Lactate is a potentially harmful substitute for brain glucose fuel:consequences for metabolic restoration of neurotransmission

The metabolite lactate (L-lactate) can be generated and released by diverse brain cells,including neurons,astrocytes,and oligodendrocytes (Kann,2023;Rae et al.,2024).Lactate production usually requires the degradation of glucose (D-glucose)-and glycogen in astrocytes-to pyruvate by glycolysis and subsequent conversion of pyruvate to lactate by the enzyme lactate dehydrogenase(Figure 1A;Dienel,2019;Rae et al.,2024).

From single to combinatorial therapies in spinal cord injuries for structural and functional restoration

Spinal cord injury results in paralysis, sensory disturbances, sphincter dysfunction, and multiple systemic secondary conditions, most arising from autonomic dysregulation. All this produces profound negative psychosocial implications for affected people, their families, and their communities;the financial costs can be challenging for their families and health institutions. Treatments aimed at restoring the spinal cord after spinal cord injury, which have been tested in animal models or clinical trials, generally seek to counteract one or more of the secondary mechanisms of injury to limit the extent of the initial damage. Most published works on structural/functional restoration in acute and chronic spinal cord injury stages use a single type of treatment: a drug or trophic factor, transplant of a cell type, and implantation of a biomaterial. Despite the significant benefits reported in animal models, when translating these successful therapeutic strategies to humans, the result in clinical trials has been considered of little relevance because the improvement, when present, is usually insufficient. Until now, most studies designed to promote neuroprotection or regeneration at different stages after spinal cord injury have used single treatments. Considering the occurrence of various secondary mechanisms of injury in the acute and sub-acute phases of spinal cord injury, it is reasonable to speculate that more than one therapeutic agent could be required to promote structural and functional restoration of the damaged spinal cord. Treatments that combine several therapeutic agents, targeting different mechanisms of injury, which, when used as a single therapy, have shown some benefits, allow us to assume that they will have synergistic beneficial effects. Thus, this narrative review article aims to summarize current trends in the use of strategies that combine therapeutic agents administered simultaneously or sequentially, seeking structural and functional restoration of the injured spinal cord.

Assessment of ecological geological vulnerability in Mu Us Sandy Land based on GIS and suggestions of ecological protection and restoration

Eco-geological vulnerability assessment is a significant research topic within the field of eco-geology,but it remains poorly studied.The Mu Us Sandy Land,located in the central part of the farming-pastoral ecotone in northern China,plays a critical role in maintaining the ecological security pattern in this region.However,this sandy land also faces severe sandy desertification and ecological degradation.This study conducted a regional eco-geological vulnerability assessment of the Mu Us Sandy Land using a comprehensive index evaluation method based on eco-geological theories and survey results.To construct an appropriate index system for the eco-geological vulnerability assessment of the Mu Us Sandy Land,the study considered the sandy land’s unique characteristics and identified 15 factors of five categories,namely geology,meteorology,soil,topography,and vegetation.The paper calculated the comprehensive weights of all the indices using the analytic hierarchy process(AHP)and the entropy weight method(EWM).Furthermore,it established the eco-geological vulnerability index(EGVI)and obtained the assessment results.The results showed that the eco-geological vulnerability of the Mu Us Sandy Land gradually intensifies from east to west,manifested as vulnerable eco-geological conditions overall.Specifically,extremely vulnerable zones are found in the northwestern and southeastern parts of the study area,highly vulnerable zones in the western and southern parts,moderately vulnerable zones in the central part,and slightly and potentially vulnerable zones in the eastern and southern parts.Areas with high spatial autocorrelations include the northern Uxin Banner-Otog Banner-Angsu Town area,the surrounding areas of Hongdunjie Town in the southeastern part of the study area,the Hongshiqiao Township-Xiaohaotu Township area,Otog Front Banner,and Bainijing Town,which should be prioritized in the ecological conservation and restoration.Additionally,the paper proposed suggestions for the ecological conservation and restoration of county-level administrative areas in the study area.Overall,the findings provide a valuable reference for the ecological conservation and restoration of the Mu Us Sandy Land and other desert areas in arid and semi-arid regions.

