Effect of navigation endoscopy combined with threedimensional printing technology in the treatment of orbital blowout fractures

●AIM:To explore the combined application of surgical navigation nasal endoscopy(NNE)and three-dimensional printing technology(3DPT)for the adjunctive treatment of orbital blowout fractures(OBF).●METHODS:Retrospective analysis was conducted on the data of patients with OBF who underwent surgical treatment at the Affiliated Eye Hospital of Nanchang University between July 2012 and November 2022.The control group consisted of patients who received traditional surgical treatment(n=43),while the new surgical group(n=52)consisted of patients who received NNE with 3DPT.The difference in therapeutic effects between the two groups was evaluated by comparing the duration of the operation,best corrected visual acuity(BCVA),enophthalmos difference,recovery rate of eye movement disorder,recovery rate of diplopia,and incidence of postoperative complications.●RESULTS:The study included 95 cases(95 eyes),with 63 men and 32 women.The patients’age ranged from 5 to 67y(35.21±15.75y).The new surgical group and the control group exhibited no statistically significant differences in the duration of the operation,BCVA and enophthalmos difference.The recovery rates of diplopia in the new surgical group were significantly higher than those in the control group at 1mo[OR=0.03,95%CI(0.01–0.15),P<0.0000]and 3mo[OR=0.11,95%CI(0.03–0.36),P<0.0000]postoperation.Additionally,the recovery rates of eye movement disorders at 1 and 3mo after surgery were OR=0.08,95%CI(0.03–0.24),P<0.0000;and OR=0.01,95%CI(0.00–0.18),P<0.0000.The incidence of postoperative complications was lower in the new surgical group compared to the control group[OR=4.86,95%CI(0.95–24.78),P<0.05].●CONCLUSION:The combination of NNE and 3DPT can shorten the recovery time of diplopia and eye movement disorder in patients with OBF.

Biomechanical analysis of an absorbable material for treating fractures of the inferior orbital wall

AIM:To investigate the biomechanical properties and practical application of absorbable materials in orbital fracture repair.METHODS:The three-dimensional(3D)model of orbital blowout fractures was reconstructed using Mimics21.0 software.The repair guide plate model for inferior orbital wall fracture was designed using 3-matic13.0 and Geomagic wrap 21.0 software.The finite element model of orbital blowout fracture and absorbable repair plate was established using 3-matic13.0 and ANSYS Workbench 21.0 software.The mechanical response of absorbable plates,with thicknesses of 0.6 and 1.2 mm,was modeled after their placement in the orbit.Two patients with inferior orbital wall fractures volunteered to receive single-layer and double-layer absorbable plates combined with 3D printing technology to facilitate surgical treatment of orbital wall fractures.RESULTS:The finite element models of orbital blowout fracture and absorbable plate were successfully established.Finite element analysis(FEA)showed that when the Young’s modulus of the absorbable plate decreases to 3.15 MPa,the repair material with a thickness of 0.6 mm was influenced by the gravitational forces of the orbital contents,resulting in a maximum total deformation of approximately 3.3 mm.Conversely,when the absorbable plate was 1.2 mm thick,the overall maximum total deformation was around 0.4 mm.The half-year follow-up results of the clinical cases confirmed that the absorbable plate with a thickness of 1.2 mm had smaller maximum total deformation and better clinical efficacy.CONCLUSION:The biomechanical analysis observations in this study are largely consistent with the clinical situation.The use of double-layer absorbable plates in conjunction with 3D printing technology is recommended to support surgical treatment of infraorbital wall blowout fractures.

