Compilation and Analysis Method for Computer Aided Pattern Design System Based on Fully-Fashioned Computerized Flat Knitting Machine

The knitting industry CAD/CAM system's development needs a solution of computer representation of the designed objects.One of them is a transformation of knitting rows and stitches form knitting pattern and its automatic analysis is to control data from the knitting design data.A method of the pattern CAD system including the analyzing and the compiling of the pattern data was developed in this paper.By rasterizing the pattern map,the drafted pattern could be compiled into knitting row data and stitches.The storage format of knitting rows data and stitches data could be defined by analyzing the motion of computerized fiat knitting machine.By reassembling the control data,it could be analyzed into the execute data of the controller in computerized flat knitting machine.This method mainly focused on the weak areas of multi-needle-bed technology and fully-fashioned knitting technology in inland and could be applied to most of control systems in the master-slave mode.The knitting row data and pattern row data in a " *.ptn" format file were integrated.Giving a corresponding analytic calculation process of control data and realizing independent development of the upper machine and the lower machine,the final knitting control data not only have low computation and transmission cost but also have fast transfer speeds.

Study of Single Plated Principle on Large Diameter Circular Weft Knitting Machine

A new theory and method that differs from the tradition-al single plated weft - knitting theory and method hasbeen expounded after theoretical analyzing and experi-mental proving. If the new method is used when platingstitch is knitted on large diameter weft knitting machine,the thorny problem of long standing that ground yarn iseasy to appear on the face side of fabric is solved. Thenew method, i.e, the production of physical ability oftraining uniform for serviceman has been used.

OPTIMAL SETTING-UP OF KNITTING ELEMENTS AND ITS EFFECT ON TENSION VARIATION

The dynamic yarn tension variations during knitting cycle are very difficult to control and be-come one of barriers to knitting on modern warp knitting machine.Examination of experimentaldata and theoretical analysis show that the relative position of spring rail to knitting elements suchas needle,guide as well as their displacement has noticeable effect on tension variation so that theknitting condition can be much improved by rearrangement of the knitting elements and theirmovement within a knitting cycle.

3D Modeling and Simulation of Fancy Fabrics in Weft Knitting

Weft knitted fancy fabrics are widely used in knitted garment design. Due to the complexity of the structures, their modeling and simulation needs to be solved in three-dimensional (3D) CAD developments. In this paper, 3D loop geometrical models of weft knitted fancy structures, including tuck stitch, jacquard stitch, transfer stitch and fleecy stitch, were developed based on an improved model of plain loop, and their central axes as some 3D space curves were achieved by using Non-Uniform Rational B-Splines (NURBS). The 3D visual simulation programme was written in C++ programming language using OpenGL, which was a function library of 3D graphics. Some examples of weft knitted fancy fabrics were generated and practical application of 3D simulation was discussed.

Effect of Knitting Process on Elastic Property of Polyethylene Terephthalate (PET)/Polybutylene Terephthalate (PBT) Warp Knitted Fabric

This study investigated the elastic elongation and elastic recovery of the elastic warp knitted fabric made of polyethylene terephthalate( PET) and polybutylene terephthalate( PBT)filament. The effect of knitting parameter on the elasticity of PBT /PET warp knitted fabric was analyzed. The increase of drawing density( from 16 to 26 courses per centimeter( CPC)) on machine resulted in the decrease of elongation at the weft direction. But,the elongation at the warp direction fluctuated as drawing density increasing. The yarn run-in speed influenced the elongation of PET /PBT warp knitted fabric as well. When the yarn run-in speed of GB1( front bar) was kept a constant,the increase of GB2( back bar) yarn run-in speed caused the gradual enhancement of the elastic elongation at the warp direction,but the different trends of the elastic elongation at the weft direction. When yarn run-in speed of GB2 was kept a constant,the increase of GB1 yarn run-in speed enlarged the elastic warp elongation from 104.16 to 124.97 mm,while the weft elongation decreased from 110.34 to 98.03 mm.Eventually yarn run-in speeds of GB1 and GB2 were retained at1 360 and 1 170 mm / rack respectively under 20 CPC drawing density. It could not only balance the two directions of elongation but also reach the highest elongation at both directions( 126. 32 and115.88 mm) under 100 N tension. These results provide a better understanding of characteristics of PET / PBT warp knitted fabric,and its elastic elongation and recovery behavior for development and effective applications.