Territorial Ecological Restoration with a High-carbon Storage Focus in the Beibu Gulf Urban Agglomeration of China:Insights from Carbon Metabolism Spatial Security Patterns

This study focuses on urgent research on restoring and enhancing carbon storage capacity in the Beibu Gulf Urban Agglomer-ation of China,a key area in the‘Belt and Road’Initiative,which aligns with carbon peaking and neutrality goals.This research ana-lyzes the spatial characteristics of carbon metabolism from 2000 to 2020 and uses models to identify stable carbon sink areas,positive carbon flow corridors,and carbon sequestration nodes.The goal is to construct a carbon metabolism spatial security pattern(CMSSP)and propose territorial ecological restoration strategies under different development demand scenarios.The results show the following:1)in 2020,the study area’s carbon sink decreased by 8.29×10^(4) t C/yr compared with that in 2010 and by 10.83×10^(4) t C/yr compared with that in 2000.High-carbon sinks were found mainly in mountainous areas,whereas low-carbon sinks are concentrated in urban con-struction land,rural residential areas,and land margins.2)From 2000 to 2020,the spatial security pattern of carbon metabolism tended to be‘high in the middle of the east and west and low in the gulf.’In 2000,2010,and 2020,16 stable carbon sinks were identified.The carbon energy flow density in Guangxi was greater than that in Guangdong and Hainan,with positive carbon flow corridors located primarily in Guangxi and Guangdong.The number of carbon sequestration nodes remained stable at approximately 15,mainly in Guangxi and Hainan.3)Scenario simulations revealed that under the Nature-based mild restoration scenario,the carbon sink rate will reach 611.85×10^(4) t C/yr by 2030 and increase to 612.45×10^(4) t C/yr by 2060,with stable carbon sinks increasing to 18.In the restora-tion scenario based on Anti-globalization,the carbon sink will decrease from 610.24×10^(4) t C/yr in 2030 to 605.19×10^(4) t C/yr in 2060,with the disappearance of some positive carbon flow corridors and stable carbon sinks.Under the Human-based sustainable restoration scenario,the carbon sink area will decrease from 607.00×10^(4) t C/yr in 2030 to 596.39×10^(4) t C/yr in 2060,with carbon sink areas frag-menting and positive carbon flow corridors becoming less dense.4)On the basis of the current and predicted CMSSPs,this study ex-plores spatial ecological restoration strategies for high-carbon storage areas in bay urban agglomerations at four levels:the land control region,urban agglomeration structure system,carbon sink structure and bay structure control region.

Papillae alterations around single-implant restorations in the anterior maxillae:thick versus thin mucosa

To evaluate the papilla alterations around single-implant restorations in the anterior maxillae after crown attachment and to study the influence of soft tissue thickness on the papilla fill alteration. According to the inclusion criteria, 32 patients subjected to implant-supported single-tooth restorations in anterior maxillae were included. The patients were assigned to two groups according to the mucosal thickness： （i） group 1, 1.5 mm≤mucosal thickness≤3 mm; and （ii） group 2, 3 mm〈mucosal thickness≤4.5 mm. Assessments of interproximal papillae at the time of crown placement （baseline） and at 6-month postloading （follow-up） were made by two prosthodontists using papilla fill index （PFI）. The mean mucosal thickness was （2.49±0.31） mm （group 1） and （3.81±0.31） mm （group 2） for the two groups respectively. A significant difference in PFI between the groups was detected at the baseline （P〈O.O01）. PFI improvements over time occurred after 6-month follow-up irrespective of the groups. When compared to group 1, the likelihood to obtain papilla fill was significantly higher for group 2 with an odds ratio of 6.05 （P〈O.O01）. The interproximal papilla level around single-implant restorations could improve significantly over time after 6-month restoration according to PFI assessment. The thicker mucosa before implant placement implied a more favorable esthetic outcome in papilla alteration.

Preconditioned Iterative Methods for Algebraic Systems from Multiplicative Half-Quadratic Regularization Image Restorations

Image restoration is often solved by minimizing an energy function consisting of a data-fidelity term and a regularization term.A regularized convex term can usually preserve the image edges well in the restored image.In this paper,we consider a class of convex and edge-preserving regularization functions,i.e.,multiplicative half-quadratic regularizations,and we use the Newton method to solve the correspondingly reduced systems of nonlinear equations.At each Newton iterate,the preconditioned conjugate gradient method,incorporated with a constraint preconditioner,is employed to solve the structured Newton equation that has a symmetric positive definite coefficient matrix. The eigenvalue bounds of the preconditioned matrix are deliberately derived,which can be used to estimate the convergence speed of the preconditioned conjugate gradient method.We use experimental results to demonstrate that this new approach is efficient, and the effect of image restoration is reasonably well.