Reconstruction of complex orbital fracture with titanium implants

AIM: To evaluate the effectiveness and safety of complex orbital fracture reconstruction with titanium implants. METHODS: A retrospective review of 46 patients treated with complex orbital fractures reconstruction using titanium implants from January 2005 to December 2008 was conducted. The following data were recorded: age, gender, mechanism of injury, preoperative and postoperative orbital CT, visual acuity, diplopia, ocular motility and Hertel exophthalmometer. RESULTS: The most common cause was motor vehicle accident (47.8%), followed by industrial injury (30.4%). All patients had improved appearance after operation and CT scan at one week after operation showed the fracture defects of orbit and neighboring areas had been reconstructed. Forty-six cases had various degrees of enophthalmos before operation. Among them, 32 cases were completely corrected, 11 cases improved obviously and 3 cases had no improvement after operation. Thirty-six patients with visual acuity =20/60 revealed diplopia of various degrees, including 26 patients had diplopia in right ahead and/or reading positions. At the sixth month after operation, diplopia disappeared in five patients, 7 patients still had diplopia in right ahead and/or reading positions, 14 patients had diplopia in positions rather than right ahead and reading positions (<20 degrees) and ten patients had diplopia only at peripheral gazing (>20 degrees). All patients had various degrees of ocular motility disorders before operation. At the sixth month after operation, eyeball movement disorder disappeared in 9 patients, 31 patients showed improvement and 6 patients had no improvement. Complications of implant infection, rejection and displacement were not reported after operation. CONCLUSION: The application of titanium implants in the repair of complex orbital fractures greatly improves the appearance and functional results, which is a favorable material for plastic surgery of complex orbital fracture.

Analysis of the effect of repair materials for orbital blowout fracture on complications

AIM: To investigate the effect of repair materials for orbital blowout fractures on the occurrence of postoperative complications. METHODS: The clinical data and follow-up data of 54 subjects with orbital blowout fractures were retrospectively analyzed. The study was divided into three groups according to the used repair materials: titanium mesh(16 cases), Medpor(12 cases), and Medpor titanium mesh(26 cases). All test data were analyzed using the SPSS version 23.0 statistical software. The mean age and duration of disease between the groups were compared through oneway analysis of variance. The Chi-square(χ~2) test was used to compare the number of males and females, different fracture types, and different surgical approaches among groups. The χ~2 test was used to compare the frequencies for complications in each group.RESULTS: The baseline characteristics of age and gender in each group were matched(F=1.763, P=0.172;χ~2=0.026, P=0.987). In addition, there was no difference in the type of fracture and surgical approach(χ~2=0.460, P=0.977;χ~2=0.691, P=0.952), or the incidence of complications(χ~2=0.081, P=0.960) between the three groups. CONCLUSION: Although there is no difference in effect of various repair materials on the incidence of complications, the effect of repair materials on postoperative complications of orbital blowout fractures should not be ignored.

Role of orthoptics and scoring system for orbital floor blowout fracture:surgical or conservative treatment

AIM:To assess the role of orthoptics in referring patients with orbital floor blowout fracture(OFBF)for conservative or surgical treatment and based on the results,to propose a scoring system for such decision making.METHODS:A retrospective analysis of 69 patients with OFBF was performed(35 treated conservatively,34 surgically).The role of orthoptics in referring to surgery or conservative treatment was retrospectively evaluated,the factors with the highest significance for decision making were identified,and a scoring system proposed using Logistic regression.RESULTS:According to defined criteria,the treatment was unsuccessful in 2(6%)surgically treated and only in one(3%)conservatively treated patient.The proposed scoring system includes the defect size and several values resulting from the orthoptic examination,the elevation of the eyebulb measured on Lancaster screen being the most significant.CONCLUSION:The study demonstrates the benefits of orthoptic examination when making decisions on conservative or surgical treatment and for diagnosing ocular motility disorder(with or without binocular diplopia)in OFBF patients.The proposed scoring system could,following verification in a prospective study,become a valuable adjunctive tool.

Temporary severe oculomotor nerve palsy after reconstruction of orbital medial wall fracture: a case report of nonfamiliar complication

Dear Editor, Commonly known complications following reconstruction of an orbital fracture include diplopia, hemorrhage, and displacement or infection of the orbital implant, and some studies have reported ptosis caused by temporary or permanent oculomotor nerve palsy after operation.

Repeated Hemorrhage after Repair of Orbital Floor Fracture with a Silicone Implant

A 16-year-old girl was accidentally kicked in her right eye by her cheerleading teammate in an exercise. Upward gaze ability of her right eye was severely impaired and computed tomography (CT) showed a trapdoor fracture of the right orbital floor. After surgical exploration, a silicone implant was inserted. No bleeding was confirmed at this time. The next day, CT detected a hematoma on the right orbital floor. The hematoma was drained and meticulous cautery was used to control any potential bleeding. The same silicone implant was re-inserted. Irrespective of attempts to avoid hemorrhage, this occurred twice after the respective evacuations. During a fourth operation, we removed the silicone implant simultaneously with hematoma evacuation. No hematoma has occurred since, and the patient’s ocular movement has dramatically improved to a normal binocular single vision field. When repeated hemorrhages occur after an orbital floor fracture repair with insertion of a silicone implant, removal of the implant is an effective strategy to resolve the hemorrhage.