Study of the Effect of Changes on the Technological and Physical-Mechanical Properties of Knitting in a New Structure

In this article, we compared four types of knitted fabrics with high two-ply shape retention. Experimental samples of a two-layer knitted fabric have been developed and graphic symbols have been applied on a flat-needle weaving machine of the 12th class LONG-XING SM 252 (China).

ON CRAFT OF SILK “KNITTING” CORDS OF WARRING STATES PERIOD IN JIANGLING

Seven pieces of silk braids excavated from Chu Tomb No.1 at M ashan in Jiangling are thoughtto belong to the knitting fabric.Their structures are double-stitched type,with a lining silk on theback side to fix the knitted threads;besides the traverse linking structure,there are alsomulti-structures by single jersey combined with traverse linking,the excavators declared.The au-thor of this paper believes that those cords can be classified as some intermediary between theknitwear and the needlework.They have the structure similar to certain kinds of knitting,crochetand embroidery,and can be duplicated through two different methods.The differences and similar-ities between these cords and the traditional hand-knitting or embroidery,as well as their originsare discussed.Photographs of the relic and the duplication are presented.

Knitting and Finishing of Ramie Knitted Fabrics Blended with Fine Polyester

Ramie fibre is harsh and rigid. Ramie yarns have a hairy feel and reduced cohesion. A considerable amount of research has been done to ease the undesirable properties of ramie products through modifying conditions of knitting and finishing according to the special properties of the ramie yarn. From the comparison results, burning the hairiness is shown as one of the effective methods to improve the properties of the yarn. A typical finishing condition with enzyme treatment is also recommended.

Design of Flexible Electronic Shogging System for High-Speed Warp-Knitting Machine

A flexible electronic shogging system was presented based on rotary type servo motor,which aimed to improve the dynamic response of the shogging drive and decrease the impact of the guide bar during the higher speed running of warp-knitting machine.In this system,the speed control mode,faster response servo motor,no-flat modified trapezoid motion law,and its electronic cam were chosen;the realization standard and method were also introduced in details.The speed response curves of loaded motor indicated that the system could satisfy the technology requirements of high-speed warpknitting machine which run at the speed of 1000 r/min in the experiments,and the vibration curves showed that the guide bar had weaker mechanical impact and higher dynamic response characteristics.The results indicated that the flexible electronic shogging system designed following the previous step was successful,and the design principle of the electronic shogging was testified validly.

STATISTICAL ANALYSIS OF YARN APPEARANCE IN SINGLE PLATED WORK KNITTED ON LARGE DIAMETER CIRCULAR WEFT KNITTING MACHINE

In this paper the significance analysis has been made of the factors influencing the yarn appearing of single plated weft-knit fabrics knitted on large diameter machine by a mathematical statistical method. By means of orthogonal test and variance analysis, it is known that the feeding tension is the significant factor influencing the yarn appearance and the ground yarn tension should be larger than the face yarn tension. Through comparison, it is also known that the drawing off force should be regulated suitably, the carrier should be near the first closed needle, and the sinker should be out late slightly.

Performance of Flexible Warp Knitting Metal Mesh with Notch

Three different kinds of notch involving single edge notch （ SEN）, double edge notch （ DEN ） and central notch （ CEN ） were preset in flexible warp knitting metal mesh, and the tensile properties of notch samples were tested. Three kinds of notch samples＇ sensitivity were investigated through different notch lengths. Then failure process and tensile properties were contrasted and analyzed between intact and notch samples. Experiment and analysis results showed that positive Poisson＇s ratio effect gave rise to obvious waist binding and special inverted triangle loading area. All samples were sensitive to three kinds of notches. And notch sensitivity was closely related to notch form and notch length. The notch procession obviously deteriorated the mechanical properties of flexible warp knitting metal mesh. Sample with different notch lengths and breakage locations determined different tensile strengths that sample could bear. The fitting function of waist binding track satisfied the parabolic equation.

Panda Brand Series Knitting Machines

The Panda brand series knitting machines is produced by the Nanjing Changhong Machine General Plant, a special factory designated by the state to manufacture knitting machines for making woollen knitwear. The plant has imported a complete set of

Shandong Jining Knitting Mill

The Shandong Jining Knitting Mill was established in 1958. Since it began cooperating with two Hongkong companies in 1991, it has developed into an all-round knitting enterprise for knitting cotton, wool, and synthetic fibre clothing. It also employs mercerizing and singeing technology. The mill has an annual output

Research of Copper Foam Prepared by Forming-Knitting and Infiltration

Using forming-knitting technology and organic materials, copper foam with high porosity (>80%) and open-pore structure was successfully prepared. According to the method of immersion, the technical characteristics of metal paste performance and influence factors of sinter process were discussed. The pore morphology and compressibility of copper foam were detected simultaneously, and the structural property of copper foam prepared by the process of once-infiltrating was compared with the one of copper foam prepared by the process of twice-infiltrating. The results show that pH value of metal paste has a large influence on rheological properties of slurry. By twice-infiltrating process, the microstructure of copper foam was altered. In case of the porosity dropping indistinctly, the compression stress of copper foam platform was raised from 0.5 MPa to 1 Mpa which was of great significance to improve the energy absorption capacity of the material.