Assessment of the Quality of Composite Resin Restorations

Purpose: To evaluate the quality of the composite restorations. Material and Methods: A total of 246 composite restorations in 125 patients attending the Conservative Dentistry Clinics at the Faculty of Dentistry, University of Khartoum were examined. Both anterior and posterior composite restorations were included. California Dental Association Quality Evaluation System was used for the evaluation. Results: Fifty two percent of all restorations were found to be satisfactory, while the remaining 48% were not satisfactory. With regard to surface and colour criteria, colour mismatch within the range (34.8%) and slight surface roughness (26.6%) were the most common defects. The most frequent defects of the anatomical form were restoration overhang (26.8%). The majority of the restorations above 4 years old were of unacceptable anatomical form (66.7%), and their marginal integrity was less acceptable than more recent restorations (46.7%). Conclusions: Forty eight percent of the examined composite restorations needed to be replaced, and the unacceptable anatomic form was the main cause of failure of composite restorations.

Stepwise Ecological Restoration:A framework for improving restoration outcomes

Ecosystem degradation is one of the critical constraints for the sustainable development of our planet.However,recovering an ecosystem to a pre-impairment condition is often not practical.The International Restoration Standards provide the first framework for practical guidance on what constitutes the process of ecological repair and how this repair process can be influenced to improve net ecological benefits.In these Standards,Restorative Continuum is highlighted and it recognises that many do not,yet there is still value in aspiring to improvements to the highest extent possible,with some sites potentially being able to be improved in a stepwise manner.Here we elaborate on these Standards by providing a cross-ecosystem theoretical framework of Stepwise Ecological Restoration(STERE)for promoting higher environmental benefits.STERE allows the selection of suitable restorative modes by considering the degree of degradation while encouraging a transition to a higher state.These models include environmental remediation for completely modified and degraded ecosystems,ecological rehabilitation for highly modified and degraded ecosystems,and ecological restoration for degraded native ecosystems.STERE requires selecting tailored restorative modes,setting clear restorative targets and reference ecosystems,applying a systematic-thinking approach,and implementing a continuous monitoring program at all process stages to achieve a resilient trajectory.STERE allows adaptive management in the context of climate change,and when the evidence is available,to“adapt to the future”to ensure climate resilience.The STERE framework could assist in initiating and implementing restoration projects worldwide,especially in developing countries.

Porcelain fracture of metal-ceramic tooth-supported and implant-supported restorations: A review

Metal-ceramic restorations are widely used in dentistry with a high degree of general success. However, fracture of these restorations does occur and usually frustrates both the dentist and the patient. Objective: This literature review discusses the factors that may lead to the fracture of these restorations whether they are tooth-supported or implant-supported with the aim of making dentists and technicians aware of these factors to avoid them. Factors reviewed include: technical factors, dentist-related factors, inherent material properties, direction, magnitude and frequency of applied loads, environmental factors, screw-retained implant-supported restorations, and posterior cantilevered prostheses. Material and Methods: A netbased search in “Pubmed” was performed and combined with a manual search. The search was limited to articles written in English. Conclusions: the published literature revealed that the factors predisposing to fracture of metal-ceramic restorations may be related to the technician, dentist, patient, environment, design of the restoration, or to inherent structure of ceramics and others. However, if the dentist and technician understand these factors and respect the physical characteristics of the materials, most of those are avoidable.

