Heavy-fuel engines are widely used in UAVs(Unmanned Autonomous Vehicles)because of their reliability and high-power density.In this study,a combustion model for an in-cylinder direct injection engine has been imple-me...Heavy-fuel engines are widely used in UAVs(Unmanned Autonomous Vehicles)because of their reliability and high-power density.In this study,a combustion model for an in-cylinder direct injection engine has been imple-mented using the AVL FIRE software.The effects of the angle of nozzle inclination on fuel evaporation,mixture distribution,and combustion in the engine cylinder have been systematically studied at 5500 r/min and consider-ing full load cruise conditions.According to the results,as the angle of nozzle inclination increases,the maximum combustion explosion pressure in the cylinderfirst increases and then it decreases.When the angle of nozzle incli-nation is less than 45°,the quality of the mixture in the cylinder and the combustion performance can be improved by increasing the angle.When the angle of nozzle inclination is greater than 45°,however,the mixture unevenness increases slightly with the angle,leading to a deterioration of the combustion performances.When the angle of nozzle inclination is between 35°and 55°,the overall combustion performance of the engine is rela-tively good.When the angle of nozzle inclination is 45°,the combustion chamber’s geometry and the cylinder’s airflow are well matched with the fuel spray,and the mixture quality is the best.Compared with 25°,the peak heat release rate increases by 20%,and the maximum combustion burst pressure increases by 5.5%.展开更多
The fuel-air cloud resulting from an accidental discharge event is normally irregular in shape and varying in concentration. Performance of dispersion simulations using the computational fluid dynamics （CFD）-based t...The fuel-air cloud resulting from an accidental discharge event is normally irregular in shape and varying in concentration. Performance of dispersion simulations using the computational fluid dynamics （CFD）-based tool FLACS can get an uneven and irregular cloud. For the performance of gas explosion study with FLACS, the equivalent stoichiometric fuel-air cloud concept is widely applied to get a representative distribution of explosion loads. The Q9 cloud model that is employed in FLACS is an equivalent fuel-air cloud representation, in which the laminar burning velocity with first order SL and volume expansion ratio are taken into consideration. However, during an explosion in congested areas, the main part of the combustion involves turbulent flame propagation. Hence, to give a more reasonable equivalent fuel-air size, the turbulent burning velocity must be taken into consideration. The paper presents a new equivalent cloud method using the turbulent burning velocity, which is described as a function of SL, deduced from the TNO multi- energy method.展开更多
Experimental analysis was conducted to study the impact of fuel-air mixing and dilution jet on the temperature distribution in a small gas turbine combustor using various optical diagnostic techniques.The strength and...Experimental analysis was conducted to study the impact of fuel-air mixing and dilution jet on the temperature distribution in a small gas turbine combustor using various optical diagnostic techniques.The strength and velocity of the swirler at the venturi exit were adjusted to modify the fuel-air mixture,which is presumed to dominate the heat release of the main combustion zone.Additionally,the dilution hole configuration,including the number and size of the holes,was varied to investigate the dilution effect on outlet temperature distribution.Various optical diagnostic techniques,such as particle image velocimetry,planar Mie scattering,and OH~*chemiluminescence,were used to measure the flow field,fuel spray distribution,and flame structure,respectively.A reduction in swirling strength led to a decrease in the average flow rate in the throat,which improved the structure and symmetry of the axial vortex system in the sleeve,enhanced the mixing of fuel and gas in the dome swirling air,and ultimately,improved the temperature uniformity of the heat release zone.Compared to larger and sparse dilution jets,smaller and dense dilution jets tended to generate hot spots shifted towards the radial middle area.展开更多