Water balloon-induced orbital fracture in an aviator

Background:Orbital fractures are common injuries found in facial trauma.Typical etiologies of orbital fractures include motor vehicle collisions and assault.We report the case of a 32-year-old male who suffered an orbital fracture from a water balloon.Additionally,we describe the aeromedical complications that may result from this injury.Finally,we attempt to answer the question of when a patient may return to flying after sustaining such an injury through review of the literature.Case presentation:A 32-year-old male pilot with the United States Air Force was at an outdoor event with his unit when he was struck with a water balloon launched from a sling shot into his left orbit.Shortly afterwards,he had an onset of subcutaneous emphysema and was escorted to a nearby Emergency Department.Computed tomography identified an orbital fracture with associated orbital and subcutaneous emphysema.The patient was evaluated by a plastic surgeon and was determined not to be a surgical candidate.Four weeks later,he returned to flying status.Conclusions:Water balloons are thought to be safe and harmless toys.However,when coupled with sling shots,water balloons can become formidable projectiles capable of significant orbital injury including orbital fractures.These injuries are concerning to aviators,as the most common sites for fractures of the orbit are the thin ethmoid and maxillary bones adjacent to the sinuses.At altitude,gases in the sinuses may expand and enter the orbit through these fractures,which may suddenly incapacitate the flyer.It is important for flight surgeons to identify and assess these individuals to determine suitability for flying.

Ophthalmologic Repercussions of Orbital Fractures

Orbital fractures refer to all continuity solutions involving the wall of the orbit. They are responsible for serious complications, particularly ophthalmological. Objective: To identify the epidemiological, anatomical and clinical aspects as well as the possible ocular complications of orbital fractures in the Gbêkê region. Methods: Prospective study from July 1, 2020, to October 31, 2020, i.e., a duration of 4 months. It took place in the ophthalmology department of the University Hospital of Bouaké. Patients with orbital fractures with ocular repercussions received during the study period were included. Results: Out of 27 cases of orbital floor fracture received, 20 had ocular complications, i.e., a prevalence of 74.07%. The average age was 32 years with extremes of 18 and 48 years. The male gender predominated with 80%, i.e. a sex ratio of 4. Subconjunctival hemorrhage was the most frequent reason for consultation (70%). The etiology was dominated by road traffic accidents (85%). The average consultation time was 24 hours. 80% of the patients had a distance visual acuity (DVA) between 3/10 and 10/10.) Diplopia was observed in 60% of patients. Blow out fracture (70%) was the most prominent orbital lesion. At the paraclinical level, 80% of the patients had performed a CT scan of the orbit. Evisceration was the predominant ophthalmologic surgical management (4 patients). At the bone level, reconstruction of the orbital floor with a polydioxanone plate (PDS) was performed in 50% of patients. Conclusion: The risk of ocular injury in orbital fractures is frequent because of the close relationship between the orbit and the eyeball.

Eyelid malposition after orbital fracture surgery

Orbital fractures generally do not cause eyelid malposition.Studies have shown that mostly eyelid malposition is mainly due to the choice of surgical approaches of orbital fracture repair.Approaches are divided into transcutaneous and transconjunctival ones.The application of orbital fracture approaches depends on fractures’range and the surgeons’preferences.Eyelid malposition after orbital fracture surgery is not only an aesthetic concern but also a functional complication,which will cause eyes discomfort,such as corneal exposure and ocular irritation.Some patients may have multiple types of eyelid malposition.In this review,we summarized the surgical approaches of orbital fractures and the complications including scar,ectropion,retraction,entropion,flattening,laceration and lacrimal canaliculus avulsion and notch deformity that associated with eyelid,especially the lower eyelid.Reports revealed that the scar usually occurred in infraorbital incisions compared with subtarsal and subciliary incisions,and the transconjunctival approach had a higher incidence of entropion and flattening,and less ectropion than the transcutaneous approach.Meanwhile,pathogenesis of eyelid malposition after orbital fracture surgery are discussed.Furthermore,to prevent eyelid malposition complications,doctors should choose the appropriate orbital fracture approach according to the patient’s needs,and delicate tissue management,technical expertise,and meticulous hemostasis are necessary.Conservative treatment with taping,lubricating ointment,and steroid for eyelid malposition complications should be performed first,and then surgical intervention when the conservative treatment fails.

