Investigation on attitude disturbance control and vibration suppression for fuel-fille flexibl spacecraft

This paper is mainly focused on the attitude dynamics and control of a fuel-filled flexible spacecraft sub- jected to the thermal payload during eclipse transitions. The flexible appendages are considered as Euler-Bernoulli beams, and the sloshing liquid is modeled as in two modes multi-spring-mass models; the governing equations of this coupled system are developed by using Hamilton＇s prin- ciple. Numerical results show that the spacecraft attitude responses consist of a quasi-static displacement and superim- posed vibration. Then, we design an adaptive sliding mode and use the Lyapunov approach control law to control the attitude disturbance and suppress the thermal jitter and liq- uid sloshing for the fuel filled flexible spacecraft subject to the thermal payload. Numerical results are presented to verify the efficiency of the hybrid control methods. The results show that the adaptive sliding mode method might be effective to handle the steady-state errors and the Lyapunov control algo- rithm would suppress the residual vibration.

Enhanced ignition behavior of reactive material projectiles impacting fuel-filled tank

Reactive material projectiles can be an extremely efficient lethality enhancement technology that incorporates the defeat mechanisms of chemical energy and kinetic energy.This paper presents such a research on the enhanced ignition behavior of reactive material projectiles impacting a fuel-filled tank.Firstly,the ignition process description of the fuel-filled tank impacted by inert metal and reactive material projectiles is presented.Secondly,ballistic impact experiments are performed to investigate the ignition effects of the fuel-filled tank impacted by reactive material versus tungsten alloy projectiles with mass matched.The fuel tank used for the experiments is a cylindrical steel casing structure filled with aviation kerosene and sealed with aluminum cover plates on both ends using screw bolts.The experimental results indicate that,compared with impacts from tungsten alloy projectiles,there is dramatically enhanced structural damage to the fuel-filled tank and an enhanced ignition effect caused by reactive material projectile impacts.Finally,an analytical model is developed,by which the effects of the aluminum cover plate thickness on critical structural failure energy of the fuel-filled tank and the total energy of the reactive material projectile deposited into the fuel-filled tank are discussed.The analysis shows a good agreement with the experiments.

Study on plasma expansion model of primary discharge on spacecraft solar array

In the space plasma environment, primary discharge may occur on the solar array and evolve into a destructive sustained arc, which threatens the safe operation of the spacecraft. Based on the plasma expansion fluid theory, a new multicomponent plasma expansion model is proposed in this study, which takes into account the effects of ion species, ion number, initial discharge current, and Low Earth Orbit(LEO) plasma environment. The expansion simulation of single-component and multicomponent ions is carried out respectively, and the variations of plasma number density, expansion distance, and speed during the expansion process are obtained.Compared with the experimental results, the evolution of propagation distance and speed is closed and the error is within a reasonable range, which verifies the validity and rationality of the model. The propagation characteristics of the primary discharge on the solar array surface and the influence of the initial value on the maximum propagation distance and the propagation current peaks are investigated. This study can provide important theoretical support for the propagation and evolution of the primary discharge and the key behavior of the transition to secondary discharge on spacecraft solar array.

Efficient cache replacement framework based on access hotness for spacecraft processors

A notable portion of cachelines in real-world workloads exhibits inner non-uniform access behaviors.However,modern cache management rarely considers this fine-grained feature,which impacts the effective cache capacity of contemporary high-performance spacecraft processors.To harness these non-uniform access behaviors,an efficient cache replacement framework featuring an auxiliary cache specifically designed to retain evicted hot data was proposed.This framework reconstructs the cache replacement policy,facilitating data migration between the main cache and the auxiliary cache.Unlike traditional cacheline-granularity policies,the approach excels at identifying and evicting infrequently used data,thereby optimizing cache utilization.The evaluation shows impressive performance improvement,especially on workloads with irregular access patterns.Benefiting from fine granularity,the proposal achieves superior storage efficiency compared with commonly used cache management schemes,providing a potential optimization opportunity for modern resource-constrained processors,such as spacecraft processors.Furthermore,the framework complements existing modern cache replacement policies and can be seamlessly integrated with minimal modifications,enhancing their overall efficacy.