Restoration of the JPEG Maximum Lossy Compressed Face Images with Hourglass Block-GAN

In the context of high compression rates applied to Joint Photographic Experts Group(JPEG)images through lossy compression techniques,image-blocking artifacts may manifest.This necessitates the restoration of the image to its original quality.The challenge lies in regenerating significantly compressed images into a state in which these become identifiable.Therefore,this study focuses on the restoration of JPEG images subjected to substantial degradation caused by maximum lossy compression using Generative Adversarial Networks(GAN).The generator in this network is based on theU-Net architecture.It features a newhourglass structure that preserves the characteristics of the deep layers.In addition,the network incorporates two loss functions to generate natural and high-quality images:Low Frequency(LF)loss and High Frequency(HF)loss.HF loss uses a pretrained VGG-16 network and is configured using a specific layer that best represents features.This can enhance the performance in the high-frequency region.In contrast,LF loss is used to handle the low-frequency region.The two loss functions facilitate the generation of images by the generator,which can mislead the discriminator while accurately generating high-and low-frequency regions.Consequently,by removing the blocking effects frommaximum lossy compressed images,images inwhich identities could be recognized are generated.This study represents a significant improvement over previous research in terms of the image resolution performance.

Using restored two-dimensional X-ray images to reconstruct the three-dimensional magnetopause

Astronomical imaging technologies are basic tools for the exploration of the universe,providing basic data for the research of astronomy and space physics.The Soft X-ray Imager(SXI)carried by the Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)aims to capture two-dimensional(2-D)images of the Earth’s magnetosheath by using soft X-ray imaging.However,the observed 2-D images are affected by many noise factors,destroying the contained information,which is not conducive to the subsequent reconstruction of the three-dimensional(3-D)structure of the magnetopause.The analysis of SXI-simulated observation images shows that such damage cannot be evaluated with traditional restoration models.This makes it difficult to establish the mapping relationship between SXIsimulated observation images and target images by using mathematical models.We propose an image restoration algorithm for SXIsimulated observation images that can recover large-scale structure information on the magnetosphere.The idea is to train a patch estimator by selecting noise–clean patch pairs with the same distribution through the Classification–Expectation Maximization algorithm to achieve the restoration estimation of the SXI-simulated observation image,whose mapping relationship with the target image is established by the patch estimator.The Classification–Expectation Maximization algorithm is used to select multiple patch clusters with the same distribution and then train different patch estimators so as to improve the accuracy of the estimator.Experimental results showed that our image restoration algorithm is superior to other classical image restoration algorithms in the SXI-simulated observation image restoration task,according to the peak signal-to-noise ratio and structural similarity.The restoration results of SXI-simulated observation images are used in the tangent fitting approach and the computed tomography approach toward magnetospheric reconstruction techniques,significantly improving the reconstruction results.Hence,the proposed technology may be feasible for processing SXI-simulated observation images.

^(99m)Tc in the evaluation of microleakage of composite resin restorations with SonicFill^(TM).An in vitro experimental model

Introduction: The composite SonicFillTM (Kerr/Kavo) is indicated for posterior restorations, with a single increment up to 5 mm due to reduced polymerization shrinkage, thus reducing working time. Aim: Evaluation of marginal microleakage with SonicFillTM. Method and Materials: There were sectioned sixty noncarious human molars in the occluso-cervical direction. Class V cavities were prepared on each tooth with gingival margin walls in a standardized way. The specimens were divided into 4 groups: group 1—restored with SonicFillTM (Kerr/Kavo), group 2—restored with FiltekTM SupremeXTE (3M ESPE), group 3—the cavities were not restored;group 4—restored with SonicFillTM (Kerr/Kavo). In groups 1, 2 and 4 the enamel was conditioned with 37% orthophosphoric acid and applied the self-etch adhesive system Clear- fillTM SE BOND (Kuraray). The specimens were stored in distilled water at 37?C for 7 days. After, the specimens, were immersed in a solution of 99mTc-Pertechnetate and the radioactivity was assessed with a gamma camera. The nonparametric Kruskal-Wallis and Mann-Whitney test with Bonferroni correction at a significance level of 5% were used for the statistical analyses. Results: There are significant differences between the positive and negative control groups and between these and experimental groups (p TM and FiltekTM SupremeXTE. Conclusion: The new composite SonicFillTM and FiltekTM SupremeXTE showed no difference concerning dye penetration. The Sonic- FillTM restorative system showed no influence in concerning microleakage.

