calculations showing a 24.7%cumulative three-year yield reduction.This study is helpful to understand the mechanism of hydraulic fracture closure.Therefore,it provides the theoretical guidance for maintaining the long-term effectiveness of hydraulic fractures.