An impact sensitivity assessment method of spacecraft based on virtual exterior wall

The impact sensitivity assessment of spacecraft is to obtain the probability of spacecraft encountering the OD/M(orbital debris or meteoroid),which is a prerequisite for survivability assessment of on-orbit spacecraft.An impact sensitivity assessment method of spacecraft based on virtual exterior wall was proposed to improve the computational efficiency.This method eliminates determination of the outermost surface elements of the spacecraft before generating the debris rays,which are assumed to originate from a non-concave virtual wall that completely wraps the spacecraft.The Dist Mesh method was adopted for the generating of the virtual wall to ensure its mesh quality.The influences of the sizes,mesh densities,shapes of the virtual wall on the efficiency and accuracy were considered to obtain the best combination of the size and mesh density of the wall and spacecraft.The results of this method were compared with those of S3DE(Survivability of Spacecraft in Space Debris Environment),BUMPER,MDPANTO,ESABASE2/Debris to verify the feasibility of the method.The PCHIP(Piecewise Cubic Hermite Interpolating Polynomial)was used to fit the size vs.flux relationship of the space debris to acquire the impact probability of OD/M with arbitrary size on the spacecraft.

Decoupling Algorithms for the Gravitational Wave Spacecraft

The gravitational wave spacecraft is a complex multi-input multi-output dynamic system.The gravitational wave detection mission requires the spacecraft to achieve single spacecraft with two laser links and high-precision control.Establishing one spacecraftwith two laser links,compared to one spacecraft with a single laser link,requires an upgraded decoupling algorithmfor the link establishment.The decoupling algorithmwe designed reassigns the degrees of freedomand forces in the control loop to ensure sufficient degrees of freedomfor optical axis control.In addressing the distinct dynamic characteristics of different degrees of freedom,a transfer function compensation method is used in the decoupling process to further minimize motion coupling.The open-loop frequency response of the systemis obtained through simulation.The upgraded decoupling algorithms effectively reduce the open-loop frequency response by 30 dB.The transfer function compensation method efficiently suppresses the coupling of low-frequency noise.

Development of Fault Diagnosis System for Spacecraft Based on Fault Tree and G2

Some ideas in the development of fault diagnosis system for spacecraft are introduced. Firstly, the architecture of spacecraft fault diagnosis is proposed hierarchically with four diagnosis frames, i.e., system level, subsystem level, component level and element level. Secondly, a hierarchical diagnosis model is expressed with four layers, i.e., sensors layer, function layer, behavior layer and structure layer. These layers are used to work together to accomplish the fault alarm, diagnosis and localization. Thirdly, a fault-tree-oriented hybrid knowledge representation based on frame and generalized rule and its relevant reasoning strategy is put forward. Finally, a diagnosis case for spacecraft power system is exemplified combining the above with a powerful expert system development tool G2.

基于复杂网络社区检测算法的元器件选用推荐方法

宇航元器件选用是航天任务中的重要环节,空间环境复杂苛刻,对宇航用元器件的可靠性和性能要求极高。传统的元器件选用方法通常依赖于专家经验和单一指标评估,难以全面考虑元器件之间的复杂关联和多维度性能指标。复杂网络理论的发展为元器件选用提供了一种新的思路,特别是社区检测算法,可以帮助识别元器件之间的隐含关系和群体特征,从而优化选用过程,实现宇航元器件精准、快速、高效、灵活的选用。本文介绍了基于复杂网络社区检测算法的元器件选用推荐方法,提出了基于模块度优化的进化算法。该算法引入了基于节点相似度的最大生成树编码方法,还引入了一种生成初始种群的新方法和一种基于正弦的自适应变异函数,并将其用于两个元器件选用网络。该算法有效地检测出了元器件选用网络中的社区结构,实现了元器件的智能选用。

Optimal reorientation of underactuated spacecraft using genetic algorithm with wavelet approximation

The optimal attitude control of an underactuated spacecraft is investigated in this paper. The flywheels of the spacecraft can somehow only provide control inputs in two independent directions. The dynamic equations are formulated for the spacecraft under a nonholonomic constraint resulting from the constant time-rate of the total angular momentum of the system. The reorientation of such underactuated spacecraft is transformed into an optimal control problem. A genetic algorithm is proposed to derive the control laws of the two flywheels angle velocity inputs. The control laws are approximated by the discrete orthogonal wavelets. The numerical simulations indicate that the genetic algorithm with the wavelet approximation is an effective approach to deal with the optimal reorientation of underactuated spacecraft.

