In this study, kerosene fuel-rich gas produced by the combustion in the gas generator was used as the fuel and oxygen-rich air was used as the oxidant to investigate the propagation characteristics of the rotating det...In this study, kerosene fuel-rich gas produced by the combustion in the gas generator was used as the fuel and oxygen-rich air was used as the oxidant to investigate the propagation characteristics of the rotating detonation wave (RDW). The initiation of the kerosene fuel-rich gas and propagation process of the RDW were analyzed. The influences of the oxygen content in the oxidizer, kerosene mass flow rate of the gas generator, and temperature of the kerosene fuel-rich gas on the propagation process of the RDW were studied. The experimental results revealed that the propagation velocity of the RDW could be improved by increasing the three parameters mentioned above with the kerosene mass flow rate as the strongest factor. The minimum oxygen content that could successfully initiate and maintain the stable propagation of the RDW was 32%, achieving the RDW velocity of 1141.9 m/s. The RDW mainly propagated as two-counter rotating waves and a single wave when the equivalent ratios were 0.62–0.79 and 0.85–0.87, respectively. The highest RDW velocity of 1637.2 m/s was obtained when the kerosene mass flow rate, oxygen content, and equivalent ratio were 74.6 g/s, 44%, and 0.87, respectively.展开更多
A design method for a kerosene fuel-rich gas-generator of a liquid rocket engine using turbopumps to supply propellant was performed at a conceptual level. The gas-generator creates hot gases, enabling the turbine to ...A design method for a kerosene fuel-rich gas-generator of a liquid rocket engine using turbopumps to supply propellant was performed at a conceptual level. The gas-generator creates hot gases, enabling the turbine to operate the turbopumps. A chemical non-equilibrium analysis and a droplet vaporization model were used for the estimation of the burnt gas properties and characteristic chamber length. A premixed counter-flow flame analysis was performed for the prediction of the burnt gas properties, namely the temperature, the specific heat ratio and heat capacity, and the chemical reaction time. To predict the vaporization time, the Spalding model, using a single droplet in convective condition, was used. The minimum residence time in the chamber and the characteristic length were calculated by adding the reaction time and the vaporization time. Using the characteristic length, the design methods for the fuel-rich gas-generator were established. Finally, a parametric study was achieved for the effects of the O/F ratio, mass flow rate, chamber pressure, initial droplet temperature, initial droplet diameter and initial droplet velocity.展开更多
文摘In this study, kerosene fuel-rich gas produced by the combustion in the gas generator was used as the fuel and oxygen-rich air was used as the oxidant to investigate the propagation characteristics of the rotating detonation wave (RDW). The initiation of the kerosene fuel-rich gas and propagation process of the RDW were analyzed. The influences of the oxygen content in the oxidizer, kerosene mass flow rate of the gas generator, and temperature of the kerosene fuel-rich gas on the propagation process of the RDW were studied. The experimental results revealed that the propagation velocity of the RDW could be improved by increasing the three parameters mentioned above with the kerosene mass flow rate as the strongest factor. The minimum oxygen content that could successfully initiate and maintain the stable propagation of the RDW was 32%, achieving the RDW velocity of 1141.9 m/s. The RDW mainly propagated as two-counter rotating waves and a single wave when the equivalent ratios were 0.62–0.79 and 0.85–0.87, respectively. The highest RDW velocity of 1637.2 m/s was obtained when the kerosene mass flow rate, oxygen content, and equivalent ratio were 74.6 g/s, 44%, and 0.87, respectively.
基金supported by the Output-oriented Project of the Collaborative Research Program with the Higher Education Partners of the Korea Aerospace Research Institute in 2009
文摘A design method for a kerosene fuel-rich gas-generator of a liquid rocket engine using turbopumps to supply propellant was performed at a conceptual level. The gas-generator creates hot gases, enabling the turbine to operate the turbopumps. A chemical non-equilibrium analysis and a droplet vaporization model were used for the estimation of the burnt gas properties and characteristic chamber length. A premixed counter-flow flame analysis was performed for the prediction of the burnt gas properties, namely the temperature, the specific heat ratio and heat capacity, and the chemical reaction time. To predict the vaporization time, the Spalding model, using a single droplet in convective condition, was used. The minimum residence time in the chamber and the characteristic length were calculated by adding the reaction time and the vaporization time. Using the characteristic length, the design methods for the fuel-rich gas-generator were established. Finally, a parametric study was achieved for the effects of the O/F ratio, mass flow rate, chamber pressure, initial droplet temperature, initial droplet diameter and initial droplet velocity.