Pulp health and calcific healing of a complicated crown–root fracture with additional root fracture in a maxillary incisor: A case report

BACKGROUND Complicated crown–root fracture (CRF) involves severe injury to the crown, root,and pulp, and may be accompanied by multiple root fractures. The loss of a toothhas lifelong consequences for children and teenagers, but the maintenance of pulphealth and the calcific healing of multiple root fractures are rarely reported in theliterature.CASE SUMMARY This case reports healing of a permanent tooth with complicated crown–root andadditional root fractures, in which pulp health was maintained. A 10-year-old girlfell and fractured the root of her maxillary left central incisor at the cervical level.After the coronal fragment was repositioned, the tooth was splinted until thetooth was no longer mobile, 2 years later. Eight years after treatment, the toothhas remained asymptomatic with vital pulp and localized gingival overgrowth.Cone-beam computed tomography revealed not only calcified healing of the CRFbut also spontaneous healing in an additional undiagnosed root fracture. Thefracture line on the enamel could not be healed by hard tissue and formed agroove in the cervical crown. It was speculated that the groove was related to thelocalized gingival overgrowth.CONCLUSION This case provides a clinical perspective of the treatment of a tooth with acomplicated CRF and an additional root fracture.

Using fracture-based continuum modeling of coupled geomechanical-hydrological processes for numerical simulation of hydraulic fracturing

This paper describes numerical simulation of hydraulic fracturing using fracture-based continuum modeling(FBCM)of coupled geomechanical-hydrological processes to evaluate a technique for high-density fracturing and fracture caging.The simulations are innovative because of modeling discrete fractures explicitly in continuum analysis.A key advantage of FBCM is that fracture initiation and propagation are modeled explicitly without changing the domain grid(i.e.no re-meshing).Further,multiple realizations of a preexisting fracture distribution can be analyzed using the same domain grid.The simulated hydraulic fracturing technique consists of pressurizing multiple wells simultaneously:initially without permeating fluids into the rock,to seed fractures uniformly and at high density in the wall rock of the wells;followed by fluid injection to propagate the seeded fracture density hydraulically.FBCM combines the ease of continuum modeling with the potential accuracy of modeling discrete fractures and fracturing explicitly.Fractures are modeled as piecewise planar based on intersections with domain elements;fracture geometry stored as continuum properties is used to calculate parameters needed to model individual fractures;and rock behavior is modeled through tensorial aggregation of the behavior of discrete fractures and unfractured rock.Simulations are presented for previously unfractured rock and for rock with preexisting fractures of horizontal,shallow-dipping,steeply dipping,or vertical orientation.Simulations of a single-well model are used to determine the pattern and spacing for a multiple-well design.The results illustrate high-density fracturing and fracture caging through simultaneous fluid injection in multiple wells:for previously unfractured rock or rock with preexisting shallow-dipping or horizontal fractures,and in situ vertical compressive stress greater than horizontal.If preexisting fractures are steeply dipping or vertical,and considering the same in situ stress condition,well pressurization without fluid permeation appears to be the only practical way to induce new fractures and contain fracturing within the target domain.

Management and classification of the fracture of lateral process of talus:An overview and literature update

Fracture of the lateral process of the talus(FLPT)is uncommon in clinical practice and can be easily missed or misdiagnosed.In recent years,as researchers from all over the world have further deepened their research on FLPT,there has been a breakthrough in the classification,and the methods and principles of clinical management have changed accordingly;however,there is still no standardized guideline for the diagnosis and management of FLPT,and there have been few relevant literature review articles related to this kind of fracture in the past at least 5 years.In this article,we review the clinical classification,classification-based therapeutic recommendations,and prognosis of FLPT,with the aim of providing a reference for the clinical diagnosis and management of this infrequent fracture.