Attitude maneuver of liquid-filled spacecraft with a flexible appendage by momentum wheel

Attitude maneuver of liquid-filled spacecraft with an appendage as a cantilever beam by momentum wheel is studied. The dynamic equations are derived by conserva- tion of angular momentum and force equilibrium principle. A feedback control strategy of the momentum wheel is ap- plied for the attitude maneuver. The residual nutation of the spacecraft in maneuver process changes with some chosen parameters, such as steady state time, locations of the liq- uid container and the appendage, and appendage parame- ters. The results indicate that locations in the second and fourth quadrants of the body-fixed coordinate system and the second quadrant of the wall of the main body are better choices for.placing the liquid containers and the appendage than other locations if they can be placed randomly. Higher density and thicker cross section are better for lowering the residual nutation if they can be changed. Light appendage can be modeled as a rigid body, which results in a larger residual nutation than a flexible model though. The resid- ual nutation decreases with increasing absolute value of the initial sloshing angular height.

Chaotic attitude and reorientation maneuver for completely liquid-filled spacecraft with flexible appendage

The present paper investigates the chaotic attitude dynamics and reorientation maneuver for completely viscous liquid-filled spacecraft with flexible appendage. All of the equations of motion are derived by using Lagrangian mechanics and then transformed into a form consisting of an unperturbed part plus perturbed terms so that the system＇s nonlinear characteristics can be exploited in phase space. Emphases are laid on the chaotic attitude dynamics produced from certain sets of physical parameter values of the spacecraft when energy dissipation acts to derive the body from minor to major axis spin. Numerical solutions of these equations show that the attitude dynamics of liquid-filled flexible spacecraft possesses characteristics common to random, non- periodic solutions and chaos, and it is demonstrated that the desired reorientation maneuver is guaranteed by using a pair of thruster impulses. The control strategy for reorientation maneuver is designed and the numerical simulation results are presented for both the uncontrolled and controlled spins transition.

Characteristic Model-based Discrete-time Sliding Mode Control for Spacecraft with Variable Tilt of Flexible Structures

In this paper, the finite-time attitude tracking control problem for the spacecrafts with variable tilt of flexible appendages in the conditions of exogenous disturbances and inertia uncertainties is addressed. First the characteristic modeling method is applied to the problem of the spacecraft modeling. Second, a novel adaptive sliding mode surface is designed based on the characteristic model. Furthermore, a discrete-time sliding mode control (DTSMC) law, which makes the tracking error converge into a predefined bound in finite time, is proposed by employing the parameters of characteristic model associated with the sliding mode surface to provide better performances, robustness, faster response, and higher control precision. The designed DTSMC includes the adaptive control architecture and is chattering-free. Finally, digital simulations of a sun synchronous orbit satellite (SSOS) are presented to illustrate effectiveness of the control strategies as well as to verify the practical feasibility of the rapid maneuver mission. © 2014 Chinese Association of Automation.

Controllability of Spacecraft Attitude and Its Application in Reconfigurability Analysis

We review the controllability research on spacecraft attitude based on nonlinear geometry control theory.The existing studies on attitude controllability are mostly concerning the global controllability and small time local controllability(STLC).A presentation of study methods and connotation in both aspects is briefly carried out.As a necessary condition of reconfigurability,the controllability of the faulty attitude control system is studied.Moreover,two reconfigurability conditions based on controllability results that consider the actuator faults for a pyramid configuration spacecraft are provided.

Analytical method for the attitude stability of partially liquid filled spacecraft with flexible appendage

In this paper, the attitude stability of liquid-filled spacecraft with flexible appendage is investigated. The motion of liquid sloshing is modeled as the spherical pendulum, and the flexible appendage is approached by a linear shearing beam. Nonlinear dynamic equations of the coupled system are derived from the Hamiltonian. The stability of the coupled system was analyzed by using the energy-Casimir method, and the nonlinear stability theorem of the coupled spacecraft system was also obtained. Through numerical computation, the correctness of the proposed theorem is verified and the boundary curves of the stable region are presented. The increase of the angular velocity and flexible attachment length will weaken the attitude stability, and the change of the filled ratio of liquid fuel tank has a different influence on the stability of the coupled spacecraft, depending on the different conditions. The attitude stability analysis of the coupled spacecraft system in this context is useful for selecting appropriate parameters in the complex spacecraft design.

Experimental Study of Vacuum Ultraviolet Radiation Effects and Its Synergistic Effects with Atomic Oxygen on a Spacecraft Material-Polytetrafluoroethylene

Polytetrafluoroethylene (Teflon), a widely used spacecraft material, isstudied to investigate the vacuum ultraviolet (VUV) effects and its synergistic effects with atomicoxygen (AO) in a ground-based simulation facility. The samples before and after the experiments arecompared in appearance, mass, optical properties and surface composition. The reactioncharacteristics of Teflon are summarized and the reaction mechanisms are analyzed. The followingconclusion can be drawn: at the action of VUV the Teflon sample surface is darkened for theaccumulation of carbon; and when the sample is exposed to AO, the carbon is oxidized and thedarkening surface is bleached; the synergistic effects of VUV and AO may cause the erosion of Teflonmore severe.