Ecological problems and ecological restoration zoning of the Aral Sea

The Aral Sea was the fourth largest lake in the world but it has shrunk dramatically as a result of irrational human activities, triggering the "Aral Sea ecological crisis". The ecological problems of the Aral Sea have attracted widespread attention, and the alleviation of the Aral Sea ecological crisis has reached a consensus among the five Central Asian countries(Kazakhstan, Uzbekistan, Tajikistan, Kyrgyzstan, and Turkmenistan). In the past decades, many ecological management measures have been implemented for the ecological restoration of the Aral Sea. However, due to the lack of regional planning and zoning, the results are not ideal. In this study, we mapped the ecological zoning of the Aral Sea from the perspective of ecological restoration based on soil type, soil salinity, surface water, groundwater table, Normalized Difference Vegetation Index(NDVI), land cover, and aerosol optical depth(AOD) data. Soil salinization and salt dust are the most prominent ecological problems in the Aral Sea. We divided the Aral Sea into 7 first-level ecological restoration subregions(North Aral Sea catchment area in the downstream of the Syr Darya River(Subregion Ⅰ);artificial flood overflow area in the downstream of the Aral Sea(Subregion Ⅱ);physical/chemical remediation area of the salt dust source area in the eastern part of the South Aral Sea(Subregion Ⅲ);physical/chemical remediation area of severe salinization in the central part of the South Aral Sea(Subregion Ⅳ);existing water surface and potential restoration area of the South Aral Sea(Subregion Ⅴ);Aral Sea vegetation natural recovery area(Subregion Ⅵ);and vegetation planting area with slight salinization in the South Aral Sea(Subregion Ⅶ)) and 14 second-level ecological restoration subregions according to the ecological zoning principles. Implementable measures are proposed for each ecological restoration subregion. For Subregion Ⅰ and Subregion Ⅱ with lower elevations, artificial flooding should be carried out to restore the surface of the Aral Sea. Subregion Ⅲ and Subregion Ⅳ have severe salinization, making it difficult for vegetation to grow. In these subregions, it is recommended to cover and pave the areas with green biomatrix coverings and environmentally sustainable bonding materials. In Subregion Ⅴ located in the central and western parts of the South Aral Sea, surface water recharge should be increased to ensure that this subregion can maintain normal water levels. In Subregion Ⅵ and Subregion Ⅶ where natural conditions are suitable for vegetation growth, measures such as afforestation and buffer zones should be implemented to protect vegetation. This study could provide a reference basis for future comprehensive ecological management and restoration of the Aral Sea.

Periodontal Health among Type 2 Diabetes Patients Treated with Different Dental Restorations

Background: Diabetes increases periodontal disease risk and its complications, which are worsened with age or faulty restorations. Aim: Evaluate periodontal health among patients with diabetes treated with different dental restorations. Materials and Methods: This comparative cross-sectional study was conducted at the faculty of dentistry, Najran University, KSA, from March 2018 to February 2020. It included 260 diabetics, treated with different dental restorations, divided into four groups, each comprising 65 patients aged 45 - 60 years: Group 1 (G1), no restorations (control group);Group 2 (G2), Class II amalgam restorations;Group 3 (G3), Class II composite resin restorations;and Group 4 (G4), three-unit posterior metal ceramic prostheses. The Ages of all restorations ranged from 8 to 10 years. All groups were assessed for the Plaque Index (PI) and Gingival Index (GI), Overhangs Rate (OR), Alveolar Bone Loss (ABL) (the latter two using panoramic X-ray). HbA1c and duration of participants were also assessed and compared. Results: The mean HbA1c results of the groups ranged from 8.1% to 9.5%, and their mean diabetes durations ranged from 7.2 to 12 years. All the groups showed worse periodontal scores, ranging from 2.45 - 2.95 for PI and 2.25 - 2.8 for GI. G2 had higher scores than G1 and G3 (p < 0.001). G4 had the highest two recorded scores (p < 0.001). G2 had a higher rate of overhangs than G3 (p < 0.037). The mean ABL was 44% (SD 6.4) for G1, 56.0% (SD 6.7) for G2, 46.5% (SD 5.8) for G3, and 74.5% (SD 6.4) for G4. The lowest values were recorded in G1 and G3 (p = 0.987). The highest value was observed in G4, which was significantly higher than other groups (p < 0.001). Conclusion: The worse periodontal parameters among subjects treated with either three-unit metal ceramic or Class II amalgam restorations indicated severe periodontal destruction. Untreated subjects and subjects treated with Class II composite resin had relatively better periodontal status.

