Generation of intracavity multi-wavelength and the basic principle of sum-frequency lasers are discused, and the current research status and development of laser diode pumped lasers are introduced in detail.
We demonstrate an all-solid quasi-continuous-wave (QCW) narrow-band source tunable to sodium D2a line at 589.159 nm. The source is based on sum-frequency mixing between lasers at 1064 nm and 1319 nm in a LBO crystal...We demonstrate an all-solid quasi-continuous-wave (QCW) narrow-band source tunable to sodium D2a line at 589.159 nm. The source is based on sum-frequency mixing between lasers at 1064 nm and 1319 nm in a LBO crystal. The 1064 nm and 1319 nm lasers are produced from two diode side-pumped Nd:YAG master oscillator power amplifier (MOPA) laser systems, respectively. A 33 W output of 589 nm laser is obtained with beam quality factor M^2 = 1.25, frequency stability better than ±0.2 GHz and linewidth less than 0.44 GHz. A prototype 589 nm laser system is assembled, and a sodium laser guided star has been successfully observed in the field test.展开更多
The Australian first working sodium guide star laser system has been designed and developed for various astronomical and space-related applications. A completely diode-pumped pulsed system was developed initially foll...The Australian first working sodium guide star laser system has been designed and developed for various astronomical and space-related applications. A completely diode-pumped pulsed system was developed initially followed by a largely fiber-based continuous wave (CW) system operating at 589 nm achieved through a unique wavelength conversion scheme by combining 1342 and 1050 nm through a sum frequency generation process. For the CW system, single-mode laser beams at both 1342 and 1050 nm are achieved from fiber-based seed oscillators and fiber amplifiers. The output power of ~25 W at 1342 nm is achieved from a single frequency fiber Raman amplifier. Output power up to 70 W at 1050 nm is achieved from a Yb-doped fiber pre-amplifier followed by a Yb-doped fiber power amplifier. For the sum frequency generation process, optimum focusing parameters are evaluated and determined. The CW system has generated more than 20 W output power at 589 nm, a circularly polarised beam with a good beam quality, spectral linewidth ≤ 2 MHz, and the laser output locked on the sodium D2 line at 589.159 nm. The system has been successfully demonstrated at EOS Space Research Centre, Mt Stromlo, Canberra, and become the Australian first working sodium guide star laser system.展开更多
We report on frequency doubling of high-energy,high repetition rate ns pulses from a cryogenically gas cooled multi-slab ytterbium-doped yttrium aluminum garnet laser system,Bivoj/DiPOLE,using a type-I phase matched l...We report on frequency doubling of high-energy,high repetition rate ns pulses from a cryogenically gas cooled multi-slab ytterbium-doped yttrium aluminum garnet laser system,Bivoj/DiPOLE,using a type-I phase matched lithium triborate crystal.We achieved conversion to 515 nm with energy of 95 J at repetition rate of 10 Hz and conversion efficiency of 79%.High conversion efficiency was achieved due to successful depolarization compensation of the fundamental input beam.展开更多
The Laboratory for Intense Lasers(L2I) is a research centre in optics and lasers dedicated to experimental research in high intensity laser science and technology and laser plasma interaction. Currently the laboratory...The Laboratory for Intense Lasers(L2I) is a research centre in optics and lasers dedicated to experimental research in high intensity laser science and technology and laser plasma interaction. Currently the laboratory is undergoing an upgrade with the goal of increasing the versatility of the laser systems available to the users, as well as increasing the pulse repetition rate. In this paper we review the current status of the laser research and development programme of this facility, namely the upgraded capability and the recent progress towards the installation of an ultrashort, diode-pumped OPCPA laser system.展开更多
文摘Generation of intracavity multi-wavelength and the basic principle of sum-frequency lasers are discused, and the current research status and development of laser diode pumped lasers are introduced in detail.
文摘We demonstrate an all-solid quasi-continuous-wave (QCW) narrow-band source tunable to sodium D2a line at 589.159 nm. The source is based on sum-frequency mixing between lasers at 1064 nm and 1319 nm in a LBO crystal. The 1064 nm and 1319 nm lasers are produced from two diode side-pumped Nd:YAG master oscillator power amplifier (MOPA) laser systems, respectively. A 33 W output of 589 nm laser is obtained with beam quality factor M^2 = 1.25, frequency stability better than ±0.2 GHz and linewidth less than 0.44 GHz. A prototype 589 nm laser system is assembled, and a sodium laser guided star has been successfully observed in the field test.
文摘The Australian first working sodium guide star laser system has been designed and developed for various astronomical and space-related applications. A completely diode-pumped pulsed system was developed initially followed by a largely fiber-based continuous wave (CW) system operating at 589 nm achieved through a unique wavelength conversion scheme by combining 1342 and 1050 nm through a sum frequency generation process. For the CW system, single-mode laser beams at both 1342 and 1050 nm are achieved from fiber-based seed oscillators and fiber amplifiers. The output power of ~25 W at 1342 nm is achieved from a single frequency fiber Raman amplifier. Output power up to 70 W at 1050 nm is achieved from a Yb-doped fiber pre-amplifier followed by a Yb-doped fiber power amplifier. For the sum frequency generation process, optimum focusing parameters are evaluated and determined. The CW system has generated more than 20 W output power at 589 nm, a circularly polarised beam with a good beam quality, spectral linewidth ≤ 2 MHz, and the laser output locked on the sodium D2 line at 589.159 nm. The system has been successfully demonstrated at EOS Space Research Centre, Mt Stromlo, Canberra, and become the Australian first working sodium guide star laser system.
基金This work was supported by the European Regional Development Fund and the state budget of the Czech Republic project HiLASE CoE(CZ.02.1.01/0.0/0.0/15_006/0000674)the Horizon 2020 Framework Programme(H2020)(739573).
文摘We report on frequency doubling of high-energy,high repetition rate ns pulses from a cryogenically gas cooled multi-slab ytterbium-doped yttrium aluminum garnet laser system,Bivoj/DiPOLE,using a type-I phase matched lithium triborate crystal.We achieved conversion to 515 nm with energy of 95 J at repetition rate of 10 Hz and conversion efficiency of 79%.High conversion efficiency was achieved due to successful depolarization compensation of the fundamental input beam.
基金supported by Fundao para a Ciência e a Tecnologia,Laserlab-Europe(EC’s FP7,grant agreement no.284464)funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053
文摘The Laboratory for Intense Lasers(L2I) is a research centre in optics and lasers dedicated to experimental research in high intensity laser science and technology and laser plasma interaction. Currently the laboratory is undergoing an upgrade with the goal of increasing the versatility of the laser systems available to the users, as well as increasing the pulse repetition rate. In this paper we review the current status of the laser research and development programme of this facility, namely the upgraded capability and the recent progress towards the installation of an ultrashort, diode-pumped OPCPA laser system.