A modified 3D mean strain energy density criterion for predicting shale mixed-mode Ⅰ/Ⅲ fracture toughness

The fracture toughness of rocks is a critical fracturing parameter in geo-energy exploitation playing a significant role in fracture mechanics and hydraulic fracturing.The edge-notched disk bending(ENDB)specimens are employed to measure the entire range of mixed-modeⅠ/Ⅲfracture toughness of Longmaxi shale.To theoretically interpret the fracture mechanisms,this research first introduces the detailed derivations of three established fracture criteria.By distinguishing the volumetric and distortional strain energy densities,an improved three-dimensional mean strain energy density(MSED)criterion is proposed.As the critical volumetric to distortional MSED ratio decreases,the transition from tensiondominated fracture to shear-dominated fracture is observed.Our results indicate that both peak load and applied energy increase significantly with the transition from pure mode I(i.e.,tension)to pure modeⅢ(i.e.,torsion or tearing)since mode-Ⅲcracking happens in a twisted manner and mode-Ⅰcracking occurs in a coplanar manner.The macroscopic fracture signatures are consistent with those of triaxial hydraulic fracturing.The average ratio of pure mode-Ⅲfracture toughness to pure mode-Ⅰfracture toughness is 0.68,indicating that the obtained mode-Ⅲfracture resistance for a tensionbased loading system is apparent rather than true.Compared to the three mainstream fracture criteria,the present fracture criterion exhibits greater competitiveness and can successfully evaluate and predict mixed-modeⅠ/Ⅲfracture toughness of distinct materials and loading methods.

Factors Influencing Proppant Transportation and Hydraulic Fracture Conductivity in Deep Coal Methane Reservoirs

The gas production of deep coalbed methane wells in Linxing-Shenfu block decreases rapidly,the water output is high,the supporting effect is poor,the effective supporting fracture size is limited,and the migration mechanism of proppant in deep coal reservoir is not clear at present.To investigate the migration behavior of proppants in complex fractures during the volume reconstruction of deep coal and rock reservoirs,an optimization test on the conductivity of low-density proppants and simulations of proppant migration in complex fractures of deep coal reservoirs were conducted.The study systematically analyzed the impact of various fracture geometries,proppant types and fracturingfluid viscosities on proppant distribution.Furthermore,the study compared the outcomes of dynamic proppant transport experiments with simulation results.The results show that the numerical simulation is consistent with the results of the proppant dynamic sand-carrying experiment.Under the conditions of low viscosity and large pumping-rate,a high ratio of 40/70 mesh proppant can facilitate the movement of the proppant to the depths of fractures at all levels.The technical goal is to create comprehensive fracture support within intricate trapezoidal fractures in deep coal and rock reservoirs without inducing sand plugging.The sand ratio is controlled at 15%–20%,with a proppant combination ratio of 40/70:30/50:20/40=6:3:1.Proppant pumping operations can effectively address the issue of poor support in complex fractures in deep coal formations.The research results have been successfully applied to the development of deep coalbed methane in the Linxing-Shenfu block,Ordos Basin.

Borehole stability in naturally fractured rocks with drilling mud intrusion and associated fracture strength weakening:A coupled DFN-DEM approach

Borehole instability in naturally fractured rocks poses significant challenges to drilling.Drilling mud invades the surrounding formations through natural fractures under the difference between the wellbore pressure(P w)and pore pressure(P p)during drilling,which may cause wellbore instability.However,the weakening of fracture strength due to mud intrusion is not considered in most existing borehole stability analyses,which may yield significant errors and misleading predictions.In addition,only limited factors were analyzed,and the fracture distribution was oversimplified.In this paper,the impacts of mud intrusion and associated fracture strength weakening on borehole stability in fractured rocks under both isotropic and anisotropic stress states are investigated using a coupled DEM(distinct element method)and DFN(discrete fracture network)method.It provides estimates of the effect of fracture strength weakening,wellbore pressure,in situ stresses,and sealing efficiency on borehole stability.The results show that mud intrusion and weakening of fracture strength can damage the borehole.This is demonstrated by the large displacement around the borehole,shear displacement on natural fractures,and the generation of fracture at shear limit.Mud intrusion reduces the shear strength of the fracture surface and leads to shear failure,which explains that the increase in mud weight may worsen borehole stability during overbalanced drilling in fractured formations.A higher in situ stress anisotropy exerts a significant influence on the mechanism of shear failure distribution around the wellbore.Moreover,the effect of sealing natural fractures on maintaining borehole stability is verified in this study,and the increase in sealing efficiency reduces the radial invasion distance of drilling mud.This study provides a directly quantitative prediction method of borehole instability in naturally fractured formations,which can consider the discrete fracture network,mud intrusion,and associated weakening of fracture strength.The information provided by the numerical approach(e.g.displacement around the borehole,shear displacement on fracture,and fracture at shear limit)is helpful for managing wellbore stability and designing wellbore-strengthening operations.

