To clarify the importance of various influencing factors on asphalt pavement rutting deformation and determine a screening method of model indicators,the data of the RIOHTrack full-scale track were examined using the ...To clarify the importance of various influencing factors on asphalt pavement rutting deformation and determine a screening method of model indicators,the data of the RIOHTrack full-scale track were examined using the factor analysis method(FAM).Taking the standard test pavement structure of RIOHTrack as an example,four rutting influencing factors from different aspects were determined through statistical analysis.Furthermore,the common influencing factors among the rutting influencing factors were studied based on FAM.Results show that the common factor can well characterize accumulative ESALs,center-point deflection,and temperature,besides humidity,which indicates that these three influencing factors can have an important impact on rutting.Moreover,an empirical rutting prediction model was established based on the selected influencing factors,which proved to exhibit high prediction accuracy.These analysis results demonstrate that the FAM is an effective screening method for rutting prediction model indicators,which provides a reference for the selection of independent model indicators in other rutting prediction model research when used in other areas and is of great significance for the prediction and control of rutting distress.展开更多
This paper proposes a new technique which introduces the high-order single-step-β method(HSM)into the experimental study on the substructure pseudo-dynamic testing(SPDT).The technique is based on the proposed concept...This paper proposes a new technique which introduces the high-order single-step-β method(HSM)into the experimental study on the substructure pseudo-dynamic testing(SPDT).The technique is based on the proposed concept of equivalent shear stiffness which can meet the requirement of the HSM algorithm.A study is done to theoretically validate the technique by the numerical analysis of two-storey shear building structure,in comparison of the proposed substructure pseudo-dynamic testing algorithm with the central difference method(CDM).Then,a full-scale SPDT model,the three-storey frame-supported reinforced concrete short-limb masonry shear wall structure,is designed and tested to simulate the seismic response of the corresponding six-storey structure and verify the proposed force control HSM technique.Meanwhile,the techniques of both stiffness correction and force control are suggested to control algorithmic error,control error and measurement error.The results indicate that the force control HSM can be used in the full-scale multi-degree-of-freedom(MDOF)substructure pseudo-dynamic testing before descent segment of structure restoring force properties.展开更多
基金The National Key Research and Development Program of China(No.2018YFB1600300,2018YFB1600304,2018YFB1600305)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX21_0133)the Scientific Research Foundation of Graduate School of Southeast University.
文摘To clarify the importance of various influencing factors on asphalt pavement rutting deformation and determine a screening method of model indicators,the data of the RIOHTrack full-scale track were examined using the factor analysis method(FAM).Taking the standard test pavement structure of RIOHTrack as an example,four rutting influencing factors from different aspects were determined through statistical analysis.Furthermore,the common influencing factors among the rutting influencing factors were studied based on FAM.Results show that the common factor can well characterize accumulative ESALs,center-point deflection,and temperature,besides humidity,which indicates that these three influencing factors can have an important impact on rutting.Moreover,an empirical rutting prediction model was established based on the selected influencing factors,which proved to exhibit high prediction accuracy.These analysis results demonstrate that the FAM is an effective screening method for rutting prediction model indicators,which provides a reference for the selection of independent model indicators in other rutting prediction model research when used in other areas and is of great significance for the prediction and control of rutting distress.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50508012)
文摘This paper proposes a new technique which introduces the high-order single-step-β method(HSM)into the experimental study on the substructure pseudo-dynamic testing(SPDT).The technique is based on the proposed concept of equivalent shear stiffness which can meet the requirement of the HSM algorithm.A study is done to theoretically validate the technique by the numerical analysis of two-storey shear building structure,in comparison of the proposed substructure pseudo-dynamic testing algorithm with the central difference method(CDM).Then,a full-scale SPDT model,the three-storey frame-supported reinforced concrete short-limb masonry shear wall structure,is designed and tested to simulate the seismic response of the corresponding six-storey structure and verify the proposed force control HSM technique.Meanwhile,the techniques of both stiffness correction and force control are suggested to control algorithmic error,control error and measurement error.The results indicate that the force control HSM can be used in the full-scale multi-degree-of-freedom(MDOF)substructure pseudo-dynamic testing before descent segment of structure restoring force properties.