Insightful Understanding of the Role of the Mechanical Properties in Defining the Reliability of All-Ceramic Dental Restorations: A Review

Since the last two decades, restorative dentistry has been witnessing an increased acceptance of the use of the well-known all-ceramic materials for the fabrication of single dental restorations, such as inlays, onlays, crowns, anterior and posterior fixed partial dentures (PFPDs). These restorations certainly offer the potential for better biocompatibility coupled with superior aesthetic qualities, especially when compared with the conventional prostheses made from porcelain that is fused with metal ceramic restorations. However, brittleness and extreme sensitivity of all-ceramic materials to micro-like defects or cracks that are inherently present, or may grow, in their microstructure during different laboratory fabrication steps, during necessary clinical adjustments, or from post-placement chewing activity, remain major shortcomings of these dental restorations. In fact, many researchers are of the opinion that the improved mechanical properties can significantly improve the lifetime of all-ceramic restorations and result in enhanced reliability. Therefore, efforts of researchers, as well as manufacturers, have been directed towards the improvement of the mechanical properties in order to overcome such limitations. This article reviews the characterization of the most important mechanical properties that can delineate the behavior of all-ceramic dental materials upon loading. These include fracture mechanics, the brittle nature of ceramics, the relationship between microstructural features and fracture behavior, sources of cracks and flaws that may initiate a fracture and the effect of different fabrication procedures and/or clinical adjustments on the mechanical behavior of dental ceramics are also reviewed and discussed.

Twelve-month evaluation of the atraumatic restorative treatment approach for class Ⅲ restorations:An interventional study

BACKGROUND Atraumatic restorative treatment(ART)may be appropriate for populations without accessibility and affordability.More data are required regarding the success rate of ART in anterior teeth.AIM To evaluate the clinical performance of restoring class III cavities in anterior teeth of permanent dentition using the ART approach.METHODS A longitudinal interventional field study was carried out at two rural primary health centers,Tumkur district,India.A total of 54 teeth in 39 patients were evaluated for the survival rate of class III restorations in permanent anterior teeth using the ART approach in children and adult populations.Evaluation of ART restoration was carried out using Frencken J criteria,the mean procedure time,patient acceptance and reported pain severity during the ART approach were evaluated using a visual analog scale.Calculation of the cost of ART was also performed.RESULTS The mean time taken to perform the ART procedure was 14.79±5.8 min with the majority of patients reporting only mild pain.At 6 mo follow-up,72.2%remained in a good state,but this reduced to 27%at 12 mo.The cumulative survival rate of the restorations was 94.4%at 6 mo and 80.9%at 12 mo follow-up.Estimation of the direct cost for a single class III restoration was 186.50 INR(2.64 USD).CONCLUSION ART may be a good comprehensive option for basic oral health care for underserved or inaccessible populations,and preventive care for patients.

Total hip arthroplasty for sequelae of childhood hip disorders:Current review of management to achieve hip centre restoration

Adults requiring total hip arthroplasty(THA)for childhood disorder sequelae present with shortening,limp,pain,and altered gait.THA,which can be particularly challenging due to altered anatomy,requires careful planning,assessment,and computed tomography evaluation.Preoperative templating is essential to establish the appropriate acetabular and femoral size.Information regarding neck length and offset is needed to ensure the proper options are available at THA.Hip centre restoration must be planned preoperatively and achieved intraoperatively with appropriate exposure,identification,and stable fixation with optimum-size components.Identifying the actual acetabular floor is essential as changes include altered anatomy,distortion of the margins and version changes.Proximal femur changes include anatomical variation,decreased canal diameter,cortical thickness,changes in anteversion,and metaphyseal and diaphyseal mismatch.Preoperative assessment should consist of limb assessment for variations due to prior surgical procedures.Evaluation of the shortening pattern with the relationship of the lesser trochanter to the teardrop would help identify and plan for subtrochanteric shortening osteotomy,especially in high-riding hips.The surgical approach must ensure adequate exposure and soft tissue release to achieve restoration of the anatomical hip centre.The femoral components may require modularity to enable restoration of anteversion and optimum fixation.

