Furfural residues derived nitrogen-sulfur co-doped sheet-like carbon: An excellent electrode for dual carbon lithium-ion capacitors

The state-of-the-art lithium-ion capacitors (LICs),consisting of high-capacity battery-type anode and high-rate capacitor-type cathode,can deliver high energy density and large power density when comparing with traditional supercapacitors and lithium-ion batteries,respectively.However,the ion kinetics mismatch between cathode and anode leads to unsatisfied cycling lifetime and anode degradation.Tremendous efforts have been devoted to solving the abovementioned issue.One promising strategy is altering high conductive hard carbon anode with excellent structural stability to match with activated carbon cathode,assembling dual-carbon LIC.In this contribution,one-pot in-situ expansion and heteroatom doping strategy was adopted to prepare sheet-like hard carbon,while activated carbon was obtained involving activation.Ammonium persulfate was used as expanding and doping agent simultaneously.While furfural residues (FR) were served as carbon precursor.The resulting hard carbon (FRNS-HC) and activated carbon (FRNS-AC)show excellent electrochemical performance as negative and positive electrodes in a lithium-ion battery (LIB).To be specific,374.2 m Ah g^(-1)and 123.1 m Ah g^(-1)can be achieved at 0.1 A g^(-1)and 5 A g^(-1)when FRNS-HC was tested as anode.When combined with a highly porous carbon cathode (S_(BET)=2961 m^(2)g^(-1)) synthesized from the same precursor,the LIC showed high specific energy of147.67 Wh kg^(-1)at approximately 199.93 W kg^(-1),and outstanding cycling life with negligible capacitance fading over 1000 cycles.This study could lead the way for the development of heteroatom-doped porous carbon nanomaterials applied to Li-based energy storage applications.

Corrosion behavior of co-gasification slag of furfural residue and coal on alumina-silica refractories

Gasification of furfural residue with coal can realize its efficient and clean utilization.But the high alkali metal content in furfural slag is easy to cause the corrosion of gasifier refractory.Two gasification coals with different silica alumina ratio and a furfural residue were selected in the study.The effects of furfural residue additions on corrosion of silica brick,corundum brick,high alumina brick and mullite brick were investigated by using XRD,SEM-EDS and Factsage Software,and the corrosion mechanism was analyzed.With increasing furfural residue addition,the permeability of the slags to high-aluminium-bearing refractories first decreases and then increases,while the permeability on silica brick shows a slight decrease trend.Leucite(KAlSi_(2)O_(6))with high-melting temperature is generated from the reaction of K_(2)O and SiO_(2)in slag with Al_(2)O_(3)in refractories after furfural residue is added,which hinders the infiltration of slag in refractories.Kaliophilite(KAlSiO_(4))of low-melting point is formed when K_(2)O content increases,and this contributes to the infiltration of slag in refractories.The acid-base reaction between slag and silica brick is distinctly occurred,more slag reacts with SiO_(2)in the silicon brick,resulting in a decrease in the amount of slag infiltrating into the silicon brick as furfural residue is added.The corrosion of silica brick is mainly caused by the acid-base reaction,while the corrosion of three alumina based refractory bricks of corundum,mullite and high alumina brick is determined by slag infiltration.A linear correlation between the percolation rate and slag viscosity is established,the slag permeability increases with decreasing viscosity,resulting in stronger permeability for the high Si/Al ratio slag with lower viscosity.

Principal Chemical Properties of Artificial Soil Composed of Fly Ash and Furfural Residue

To solve soil shortage in reclaiming subsided land of coal mines, the principal chemical properties of artificial soil formed by mixing organic furfural residue and inorganic fly ash were examined. The results indicated that the artificial soil was suitable for agriculture use after irrigation and desalination, the available nutrients in the artificial soil could satisfy the growth demand of plants, and the pH tended to the neutrality.

Converting furfural residue wastes to carbon materials for high performance supercapacitor

Sustainable development based on the value-added utilization of furfural residues(FRs)is an effective way to achieve a profitable circular economy.This comprehensive work highlights the potential of FRs as precursor to prepare porous carbons for high performance supercapacitors(SCs).To improve the electrochemical performance of FR-based carbon materials,a facile route based on methanol pretreatment coupled with pre-carbonization and followed KOH activation is proposed.More defects could be obtained after methanol treatment,which is incline to optimize textural structure.The activated methanol treated FR-based carbon materials(AFRMs)possess high specific surface area(1753.5 m^(2) g^(-1)),large pore volume(0.85 cm^(3) g^(-1)),interconnected micro/mesoporous structure,which endow the AFRMs with good electrochemical performance in half-cell(326.1 F g^(-1) at 0.1 Ag^(-1),189.4 Fg^(-1) at 50 A g^(-1) in 6 mol L^(-1) KOH).The constructed symmetric SCs based on KOH,KOH–K_(3)Fe(CN)_(6) and KOH-KI electrolyte deliver energy density up to 8.9,9.9 and 10.6 Wh kg^(-1) with a capacitance retention of over 86%after 10,000 cycles.Furthermore,the self-discharge can be restrained by the addition of K_(3)Fe(CN)_(6) and KI in KOH electrolyte.This study provides an effective approach for high-valued utilization of FR waste.