Knitting Industry:Economic Growth and Trade Fair

Generally speaking, everything has its own plan or target for the whole year. Half year gone, we need to review what was done in the past, and reshape what is to be structured in the second half. According to the statistics, economy in knitting industry shows the growth tendency in production, investment and export in the first half year. In order to reach a better level for the second half year, driving consumption through business initiatives and trade platforms is an indispensable step. China International Knitting Trade Fair in August Shanghai will be seen as the best knitting business platform to drive the industry to grow in the desired direction.

Positions of Guide Eyes in Circular Warp Knitting Machines

The special lapping requirements were pointed out and the safe range to fix the guide eyes on the circular guide unit was determined by means of Locus Formulas of Warp sections in lapping movement, which were carried out on installing prototype machine. Based on the calculations of the force components acting on lapping points, the positions of the guide eyes in chain overlapping could be used to determine the safe range that could meet the requirements for tricot overlapping. The safe range can ensure the successful lapping and the multi-guide unit designing in circular warp-knitting machines.

China Knitting 2008 on the Way

The year of 2007 witnessed a fairly good economic performance in textile industry as a whole,resulting in industrial output value for 3080 billion yuan in the middle and big enterprises. The textiles and apparel export came up to $171.7 billion,18.86% up as against 2006. With this setting,the knitting industry in China also kept a growth momentum in 2007. From Jan.

Studying the Effect of Polyester Fiber Blend Ratio and Pilling Cycle on Blended Knit Fabrics

Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester fiber blend ratio as well as the different pilling cycles on blended fabrics. The cotton, polyester, and elastane prepared the study fabrics. These fabrics are (90% Cotton/5% Polyester/5% Elastane, 90% Cotton/6% Polyester/4% Elastane, 90% Cotton/7% Polyester/3% Elastane, 90% Cotton/8% Polyester/2% Elastane, and 90% Cotton/9% Polyester/1% Elastane, 85% Cotton/10% Polyester/5% Elastane, 85% Cotton/11% Polyester/4% Elastane, 85% Cotton/12% Polyester/3% Elastane, 85% Cotton/13% Polyester/2% Elastane, and 85% Cotton/ 14% Polyester/1% Elastane, 80% Cotton/15% Polyester/5% Elastane, 80% Cotton/16% Polyester/4% Elastane, 80% Cotton/17% Polyester/3% Elastane, 80% Cotton/18% Polyester/2% Elastane, and 80% Cotton/19% Polyester/1% Elastane). The selected polyester blend ratios were 5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%, 13%, 14%, 15%, 16%, 17%, 18% and 19% respectively. The study used the Martindale pilling tester with 2000, 5000, and 7000 cycles, respectively. The evaluation followed the ISO 12945-2:2000. The study findings are that the polyester fiber blend ratio did not influence the pilling grade on blended fabrics for pilling cycles 2000, and the pilling grade remained constant at 4 - 5. The pilling grade started to deteriorate in pilling cycle 5000 for the fabrics 85%C/10%P/5%E, 85%C/11%P/4%E, 85%C/12%P/3%E, 85%C/ 13%P/2%E, 85%C/14%P/1%E showed the pilling grade 4, and the fabrics made from 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 4, 3, 3, 3, and 3 respectively. For the pilling cycles 7000, the pilling grade further deteriorated for the fabrics 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 3, 3, 2, 2, and 2 respectively. The study finds the dominance of polyester fiber throughout the experiment. The author hopes this study’s outcome will help new researchers, advanced researchers, and the textile industry’s sustainable development research and development team.

Shima Seiki Revolutionizes Intarsia Knitting

SHIMA SEIKI has introducedits new MACH2SIG computerized intarsia shaped knitting machine which,together with improved design system software,

Knitting not Free,Should be Knot-Free

Knitting was the invoked safeguard target in 2005 and continues to be an eyecatcher in 2006. So what can make it a real difference in the days to come, apart from what it has achieved?