Effect of Nanoparticles Reinforced Adhesive Layers on Microleakage of Tooth Restorations

Adhesive layer is an essential part of tooth colored restorations which play an important role in decreasing the microleakage between the tooth and restoration material after polymerization shrinkage. The purpose of this study was to evaluate the effect of deferent adhesive system of bonding agent on microleakage of nanocomposite resin in class II cavities. Two different types of adhesive systems: universal adhesive (ExciTE) and a newly developed adhesive (Nano-Bond) and one type of light-cured resin restorative material (nanocomposite resin) were used in this study. These adhesives were applied to prepared tooth cavities by either manufactures’ instructions or by an experimental method (single or double application). Nanocomposite resin was then placed and light-cured for 40 seconds. Teeth were subjected to 500 thermal cycles between 5&degC and 55&degC and were immersed in 3% methylene blue solution for 24 hours;microleakage was observed microscopically. The data were analyzed by a two-way ANOVA. For comparison between groups, Tukey’s post-hoc test was used. Nanoparticles reinforced adhesive system shows low microleakage in compare with universal adhesive system, and application of two adhesive layers also can decrease the microleakage. The ability of stress absorption by adhesive layer after polymerization shrinkage of restoration material will reduce the microleakage.

Restoration or Rehabilitation of the Faleme River Affected by Mining Activities: What Methods?

The Faleme River, a West Africa long transboundary stream (625 km) and abundant flow (>1100 million m3) is affected by severe erosion because of mining activities that takes place throughout the riverbed. To preserve this important watercourse and ensure the sustainability of its services, selecting and implementing appropriates restorations techniques is vital. In this context, the purpose of this paper was to present an overview of the actions and techniques that can be implemented for the restoration/rehabilitation of the Faleme. The methodological approach includes field investigation, water sampling, literature review with cases studies and SWOT analysis of the four methods presented: river dredging, constructed wetlands, floating treatment wetlands and chemical precipitation (coagulation and flocculation). The study confirmed the pollution of the river by suspended solids (TSS > 1100 mg/L) and heavy metals such as iron, zinc, aluminium, and arsenic. For the restoration methods, it was illustrated through description of their mode of operation and through some case studies presented, that all the four methods have proven their effectiveness in treating rivers but have differences in their costs, their sustainability (detrimental to living organisms or causing a second pollution) and social acceptance. They also have weaknesses and issues that must be addressed to ensure success of rehabilitation. For the case of the Faleme river, after analysis, floating treatment wetlands are highly recommended for their low cost, good removal efficiency if the vulnerability of the raft and buoyancy to strong waves and flow is under control.

Phytoremediation Strategies for Heavy Metal Contamination: A Review on Sustainable Approach for Environmental Restoration

Current globalization trends and important breakthroughs globally need a complete study of heavy metal contamination, its causes, its impacts on human and environmental health, and different remediation strategies. Heavy metal pollution is mostly produced by urbanization and industry, which threatens ecosystems and human health. Herein, we discuss a sustainable environmental restoration strategy employing phytoremediation for heavy metal pollution, the carcinogenic, mutagenic, and cytotoxic effects of heavy metals such as cadmium, copper, mercury, selenium, zinc, arsenic, chromium, lead, nickel, and silver, which may be fatal. Phytoremediation, which was prioritized, uses plants to remove, accumulate, and depollute pollutants. This eco-friendly method may safely collect, accumulate, and detoxify toxins using plants, making it popular. This study covers phytostabilization, phytodegradation, rhizodegradation, phytoextraction, phytovolatilization, and rhizofiltration. A phytoremediation process’s efficiency in varied environmental circumstances depends on these components’ complex interplay. This paper also introduces developing phytoremediation approaches including microbe-assisted, chemical-assisted, and organic or bio-char use. These advancements attempt to overcome conventional phytoremediation’s limitations, such as limited suitable plant species, location problems, and sluggish remediation. Current research includes machine learning techniques and computer modeling, biostimulation, genetic engineering, bioaugmentation, and hybrid remediation. These front-line solutions show that phytoremediation research is developing towards transdisciplinary efficiency enhancement. We acknowledge phytoremediation’s promise but also its drawbacks, such as site-specific variables, biomass buildup, and sluggish remediation, as well as ongoing research to address them. In conclusion, heavy metal pollution threatens the ecology and public health and must be reduced. Phytoremediation treats heavy metal pollution in different ways. Over time, phytoremediation systems have developed unique ways that improve efficiency. Despite difficulties like site-specificity, sluggish remediation, and biomass buildup potential, phytoremediation is still a vital tool for environmental sustainability.