为提高燃料空气炸弹(Fuel Air Explosive,FAE)装置爆炸抛撒燃料的极限速度并使速度更加平均,在不改变现有装置整体结构的情况下,采用数值模拟的方法研究起爆方式对FAE装置燃料抛撒径向极限速度的影响。使用有限元分析软件的任意拉格朗日...为提高燃料空气炸弹(Fuel Air Explosive,FAE)装置爆炸抛撒燃料的极限速度并使速度更加平均,在不改变现有装置整体结构的情况下,采用数值模拟的方法研究起爆方式对FAE装置燃料抛撒径向极限速度的影响。使用有限元分析软件的任意拉格朗日-欧拉算法对圆台型FAE装置抛撒燃料进行数值模拟,对比单点起爆、多点起爆和近似线起爆情况下相同位置节点的径向抛撒速度变化情况。研究结果表明,对于燃料上的单元而言,距离较近的起爆点设置会对这个单元上燃料的抛撒运动产生抑制效果,近似线起爆的方式可以使云雾抛撒得更加均匀,为FAE爆炸燃料抛撒数值模拟的进一步细化研究奠定了基础。展开更多
文摘Heavy-fuel engines are widely used in UAVs(Unmanned Autonomous Vehicles)because of their reliability and high-power density.In this study,a combustion model for an in-cylinder direct injection engine has been imple-mented using the AVL FIRE software.The effects of the angle of nozzle inclination on fuel evaporation,mixture distribution,and combustion in the engine cylinder have been systematically studied at 5500 r/min and consider-ing full load cruise conditions.According to the results,as the angle of nozzle inclination increases,the maximum combustion explosion pressure in the cylinderfirst increases and then it decreases.When the angle of nozzle incli-nation is less than 45°,the quality of the mixture in the cylinder and the combustion performance can be improved by increasing the angle.When the angle of nozzle inclination is greater than 45°,however,the mixture unevenness increases slightly with the angle,leading to a deterioration of the combustion performances.When the angle of nozzle inclination is between 35°and 55°,the overall combustion performance of the engine is rela-tively good.When the angle of nozzle inclination is 45°,the combustion chamber’s geometry and the cylinder’s airflow are well matched with the fuel spray,and the mixture quality is the best.Compared with 25°,the peak heat release rate increases by 20%,and the maximum combustion burst pressure increases by 5.5%.
文摘The fuel-air cloud resulting from an accidental discharge event is normally irregular in shape and varying in concentration. Performance of dispersion simulations using the computational fluid dynamics （CFD）-based tool FLACS can get an uneven and irregular cloud. For the performance of gas explosion study with FLACS, the equivalent stoichiometric fuel-air cloud concept is widely applied to get a representative distribution of explosion loads. The Q9 cloud model that is employed in FLACS is an equivalent fuel-air cloud representation, in which the laminar burning velocity with first order SL and volume expansion ratio are taken into consideration. However, during an explosion in congested areas, the main part of the combustion involves turbulent flame propagation. Hence, to give a more reasonable equivalent fuel-air size, the turbulent burning velocity must be taken into consideration. The paper presents a new equivalent cloud method using the turbulent burning velocity, which is described as a function of SL, deduced from the TNO multi- energy method.
基金financially supported by the National Science and Technology Major Project(J2019-Ⅲ-0014-0057)the National Natural Science Foundation of China(92041001)。
文摘Experimental analysis was conducted to study the impact of fuel-air mixing and dilution jet on the temperature distribution in a small gas turbine combustor using various optical diagnostic techniques.The strength and velocity of the swirler at the venturi exit were adjusted to modify the fuel-air mixture,which is presumed to dominate the heat release of the main combustion zone.Additionally,the dilution hole configuration,including the number and size of the holes,was varied to investigate the dilution effect on outlet temperature distribution.Various optical diagnostic techniques,such as particle image velocimetry,planar Mie scattering,and OH~*chemiluminescence,were used to measure the flow field,fuel spray distribution,and flame structure,respectively.A reduction in swirling strength led to a decrease in the average flow rate in the throat,which improved the structure and symmetry of the axial vortex system in the sleeve,enhanced the mixing of fuel and gas in the dome swirling air,and ultimately,improved the temperature uniformity of the heat release zone.Compared to larger and sparse dilution jets,smaller and dense dilution jets tended to generate hot spots shifted towards the radial middle area.
文摘为提高燃料空气炸弹(Fuel Air Explosive,FAE)装置爆炸抛撒燃料的极限速度并使速度更加平均,在不改变现有装置整体结构的情况下,采用数值模拟的方法研究起爆方式对FAE装置燃料抛撒径向极限速度的影响。使用有限元分析软件的任意拉格朗日-欧拉算法对圆台型FAE装置抛撒燃料进行数值模拟,对比单点起爆、多点起爆和近似线起爆情况下相同位置节点的径向抛撒速度变化情况。研究结果表明,对于燃料上的单元而言,距离较近的起爆点设置会对这个单元上燃料的抛撒运动产生抑制效果,近似线起爆的方式可以使云雾抛撒得更加均匀,为FAE爆炸燃料抛撒数值模拟的进一步细化研究奠定了基础。