Orbit Design for Twin-spacecraft Space VLBI

Space Very Long Baseline Interferometry(S-VLBI) is an aperture synthesis technique utilizing an array of radio telescopes including ground telescopes and space orbiting telescopes.It can achieve much higher spatial resolution than that from the ground-only VLBI.In this paper,a new concept of twin spacecraft S-VLBI has been proposed,which utilizes the space-space baselines formed by two satellites to obtain larger and uniform uv coverage without atmospheric influence and hence achieve high quality images with higher angular resolution.The orbit selections of the two satellites are investigated.The imaging performance and actual launch conditions are all taken into account in orbit designing of the twin spacecraft S-VLBI.Three schemes of orbit design using traditional elliptical orbits and circular orbits are presented.These design results can be used for different scientific goals.Furthermore,these designing ideas can provide useful references for the future Chinese millimeter-wave S-VLBI mission.

Corrugation Stuffed Shield for Spacecraft and Its Performance

A corrugation stuffed shield system protecting spacecrafts against meteoroid and orbital debris （M/ OD） is presented. The semi-empirical ballistic limit equations （BLEs）defining the protection capability of the shield system are given, and the shielding performance is also discussed. The corrugation stuffed shield （CKS） is more effective than stuffed Whipple shield for M/OD protection, and its shielding performance will be improved significantly as increasing the impact angle. Orbital debris up to 1 cm in diameter can be shielded effectively as increasing the impact angle to 25° at the corrugated angle of 30°. The results are significant to spacecraft design.

Improved optimal steering law for SGCMG and adaptive attitude control of flexible spacecraft

The issue of attitude maneuver of a flexible spacecraft is investigated with single gimbaled control moment gyroscopes （SGCMGs） as an actuator. To solve the inertia uncertainty of the system, an adaptive attitude control algorithm is designed by applying a radial basis function （RBF） neural network. An improved steering law for SGCMGs is proposed to achieve the optimal out- put torque. It enables the SGCMGs not only to avoid singularity, but also to output more precise torque. In addition, global, uniform, ultimate bounded stability of the attitude control system is proved via the Lyapunov technique. Simulation results demonstrate the effectiveness of the new steering law and the algorithm of attitude maneuver of the flexible spacecraft.

Review：A Survey of Single Gimbal Control Moment Gyroscope forAgile Spacecraft Attitude Control

Agile attitude maneuver is a basic requirement for next generation imaging spacecraft and Control Moment Gyroscope (CMG) is an effective candidate for large space station and agile spacecraft attitude control because of its torque amplification capability. This paper provides a thorough survey of Single Gimbal Control Moment Gyroscope (SGCMG) in terms of configuration,evaluation,modeling,singularity analysis and steering logic,etc. For specific space missions,CMGs are logically mounted into different particular arrays which can be chosen by the proposed evaluation methods. From the dynamic model we find a tough inverse mapping problem which suffers the inherent geometric singularity. Different techniques and theories then are applied for singularity analysis and CMG steering logics design. The pyramid CMG cluster and singular robust logics are proven to be able to enhance the agility of spacecraft. Above work forms a systematic framework of SGCMG for agile spacecraft control with lots of illustrative examples,tables and figures,and will evoke further investigation for future missions.

Marginalized particle filter for spacecraft attitude estimation from vector measurements

An algorithm based on the marginalized particle filters （MPF） is given in details in this paper to solve the spacecraft attitude estimation problem： attitude and gyro bias estimation using the biased gyro and vector observations. In this algorithm, by marginalizing out the state appearing linearly in the spacecraft model, the Kalman filter is associated with each particle in order to reduce the size of the state space and computational burden. The distribution of attitude vector is approximated by a set of particles and estimated using particle filter, while the estimation of gyro bias is obtained for each one of the attitude particles by applying the Kalman filter. The efficiency of this modified MPF estimator is verified through numerical simulation of a fully actuated rigid body. For comparison, unscented Kalman filter （UKF） is also used to gauge the performance of MPE The results presented in this paper clearly derfionstrate that the MPF is superior to UKF in coping with the nonlinear model.