It is identified that barely passing electrons are the drive of the e-fishbones, rather than the barely trapped electrons at low frequency. The frequency jump in e-fishbone experiments is reproduced and analyzed. It i...It is identified that barely passing electrons are the drive of the e-fishbones, rather than the barely trapped electrons at low frequency. The frequency jump in e-fishbone experiments is reproduced and analyzed. It is found that the e-fishbone frequency increases with the hot electron energy, which is consistent with the experiments. The growth rate of the mode （m= 2, n = 2） is greater than that of the mode （m = 1, n = 1）.展开更多
The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation f...The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.展开更多
In this study, analytical relations for evaluating the exact solution of natural fre- quency and mode shape of beams with embedded shape memory alloy （SMA） wires are presented. Beams are modeled according to Euler-B...In this study, analytical relations for evaluating the exact solution of natural fre- quency and mode shape of beams with embedded shape memory alloy （SMA） wires are presented. Beams are modeled according to Euler-Bernoulli, Timoshenko and third order beam （Reddy） the- ories. A relation is obtained for determining the effect of axial load generated by the recovery action of pre-strained SMA wires. By defining some dimensionless quantities~ the effect of different me- chanical properties on the frequencies and mode shapes of the system are carefully examined. The effect of axial load generated by SMA wires with buckling load and frequency jump is accurately studied.展开更多
基金Supported by the Funds of the Youth Innovation Team of Science and Technology in Sichuan Province of China under Grant No2014TD0023the National Natural Science Foundation of China under Grant Nos 11447228,11261140327,11005035 and 11205053the Project-the Plasma Confinement in the Advanced Magnetic Mirror under Grant No WX-2015-01-01
文摘It is identified that barely passing electrons are the drive of the e-fishbones, rather than the barely trapped electrons at low frequency. The frequency jump in e-fishbone experiments is reproduced and analyzed. It is found that the e-fishbone frequency increases with the hot electron energy, which is consistent with the experiments. The growth rate of the mode （m= 2, n = 2） is greater than that of the mode （m = 1, n = 1）.
文摘The China initiative Accelerator Driven System,CiADS,physics design adopts 162.5 MHz,325 MHz,and 650 MHz cavities,which are driven by the corresponding radio frequency(RF)power system,requiring frequency translation front-end for the RF station.For that application,a general-purpose design front-end prototype has been developed to evaluate the multi-frequency point supported design feasibility.The difficult parts to achieve the requirements of the general-purpose design are reasonable device selection and balanced design.With a carefully selected low-noise wide-band RF mixer and amplifier to balance the performance of multi-frequency supported down-conversion,specially designed LO distribution net to increase isolation between adjacent channels,and external band-pass filter to realize expected up-conversion frequencies,high maintenance and modular front-end generalpurpose design has been implemented.Results of standard parameters show an R2 value of at least 99.991%in the range of-60-10 dBm for linearity,up to 18 dBm for P1dB,and up to 89 dBc for cross talk between adjacent channels.The phase noise spectrum is lower than 80 dBc in the range of 0-1 MHz;cumulative phase noise is 0.006°;and amplitude and phase stability are 0.022%and 0.034°,respectively.
文摘In this study, analytical relations for evaluating the exact solution of natural fre- quency and mode shape of beams with embedded shape memory alloy （SMA） wires are presented. Beams are modeled according to Euler-Bernoulli, Timoshenko and third order beam （Reddy） the- ories. A relation is obtained for determining the effect of axial load generated by the recovery action of pre-strained SMA wires. By defining some dimensionless quantities~ the effect of different me- chanical properties on the frequencies and mode shapes of the system are carefully examined. The effect of axial load generated by SMA wires with buckling load and frequency jump is accurately studied.