Management of geriatric acetabular fractures:Contemporary treatment strategies

Acetabular fractures in the geriatric population are typically low-energy fractures resulting from a fall from standing height.Compromised bone quality in the elderly,as well as this population’s concomitant medical comorbidities,render the management of such fractures challenging and controversial.Non-operative management remains the mainstay of treatment,although such a choice is associated with numerous and serious complications related to both the hip joint as well as the general condition of the patient.On the other hand,operatively treating acetabular fractures(e.g.,with osteosynthesis or total hip arthroplasty)is gaining popularity.Osteosynthesis can be performed with open reduction and internal fixation or with minimally invasive techniques.Total hip arthroplasty could be performed either in the acute phase combined with osteosynthesis or as a delayed procedure after a period of non-operative management or after failed osteosynthesis of the acetabulum.Regardless of the implemented treatment,orthogeriatric co-management is considered extremely crucial,and it is currently one of the pillars of a successful outcome after an acetabular fracture.

Beyond the imaging evaluation of fractures of the lateral process of the talus:Let’s not forget concomitant injuries

Fractures of the lateral process of the talus(FLPT)are uncommon fractures that represent a clinical challenge.Traditional radiological classification systems rely predominantly on radiographic findings.However,due to the high rate of FLPT misdiagnosis and the limited accuracy in evaluating concomitant talar injuries through plain radiographs,novel imaging classification systems have been developed that aim to enhance the diagnosis of concomitant talar injuries,thereby optimizing patient management and reducing the incidence of long-term complications.

Epidemiologic investigation of pediatric distal humerus fractures: An American insurance claims database study

BACKGROUND Distal humerus elbow fractures are one of the most common traumatic fractures seen in pediatric patients and present as three main types:Supracondylar(SC),lateral condyle(LC),and medial epicondyle(ME)fractures.AIM To evaluate the epidemiology of pediatric distal humerus fractures(SC,LC,and ME)from an American insurance claims database.METHODS A retrospective review was performed on patients 17 years and younger with the ICD 9 and 10 codes for SC,LC and ME fractures based on the IBM Truven MarketScan®Commercial and IBM Truven MarketScan Medicare Supplemental databases.Patients from 2015 to 2020 were queried for treatments,patient age,sex,length of hospitalization,and comorbidities.RESULTS A total of 1133 SC,154 LC,and 124 ME fractures were identified.SC fractures had the highest percentage of operation at 83%,followed by LC(78%)and ME fractures(41%).Male patients were,on average,older than female patients for both SC and ME fractures.CONCLUSION In the insurance claims databases used,SC fractures were the most reported,followed by LC fractures,and finally ME fractures.Age was identified to be a factor for how a pediatric distal humerus fractures,with patients with SC and LC fractures being younger than those with ME fractures.The peak age per injury per sex was similar to reported historic central tendencies,despite reported trends for younger physiologic development.

Treatment of a femoral neck fracture combined with ipsilateral femoral head and intertrochanteric fractures: A case report

BACKGROUND This article presents a rare case of a complex hip fracture involving the ipsilateral femoral neck,trochanter,and femoral head,that was accompanied by hip dislocation.Currently,there is no established standard treatment method for this specific type of fracture.Therefore,it is crucial to comprehensively consider factors such as patient age,fracture type,and degree of displacement to achieve a successful outcome.CASE SUMMARY A 38-year-old man sustained a comminuted fracture of his right hip as a result of a car accident.The injuries included a fracture of the femoral head,a fracture of the femoral neck,an intertrochanteric fracture of the femur,and a posterior dislocation of the hip on the same side.We opted for a treatment approach combining the use of a proximal femoral locking plate,cannulated screws,and Kirschner wires.Following the surgery,we developed an individualized rehabil-itation program to restore patient limb function.CONCLUSION For this complex fracture,we selected appropriate internal fixation and for-mulated individualized rehabilitation,which ultimately achieved good results.