Effect of Furfural Residue on Control of Soil Alkalization and Amelioration of Solonetz

Furfural residue, an industrial waste, is a kind of strongly acidic organic materials. Its comprehensive utilization in agriculture showed a significant effect on control of soil alkalization, amelioration of solonetz and increase of crop yields. In detail it may adjust pH, depress alkalinity, reduce bulk density and compactness and increase water permeability and retention ability of the soil. Meanwhile agricultural use of furfural residue provided an effective way to avoid its pollution of the soil, Water and air.

NMR studies of stock process water and reaction pathways in hydrothermal carbonization of furfural residue

Hydrothermal carbonization(HTC) is a valuable approach to convert furfural residue(FR) into carbon material. The prepared biochars are usually characterized comprehensively, while the stock process water still remains to be studied in detail. Herein, a NMR study of the main components in stock process water generated at different HTC reaction conditions was reported. Various qualitative and quantitative NMR techniques(~1H and ^(13)C NMR,~1H-~1H COSY and ~1H-^(13)C HSQC etc.) especially 1D selective gradient total correlation spectroscopy(TOCSY NMR) were strategically applied in the analysis of HTC stock process water. Without separation and purification, it was demonstrated that the main detectable compounds are 5-hydroxymethylfurfural, formic acid, methanol, acetic acid, levulinic acid, glycerol, hydroxyacetone and acetaldehyde in this complicate mixture. Furthermore, the relationship between the concentration of major products and the reaction conditions(180-240 ℃ at 8 h, and 1-24 h at 240 ℃) was established. Finally, reasonable reaction pathways for hydrothermal conversion of FR were proposed based on this result and our previously obtained characteristics of biochars. The routine and challenging NMR methods utilized here would be an alternative other than HPLC or GC for biomass conversion research and can be extended to more studies.

Extraction and Characterization of Biological Humic Acids from Fermented Furfural Residue

Objective] This study aimed to eliminate the negative effects brought about by continuous, long-term accumulation of sodium ions in soil on soil environ-ment. [Method] Biological humic acids （BHAs） were extracted from fermented furfural residue via alkali-dissolution and acidification. The effects of solid-liquid ratio （mass ratio of fermented furfural residue to water）, alkali concentration, extraction tempera-ture and extraction time on the content of BHA were investigated. Also its structure was characterized by FTIR. [Result] The optimal extraction conditions were as fol-lows： solid-liquid ratio of 1：7, KOH concentration of 6%, extraction temperature of 70℃ and extraction time of 1 h. Under the optimal conditions, the content of BHAs extracted was up to 8.5%. The infrared spectrum analysis indicated that BHA had more types of functional groups and lower molecular weight than commercial humic acid although they had similar structures. [Conclusion] The technique has the ad-vantages of simple operation and good stability, and is suitable for extracting BHAs. BHAs have a good prospect in developing new types of humic acid fertilizers.

Study on Extraction of Biological Humic Acids from Fermented Furfural Residue

[Objective] This study was conducted to obtain the optimal process for the preparation of biological humic acids （BHAs） from fermented furfural residue by al- kali-dissolution and acidification. [Method] BHAs were extracted from fermented furfural residue by the alkali-dissolution and acidification method, to investigate the effects of solid-liquid ratio （mass ratio of fermented furfural residue to water）, alkali concentration, extraction temperature and extraction time on the extraction rate of BHAs by an orthogonal experiment, and then a solid BHA product was obtained by acidification of its extract followed by solid-liquid separation and oven-drying. [Result] The results showed that the optimal extracting conditions were as follows： solid-liquid ratio of 1：8, alkali concentration of 8% KOH, with extracting temperature at 70℃ and extracting time of 2.5 h in the alkali-dissolution step, and in the acidification step, the pH of the BHA mixture was 2.5. Under the optimal conditions, the content of solid BHAs was 76%, and the extraction rate of BHAs was 49%. [Conclusion] This study provides a theoretical basis for the separation and purification of BHAs from fermented furfural residue by the alkali dissolution and acidification method.

Adaptability of Alfalfa and Ryegrass to New Reclamation Materials

This paper discussed the adaptability of the alfalfa and ryegrass to the new artificial soil that was composed of fly ash and furfural residue. The potted experiments were taken to compare the growth conditions, yields, and qualities of both grasses. Some pots were covered with wheat stalks and others without. The medium Fluvo-aquic soil was taken as control. The results indicated that the growth of two grasses in the mixture were inferior to their growth in the control in initial period. With the leaching of rain and irrigation, the two grasses improved gradually. The alfalfa and ryegrass both could grow in the new mixture, and the ryegrass would be better to plant in no covered material and the alfalfa in covered. This will be a new way to reclaim subsided land and to imorove the environment in mining area.